메뉴 건너뛰기




Volumn 27, Issue 10, 2011, Pages 983-989

The effect of specimen temperature on the polymerization of a resin-composite

Author keywords

Degree of conversion; Dental composite; Dental materials; Dentistry; Material parameters; Temperature

Indexed keywords

BOTTOM SURFACES; CUBIC SPLINE; DEGREE OF CONVERSION; DENTAL RESINS; EFFECT OF TEMPERATURE; HIGHER TEMPERATURES; HIGHER-DEGREE; IR SPECTRUM; KNOOP MICROHARDNESS; LABORATORY STUDIES; LIGHT CURING; LINEAR CORRELATION; MATERIAL PARAMETERS; MIXED MODELS; RAPID SCAN; RATE OF POLYMERIZATION; SPECIMEN TEMPERATURE;

EID: 80053052118     PISSN: 01095641     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.dental.2011.06.004     Document Type: Article
Times cited : (53)

References (30)
  • 2
    • 38349175690 scopus 로고    scopus 로고
    • Degree of conversion and mechanical properties of a BisGMA:TEGDMA composite as a function of the applied radiant exposure
    • F.C. Calheiros, M. Daronch, F.A. Rueggeberg, and R.R. Braga Degree of conversion and mechanical properties of a BisGMA:TEGDMA composite as a function of the applied radiant exposure J Biomed Mater Res B: Appl Biomater 84 2008 503 509
    • (2008) J Biomed Mater Res B: Appl Biomater , vol.84 , pp. 503-509
    • Calheiros, F.C.1    Daronch, M.2    Rueggeberg, F.A.3    Braga, R.R.4
  • 3
    • 43449084589 scopus 로고    scopus 로고
    • Influence of photoinitiator type on the rate of polymerization, degree of conversion, hardness and yellowing of dental resin composites
    • L.F. Schneider, C.S. Pfeifer, S. Consani, S.A. Prahl, and J.L. Ferracane Influence of photoinitiator type on the rate of polymerization, degree of conversion, hardness and yellowing of dental resin composites Dent Mater 24 2008 1169 1177
    • (2008) Dent Mater , vol.24 , pp. 1169-1177
    • Schneider, L.F.1    Pfeifer, C.S.2    Consani, S.3    Prahl, S.A.4    Ferracane, J.L.5
  • 4
    • 0022630207 scopus 로고
    • The effect of resin formulation on the degree of conversion and mechanical properties of dental restorative resins
    • DOI 10.1002/jbm.820200111
    • J.L. Ferracane, and E.H. Greener The effect of resin formulation on the degree of conversion and mechanical properties of dental restorative resins J Biomed Mater Res 20 1986 121 131 (Pubitemid 16201903)
    • (1986) Journal of Biomedical Materials Research , vol.20 , Issue.1 , pp. 121-131
    • Ferracane, J.L.1    Greener, E.H.2
  • 5
    • 0022020982 scopus 로고
    • Correlation between hardness and degree of conversion during the setting reaction of unfilled dental restorative resins
    • J.L. Ferracane Correlation between hardness and degree of conversion during the setting reaction of unfilled dental restorative resins Dent Mater 1 1985 11 14
    • (1985) Dent Mater , vol.1 , pp. 11-14
    • Ferracane, J.L.1
  • 6
    • 67349131941 scopus 로고    scopus 로고
    • Multiple correlations of material parameters of light-cured dental composites
    • J. Li, H. Li, A.S. Fok, and D.C. Watts Multiple correlations of material parameters of light-cured dental composites Dent Mater 25 2009 829 836
    • (2009) Dent Mater , vol.25 , pp. 829-836
    • Li, J.1    Li, H.2    Fok, A.S.3    Watts, D.C.4
  • 7
    • 0024023292 scopus 로고
    • Correlation of parameters used to estimate monomer conversion in a light-cured composite
    • F.A. Rueggeberg, and R.G. Craig Correlation of parameters used to estimate monomer conversion in a light-cured composite J Dent Res 67 1988 932 937
    • (1988) J Dent Res , vol.67 , pp. 932-937
    • Rueggeberg, F.A.1    Craig, R.G.2
  • 9
    • 0007294771 scopus 로고
    • Photopolymerization kinetics of dimethacrylates using the camphorquinone/amine initiator system
