Additive manufacturing of ceramics: A review

Journal of Ceramic Science and Technology

Volumn 5, Issue 4, 2014, Pages 245-260

  Deckers, J ^a   Vleugels, J ^a   Kruth, J P ^a  

^a UNIVERSITY OF LEUVEN   (Belgium)

Author keywords

Additive manufacturing; Ceramics; Selective laser melting; Selective laser sintering ; Stereolithography

Indexed keywords

3D PRINTERS; CRACKS; LASER HEATING; MANUFACTURE; MECHANICAL PROPERTIES; SINTERING; STEREOLITHOGRAPHY;

ADDITIVE MANUFACTURING; CERAMIC COMPONENT; CERAMICS; COLLOIDAL PROCESSING; PROCESS PARAMETERS; REVIEW PAPERS; SELECTIVE LASER MELTING; SELECTIVE LASER SINTERING;

CERAMIC MATERIALS;

EID: 84915792833     PISSN: 21909385     EISSN: None     Source Type: Journal    
DOI: 10.4416/JCST2014-00032     Document Type: Review

References (163)

1. ISO/ASTM, 17296 Standard on Additive Manufacturing (AM) Technologies.
2. Kruth, J.-P., Levy, G., Klocke, F., Childs, T.H.C.: Consolidation phenomena in laser and powder-bed based layered manufacturing, CIRP Ann-Manuf. Techn., 56, [2], 730-759, (2007).
3. Mahale, T.H.: Electron beam melting of advanced materials and structures, PhD thesis, North Carolina State University, 2009.
4. Williams, C.B.: Design and development of a layer-based additive manufacturing process for the realization of metal parts of designed mesostructure, PhD thesis, Georgia Institute of Technology, 2008.
5. Sirringhaus, H., Shimoda, T.: Inkjet printing of functional materials, MRS Bull., 28, [11], 802-806, (2003).
6. Ebert, J., Özkol, E., Zeichner, A., Uibel, K., Weiss, Ö., Koops, U., Telle, R., Fischer, H.: Direct inkjet printing of dental prostheses made of zirconia, J. Dent. Res., 88, [7], 673-676, (2009).
7. Özkol, E., Wätjen, A.M., Bermejo, R., Deluca, M., Ebert, J., Danzer, R., Telle, R.: Mechanical characterisation of miniaturised direct inkjet printed 3Y-TZP specimens for microelectronic applications, J. Eur. Ceram. Soc., 30, 3145-3152, (2010).
8. Hon, K.K.B., Li, L., Hutchings, I.M.: Direct writing technology - advantages and developments, CIRP Ann.-Manuf. Techn., 57, 601-620, (2008).
9. Sukeshini, M., Meisenkothen, F., Gardner, P., Reitz, T.L.: Aerosol jet printing of functionally graded SOFC anode interlayer and microstructural investigation by low voltage scanning electron microscopy, J. Power Sources, 224, 295-303, (2013).
10. Grida, I., Evans, J.R.G.: Extrusion free-forming of ceramics through fine nozzles, J. Eur. Ceram. Soc., 23, 629-635, (2003).
11. Yardimci, M.A., Güc¸eri, S.: Conceptual framework for the thermal process modelling of fused deposition, Rapid Prototyping J., 2, [2], 26-31, (1996).
12. Venkataraman, N., Rangarajan, S., Matthewson, M.J., Harper, B., Safari, A., Danforth, S.C., Wu, G., Langrana, N., Guceri, S., Yardimci, A.: Feedstock material property - process relationships in fused deposition of ceramics (FDC), Rapid Prototyping J., 6, [4], 244-253, (2000).
13. Miranda, P., Siaz, E., Gryn, K., Tomsia, A.P.: Sintering and robocasting of beta-tricalcium phosphate scaffolds for orthopaedic applications, Acta Biomater., 2, 457-466, (2006).
14. Bocanegra-Bernal, M.H., Matovic, B.: Dense and near-net-shape fabrication of Si 3N 4 ceramics, Mater. Sci. Eng. A, 500, 130-149, (2009).
