Dense and near-net-shape fabrication of Si3N4 ceramics

Materials Science and Engineering: A

Volumn 500, Issue 1-2, 2009, Pages 130-149

  Bocanegra Bernal, M H ^a   Matovic, B ^b  

^a CENTRO DE INVESTIGACIÓN EN MATERIALES AVANZADOS   (Mexico)

^b UNIVERSITY OF BELGRADE   (Serbia)

Author keywords

Aqueous slurries; Gelcasting; Injection molding; Robocasting; Silicon nitride

Indexed keywords

AUTOMOTIVE INDUSTRY; CERAMIC MATERIALS; DEFECTS; FABRICATION; INJECTION MOLDING;

AQUEOUS SLURRIES; COMPLEX SHAPED COMPONENT; COMPONENT DESIGN; DESIGN PROBLEMS; GEL-CASTING; HIGHEST TEMPERATURE; INNOVATIVE SOLUTIONS; NEAR NET SHAPE; NEW SOLUTIONS; ROBOCASTING;

SILICON NITRIDE;

EID: 57149112302     PISSN: 09215093     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.msea.2008.09.015     Document Type: Article

References (297)

1. T. Takatori, T. Honma, N. Kamiya, H. Masaki, S. Sasaki, S. Wada, ASME Paper 91-GT-142, 1991.
2. A. Pfeiffer, A. Schulz, S. Witting, ASME Paper 91-GT-63, 1991.
3. Danforth S.C., Symons W., Nilsen K.J., and Riman R.E. In: Binner J.G.P. (Ed). Advanced Ceramic Processing and Technology (1990), Willian Andrew Publishing, Noyes 39-71
4. Santos C., Ribeiro S., Strecker K., and Da Silva L.E.G. Acta Microsc. 2 (2003) 83-86
5. Bowen L.J., Weston R.J., Carruthers T.G., and Brook R.J. J. Mater. Sci. 13 (1978) 341-350
6. Messier D.R., Riley F.L., and Brook R.J. J. Mater. Sci. 13 (1978) 1199-1205
7. Sajgalik P., Rajan K., Warbichler P., Hoffer F., and Dusza J. Key Eng. Mater. 159-160 (1999) 405-410
8. Emoto H., Hirotsuru H., and Mitomo M. Key Eng. Mater. 159-160 (1999) 215-220
9. Jack H.K. J. Mater. Sci. 11 (1973) 1135-1158
10. Hirosaki N., Okada A., and Mitomo M. J. Mater. Sci. 25 (1990) 1872-1876
11. Hampshire S., Leigh M., Morrissey V.J., Pomeroy M.J., and Saruhan B. 3rd International Symposium Ceramic Materials & Components for Engines. Las Vegas, USA (November 27-30, 1998)
12. Takatori K., Kobayashi S., Wada S., and Kamigaito O. In: Vincenzini P. (Ed). High Tech Ceramics (1987), Elsevier Science Publishers B.V, The Nettherlands, Amsterdam 925-931
13. Yeheskel O., Gefen Y., and Talianker M. J. Mater. Sci. 19 (1984) 745-752
14. Fujikawa T., Inoue Y., Homma K., Tatsuno T., Okada H., and Kondo N. Kobelco Technol. Rev. 3 (1988) 1-8
15. Hoffmann M.J., and Petzow G. Pure Applied Chem. 66 (1994) 1807-1814
16. Liu M., and Nemat-Nasser S. J. Mater. Res. 14 (1999) 4621-4629
17. Meléndez-Martínez J.J., and Domínguez-Rodríguez A. Prog. Mater. Sci. 49 (2004) 19-107
18. Szépvölgyi J., Mohai I., and Gubicza J. J. Mater. Chem. 11 (2001) 859-863
19. Kawaoka H., Kusunose T., Choa Y.H., Sekino T., and Niihara K. J. Ceram. Process. Res. 2 (2001) 51-53
20. Ziegler G., Heinrich J., and Wötting G. J. Mater. Sci. 22 (1987) 3041-3086
21. Negita K. J. Mater. Sci. Lett. 4 (1985) 755-758
22. Hirosaki N., Okada A., and Matoba K. J. Am. Ceram. Soc. 71 (1988) C-144-C-147
23. Miyazaki S., Tsuji I., Mori M., Hara Y., Furuse Y., and Hamada S. Yokohama International Gas Turbine Congress. October 27th to November 1st, Yokohama, Japan (1991) (I-149)
24. I. Tsuji, S. Aoki, S. Miyazaki, Y. Hara, Y. Furuse, S. Hamada, ASME Paper 91-GT-311, 1991.
25. T. Shimizu, K. Takama, H. Enokishima, K. Mikame, S. Tsuji, SAE Technical Papers 900656, 1990.
26. Knoch H., Schwetz K.A., and Lipp A. In: Riley F.L. (Ed). Progress in Nitrogen Ceramics (1983), Martinus Nijhoff Publishers, Boston/The Hague/Dordrecht/Lancaster 381-391
