Correlation between the beam profile from a curing light and the microhardness of four resins

Dental Materials

Volumn 30, Issue 12, 2014, Pages 1345-1357

  Price, Richard B T ^a   Labrie, Daniel ^a   Rueggeberg, Frederick A ^b   Sullivan, Braden ^a   Kostylev, Ivan ^a   Fahey, John ^c  

^a DALHOUSIE UNIVERSITY   (Canada)

^b AUGUSTA UNIVERSITY   (United States)

^c Biostatistician   (Canada)

Author keywords

Beam uniformity; Computer assisted image processing; Irradiance beam profile; Knoop microhardness; Light curing units; Localized spectral emission; Photoinitiators; Resin photopolymerisation

Indexed keywords

CURING; DENTAL MATERIALS; FIBER OPTIC SENSORS; IMAGE PROCESSING; LASER BEAMS; LIGHT EMITTING DIODES; MICROHARDNESS; NORMAL DISTRIBUTION; PHOTOPOLYMERIZATION; RESINS;

BEAM PROFILES; BEAM UNIFORMITY; COMPUTER-ASSISTED IMAGE PROCESSING; KNOOP MICROHARDNESS; LIGHT-CURING UNITS; PHOTO-POLYMERISATION; PHOTOINITIATORS; SPECTRAL EMISSION;

BANDPASS FILTERS;

(2,4,6-TRIMETHYLBENZOYL) DIPHENYLPHOSPHINE OXIDE; CAMPHOR; CAMPHORQUINONE; DENTAL MATERIAL; FILTEK SUPREME PLUS; PHOSPHINE DERIVATIVE; PHOTOINITIATOR; RESIN; RESIN CEMENT; TETRIC EVOCERAM;

ANALOGS AND DERIVATIVES; CHEMISTRY; CLASSIFICATION; DENTAL CURING LIGHT; HARDNESS; HUMAN; MATERIALS TESTING; POLYMERIZATION; RADIATION DOSE; RADIATION RESPONSE; SURFACE PROPERTY; TIME FACTOR;

CAMPHOR; COMPOSITE RESINS; CURING LIGHTS, DENTAL; DENTAL MATERIALS; HARDNESS; HUMANS; MATERIALS TESTING; PHOSPHINES; PHOTOINITIATORS, DENTAL; POLYMERIZATION; RADIATION DOSAGE; SURFACE PROPERTIES; TIME FACTORS;

EID: 84912097635     PISSN: 01095641     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.dental.2014.10.001     Document Type: Article

References (66)