    • W.D. Cook Photopolymerization kinetics of dimethacrylates using the camphorquinone/amine initiator system Polymer 33 1992 600 609
    • (1992) Polymer , vol.33 , pp. 600-609
    • Cook, W.D.1
  • 10
    • 0027553817 scopus 로고
    • Photopolymerization kinetics of oligo(ethylene oxide) and oligo(methylene) oxide dimethacrylates
    • W.D. Cook Photopolymerization kinetics of oligo(ethylene oxide) and oligo(methylene) oxide dimethacrylates J Polym Sci A: Polym Chem 31 1993 1053 1067
    • (1993) J Polym Sci A: Polym Chem , vol.31 , pp. 1053-1067
    • Cook, W.D.1
  • 11
    • 0033278062 scopus 로고    scopus 로고
    • The effects of light intensity, temperature, and comonomer composition on the polymerization behavior of dimethacrylate dental resins
    • L.G. Lovell, S.M. Newman, and C.N. Bowman The effects of light intensity, temperature, and comonomer composition on the polymerization behavior of dimethacrylate dental resins J Dent Res 78 1999 1469 1476 (Pubitemid 32507637)
    • (1999) Journal of Dental Research , vol.78 , Issue.8 , pp. 1469-1476
    • Lovell, L.G.1    Newman, S.M.2    Bowman, C.N.3
  • 12
  • 13
    • 3843091549 scopus 로고    scopus 로고
    • Use of near-IR to monitor the influence of external heating on dental composite photopolymerization
    • M. Trujillo, S.M. Newman, and J.W. Stansbury Use of near-IR to monitor the influence of external heating on dental composite photopolymerization Dent Mater 20 2004 766 777
    • (2004) Dent Mater , vol.20 , pp. 766-777
    • Trujillo, M.1    Newman, S.M.2    Stansbury, J.W.3
  • 14
    • 33745713999 scopus 로고    scopus 로고
    • A new kinetic model for the photopolymerization shrinkage-strain of dental composites and resin-monomers
    • M. Atai, and D.C. Watts A new kinetic model for the photopolymerization shrinkage-strain of dental composites and resin-monomers Dent Mater 22 2006 785 791
    • (2006) Dent Mater , vol.22 , pp. 785-791
    • Atai, M.1    Watts, D.C.2
  • 15
    • 33746479206 scopus 로고    scopus 로고
    • The effects of temperature and light intensity on the polymerization shrinkage of light-cured composite filling materials
    • A.A. Elhejazi The effects of temperature and light intensity on the polymerization shrinkage of light-cured composite filling materials J Contemp Dent Pract 7 2006 12 21
    • (2006) J Contemp Dent Pract , vol.7 , pp. 12-21
    • Elhejazi, A.A.1
  • 16
    • 79955640802 scopus 로고    scopus 로고
    • Setting kinetics and shrinkage of self-adhesive resin cements depend on cure-mode and temperature
    • K. Kitzmüller, A. Graf, D. Watts, and A. Schedle Setting kinetics and shrinkage of self-adhesive resin cements depend on cure-mode and temperature Dent Mater 27 2011 544 551
    • (2011) Dent Mater , vol.27 , pp. 544-551
    • Kitzmüller, K.1    Graf, A.2    Watts, D.3    Schedle, A.4
  • 17
    • 0010455466 scopus 로고    scopus 로고
    • International Standard 4049, International Organization for Standardization Geneva, Switzerland
    • International Standard 4049 Dentistry - polymer-based filling, restorative and luting materials 2000 International Organization for Standardization Geneva, Switzerland
    • (2000) Dentistry - Polymer-based Filling, Restorative and Luting Materials
  • 19
    • 77957739344 scopus 로고    scopus 로고
    • In vivo temperature measurement: Tooth preparation and restoration with preheated resin composite
    • F.A. Rueggeberg, M. Daronch, W.D. Browning, and M.F. DEG In vivo temperature measurement: tooth preparation and restoration with preheated resin composite J Esthet Restor Dent 22 2010 314 322
    • (2010) J Esthet Restor Dent , vol.22 , pp. 314-322