15. Cai, K., Roman-Manso, B., Smay, J.E., Zhou, J., Osendi, M.I., Belmonte, M., Miranzo, P.: Geometrically complex silicon carbide structures fabricated by robocasting, J. Am. Ceram. Soc., 95, [8], 2660-2666, (2012).
16. de Hazan, Y., Thänert, M., Trunec, M., Misak, J.: Robotic deposition of 3D nanocomposite and ceramic fiber architectures via UV curable colloidal inks, J. Eur. Ceram. Soc., 32, 1187-1198, (2012).
17. Li, J.P., Habibovic, P., van den Doel, M., Wilson, C.E., de Wijn, J.R., van Blitterswijk, C.A., de Groot, K.: Bone ingrowth in porous titanium implants produced by 3D fiber deposition, Biomaterials, 28, 2810-2820, (2007).
18. King, B.H., Dimos, D., Yang, P., Morissette, S.L.: Direct-write fabrication of integrated, multilayer ceramic components, J. Electroceram., 3, [2], 173-178, (1999).
19. Travitzky, N., Bonet, A., Dermeik, B., Fey, T., Filbert-Demut, I., Schlier, L., Schlordt, T., Greil, P.: Additive manufacturing of ceramic-based materials, Adv. Eng. Mater., 16, [6], 729-754, (2014).
20. Leu, M.C., Tang, L., Deuser, B., Landers, R.G., Hilmas, G.E., Zhang, S., Watts, J.: Freeze-form extrusion fabrication of composite structures, SFF Symposium, 2011.
21. Leu, M.C., Garcia, D.A.: Development of freeze-form extrusion fabrication with use of sacrificial material, SFF Symposium, Texas, 2013.
22. Balla, V.K., Bose, S., Bandyopadhyay, A.: Processing of bulk alumina ceramics using laser engineered net shaping, Int. J. Appl. Ceram. Technol., 5, [3], 234-242, (2008).
23. 4V/TiC composites using simultaneous powder and wire feed, Mater. Sci. Eng. A, 445, 461-466, (2007).
24. Agarwala, M., Klosterman, D., Osborne, N., Lightman, A.: Hard metal tooling via SFF of ceramics and powder metallurgy, SFF Symposium, Texas, 1999.
25. Gomes, C.M., Oliveira, A.P.N., Hotza, D., Travitzky, N., Greil, P.: LZSA glass-ceramic laminates: Fabrication and mechanical properties, J. Mater. Process. Tech., 206, 194-201, (2008).
26. Sachs, E.M., Haggerty, J.S., Cima, M.J., Williams, P.A.: United States patent 5.204.055: Three-dimensional printing techniques, (1993).
27. Cima, M.J., Sachs, E.M.: Three dimensional printing: Forms, materials and performance, SFF symposium, Texas, 1991.
28. Kruth, J., Leu, M., Nakagawa, T.: Progress in additive manufacturing and rapid prototyping, CIRP Ann-Manuf. Techn., 47, [2], 525-540, (1998).
29. ExOne: http://www.exone.com/.
30. 3DSystems: http://www.3dsystems.com/.
31. Wilkes, J., Wissembach, K.: Rapid manufacturing of ceramic components for medical and technical applications via selective laser melting, Proceedings of the Euro-uRapid conference, Frankfurt, 2006, A4/1.
32. Wilkes, J.: Fraunhofer ILT annual report: Manufacturing of ceramic components by selective laser melting, Fraunhofer ILT, 2006.
33. Wilkes, J.: Selective laser melting for generative production of components from high-strength oxide ceramics, (in German), PhD thesis, Fraunhofer ILT, 2009.
34. Hagedorn, Y.C., Balachandran, N., Meiners, W., Wissembach, K., Poprawe, R.: SLM of net-shaped high strength ceramics: New opportunities for producing dental restaurations, Proceedings of the SFF symposium, Texas, 2011.
35. 2-ceramic parts by selective laser melting, Proceedings of the 5th International Conference on Additive Manufacturing, Loughborough University, 2010.
36. Hagedorn, Y.-C., Wilkes, J., Meiners, W., Wissembach, K., Poprawe, R.: Net shaped high performance oxide ceramic parts by selective laser melting, Physics procedia, 5, 587-594, (2010).