27. J. Miyauchi, Y. Kobayashi, SAE Technical Papers 850313 (1985).
28. J.T. Neil, K.W. French, C.L. Quackenbush, J.T. Smith, ASME Paper 82-GT-252, 1982.
29. Hampshire S., Pomeroy M.J., and Saruham B. In: Vincenzini P. (Ed). High Tech Ceramics (1987), Elsevier Science Publishers B.V, Amsterdam, The Nettherlands 941-951
30. Sato T., Takeishi K., Matsuura M., and Miyauchi J. Proceedings of 1983 Tokyo International Gas Turbine Conress. 83-TOKYO-IGTC-8 (1983) 59
31. Izhevskiy V.A., Genova L.A., and Bressiani J.C. Ceramica 45 (1999) 5-23
32. Richerson D.W. Am. Ceram. Soc. Bull. 52 (1973) 560-569
33. Kossowsky R., Miller M.G., and Diaz E.S. J. Mater. Sci. 10 (1975) 983-997
34. Rouxel T., Besson J.L., Gault C., Goursat P., Leigh M., and Hampshire S. J. Mater. Sci. Lett. 8 (1989) 1158-1160
35. B. Matovic, PhD. Thesis, Max-Planck-Institut für Metallforschung, Universität Stuttgart, Bericht Nr. 137, August 2003.
36. Riley F.L. J. Am. Ceram. Soc. 83 (2000) 245-265
37. Heuer A.H., and Lou V.L. J. Am. Ceram. Soc. 73 (1990) 2789-2803
38. H. Peng, Doctoral Dissertation, Department of Inorganic Chemistry, Stockholm University, 2004.
39. Bandyopadhyay G., and French K.W. J. Eng. Gas Turb. Power 108 (1986) 536-539
40. J. Neil, G. Bandyopadhyay, D. Sordelet, M. Mahoney, Gas Turbine and Aeroengine Congress and Exposition, Bruseis, Belgium, June 11-14, 1990.
41. Quackembush C.L., French K.W., and Neil J.T. Automotive Technology Development Contractors Coordination Meeting (October 26-29, 1981)
42. G. He, D.A. Hirschfeld, J. Cesarano, III, SAND2000-0284C, February 2000.
43. Cesarano III J., Sagalman R., and Calvert P. Ceram. Ind. 148 (1998) 94-102
44. Torizuka S., Yabuta K., and Nishio H. ISIJ Int. 29 9 (1989) 734-739
45. Lange F.F. J. Am. Ceram. Soc. 72 (1989) 3-5
46. Bowen H.K. Mater. Sci. Eng. 44 (1980) 1-56
47. Rhodes W.D. J. Am. Ceram. Soc. 64 (1981) 19-22
48. Barringer E.A., and Bowen H.K. J. Am. Ceram. Soc. 65 (1982) C-199-C-201
49. Lange F.F. J. Am. Ceram. Soc. 67 (1984) 83-89
50. Askay I.A. In: Messing G.L., Fuller Jr. E.R., and Hausner H. (Eds). Ceramic Transactions Vol. 1, Ceramic Powder Science II (1988), American Ceramic Society, Westerville Ohio 663-674
51. Haggerty J.S., Garvey G.J., Flint J.H., Sheldon B.W., Okuyama M., Ritter J.E., et al. In: Messing G.L., Fuller Jr. E.R., and Hausner H. (Eds). Ceramic Transactions Vol. 1, Ceramic Powder Science II (1988), American Ceramic Society, Westerville Ohio 1059-1068
52. Pasto A.E. J. Am. Ceram. Soc. 67 (1984) C-178-C-180
53. Yeckley R.M. Talk 83-C-88F presented at 12th Annual Conference on Composites and Advanced Ceramics. Cocoa Beach, FL, USA (1988)
54. Segal D.L. Chem. Ind. 19 (1985) 544-545
55. Yamada T., Kawahito T., and Iwai T. Proceedings of International Symposium of Ceramic Components for Engine. Japan (1983) 333-342
56. Gubizca J., Szépvölgyi J., Mohai I., Zsoldos L., and Ungar T. Mater. Sci. Eng. A280 (2000) 263-269
57. Moulson A.J. J. Mater. Sci. 14 (1979) 1017-1051
58. Szépvölgyi J., Riley F.L., Mohai I., Bertóti I., and Gilbart E. J. Mater. Chem. 6 (1996) 1175-1186
59. LiLi Y., Liang Y., Zheng F., Ma X.F., and Cui S.J. J. Mater. Res. 15 (2000) 988-994
60. Shimada M. Am. Ceram. Soc. Bull. 65 (1986) 1153-1155
61. Koc R., and Kaza S. J. Eur. Ceram. Soc. 18 (1998) 1471-1477
62. Sahu S., Kavecky S., and Szepvolgyi J. J. Eur. Ceram. Soc. 15 (1995) 1071-1077
63. Eaborn C.A. Organosilicon Compounds (1960), Butterworths Scientific Publications, London
64. Goodwin C.A. Ceram. Eng. Sci. Proc. 3 (1982) 109-119
65. Mazdiyasni K.S., West R., and David L.D. J. Am. Ceram. Soc. 61 (1978) 504-508
66. Wong L., and Aldinger F. Adv. Eng. Mater. 2 (2000) 110-113
67. Rahaman M.N. Ceramic Processing and Sintering vol. 6 (1995), Marcel Dekker, New York pp. 309
68. Schwartzwalder K. Am. Ceram. Soc. Bull. 28 (1949) 459-461
69. Mutsuddy B.C., and Ford R.G. Ceramic Injection Molding (1995), Chapman and Hall, London
70. Bandyopadhyay G., and Neil J.T. In: Viechnicki D.J. (Ed). 37th Sagamore Army Materials Research Conference (1991), Department of Army 232-245
71. Ohnsorg R., Teneyck M., and Sweeting T. ASME, International Gas Turbine Conference and Exhibit. 31st, Duesseldorf, West Germany (1986) 1986
