Multiple correlations of material parameters of light-cured dental composites

Dental Materials

Volumn 25, Issue 7, 2009, Pages 829-836

  Li, Jianying ^a   Li, Haiyan ^a   Fok, Alex S L ^a   Watts, David C ^b  

^a UNIVERSITY OF MINNESOTA   (United States)

^b UNIVERSITY OF MANCHESTER   (United Kingdom)

Author keywords

Correlation; Degree of conversion; Dental composite; Material parameters

Indexed keywords

COMPOSITE SAMPLES; CORRELATION; CURING DEPTH; DEGREE OF CONVERSION; DIGITAL IMAGE CORRELATION METHODS; KNOOP HARDNESS; KNOOP MICROHARDNESS; LINEAR CORRELATION; MATERIAL PARAMETER; MATERIAL PARAMETERS; MATERIAL PROPERTY; MECHANICAL PARAMETERS; MULTIPLE CORRELATION; POLYMERIZATION PROCESS; POLYMERIZATION SHRINKAGE; POWER FUNCTIONS; SILICA GLASS; TEMPORAL VARIATION; VOLUMETRIC SHRINKAGE; YOUNG'S MODULUS;

CURING; ELASTIC MODULI; ELASTICITY; MICROHARDNESS; POLYMERIZATION; POLYMERS; RESINS; SHRINKAGE; SILICA; VISCOSITY;

DENTAL COMPOSITES;

ALUMINUM SILICATE; BARIUM BOROSILICATE; BARIUM DERIVATIVE; BARIUM GLASS FILLER; BIOMEDICAL AND DENTAL MATERIALS; BISPHENOL A BIS(2 HYDROXYPROPYL) ETHER DIMETHACRYLATE; CAMPHOROQUINONE; GLASS; MACROGOL DERIVATIVE; METHACRYLIC ACID DERIVATIVE; METHACRYLOXYPROPYLTRIMETHOXYSILANE; POLYESTER; POLYMER; POLYMETHACRYLIC ACID DERIVATIVE; POLYURETHAN; PREMISE COMPOSITE RESIN; RESIN; RZE045 RESIN; SILANE DERIVATIVE; SILASTIC; SILICATE; SILICON DIOXIDE; TERPENE; TRIETHYLENE GLYCOL DIMETHACRYLATE; URETHANE DIMETHACRYLATE LUTING RESIN;

ARTICLE; CHEMISTRY; HARDNESS; HUMAN; IMAGE PROCESSING; LIGHT; MATERIALS TESTING; MECHANICAL STRESS; RADIATION EXPOSURE; SURFACE PROPERTY; TIME; VISCOSITY; YOUNG MODULUS;

ALUMINUM SILICATES; BARIUM COMPOUNDS; BISPHENOL A-GLYCIDYL METHACRYLATE; COMPOSITE RESINS; DENTAL MATERIALS; ELASTIC MODULUS; GLASS; HARDNESS; HUMANS; IMAGE PROCESSING, COMPUTER-ASSISTED; LIGHT; MATERIALS TESTING; METHACRYLATES; POLYESTERS; POLYETHYLENE GLYCOLS; POLYMERS; POLYMETHACRYLIC ACIDS; POLYURETHANES; SILANES; SILICATES; SILICON DIOXIDE; SILICONE ELASTOMERS; STRESS, MECHANICAL; SURFACE PROPERTIES; TERPENES; TIME FACTORS; VISCOSITY;

EID: 67349131941     PISSN: 01095641     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.dental.2009.03.011     Document Type: Article

References (32)