37. Lakiza, S.M., Lopato, L.M.: Stable and metastable phase relations in the system alumina-zirconia-yttria, J. Am. Ceram. Soc., 80, [4], 893-902, (1997).
38. Dierkes, S., Faber, A.J., Wilkes, J., Welters, M.P.M., Meiners, W., Wissembach, K.: International patent WO 2011/018463A1: Ceramic or glass-ceramic article and methods for producing such article, (2011).
39. Dierkes, S., Faber, A.J., Wilkes, J., Welters, M.P.M., Meiners, W., Wissembach, K.: European patent EP2292357A1: Ceramic or glass-ceramic article and methods for producing such article, (2011).
40. Hagedorn, Y.: Event: High-end applications for additive manufacturing: Selective laser melting of net-shaped oxide ceramics, Fraunhofer-ILT, 2013.
41. Shishkovsky, I., Yadroitsev, I., Bertrand, P., Smurov, I.: Alumina-zirconium ceramics synthesis by selective laser sintering/melting, Appl. Surf. Sci., 254, 966-970, (2007).
42. Tang, H.H.: Method and apparatus for making three-dimensional parts, Google Patents, (2010).
43. Tang, H.H.: Direct laser fusion to form ceramic parts, Rapid Prototyping J., 8, [5], 284-289, (2002).
44. Tang, H.H., Yen, H.C., Lin, W.H.: On ceramic parts fabricated rapid prototyping machine based on ceramic laser fusion, SFF Symposium, Texas, 2003.
45. Tang, H.H., Yen, H.C., Su, S.M., Lin, Z.Y.: Prospect of making ceramic shell mold by ceramic laser fusion, SFF Symposium, Texas, 2004.
46. Yen, H.C., Tang, H.H.: Study on direct fabrication of ceramic shell mold with slurry-based ceramic laser fusion and ceramic laser sintering, Int. J. Adv. Manuf. Technol., 60, 1009-015, (2012).
47. Wu, Y., Du, J., Choy, K.-L., Hench, L.L.: Laser densification of alumina powder beds generated using aerosol assisted spray deposition, J. Eur. Ceram. Soc., 27, 4727-4735, (2007).
48. Deckard, C.R., Beaman, J.J., Darrah, J.F.: Method of producing parts, Patent WO1992008567A1, (1992).
49. Lakshminarayan, U., Ogrydiziak, S., Marcus, H.L.: Selective laser sintering of ceramic materials, SFF Symposium, Texas, 1990.
50. 3 composites fabricated by selective laser sintering, SFF Symposium, Texas, 1991.
51. Bertrand, P., Bayle, F., Combe, C., Goeuriot, P., Smurov, I.: Ceramic components manufacturing by selective laser sintering, Appl. Surf. Sci., 254, 989-992, (2007).
52. Lorrison, J.C., Dalgarno, K.W., Wood, D.J.: Processing of an apatite-mullite glass-ceramic and an hydroxyapatite/phosphate glass composite by selective laser sintering, J. Mater. Sci.: Mater. M., 16, 775-781, (2005).
53. Gu, D., Shen, Y.: Direct laser sintered WC-10Co/Cu nanocomposites, Appl. Surf. Sci., 254, 3971-3978, (2008).
54. 2 dental ceramic components by layer-wise slurry deposition, J. Am. Ceram. Soc., 89, [10], 3076-3080, (2006).
55. Bergstrom, L.: Colloidal processing of ceramics, in 'Handbook of Applied Surface and Colloid Chemistry', (ed. K. Holmberg), John Wiley & Sons, 2001.
56. Deckers, J., Shahzad, K., Vleugels, J., Kruth, J.: Isostatic pressing assisted indirect selective laser sintering of alumina components, Rapid Prototyping J., 18, [5], 409-419, (2012).
57. Heinrich, J.G.: LSD-based selective laser sintering, cfi/Ber.DKG, 86, [10], E129-E130, (2009).
58. Tian, X., Günster, J., Melcher, J., Li, D., Heinrich, J.G.: Process parameters analysis of direct Laser Sintering and post treatment of porcelain components using Taguchi's method, J. Eur. Ceram. Soc., 29, 1903-1915, (2009).