1. Heintze SD, Rousson V. Clinical effectiveness of direct class II restorations - a meta-analysis. J Adhes Dent 2012;14:407-31.
2. Sunnegardh-Gronberg K, van Dijken JW, Funegard U, Lindberg A, Nilsson M. Selection of dental materials and longevity of replaced restorations in Public Dental Health clinics in northern Sweden. J Dent 2009;37:673-8.
3. Kopperud SE, Tveit AB, Gaarden T, Sandvik L, Espelid I. Longevity of posterior dental restorations and reasons for failure. Eur J Oral Sci 2012;120:539-48.
4. Rho YJ, Namgung C, Jin BH, Lim BS, Cho BH. Longevity of direct restorations in stress-bearing posterior cavities: a retrospective study. Oper Dent 2013;38:572-82.
5. Rasines Alcaraz MG, Veitz-Keenan A, Sahrmann P, Schmidlin PR, Davis D, Iheozor-Ejiofor Z. Direct composite resin fillings versus amalgam fillings for permanent or adult posterior teeth. Cochrane Database Syst Rev 2014;3:CD005620.
6. Opdam NJ, Bronkhorst EM, Roeters JM, Loomans BA. A retrospective clinical study on longevity of posterior composite and amalgam restorations. Dent Mater 2007;23:2-8.
7. Bernardo M, Luis H, Martin MD, Leroux BG, Rue T, Leitao J, et al. Survival and reasons for failure of amalgam versus composite posterior restorations placed in a randomized clinical trial. J Am Dent Assoc 2007;138:775-83.
8. Hammouda IM. Effect of light-curing method on wear and hardness of composite resin. J Mech Behav Biomed Mater 2010;3:216-22.
9. Ferracane JL, Berge HX, Condon JR. In vitro aging of dental composites in water - effect of degree of conversion, filler volume, and filler/matrix coupling. J Biomed Mater Res 1998;42:465-72.
10. Calheiros FC, Daronch M, Rueggeberg FA, Braga RR. Degree of conversion and mechanical properties of a BisGMA:TEGDMA composite as a function of the applied radiant exposure. J Biomed Mater Res B Appl Biomater 2008;84:503-9.
11. Ferracane JL, Mitchem JC, Condon JR, Todd R. Wear and marginal breakdown of composites with various degrees of cure. J Dent Res 1997;76:1508-16.
12. Bhamra GS, Fleming GJ. Influence of halogen irradiance on short- and long-term wear resistance of resin-based composite materials. Dent Mater 2009;25:214-20.
13. Ferreira SQ, Costa TR, Klein-Junior CA, Accorinte M, Meier MM, Loguercio AD, et al. Improvement of exposure times: effects on adhesive properties and resin-dentin bond strengths of etch-and-rinse adhesives. J Adhes Dent 2011;13:235-41.
14. Xu X, Sandras DA, Burgess JO. Shear bond strength with increasing light-guide distance from dentin. J Esthet Restor Dent 2006;18:19-27.
15. Brambilla E, Gagliani M, Ionescu A, Fadini L, Garcia-Godoy F. The influence of light-curing time on the bacterial colonization of resin composite surfaces. Dent Mater 2009;25:1067-72.
16. Janda R, Roulet JF, Latta M, Kaminsky M, Ruttermann S. Effect of exponential polymerization on color stability of resin-based filling materials. Dent Mater 2007;23:696-704.
17. Santini A, Miletic V, Swift MD, Bradley M. Degree of conversion and microhardness of TPO-containing resin-based composites cured by polywave and monowave LED units. J Dent 2012;40:577-84.
18. Nomoto R. Effect of light wavelength on polymerization of light-cured resins. Dent Mater J 1997;16:60-73.
19. Price RB, Felix CA. Effect of delivering light in specific narrow bandwidths from 394 to 515 nm on the micro-hardness of resin composites. Dent Mater 2009;25:899-908.
20. Leprince J, Devaux J, Mullier T, Vreven J, Leloup G. Pulpal-temperature rise and polymerization efficiency of LED curing lights. Oper Dent 2010;35:220-30.
21. Asmussen S, Arenas G, Cook WD, Vallo C. Photoinitiation rate profiles during polymerization of a dimethacrylate-based resin photoinitiated with camphorquinone/amine. Influence of initiator photobleaching rate. Eur Polym J 2009;45:515-22.
22. Chen YC, Ferracane JL, Prahl SA. Quantum yield of conversion of the photoinitiator camphorquinone. Dent Mater 2007;23:655-64.
23. Alvim HH, Alecio AC, Vasconcellos WA, Furlan M, de Oliveira JE, Saad JR. Analysis of camphorquinone in composite resins as a function of shade. Dent Mater 2007;23:1245-9.
24. Price RB, Felix CA, Andreou P. Third-generation vs a second-generation LED curing light: effect on Knoop microhardness. Compend Contin Educ Dent 2006;27:490-6.
25. Palin WM, Senyilmaz DP, Marquis PM, Shortall AC. Cure width potential for MOD resin composite molar restorations. Dent Mater 2008;24:1083-94.
26. Scientific documentation Tetric EvoCeram Bulk Fill. Schaan, Liechtenstein: Ivoclar Vivadent; 2014. p. 42.
27. Burtscher P. Ivocerin in comparison to camphorquinone. Ivoclar Vivadent Report, No. 19; July, 2013. p. 13.
28. Moszner N, Fischer UK, Ganster B, Liska R, Rheinberger V. Benzoyl germanium derivatives as novel visible light photoinitiators for dental materials. Dent Mater 2008;24:901-7.
29. Rueggeberg FA. State-of-the-art: dental photocuring - a review. Dent Mater 2011;27:39-52.
30. Randolph LD, Palin WM, Bebelman S, Devaux J, Gallez B, Leloup G, et al. Ultra-fast light-curing resin composite with increased conversion and reduced monomer elution. Dent Mater 2014;30:594-604.
31. Jandt KD, Mills RW. A brief history of LED photopolymerization. Dent Mater 2013;29:605-17.
32. Price RB, Fahey J, Felix CM. Knoop microhardness mapping used to compare the efficacy of LED, QTH and PAC curing lights. Oper Dent 2010;35:58-68.
33. Schneider LF, Cavalcante LM, Prahl SA, Pfeifer CS, Ferracane JL. Curing efficiency of dental resin composites formulated with camphorquinone or trimethylbenzoyl-diphenyl-phosphine oxide. Dent Mater 2012;28:392-7.