72. M. Kaneno, I. Oda, SAE Paper No. 840013, 1984.
73. S.G. Timoney, Diesel Engine. EEC Brussels: EUR 7660 EN, 1981.
74. Woods M.E., Mandler W.F., and Scofield T.L. Am. Ceram. Soc. Bull. 64 (1985) 287-293
75. Richerson D.W. Am. Ceram. Soc. Bull. 64 (1985) 282-286
76. Helms H.E., Johnson R.A., and Groseclose L.E. Proceedings of the twenty-third Automotive Technology Development Contractors (1986), Society of Automotive Engineers, Warrendale, PA, USA 137-155
77. Bowen H.K. In: Crawford J.H., Chen Y., and Sibley W.A. (Eds). Deffect Properties and Processing of High Technology Non-metallic Materials (1984), M.R.S. Symp. Proc. 24, North Holland, N.Y.
78. Johnson D.W. Am. Ceram. Soc. Bull. 60 (1981) 221-224
79. K.W. French, J.T. Neil, L.T. Turnbaugh, U.S. Patent No. 4,456,713, 1984.
80. Bandyopadhyay G., and French K.W. Proceedings of Workshop on Conservation and Substitution Technology for Critical Metals in Bearings and Related Components for Improved Bearing Performance. Vanderbilt University, Nashville, TN (March 12-14, 1984)
81. Schnittgrung G.D. SAMPE Q (1981) 8-13
82. Wada S., and Oyama Y. Proceedings of the Second International Symposium on Ceramic Materials and Components for Engines. Lubeck-Travemunde (April 14-17, 1986)
83. Honma T., Masaki H., and Wada S. In: Tennery V.J. (Ed). Third International Symposium on Ceramic Materials and Components for Engines. Las Vegas, NV (November 27-30, 1988) 42-53
84. Y. Katano, M. Ando, T. Itoh, M. Sasaki, ASME Paper 91-GT-264, 1991.
85. C.L. Quackenbush, J.T. Smith, ASME 84-GT-228, 1984.
86. Y. Kobayashi, E. Matsuo, T. Inagaki, T. Ozawa, SAE Paper 910401, 1991.
87. K. Katayama, T. Watanabe, K. Matoba, N. Katoh, SAE Paper 861128, 1986.
88. http://jazz.nist.gov, Accessed 03 March 2006.
89. Young A.C., Omatete O.O., Janney M.A., and Menchhofer P.A. J. Am. Ceram. Soc. 74 (1991) 612-618
90. Janney M.A., Omatete O.O., Walls C.A., Ogle R.G., Nunn S.D., and Westmoreland G. J. Am. Ceram. Soc. 81 (1998) 581-591
91. Montgomery J.K., and Faber K.T. Scripta Mater. 42 (2000) 283-287
92. Wasche R., and Steinborn G. Key Eng. Mater. 132-136 (1997) 374-377
93. Stampfl J., H-Ch Liu S., Woo Nam K., Sakamoto H., Tsuru S., Kang, et al. Mater. Sci. Eng. A334 (2002) 187-192
94. M.A. Janney, O.O. Omatete, U.S. Patent No. 5 028 362, July 2, 1991.
95. Omatete O.O., Janney M.A., and Strehlow R.A. Am. Ceram. Soc. Bull. 70 (1991) 1641-1649
96. M.A. Janney, O.O. Omatete, U. S. Patent No. 5 145 908, September 8, 1992.
97. S.D. Nunn, J.O. Kiggans Jr., R.E. Simpson II, J.P. Maria, SRBSN. CONF-950401-32, 1995.
98. O.O. Omatete, CONF-950129, 1995.
99. Rak Z.S. Polish Ceramics 2000 Conference, ECN-RX-00-003. Spala (May 29-31, 2000)
100. Sawitz M. Am. Ceram. Soc. Bull. 78 (1999) 53-56
101. Janney M.A., Nunn S.D., Walls C.A., Omatete O.O., Ogle R.D., Kirby G.H., et al. In: Mohamed N., and Rahaman (Eds). The Handbook of Ceramic Engineering (1998), Marcel Dekker
102. Stampfl J., Liu H.-C., Nam S.W., Kang S., and Prinz F.B. In: Michel B., Winkler T., Werner M., and Fecht H. (Eds). Third International Conference on Micro Materials, MicroMat 2000. Berlin, Verlag ddp goldenbogen, Dresden (2000) 1073-1078
103. O.O. Omatete, M.A. Janney, S.D. Nunn, DE 95014267, CONF-9504181-1, 1995.
104. O.O. Omatete, M.A. Janney, DE96005967, CONF-9511175-1, 1995.
105. Pollinger J. Symposium on Non Destructive Evaluation of Ceramics, 99th Annual Meeting. NDE of Ceramics 97 (May 4-7, 1997), American Ceramic Society, Cincinnati, Ohio
106. Nunn S.D., and Kirby G.H. Ceram. Eng. Sci. Proc. 17 (1996) 209-213
107. Rundgren K., and Lyckfeldt O. 27th International Conference on Composites and Advanced Ceramic. Cocoa Beach, FL (2003)
108. Lin H.-T., Waters S.B., and More K.L. Proceedings 25th International Conference on Advanced Ceramics. Cocoa Beach, FL (2001) 175-182