59. Tian, X., Li, D., Heinrich, J.G.: Rapid prototyping of porcelain products by layer-wise slurry deposition (LSD) and direct laser sintering, Rapid Prototyping J., 18, 362-373, (2012).
60. Tian, X., Sun, B., Heinrich, J.G., Li, D.: Stress relief mechanism in layer-wise laser directly sintered porcelain ceramics, Mater. Sci. Eng. A, 527, 1695-1703, (2010).
61. 2 system, J. Mater. Sci., 42, 5307-5311, (2007).
62. Yen, H.-C.: A new slurry-based shaping process for fabricating ceramic green part by selective laser scanning the gelled layer, J. Eur. Ceram. Soc., 32, 3123-3128, (2012).
63. Klocke, F., Derichs, C., Ader, C., Demmer, A.: Investigations on laser sintering of ceramic slurries, Prod. Eng. Res. Devel., 1, 279-284, (2007).
64. Exner, H., Regenfuss, P., Hartwig, L., Klötzer, S., Ebert, R.: Selective laser micro sintering with a novel process, Proceedings of the 4th International Symposium on Laser Precision Microfabrication, 145-151, 2003.
65. rdInternational Congress on Applications of Lasers and Electro-Optics (ICALEO 2004), San Francisco (CA, USA), 2004.
66. Regenfuss, P., Hartwig, L., Klötzer, S., Ebert, R.: Industrial freeform generation of microtools by laser micro sintering, Rapid Prototyping J., 11, [1], 18-25, (2005).
67. 2004/076101 A2: Method and device for producing miniature bodies or microstructured bodies, (2004).
68. Exner, H., Regenfuss, P., Ebert, R.: Laser micro sintering - a versatile instrument for the generation of microparts, Laser Technik Journal, 1, 26-31, (2007).
69. Regenfuss, P., Streek, A., Hartwig, L., Klötzer, S., Brabant, T., Horn, M., Ebert, R., Exner, H.: Principles of laser micro sintering, Proceedings of the 17th annual SFF Symposium, Texas, 740-753, 2006.
70. Streek, A., Regenfuss, P., Ebert, R., Exner, H.: Laser micro sintering - upgrade of the technology, Proceedings of the ICALEO conference, Orlando (FL, USA), 2009.
71. Regenfuss, P., Streek, A., Hartwig, L., Klötzer, S., Brabant, T., Horn, M., Ullmann, F., Ebert, R., Exner, H.: Material depending mechanisms in laser micro sintering, Proceedings of the 5th LANE conference, Erlangen, 2007, 403-418.
72. Exner, H., Regenfuss, P., Ebert, R., Hartwig, L., Streek, A., Klötzer, S., Horn, M.: Laser microsintering of ceramic materials, (in German), RTejournal - Forum für Rapid Technologie, 3, 1-18, (2006).
73. Regenfuss, P., Streek, A., Hartwig, L., Horn, M., Klötzer, S., Ebert, R., Exner, H.: Freeform fabrication of dental inlays by laser micro-sintering, The laser user magazine, 52, 36-38, (2008).
74. Regenfuss, P., Streek, A., Ullmann, F., Hartwig, L., Horn, M., Kühn, C., Ebert, R., Exner, H.: Laser microsintering - reaction models and results, cfi/Ber.DKG, 85, [13], 65-72, (2008).
75. Regenfuss, P., Streek, A., Ullmann, F., Kühn, C., Hartwig, L., Horn, M., Ebert, R., Exner, H.: Laser micro sintering of ceramic materials, part 2, Interceram, 57, 6-9, (2008).
76. Exner, H., Horn, M., Streek, A., Ullmann, F., Hartwig, L., Regenfuss, P., Ebert, R.: Laser micro sintering: A new method to generate metal and ceramic parts of high resolution with sub-micrometer powder, Virtual and Physical Prototyping, 3, [1], 3-11, (2008).
77. Streek, A., Regenfuss, P., Ullmann, F., Hartwig, L., Ebert, R., Exner, H.: Processing of silicon carbide by laser micro sintering, SFF Symposium, Texas, 349-358, 2006.