34. Arikawa H, Fujii K, Kanie T, Inoue K. Light transmittance characteristics of light-cured composite resins. Dent Mater 1998;14:405-11.
35. Bohren CF, Huffman DR. Absorption and scattering of light by small particles. New York: Wiley; 1983.
36. dos Santos GB, Alto RV, Filho HR, da Silva EM, Fellows CE. Light transmission on dental resin composites. Dent Mater 2008;24:571-6.
37. Masotti AS, Onofrio AB, Conceicao EN, Spohr AM. UV-vis spectrophotometric direct transmittance analysis of composite resins. Dent Mater 2007;23:724-30.
38. Yearn JA. Factors affecting cure of visible light activated composites. Int Dent J 1985;35:218-25.
39. Leprince JG, Palin WM, Hadis MA, Devaux J, Leloup G. Progress in dimethacrylate-based dental composite technology and curing efficiency. Dent Mater 2013;29:139-56.
40. Price RB, Labrie D, Rueggeberg FA, Felix CM. Irradiance differences in the violet (405 nm) and blue (460 nm) spectral ranges among dental light-curing units. J Esthet Restor Dent 2010;22:363-77.
41. Michaud PL, Price RB, Labrie D, Rueggeberg FA, Sullivan B. Localised irradiance distribution found in dental light curing units. J Dent 2014;42:129-39.
42. SmarLite MaX curing card. Form #544161. Milford, DE: DENTSPLY International Inc.; 2010.
43. Bluephase Style curing light. Schaan, Liechtenstein: Ivoclar Vivadent; 2013.
44. ISO 10650-1:2004 dentistry-powered polymerization activators: part 1: quartz tungsten halogen lamps. Geneva, Switzerland: International Standards Organization; 2004. p. 20.
45. ISO 10650-2:2007 dentistry-powered polymerization activators: part 2: light-emitting diode (LED) lamps. Geneva, Switzerland: International Standards Organization; 2007. p. 7.
46. ISO/TS 11405: 2003 dental materials - testing of adhesion to tooth structure. Geneva, Switzerland: International Organization for Standardization; 2003. p. 16.
47. ISO 4049: 2009 dentistry - polymer-based restorative materials. Geneva, Switzerland: International Organization for Standardization; 2009. p. 28.
48. Vandewalle KS, Roberts HW, Andrus JL, Dunn WJ. Effect of light dispersion of LED curing lights on resin composite polymerization. J Esthet Restor Dent 2005;17:244-54.
49. Vandewalle KS, Roberts HW, Rueggeberg FA. Power distribution across the face of different light guides and its effect on composite surface microhardness. J Esthet Restor Dent 2008;20:108-17.
50. Arikawa H, Kanie T, Fujii K, Takahashi H, Ban S. Effect of inhomogeneity of light from light curing units on the surface hardness of composite resin. Dent Mater J 2008;27:21-8.
51. Price RB, Labrie D, Whalen JM, Felix CM. Effect of distance on irradiance and beam homogeneity from 4 light-emitting diode curing units. J Can Dent Assoc 2011;77:b9.
52. Erickson RL, Barkmeier WW. Curing characteristics of a composite. Part 2: the effect of curing configuration on depth and distribution of cure. Dent Mater 2014;30:e134-45.
53. Main C, Cummings A, Moseley H, Stephen KW, Gillespie FC. An assessment of new dental ultraviolet sources and u.v.-polymerized fissure sealants. J Oral Rehabil 1983;10:215-27.
54. Meister J, Franzen R, Apel C, Gutknecht N. Influence of the spatial beam profile on hard tissue ablation, part II: pulse energy and energy density distribution in simple beams. Lasers Med Sci 2004;19:112-8.
55. Price RB, Rueggeberg FA, Labrie D, Felix CM. Irradiance uniformity and distribution from dental light curing units. J Esthet Restor Dent 2010;22:86-101.
56. Leprince JG, Hadis M, Shortall AC, Ferracane JL, Devaux J, Leloup G, et al. Photoinitiator type and applicability of exposure reciprocity law in filled and unfilled photoactive resins. Dent Mater 2011;27:157-64.
57. Li J, Li H, Fok AS, Watts DC. Multiple correlations of material parameters of light-cured dental composites. Dent Mater 2009;25:829-36.
58. Price RB, Whalen JM, Price TB, Felix CM, Fahey J. The effect of specimen temperature on the polymerization of a resin-composite. Dent Mater 2011;27:983-9.
59. Bouschlicher MR, Rueggeberg FA, Wilson BM. Correlation of bottom-to-top surface microhardness and conversion ratios for a variety of resin composite compositions. Oper Dent 2004;29:698-704.
60. Ferracane JL. Correlation between hardness and degree of conversion during the setting reaction of unfilled dental restorative resins. Dent Mater 1985;1:11-4.
61. Flury S, Hayoz S, Peutzfeldt A, Husler J, Lussi A. Depth of cure of resin composites: is the ISO 4049 method suitable for bulk fill materials. Dent Mater 2012;28:521-8.
62. Feitosa VP, Fugolin AP, Correr AB, Correr-Sobrinho L, Consani S, Watson TF, et al. Effects of different photo-polymerization protocols on resin-dentine muTBS, mechanical properties and cross-link density of a nano-filled resin composite. J Dent 2012;40:802-9.
63. Soares CJ, Soares PV, Santos-Filho PC, Armstrong SR. Microtensile specimen attachment and shape - finite element analysis. J Dent Res 2008;87:89-93.
64. Porto IC, Soares LE, Martin AA, Cavalli V, Liporoni PC. Influence of the photoinitiator system and light photoactivation units on the degree of conversion of dental composites. Braz Oral Res 2010;24:475-81.
65. Harrington E, Wilson HJ. Depth of cure of radiation-activated materials - effect of mould material and cavity size. J Dent 1993;21:305-11.
66. Gauthier MA, Stangel I, Ellis TH, Zhu XX. Oxygen inhibition in dental resins. J Dent Res 2005;84:725-9.