109. Honeywell, Ceramic Components, Product Literature, Torrance, CA, January 2001.
110. Brentnall W.D., van Roode M., Norton P.F., Gates S., Price J.R., Jimenez O., et al. In: van Roode M., Ferber M.K., and Richerson D.W. (Eds). Ceramic Gas Turbine Design and Test Experience (2002), ASME Press, New York, NY 155-192
111. Sheppard L.M. Am. Ceram. Soc. Bull. 70 (1991) 692-701
112. Quadir T., Rice R.W., Chakraverty J.C., Breindel J.A., and Wu C.C. Ceram. Eng. Sci. Proc. 12 (1991) 1952-1957
113. Riley F.L. In: Riley F.L. (Ed). Nitrogen Ceramics (1977), Noordhoff, The Netherlands 265-288
114. Kiggans J.O., Hubbard C.R., Steele R.R., Kimrey H.D., Holcombe C.E., and Tiegs T.N. Ceramic Transactions. Microwaves, Theory and Applications in Materials Processing (1988), American Ceramic Society, Westerville, Ohio 403-410
115. Kiggans J.O., and Tiegs T.N. Characterization of Sintered Reaction Bonded Silicon Nitride Processed by Microwave Heating. Microwave Processing of Materials-III 269 (1992), Materials Research Society, Pittsburgh, PA pp. 285-290
116. Jones B.F., and Lindley M.W. J. Mater. Sci. 10 (1975) 967-972
117. Liu H.-C., Kang S., Prinz F.B., and Stampfl J. In: Liu H.-T., and Singh M. (Eds). Ceramic Engineering and Science Proceedings, "26th Annual Conference on Composites, Advanced Ceramics, Materials and Structures: B", vol. 23 (2002) 43-50
118. A.G. Cooper, PhD. Thesis, Stanford University, 1999.
119. Kang S., Stampfl J., Cooperand A.G., and Prinz F.B. In: Heinrich J.G., and Aldinger F. (Eds). Ceramic Materials and Components for Engines (2000) 359-364
120. G. He, D.A. Hirschfeld, J. Cesarano III, SAND2000-0284C, February 2000.
121. Tuttle B.A., Smay J.E., Cesarano III J., Voigt J.A., Scofield T.W., Olson W.R., et al. J. Am. Ceram. Soc. 84 (2001) 872-874
122. J. Cesarano III, P. Calvert, U.S. Patent No. 6 027 326, February 22, 2000.
123. Albano M.P., and Garrido L.B. J. Am. Ceram. Soc. 81 (1998) 837-844
124. Liu D., and Malghan S.G. Colloids Surf. A110 (1996) 37-45
125. W.T. Collins, L.C. Sales, V.K. Pujari, U.S. Patent No. 5,696,041, December 9, 1997.
126. Kietzman J.W., and Prinz P.F. Proceedings of the Solid Freeform Fabrication Symposium. The University of Texas at Austin, Austin, TX (August 10-12, 1998) 567-574
127. J.W. Kietzman, PhD. Thesis, Stanford University, Stanford, CA, 1999.
128. Kang S., Johnston J.P., Arima T., Matsunaga M., Tsuru H., and Prinz F.P. Proceedings of ASME Turbo Expo 2003 Power for Land, Sea, and Air. Atlanta, Georgia, USA, GT2003-38933 (June16-19, 2003)
129. Harlan N., Park S.-M., Bourell D.L., and Beaman J.J. In: Bourell D.L. (Ed). Solid Freeform Fabrication Symposium (1999), University of Texas, Austin, Texas 297-302
130. Sachs E., Allen S., Hadjiloucas C., Yoo J., and Cima M. In: Bourell D.L. (Ed). Solid Freeform Fabrication Symposium (1999), University of Texas, Austin, Texas, 411-426
131. Jacobs P.F. Rapid Prototyping & Manufacturing: Fundamentals of Stereolithography. 1st ed. (1992), Society of Manufacturing Engineers, Deaborn, MI
132. Zimbeck W., Pope M., and Rice R.W. Proceedings of the Solid Freeform Fabrication Symposium. The University of Texas at Austin, Austin, TX (August 11-13, 1996) 411-418
133. Stratasys Inc. Proceedings of the Solid Freeform Fabrication Symposium. The University of Texas at Austin, Austin, TX (August 12-14, 1991) 115-122
134. Lombardi J.L., Artz G.J., Popovich D., Vaidyanathan R., and Boggavarapu S. Proceedings of the Solid Freeform Fabrication Symposium. The University of Texas at Austin, Austin, TX (August 10-12, 1998) 511-517
135. Agarwala M.K., Bandyopadhyay A., van Weeren R., Langrana N.A., Safari A., Danforth S.C., et al. Proceedings of the Solid Freeform Fabrication Symposium. The University of Texas at Austin, Austin, TX (August 12-14, 1996) 335-343