    • Rueggeberg, F.A.1    Daronch, M.2    Browning, W.D.3    Deg, M.F.4
  • 21
    • 0020020499 scopus 로고
    • Conversion in different depths of ultraviolet and visible light activated composite materials
    • I.E. Ruyter, and H. Øysæd Conversion in different depths of ultraviolet and visible light activated composite materials Acta Odontol Scand 40 1982 179 192
    • (1982) Acta Odontol Scand , vol.40 , pp. 179-192
    • Ruyter, I.E.1    Øysæd, H.2
  • 22
    • 0021478016 scopus 로고
    • Fourier transform infrared analysis of degree of polymerization in unfilled resins - Methods comparison
    • J.L. Ferracane, and E.H. Greener Fourier transform infrared analysis of degree of polymerization in unfilled resins - methods comparison J Dent Res 63 1984 1093 1095
    • (1984) J Dent Res , vol.63 , pp. 1093-1095
    • Ferracane, J.L.1    Greener, E.H.2
  • 23
    • 0027682676 scopus 로고
    • Depth of cure of radiation-activated materials - Effect of mould material and cavity size
    • E. Harrington, and H.J. Wilson Depth of cure of radiation-activated materials - effect of mould material and cavity size J Dent 21 1993 305 311
    • (1993) J Dent , vol.21 , pp. 305-311
    • Harrington, E.1    Wilson, H.J.2
  • 25
    • 0037089640 scopus 로고    scopus 로고
    • Effect of chemical structure on degree of conversion in light-cured dimethacrylate-based dental resins
    • DOI 10.1016/S0142-9612(01)00308-8, PII S0142961201003088
    • I. Sideridou, V. Tserki, and G. Papanastasiou Effect of chemical structure on degree of conversion in light-cured dimethacrylate-based dental resins Biomaterials 23 2002 1819 1829 (Pubitemid 34218969)
    • (2002) Biomaterials , vol.23 , Issue.8 , pp. 1819-1829
    • Sideridou, I.1    Tserki, V.2    Papanastasiou, G.3
  • 26
    • 12344306146 scopus 로고    scopus 로고
    • Reaction kinetics and mechanics in photo-polymerised networks
    • DOI 10.1016/j.dental.2004.10.003, PII S0109564104001708
    • D.C. Watts Reaction kinetics and mechanics in photo-polymerised networks Dent Mater 21 2005 27 35 (Pubitemid 40135728)
    • (2005) Dental Materials , vol.21 , Issue.1 , pp. 27-35
    • Watts, D.C.1
  • 27
    • 34547741690 scopus 로고    scopus 로고
    • Exposure reciprocity law in photopolymerization of multi-functional acrylates and methacrylates
    • DOI 10.1002/macp.200600480
    • L. Feng, and B.I. Suh Exposure reciprocity law in photopolymerization of multi-functional acrylates and methacrylates Macromol Chem Phys 208 2007 295 306 (Pubitemid 47233667)
    • (2007) Macromolecular Chemistry and Physics , vol.208 , Issue.3 , pp. 295-306
    • Feng, L.1    Suh, B.I.2
  • 29
    • 0021636684 scopus 로고
    • Comparison of surface layer properties of composite resins by ESCA, SEM and X-ray diffractometry
    • DOI 10.1016/0142-9612(84)90074-7
    • M. Okazaki, and W.H. Douglas Comparison of surface layer properties of composite resins by ESCA, SEM and X-ray diffractometry Biomaterials 5 1984 284 288 (Pubitemid 14007187)
    • (1984) Biomaterials , vol.5 , Issue.5 , pp. 284-288
    • Okazaki, M.1    Douglas, W.H.2
  • 30
    • 0141993620 scopus 로고    scopus 로고
    • Effect of surface finishing and storage media on bi-axial flexure strength and microhardness of resin-based composite
    • V.V. Gordan, S.B. Patel, A.A. Barrett, and C. Shen Effect of surface finishing and storage media on bi-axial flexure strength and microhardness of resin-based composite Oper Dent 28 2003 560 567 (Pubitemid 37229787)
    • (2003) Operative Dentistry , vol.28 , Issue.5 , pp. 560-567
    • Gordan, V.V.1    Patel, S.B.2    Barrett, A.A.3    Shen, C.4


* 이 정보는 Elsevier사의 SCOPUS DB에서 KISTI가 분석하여 추출한 것입니다.