78. Deckers, J., Meyers, S., Wijremblewski, B., Kruth, J.-P., Vleugels, J.: Direct selective laser sintering/melting of high density alumina powder layers at elevated temperatures, 8th International Conference on Photonic Technologies LANE 2014, Fürth, Physics Procedia, 117-124, 2014.
79. Deckers, J., Meyers, S., Wijremblewski, B., Vleugels, J., Kruth, J.-P.: Direct selective laser sintering/melting of fine grained alumina with a novel experimental setup, Mater. Sci. Tech.: Special issue on 3D printing, 2014 (Submitted).
80. Wijremblewski, B.: Testing an experimental setup for the selective laser sintering of technical ceramics (master thesis), KU Leuven, 2013.
81. Bertrand, P., Yadroitsev, I., Smurov, I.: Rapid prototyping and direct fabrication by laser of multimaterial and mulitfunctional objects, (in French), Dixième assisses Europ. de Prototypage Rapide, 2004.
82. Birmingham, B.R., Marcus, H.L.: Solid freeform fabrication of silicon nitride shapes by selective laser reaction sintering (SLRS), SFF Symposium, Texas, 1995.
83. Klocke, F., Wirtz, H.: Selective laser sintering of ceramics, Laser Assisted Net Shape Engineering (LANE) conference, Erlangen, 1997.
84. Tang, H.H.: Ceramic laser sintering - optimization of ceramic rapid prototyping, Technical report of the National Taipei University of Technology in Taiwan, 1993.
85. Barlow, J.W., Vail, N.K.: International patent WO 93/19019: Producing high-temperature parts by low-temperature sintering, (1993).
86. Liu, Z.H., Nolte, J.J., Packard, J.I., Hilmas, G., Dogan, F., Leu, M.C.: Selective laser sintering of high density alumina ceramic parts, Proceedings of the 35th MATADOR conference, Taipei (Taiwan), 351-354, 2007.
87. Deckers, J., Kruth, J., Shahzad, K., Vleugels, J.: Density improvement of alumina parts produced through selective laser sintering of alumina-polyamide composite powder, CIRP Ann. Manuf. Techn., 61, [1], 211-214, (2012).
88. Rombouts, M., Deckers, J., Thijs, I., Deckx, J., Kruth, J.- P.: Wax based binder for indirect selective laser sintering of alumina, 5th International PMI Conference, Ghent (Belgium), 184-188, 2012.
89. Shahzad, K., Deckers, J., Kruth, J.-P., Vleugels, J.: Additive manufacturing of alumina parts by indirect selective laser sintering and post processing, J. Mater. Process. Tech., 213, [9], 1484-1494, (2013).
90. Subramanian, K., Vail, N., Barlow, J. Marcus, H.: Selective laser sintering of alumina with polymer binders, Rapid Prototyping J., 1, [2], 24-35, (1995).
91. Deckers, J., Kruth, J., Cardon, L., Shahzad, K., Vleugels, J.: Densification and geometrical assessments of alumina parts produced through indirect selective laser sintering of aluminapolystyrene composite powder, Stroj. Vestn. - J. Mech. E, 59, [11], 646-661, (2013).
92. Shahzad, K., Deckers, J., Boury, S., Neirinck, B., Kruth, J., Vleugels, J.: Preparation and indirect selective laser sintering of alumina/PA microspheres, Ceram. Int., 38, 1241-1247, (2012).
93. 2, J. Mater. Sci. Lett., 21, 209-212, (2002).
94. Lee, I.: Rapid full densification of alumina-glass composites fabricated by a selective laser sintering process, J. Mater. Sci. Lett., 17, 1907-1911, (1998).
95. 2/TiC ceramic powder, Trans. Nonferrous Met. Soc. China, 15, [2], 261-265, (2005).
96. Goodridge, R.D., Wood, D.J., Ohtsuki, C., Dalgarno, K.W.: Biological evaluation of an apatite-mullite glass-ceramic produced via selective laser sintering, Acta Biomater., 3, 221-231, (2007).
97. Chakravarthy, K.M., Bourell, D.L.: Binder development for indirect SLS of non metallics, Proceedings of the SFF Symposium, Texas, 2010.