136. Sachs E., Cima M.J., Bredtand J., and Curodeau A. Man. Rev. 5 (1992) 117-126
137. Cima M.J., Yoo J., Khanuja S., Rynerson M., Nammour D., and Giritlioglu B. Solid Freeform Fabrication Symposium Proceedings. The University of Texas at Austin, Austin, TX (August 7-9, 1995) 479-488
138. Lenk R. Adv. Eng. Mater. 1-2 (2000) 40-47
139. Loschau H. Proceedings of the 9th CIMTEC-World Ceramic Congress and Forum on New Materials. Florence, Italy, June 14-19, Part B (1998) 567-573
140. Knitter R., Bauer W., Gohring D., and Hauβelt J. Adv. Eng. Mater. 3 (2001) 49-54
141. Kingery W.D. Solid State Phenom. 25-26 (1992) 1-10
142. Sajgalik P., and Haviar M. Ceram. Int. 18 (1992) 279-283
143. Falk L.K.L. J. Mater. Sci. 39 (2004) 6655-6673
144. Tsuge A., Kudo H., and Komeya K. J. Am. Ceram. Soc. 57 (1974) 269-270
145. Lange F.F. Int. Met. Rev. 1 (1980) 1-20
146. Sharma V., Nemat-Nasser S., and Vecchio K. J. Am. Ceram. Soc. 81 (1998) 129-139
147. Sharma V., Nemat-Nasser S., and Vecchio K. Exp. Mech. 21 (1994) 315-323
148. Tanaka H. In: Somiya S., and Inomata Y. (Eds). Silicon Carbide Ceramics 1. Fundamental and solid reaction (1991), Elsevier Applied Science, London 213-238
149. Hampshire S., and Jack K.H. In: Taylor D., and Popper P. (Eds). Special Ceramics 7 (1981), Stoke-on-Trent: British Ceramic Research Asssociation 37-49
150. Falk L.K.L. J. Eur. Ceram. Soc. 17 (1997) 983-994
151. Gazza G.E. J. Am. Ceram. Soc. 56 (1973) 662-665
152. Clarke D.R., Zaluzec N.J., and Carpenter R.W. J. Am. Ceram. Soc. 64 (1991) 608-611
153. Bonnel D.A., Tien Y.T., and Ruhle M. J. Am. Ceram. Soc. 70 (1987) 460-465
154. Park H., Kim H-He, and Niihara K. J. Am. Ceram. Soc. 80 (1997) 750-756
155. Tsuge A., Nistrida K., and Komatsu M. J. Am. Ceram. Soc. 58 (1975) 323-326
156. Lange F.F. Ceram. Soc. Bull. 62 (1983) 1369-1374
157. Clarke D.R., Lange F.F., and Schnittgrund G.D. J. Am. Ceram. Soc. 62 (1982) C-51-C-52
158. Boberski C., Peuckert M., and Selgert P. Proceedings of the 1st European Ceramic Society Conference. Maastricht, Holland (1989) 1378-1382
159. Wada S., and Ukyo Y. Proceedings of the Thirthyfourth Japan Congress on Materials Research, Kyoto, Japan. The Society of Material Science, Japan (1991) 29-33
160. Rödel J. J. Eur. Ceram. Soc. 10 (1992) 143-150
161. Faber K.T., and Evans A.G. Acta Metall. 31 (1983) 565-576
162. Yamada T., Shimada M., and Koizumi M. Am. Ceram. Soc. Bull. 60 (1981) 1281-1283
163. Abe O. Ceram. Int. 16 (1990) 53-60
164. Fabrichnaya O., Seifert H.J., Weiland R., Ludwing T., Aldinger F., and Navrotsky A. Z. Metallkd. 92 (2001) 1083-1097
165. Datta P.K., Strafford K.N., Gray J.S., Gill C., and Fordham R.J. Corros. Sci. 29 (1989) 767-774
166. Hampshire S., Drew R.A.L., and Jack K.H. Phys. Chem. Glasses 26 (1985) 182-186
167. Greskovich C., Pasco W.D., and Quinn G.D. Am. Ceram. Soc. Bull. 63 (1984) 1165-1170
168. V. Tikare, W.A. Sanders, S.R. Choi, NASA Contractor Report 191190, 1993.
169. Jihong S., and Dongliang J. J. Eur. Ceram. Soc. 7 (1991) 243-247
170. A.A. Wereszczak, T.P. Kirkland, M.K. Ferber, DE95009172 CONF-950129-3, 1995.
171. Rice R.W. Ceram. Eng. Sci. Proc. 2 (1981) 661-701
172. Mitomo M., Kuramoto N., and Inomata Y. J. Mater. Sci. 14 (1979) 2309-2316
173. Shibata N., Pennycook S.J., Gosnell T.R., Painter G.S., Shelton W.A., and Becher P.F. Nature 428 (2004) 730-732
174. M.J. Hoffmann, H. Gu, R.M. Cannon, In: Carter CB, Hall EL, Briant CL, Nutt S, editors. Interfacial Engineering for Optimized Properties II, Warrendale, Pennsylvania: MRS Proceedings 586, Mater Res Soc; 2000, pp. 65-74.
