Robotic deposition of 3d nanocomposite and ceramic fiber architectures via UV curable colloidal inks

Journal of the European Ceramic Society

Volumn 32, Issue 6, 2012, Pages 1187-1198

  de Hazan, Yoram ^a   Thänert, Madlen ^a,b   Trunec, Martin ^c   Misak, Jiri ^a,c  

^a SWISS FEDERAL LABORATORIES FOR MATERIALS SCIENCE AND TECHNOLOGY   (Switzerland)

^b Hochschule fur Technik und Wirtschaft   (Germany)

^c BRNO UNIVERSITY OF TECHNOLOGY   (Czech Republic)

Author keywords

3d robotic deposition; Fiber network; Hydroxyapatite; Shaping; UV

Indexed keywords

3D ARCHITECTURES; 3D FIBERS; ALUMINA FIBER; BIOMEDICAL APPLICATIONS; CATALYTIC REACTOR; COLLOIDAL INKS; FIBER ARCHITECTURE; FIBER NETWORK; FUNCTIONALIZED; HIGH ASPECT RATIO; PHOTOCATALYTIC ACTIVITIES; ROBOTIC DEPOSITION; ROOM TEMPERATURE DEPOSITION; SHAPING; SINTERING PROCEDURES; SOLVENT FREE; THERMAL DEBINDING; TIO; UV; UV CURABLE; VISCOELASTIC PROPERTIES;

APATITE; ARCHITECTURE; ASPECT RATIO; CERAMIC FIBERS; FIBER OPTIC NETWORKS; HYDROXYAPATITE; MEDICAL APPLICATIONS; PHOTOCATALYSIS; SINTERED ALUMINA; SINTERING; SOLIDIFICATION; SURFACE ACTIVE AGENTS; TITANIUM DIOXIDE; ULTRAVIOLET RADIATION;

ROBOTICS;

EID: 84856600226     PISSN: 09552219     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jeurceramsoc.2011.12.007     Document Type: Article

References (33)