98. Liu, J., Zhang, B., Yan, C., Shi, Y.: The effect of processing parameters on characteristics of Selective Laser Sintering dental glass-ceramic powder, Rapid Prototyping J., 16, [2], 138-145, (2010).
99. Evans, R.S.: Indirect rapid manufacturing of silicon carbide composites, PhD thesis, The University of Texas Austin, 2005.
100. Stevinson, B., Bourell, D.L., Beaman, J.J.: Dimensional stability during post-processing of selective laser sintered ceramic preforms, Virtual and Physical Prototyping, 1, [4], 209-216, (2006).
101. Stevinson, B.Y., Bourell, D.L., Beaman, J.J.: Support-free infiltration of selective laser sintered (SLS) silicon carbide preforms, SFF Symposium, Texas, 359-365, 2006.
102. Shahzad, K., Deckers, J., Zhang, Z., Kruth, J.-P., Vleugels, J.: Additive manufacturing of zirconia parts by indirect selective laser sintering, J. Eur. Ceram. Soc., 34, [1], 81-89, (2014).
103. Leu, M.C., Pattnaik, S., Hilmas, G.E.: Investigation of laser sintering for freeform fabrication of zirconium diboride parts, Virtual and Physical Prototyping, 7, [1], 25-36, (2012).
104. Leu, M.C., Adamek, E.B., Huang, T., Hilmas, G.E., Dogan, F.: Freeform fabrication of zirconium diboride parts using selective laser sintering, SFF Symposium, Texas, 2008.
105. Leu, M.C., Pattnaik, S., Hilmas, G.E.: Optimization of selective laser sintering process for fabrication of zirconium diboride parts, SFF Symposium, Texas, 2010.
106. Shahzad, K.: Powder-based indirect selective laser sintering of ceramics (doctoral thesis), PhD thesis, KU Leuven, 2013.
107. Deckers, J.: Selective laser sintering and melting as additive manufacturing methods to produce alumina parts; 3D printing of ceramics (doctoral thesis), PhD thesis, KU Leuven, 2013.
108. Cardon, L., Deckers, J., Verberckmoes, A., Ragaert, K., Delva, L., Shahzad, K., Vleugels, J., Kruth, J.: Polystyrene-coated alumina powder via dispersion polymerization for indirect selective laser sintering applications, J. Appl. Polym. Sci., 128, [3], 2121-2128, (2013).
109. Gill, T.J., Hon, K.K.B.: Experimental investigations into the selective laser sintering of silicon carbide polyamide composites, proc. IMechE, Part B: Journal of Engineering Manufacture, 218, [10], 1249-1256, (2004).
110. Evans, R.S., Bourell, D.L., Beaman, J.J., Campbell, M.I.: Rapid manufacturing of silicon carbide composites, Rapid Prototyping J., 11, 37-40, (2005).
111. Tang, H.H.: Building ultra-thin layers by ceramic laser sintering, Mater. Trans., 47, [3], 889-897, (2006).
112. Yen, H.C., Chiu, M.-L., Tang, H.H.: Laser scanning parameters on fabrication of ceramic parts by liquid phase sintering, J. Eur. Ceram. Soc., 29, 1331-1336, (2009).
113. Yen, H.C., Tang. H.H.: Developing a paving system for fabricating ultra-thin layers in ceramic laser rapid prototyping, Int. J. Adv. Manuf. Technol., 36, 280-287, (2008).
114. Tang, H.H., Chiu, M.-L., Yen, H.C.: Slurry-based selective laser sintering of polymer-coated ceramic powders to fabricate high strength alumina parts, J. Eur. Ceram. Soc., 31, 1383-1388, (2011).
115. Yen, H.C., Tang. H.H., Wu, C.H.: Improving staircase effect in the process of ceramic laser gelling, Adv. Mat. Res., 284-286, 43-47, (2011).
116. Liu, F.H.: Manufacturing porous multi-channel ceramic by laser gelling, Ceram. Int., 37, 2789-2794, (2011).
117. Liu, F.H., Liao, Y.S.: Fabrication of inner complex ceramic parts by selective laser gelling, J. Eur. Ceram. Soc., 30, 3283-3289, (2010).