175. Luo X., Chen L., Huang Q., and Zhang L. J. Univ. Sci. Technol. (Beijing) 11 (2004) 329-333
176. Winn A.J., Dowson D., and Bell J.C. Tribol. Int. 28 (1995) 383-393
177. Dowson D., Winn A.J., and Bell J.C. Tribol. Int. 28 (1995) 395-402
178. Melandri C., Gee M.G., de Portu G., and Guicciardy S. Tribol. Int. 28 (1995) 403-413
179. Liu W., Duda J.L., and Klaus E.E. Wear 199 (1996) 217-221
180. Hampshire S. Met. Forum 7 (1984) 162-169
181. Oyama Y., and Kamigaito O. Jpn. J. Appl. Phys. 10 (1971) 1637-1642
182. Jack K.H., and Wilson W.I. Nature Phys. Sci. 238 (1972) 28-29
183. Patel J.K., and Thompson D.P. Br. Ceram. Trans. J. 87 (1988) 70-73
184. T. McArdle, B. Eng. Dissertation, NIHE Limerick (University of Limerick, Ireland), 1985.
185. In: Reser M.K. (Ed). Phase Diagrams for Ceramists vol. I-III (1969), American. Ceramic Society, Columbus, OH
186. Silicon Nitride, Ceradyne's Silicon Nitride for Automative Applications, Ceradyne Inc., Advanced Tehcnical Ceramics, Costa Mesa, CA, 2005.
187. Weston R.J., and Carruthers T.G. Proc. Br. Ceram. Soc. 22 (1973) 197
188. Xue J., Liu Q., and Gui L. J. Am. Ceram. Soc. 90 (2007) 1623-1625
189. Riley F.L. Sci. Ceram. Proc. 12 (1986) p15-26
190. Stalios A.D., Luyten J., Hemsley C.D., Riley F.L., and Fordham J. J. Eur. Ceram. Soc. 7 (1991) 75-81
191. Duan R.G., Roebben G., Vleugles J., and Van Der Biest O. J. Eur. Ceram. Soc. 22 (2002) 1897-1904
192. Amato L., Martorana D., and Silengo B. Mater. Sci. Eng. 28 (1977) 215-220
193. H. Larker, J. Adlerborn, H. Bohman, SAE Paper 770335, March 1977.
194. Kingery W.D. J. Appl. Phys. 30 (1959) 301-306
195. Bowen L.J., Carruthers T.G., and Brook R.J. J. Am. Ceram. Soc. 61 (1978) 335-339
196. Rahaman M.N., Riley F.L., and Brook R.J. J. Mater. Sci. 16 (1981) 660-668
197. Lange F.F. J. Am. Ceram. Soc. 56 (1973) 518-522
198. Jack K.H. In: Carlsson R., and Karlsson S. (Eds). Science of Ceramics 11 (1981), The Swedish Ceramic Society, Klipper 125-141
199. Costa Oliveira F.A., Tambuyser P., and Baxter D.J. Ceram. Int. 26 (2000) 571-578
200. D.C. Larsen, J.W. Adams, IIT Research Institute Materials Technology Division, Report AFWAL-TR-83-4141, 1984.
201. Lange F.F., Singhal S.C., and Kuznicki R.K. J. Am. Ceram. Soc. 60 (1977) 249-252
202. Zheng Y.S., Knowles K.M., Vieira J.M., Lopes A.B., and Oliveira F.J. J. Microsc. 201 (2001) 238-249
203. Knutson-Wedel E.M., Falk L.K.L., Ekström T., and Björklund H. J. Mater. Sci. 26 (1991) 5575-5584
204. Oyama Y. Jpn. J. Appl. Phys. 11 (1972) 760-761
205. Young H.K., Kim H.W., and Kim H.-E. J. Mater. Res. 15 (2000) 364-368
206. Isomura M., and Takahashi T. In: Kimura S., and Niihara K. (Eds). Proceedings of the 1st International Symposium on the Science and Engineering Ceramics. Japan: Ceramic Society of Japan, Koda (1991) 109-113
207. Toropov N.A., and Bondar I.A. Bull. Acad. Sci. USSR Div. Chem. Sci. (1961) 1280-1285
208. Jones M.I., Hyuga H., Irao K., and Yamauchi Y. J. Am. Ceram. Soc. 87 (2004) 714-716
209. Guo S., Hirosaki N., Yamamoto Y., Nishimura T., and Mitomo M. Scr. Mater. 45 (2001) 867-874
210. Guo S., Hirosaki N., Yamamoto Y., Nishimura T., and Mitomo M. J. Am. Ceram. Soc. 85 (2002) 1607-1609
211. Pyzik A.J., Carroll D.F., and Hwang C.J. In: Chen I.-W., et al. (Ed). Silicon Nitride Ceramics-Scientific and Technological Advances, Materials Research Society Symposium Proceedings, vol. 287. Pittsburgh, PA: Materials Research Society (1993) 411-416
212. Shuba R., and Chen I.-W. J. Am. Ceram. Soc. 85 (2002) 1260-1267
213. Wood C.A., Zhao H., and Cheng Y.B. J. Am. Ceram. Soc. 82 (1999) 421-428
214. Hewett C.L., Cheng Y.B., Muddle B.C., and Trigg M.B. J. Am. Ceram. Soc. 81 (1988) 1781-1788