1. Gibson I., Rosen D.W., Stucker B. Additive manufacturing technologies: rapid prototyping to direct digital manufacturing 2010, Springer, New York.
2. Brady G.A., Halloran J.W. Stereolithography of ceramic suspensions. Rapid Prototyping J 1997, 3:61-65.
3. Chartier T., Duterte C., Delhote N., Baillargeat D., Verdeyme S., Delage C., et al. Fabrication of millimeter wave components via ceramic stereo- and microstereolithography processes. J Am Ceram Soc 2008, 91:2469-2474.
4. Smay J.E., Cesarano J., Lewis J.A. Colloidal inks for directed assembly of 3-d periodic structures. Langmuir 2002, 18:5429-5437.
5. Lewis J.A. Direct ink writing of 3d functional materials. Adv Funct Mater 2006, 16:2193-2204.
6. Huang T., Mason M.S., Hilmas G.E., Leu M.C. Freeze-form extrusion fabrication of ceramic parts. J Virtual Physical Prototyping 2006, 1:93-100.
7. Duoss E.B., Twardowski M., Lewis J.A. Sol-gel inks for direct-write assembly of functional oxides. Adv Mater 2007, 19:3485-3489.
8. Luyten J., Mullens S., Thijs I. Designing with pores-synthesis and applications. KONA Powder Part J 2010, 28:131-142.
9. Yang H., Yang S., Chi X., Julian R., Evans G. Fine ceramic lattices prepared by extrusion freeforming. J Biomed Mater Res B: Appl Biomater 2006, 79B:116-121.
10. Ravelingien M., Hervent A.S., Mullens S., Luyten J., Vervaet C., Remon J.P. Influence of surface topography and pore architecture of alkali-treated titanium on in vitro apatite deposition. Appl Surf Sci 2010, 256:3693-3697.
11. Van Noyen J., Mullens S., Snijkers F., Luyten J. Catalyst design with porous functional structures. Sustainable chemistry, WIT transactions on ecology and the environment 2011, 154:93-102. WIT Press.
12. Stuecker J.N., Miller J.E., Ferrizz R.E., Mudd J.E., Cesarano J. Advanced support structures for enhanced catalytic activity. Ind Eng Chem Res 2004, 43:51-56.
13. Rao R.B., Krafcik K.L., Morales A.M., Lewis J.A. Microfabricated deposition nozzles for direct-write assembly of three-dimensional periodic structures. Adv Mater 2006, 17:289-293.
14. Moronia L., Schotel R., Sohier J., de Wijn J.R., van Blitterswijk C.A. Polymer hollow fiber three-dimensional matrices with controllable cavity and shell thickness. Biomaterials 2006, 27:5918-5926.
15. Hutmacher D.W., Sittinger M., Risbud M.V. Scaffold-based tissue engineering: rationale for computer-aided design and solid free-form fabrication systems. Trends Biotechnol 2004, 22:354-362.
16. Michna S., Wu W., Lewis J.A. Concentrated hydroxyapatite inks for direct-write assembly of 3-D periodic scaffolds. Biomaterials 2005, 26:5632-5639.
17. Suwanprateeb J., Sanngam R., Panyathanmaporn T. Influence of raw powder preparation routes on properties of hydroxyapatite fabricated by 3D printing technique. Mater Sci Eng C 2010, 30:610-617.
18. Barry R.A., Shepherd R.F., Hanson J.N., Nuzzo R.G., Wiltzius P., Lewis J.A. Direct-write assembly of 3d hydrogel scaffolds for guided cell growth. Adv Mater 2009, 21:1-4.
19. Ahn B.Y., Shoji D., Hansen C.J., Hong E., Dunand D.C., Lewis J.A. Printed origami structures. Adv Mater 2010, 22:2251-2254.
20. Smay J.E., Cesarano J., Tuttle B.A., Lewis J.A. Directed colloidal assembly of linear and annular lead zirconate titanate arrays. J Am Ceram Soc 2004, 87:293-295.
21. Lebel L.L., Aissa B., El Khakani M.A., Therriault D. Ultraviolet-assisted direct-write fabrication of carbon nanotube/polymer nanocomposite microcoils. Adv Mater 2010, 22:592-596.
22. de Hazan Y., Graule T., Thänert M. 3d nano-composite and ceramic architectures via robotic deposition of UV curable inks. Eur Cells Mater 2011, 22:35.
23. de Hazan Y, Graule T, Müller G. Process and device for manufacturing shaped composite, the shaped composite and the shaped inorganic article derived from it. PCT/CH2009/000322, WO/2010/040243.
24. de Hazan Y., Wozniak M., Heinecke J., Müller G., Graule T. New microshaping concepts for ceramic/polymer nanocomposite and nanoceramic fibers. J Am Ceram Soc 2010, 93:2456-2459.
25. de Hazan Y., Märkl V., Heinecke J., Aneziris C., Graule T. Functional ceramic and nanocomposite fibers, cellular articles and microspheres via radiation curable colloidal dispersions. J Eur Ceram Soc 2011, 31:2601-2611.
26. de Hazan Y., Heinecke J., Weber A., GrauleT. High solids loading ceramic colloidal dispersions in UV curable media via comb-polyelectrolyte surfactants. J Colloid Interface Sci 2009, 337:66-74.
27. Straue N., Rauscher M., Walther S., Faber H., Roosen A. Preparation and soft lithographic printing of nano-sized ITO-dispersios for the manufacture of electrodes for TFTs. J Mater Sci 2009, 14:6011-6019.
28. Ritter A., Reifler F.A., Michel E. Quick screening method for the photocatalytic activity of textile fibers and fabrics. Text Res J 2010, 80:604-610.
29. Flatt R.J., Bowen P. YODEL: a Yield stress mODEL for suspensions. J Am Ceram Soc 2006, 89:1244-1256.
30. Houst Y.F., Bowen P., Perche F., Kauppi A., Borget P., Galmichei L., et al. Design and function of novel superplasticizers for more durable high performance concrete (Superplast project). Cem Concr Res 2008, 38:1197-1209.
31. Yubao L., Klein C.P.A.T., Xingdong Z., de Groot K. Relationship between the colour change of hydroxyapatite and the trace element manganese. Biomaterials 1993, 14:969-972.
32. O'Brien A.K., Bowman C.N. Impact of oxygen on photopolymerization kinetics and polymer structure. Macromolecules 2006, 39:2501-2506.
33. 2 for photocatalytic applications. Mater Lett 2009, 63:461-463.