118. Tang, H.H., Liu, F.H.: Ceramic laser gelling, J. Eur. Ceram. Soc., 25, 627-632, (2006).
119. Bae, C.J., Halloran, J.A.: Integrally cored ceramic mold fabricated by ceramic stereolithography, Int. J. Appl. Ceram. Technol., 8, [6], 1255-1262, (2011).
120. Zhou, W., Li, D., Wang, H.: A novel aqueous ceramic suspension for ceramic stereolithography, Rapid Prototyping J., 16, [1], 29-35, (2010).
121. Lithoz GmbH: Folder at Euromold 2012 (Frankfurt), Personal communication, 2012.
122. Griffith, M.L., Halloran, J.W.: Freeform fabrication of ceramics via stereolithography, J. Am. Ceram. Soc., 79, [10], 2601-2608, (1996).
123. Halloran, J.W., Tomeckova, V., Gentry, S., Das, S., Cilino, P., Yuan, D., Guo, R., Rudraraju, A., Shao, P., Wu, T., Alabi, T.R., Baker, W., Legdzina, D., Wolski, D., Zimbeck, W.R., Long, D.: Photopolymerization of powder suspensions for shaping ceramics, J. Eur. Ceram. Soc., 31, 2613-2619, (2011).
124. Clarinval, A.M., Carrus, R., Dormal, T.: European patent 1.434.089A1: Photo-polymerisable paste compositions, (2004).
125. Fischer, K., Moszner, N., Rheinberger, V., Wachter, W., Homa, J., Längle, W.: Patent no. 20120010066: Light-curing ceramic slips for the stereolithographic preparation of high-strength ceramics, (2012).
126. Halloran, J.W., Griffith, M., Chu, T.M.: United States patent 6.117.612: Stereolithography resin for rapid prototyping of ceramics and metals, (2000).
127. Moszner, N., Wachter, W., Christoph, A., Rheinberger, V.M., Liska, R., Stampfl, J., Patzer, J.: United States patent 7.927.538B2: Licht-curing slips for the stereolithographic preparation of dental ceramics, (2011).
128. 2007/063014: Verfahren zum herstellen keramischer Gusswerkzeuge (Method for producing ceramic casting tools), (2007).
129. Wang, Y.: United States patent 2003/0180665 A1: Ionization radiation imageable photopolymer compositions, (2003).
130. Bertsch, A., Jiguet, S., Renaud, P.: Microfabrication of ceramic components by microstereolithography, J. Micromech. Microeng., 14, 197-203, (2004).
131. Wang, J.-C.: A novel fabrication method of high strength alumina ceramic parts based on solvent-based slurry stereolithography and sintering, Int. J. Precis. Eng. Man., 14, [3], 485-491, (2013).
132. de Hazan, Y., Heinecke, J., Weber, A., Graule, T.: High solids loading ceramic colloidal dispersions in UV curable media via comb-polyelectrolyte surfactants, J. Colloid Interf. Sci., 337, 66-74, (2009).
133. Jacobs, P.F.: Rapid prototyping & manufacturing - fundamentals of stereolithography 29 - 33; Society of Manufacturing Engineers, 1992.
134. Badev, A., Abouliatim, Y., Chartier, T., Lecamp, L., Lebaudy, P., Chaput, C., Delage, C.: Photopolymerization kinetics of a polyether acrylate in the presence of ceramic fillers used in stereolithography, J. Photoch. Photobio. A, 222, 117-122, (2011).
135. Chartier, T., Badev, A., Abouliatim, Y., Lebaudy, P., Lecamp, L.: Stereolithography process: Influence of the rheology of silica suspensions and of the medium on polymerization kinetics - cured depth and width, J. Photoch. Photobio. A, 32, 1625-1634, (2012).
136. Tomeckova, V., Halloran, J.W.: Critical energy for photopolymerization of ceramic suspensions in acrylate monomers, J. Eur. Ceram. Soc., 30, 3273-3282, (2010).
137. Tomeckova, V., Halloran, J.W.: Cure depth for photopolymerization of ceramic suspensions, J. Eur. Ceram. Soc., 30, 3023-3033, (2010).