215. Wood C.A., and Cheng Y.B. J. Eur. Ceram. Soc. 20 (2000) 357-366
216. Wang P.L., Zhang C., Sun W.Y., and Yan D.S. J. Eur. Ceram. Soc. 19 (1999) 553-560
217. Zenotchkine M., Shuba R., Kim J.-S., and Chen I.-W. J. Am. Ceram. Soc. 85 (2002) 1254-1259
218. Lee S.B., Hwang M.N., Yoon D.Y., and Herry M.F. Metall. Mater. Trans. A31 (2000) 985-994
219. Park Y.J., Hwang N.M., and Yoon D.Y. Metall. Mater. Trans. 27 (1996) 2809-2819
220. Zenotchkine M., Shuba R., Kim J.-S., and Chen I.-W. J. Am. Ceram. Soc. 84 (2001) 1651-1653
221. Kleebe H.J., and Ziegler G. J. Am. Ceram. Soc. 72 (1989) 2314-2317
222. Dressler W., Kleebe H.J., Hoffmann M.J., Rühle M., and Petzow G. J. Eur. Ceram. Soc. 1 (1996) 3-14
223. Bressiani J.C., Izhevskiy V., and Bressiani A.H.A. Mater. Res. 2 (1999) 165-172
224. Hwang C.H., Tien T.Y., and Chen I.-W. In: Somiya S., Shimada M., Yashimura M., and Watanabe R. (Eds). Sintering 87 (1988), Elsevier, Barking, England 1034-1039
225. Lange F.F. J. Am. Ceram. Soc. 56 (1973) 445-450
226. Mah T.I., Mendiratta M.G., and Lipssit H.A. J. Am. Ceram. Soc. Bull. 60 (1981) 1229-1231
227. Noma T., and Sawaoka A. J. Am. Ceram. Soc. 66 (1985) C-271-C-273
228. Mazdiyasmi K.S., and Ruh R. J. Am. Ceram. Soc. 64 (1981) 415-419
229. Jones M.I., Hyuga H., Irao K., and Yamauchi Y. J. Ceram. Soc. Jpn. 112 (2004) S1024-S1028
230. A.J. Pyzik, D.B. Schwarz, W.J. Dubensky, D.R. Beaman, U.S. Patent No. 4919689, 1990.
231. Kume S., Yoshida H., and Machida M. Int. J. High. Technol. Ceram. 3 (1987) 337-437
232. P. Brännuall, K. Rundgren, Ceramic Development. Programme Research at the Swidish Ceramic Institute, Part I, 1997-1999, p. 13.
233. Wötting G., and Ziegler G. Ceram. Forum Int. 65 (1988) 364-368
234. Ziegler G., and Wötting G. Int. J. High. Technol. Ceram. 1 (1985) 31-58
235. Besenyi E. Int. J. Refract. Met. Hard Mater. 11 (1992) 121-126
236. Hirosaki N., and Okada A. Adv. Ceram. Mater. 3 (1988) 515-516
237. K. Matoba, K. Katayama, M. Kawamura, T. Mizumo, SAE Technical Paper Series 880702, 1988, pp. 37-46.
238. Okada A. J. Eur. Ceram. Soc. 28 (2008) 1097-1104
239. Tanaka I., Pezzotti G., Okamoto T., and Miyama Y. J. Am. Ceram. Soc. 72 (1989) 1656-1660
240. Y. Miyamoto, K. Tanaka, M. Shimada, M. Koizumi, in: W. Bunk, H. Hausner (Eds.), Ceramic Materials and Components for Heat Engines, Deutsche Keramische Gesellschaft, Soarbruchen, 1986, pp. 271-278.
241. Hirosaki N., and Okada A. Nippon Seramikkusu Kyoukai Gakujutu Rombunshi 97 (1989) 673-675
242. Hirosaki N., Okada A., and Akimune Y. J. Mater. Sci. Lett. 9 (1990) 1322-1323
243. Hoffmann M.J. Pure Appl. Chem. 67 (1995) 939-946
244. 4 Ceramics, NATO ASI Series (1994), Kluwer Academic Press
245. Vetrano J.S., Kleebe H.-J., Hampp E., Hoffmann M.J., Ruhle M., and Cannon R.M. J. Mater. Sci. 28 (1993) 3529-3538
246. 4 Ceramics, NATO ASI Series (1994), Kluwer Academic Press
247. Tiegs T.N., Nunn S.D., Breavers T.M., Menchhofer P.A., Barker D.L., and Coffey D.W. Ceram. Eng. Sci. Proc. 16 (1995) 467-473
248. Hampshire S., Park H.K., Thompson D.P., and Jack K.H. Nature 274 (1978) 880-882
249. Hirosaki N., and Okada A. J. Ceram. Soc. Jpn. Int. Ed. 95 (1987) 200-204
250. Mitomo M., Tsutsumi M., Bennai E., and Tanaka T. Am. Ceram. Soc. Bull. 55 (1976) 313
251. Gazzar G.E., Katz R.N., and Priest H.F. J. Am. Ceram. Soc. 64 (1981) C-161-C-162
252. Kofune S., Manabe C., Fujikawa T., Kanda T., Yamamoto F., and Okada H. 3th International Conference on Hot Isostatic Pressing. London (November 10-12, 1986)
253. Larker H.T. Mater. Sci. Res. 17 (1984) 571-582
254. http://www.ceram.com, Technical Literature, 2002.