138. Tomeckova, V., Halloran, J.W.: Predictive models for the photopolymerization of ceramic suspensions, J. Eur. Ceram. Soc., 30, 2833-2840, (2010).
139. Doreau, F., Chaput, C., Chartier, T.: Stereolithography for manufacturing ceramic parts, Adv. Eng. Mater., 2, [8], 493-496, (2000).
140. Tesavibul, P., Felzmann, R., Gruber, S., Liska, R., Thompson, I., Boccaccini, A.R., Stampfl, J.: Processing of 45S5 Bioglass by lithography-based additive manufacturing, Mater. Lett., 74, 81-84 (2012).
141. Chartier, T., Chaput, C., Doreau, F., Loiseau, M.: Stereolithography of structural complex ceramic parts, J. Mater. Sci., 37, 3141-3147, (2002).
142. 3DCeram, http://3dceram.com.
143. Sirris, http://www.sirris.be.
144. Clarinval, A.M.: Production of metallic and ceramic parts with the optoform process, 2006.
145. Formatec, http://www.formatec.nl/.
146. TUWien, http://www.tuwien.ac.at.
147. Ivoclar-Vivadent, http://www.ivoclarvivadent.com.
148. Maalderink, H.: Event: High-end applications for additive manufacturing: SLA processing of highly filled resins, TNO Delft, 2013.
149. Bae, C.J., Halloran, J.W.: Influence of residual monomer on cracking in ceramics fabricated by stereolithography, Int. J. Appl. Ceram. Technol., 8, [6], 1289-1295, (2011).
150. Bruijcker, M.D.: Press release of Admatec Europe BV: Four new printers installed for series production of functional ceramic components; printing ceramics proves to be a production solution. 2014.
151. Bertsch, A., Jiguel, S., Hofmann, H., Renaud, P.: Ceramic microcomponents by microstereolithography, IEEE, 725-728, (2004).
152. Provin, C., Monneret, S., Gall, H.L., Corbel, S.: Three-dimensional ceramic microcomponents made using microstereolithography, Adv. Mater., 15, [12], 994-997, (2003).
153. Nold, A., Zeiner, J., Assion, T., Clasen, R.: Electrophoretic deposition as rapid prototyping method, J. Eur. Ceram. Soc., 30, 1163-1170, (2010).
154. 3 ceramic, SFF Symposium, Texas, 2014.
155. Deckers, J., Cardon, L., Shahzad, K., Vleugels, J., Kruth, J.: Production of alumina parts through indirect selective laser sintering of alumina-polystyrene composite powder, 5th International Conference on Polymers and Moulds Innovations (PMI), Ghent (Belgium), 178- 183, 2012.
156. 4 formed by fused deposition of ceramics, Int. J. Appl. Ceram. Tech., 5, [2], 127-137, (2008).
157. Yoo, J., Cima, M.J., Khanuja, S., Sachs, E.M.: Structural ceramic components by 3D printing, SFF Symposium, Texas, 1993.
158. Liu, Z.E., Ko, T.C., Best, J., Cawley, J.D., Heuer, A.H.: CAMLEM processing: Materials flexibility, SFF Symposium, Texas, 1997.
159. Griffin, E.A., Mumm, D.R., Marshall, D.B.: Rapid prototyping of functional ceramic composites, Am. Ceram. Soc. Bull., 75, 65, (1996).
160. Rodrigues, S., Chartoff, R., Klostermann, D., Agarwala, M., Hecht, N.: Solid freeform fabrication of functional silicon nitride ceramics by laminated object manufacturing, Proceedings of the SFF Symposium, Texas, 2000.
161. Klosterman, D., Chartoff, R., Osborne, N., Graves, G.: Automated fabrication of monolithic and ceramic matrix composites via laminated object manufacturing (LOM), SFF Symposium, Texas, 1997.
162. Weisensel, L., Windsheimer, H., Travitzky, N., Greil, P.: Laminated object manufacturing (LOM) of SiSiC-composites, cfi/Ber. DKG, 13, 31-35, (2006).
163. Kruth, J.: Material incress manufacturing by rapid prototyping techniques, CIRP Ann.-Manuf. Techn., 40, [2], 603-614, (1991). (1991).