255. Yeheskel O., Gefen Y., and Talianker M. Mater. Sci. Eng. 78 (1986) 209-216
256. Iturriza I., Echeverría J., Gutierrez I., and Castro F. J. Mater. Sci. 25 (1990) 2539-2548
257. Akashi T., and Sawaoka A. J. Mater. Sci. 22 (1987) 1031-1035
258. Terwillinger G.R., and Lange F.F. J. Am. Ceram. Soc. 57 (1974) 25-29
259. Larker H.T. Mater. Sci. Eng. 71 (1985) 329-332
260. Larker H. Ind. Heat. 51 (1984) 39-42
261. Homma K., Tatsuno T., Okada H., Kawai N., and Nishihara M. J. Soc. Mater. Sci. Jpn. 36 (1981) 1005-1011
262. Castro F., and Iturriza I. J. Mater. Sci. Lett. 9 (1990) 600-602
263. Westman A.K., and Larker H.T. J. Eur. Ceram. Soc. 19 (1999) 2739-2746
264. Hoffmann M.J., Geyer A., and Oberaker R. J. Eur. Ceram. Soc. 19 (1999) 2359-2366
265. Echeberria J., Tarazona J., He J.Y., Butler T., and Castro F. J. Eur. Ceram. Soc. 22 (2002) 1801-1809
266. H.T. Larker, J. Adlerborn, H. Bohman, Metal. Powder Report (1977) 395.
267. Yeheskel O., Gefen Y., and Talianker M. High Temperature Materials, Israel-Denmark Binational Conference (April 1986)
268. Heinrich J., and Bohmer M. Ceram. Forum Int. 61 (1984) 399-405
269. Yeh H.C., and Sikora P.F. Am. Ceram. Soc. Bull. 58 (1979) 444-447
270. Yamada T., Shimada M., and Koizumi M. Am. Ceram. Soc. Bull. 60 (1981) 1225-1228
271. Waston G.C., Moore T.J., and Millard M.L. J. Am. Ceram. Soc. 67 (1984) C-208-C-210
272. Wills R.R., Brockway M.C., McCoy L.G., and Niesz D.C. Ceram. Eng. Sci. Proc. 1 (1980) 34
273. W.A. Sanders, D.M. Mieskowski, NASA Technical Memorandum 101443, January 1989.
274. Gianchello A., and Popper P. In: Vincenzini P. (Ed). Energy and Ceramics (1980), Elsevier Scientific Publishing Co., New York, NN 620-631
275. Mangels J.A., and Tennenhouse G.J. Am. Ceram. Soc. Bull. 59 (1980) 1216-1218
276. Mangels J.A. Proceedings of the 5th Annual Conference on Composites and Advanced Materials (1981), American Ceramic Society, Columbus, OH 589-603
277. Mangels J.A., and Tennenhouse G.J. Am. Ceram. Soc. Bull. 60 (1981) 1306-1310
278. Richerson D.W., and Wimmer J.M. J. Am. Ceram. Soc. 66 (1983) C-173-C-176
279. Adlerborn J., Burstrom M., Hermansson L., and Larker H.T. Mater. Des. 8 (1987) 229-232
280. Knutson E.M., Falk L.K.L., and Ekstrom T. In: With G., Terpstra R.A., and Metselaar R. (Eds). Euro-Ceramics, Volume 1: Processing of Ceramics (1989), Elsevier, London 416-420
281. Heinrich J., Backer E., and Bohmer M. J. Am. Ceram. Soc. 71 (1988) C-28-C-31
282. Knutson-Wedel M., Falk L.K.L., and Ekstrom T. J. Hard Mater. 3 (1992) 435-445
283. Pejryd I. Proceedings of the International Conference Lulea. Sweden (June 15-17, 1987) 353-357
284. Govila R.K., Mangels J.A., and Baer J.R. J. Am. Ceram. Soc. 68 (1985) 413-418
285. Butler N.D., Hepworth M.A., Iturriza I., and Castro F. Proceedings of the 1st European Ceramic Society Conference. Maastricht, Holland (June 1989) 1.304-1.308
286. Falk L.K.L., and Rundgren K. J. Am. Ceram. Soc. 75 (1992) 28-35
287. M. Knutson-Wedel, PhD. Thesis, ISBN 91-7197 280-3, Chalmers University of Technology, Goteborg, Sweden, 1996.
288. Lange F.F., Falk L.K.L., and Davies B.I. J. Mater. Res. 2 (1987) 66-76
289. Torizuka S., Yabuta K., and Nishio H. ISIJ Int. 29 (1989) 740-745
290. Iturriza I., Castro F., and Fuentes M. J. Mater. Sci. 24 (1989) 2047-2056
291. Homma K., Tatuno T., Okada H., and Fujikawa T. Proceedings of the Twentyfifth Japan Congress on Materials Research. Japan, Kyoto, Japan (1982), Society of Materials Science 213-217
292. Balazsi Cs., Konya Z., Weber F., Biro L.P., and Arato P. Mater. Sci. Eng. C23 (2002) 1133-1137
293. Balazsi Cs., Weber F., Kover Zs., Shen Z., Konya Z., and Kasztovszky Zs. Curr. Appl. Phys. 6 (2006) 124-130
294. Cadek M., Coleman J.N., Ryan K.P., Nicolosi V., Bister G., Fonseca A., et al. Nano Lett. 4 (2004) 353-356
295. http://www.ceram.com CERAM Research LTD., accessed on July 2007.
296. B. Mikijelj, J. Mangels, E. Belfield, A. MacQueen, SAE International 2004-01-1448, 2004.
297. Sigmund W.M., Bell N.S., and Bergstrom L. J. Am. Ceram. Soc. 83 (2000) 1557-1574