1. Versluis A., Tantbirojn D., Pintado M.R., DeLong R., and Douglas W.H. Residual shrinkage stress distributions in molars after composite restoration. Dental Materials 20 (2004) 554-564
2. El Hejazi A.A., and Watts D.C. Creep and visco-elastic recovery of cured and secondary-cured composites and resin-modified glass-ionomers. Dental Materials 15 (1999) 138-143
3. Silikas N., Eliades G., and Watts D.C. Light intensity effects on resin-composite degree of conversion and shrinkage strain. Dental Materials 16 (2000) 292-296
4. Kleverlaan C.J., and Feilzer A.J. Polymerization shrinkage and contraction stress of dental resin composites. Dental Materials 21 (2005) 1150-1157
5. Park J.W., and Ferracane J.L. Measuring the residual stress in dental composites using a ring slitting method. Dental Materials 21 (2005) 882-889
6. Dauvillier B.S., Hübsch P.F., Aarnts M.P., and Feilzer A.J. Modeling of viscoelastic behavior of dental chemically activated resin composites during curing. Journal of Biomedical Materials Research 58 (2001) 16-26
7. Loshaek S., and Fox T.G. Cross-linked polymers. I. Factors influencing the efficiency of cross-linking in copolymers of methyl methacrylate and glycol dimethacrylates. Journal of the American Chemical Society 75 (1953) 3544-3550
8. Rueggeberg F., and Tamareselvy K. Resin cure determination by polymerization shrinkage. Dental Materials: Official Publication of the Academy of Dental Materials 11 (1995) 265-268
9. Dewaele M., Truffier-Boutry D., Devaux J., and Leloup G. Volume contraction in photocured dental resins: the shrinkage-conversion relationship revisited. Dental Materials 22 (2006) 359-365
10. Chen Y.C., Ferracane J.L., and Prahl S.A. A pilot study of a simple photon migration model for predicting depth of cure in dental composite. Dental Materials 21 (2005) 1075-1086
11. Silva F.F., Mendes L.C., Ferreira M., and Benzi M.R. Degree of conversion versus the depth of polymerization of an organically modified ceramic dental restoration composite by Fourier transform infrared spectroscopy. Journal of Applied Polymer Science 104 (2007) 325-330
12. Versluis A., Tantbirojn D., and Douglas W.H. Distribution of transient properties during polymerization of a light-initiated restorative composite. Dental Materials 20 (2004) 543-553
13. Uhl A., Mills R.W., Vowles R.W., and Jandt K.D. Knoop hardness depth profiles and compressive strength of selected dental composites polymerized with halogen and LED light curing technologies. Journal of Biomedical Materials Research 63 (2002) 729-738
14. Ferracane J.L., Berge H.X., and Condon J.R. In vitro aging of dental composites in water-effect of degree of conversion, filler volume, and filler/matrix coupling. Journal of Biomedical Materials Research 42 (1998) 465-472
15. Ferracane J.L., Mitchem J.C., Condon J.R., and Todd R. Wear and marginal breakdown of composites with various degrees of cure. Journal of Dental Research 76 (1997) 1508-1516
16. McMurray J. Fundamentals of Organic Chemistry (1986) [Brooks/Cole]
17. Satterthwaite J. Shrinkage-stress kinetics of photopolymerised resin-composites. Ph.D. Thesis. School of Dentistry-University of Manchester; 2006.
18. Sun Z., Lyons J.S., and McNeill S.R. Measuring microscopic deformations with digital image correlation. Optics and Lasers in Engineering 27 (1997) 409-428
19. Li J., Fok A.S., Satterthwaite J., and Watts D.C. Measurement of the full-field polymerization shrinkage and depth of cure of dental composites using digital image correlation. Dental Materials 25 (2009) 582-588
20. Genovese A., and Shanks R.A. Time-temperature creep behaviour of poly(propylene) and polar ethylene copolymer blends. Macromolecular Materials and Engineering 292 (2007) 184-196
21. Beatty M.W., Swartz M.L., Moore B.K., Phillips R.W., and Roberts T.A. Effect of crosslinking agent content, monomer functionality, and repeat unit chemistry on properties of unfilled resins. Journal of Biomedical Materials Research 27 (1993) 403-413
22. Obici A.C., Sinhoreti M.A.C., Frollini E., Sobrinho L.C., de Goes M.F., and Henriques G.E.P. Monomer conversion at different dental composite depths using six light-curing methods. Polymer Testing 25 (2006) 282-288
23. Rosen S. Fundamental principles of polymeric materials. 2nd edition (1993), John Wiley & Sons, Inc., New York
24. Marghalani H.Y., and Al-Jabab A.S. Compressive creep and recovery of light-cured packable composite resins. Dental Materials 20 (2004) 600-610
25. Mindel M.J., and Brown N. Creep and recovery of polycarbonate. Journal of Materials Science 8 (1973) 863-870
26. Lai J., and Bakker A. Non-linear creep and recovery behaviour of high-density polyethylene. Scripta Metallurgica et Materialia 28 (1993) 1447-1452
27. Ladouce L., Perez J., Vassoille R., and Vigier G. Non-linear creep behaviour of PET. Journal of Materials Science 29 (1994) 5399-5406
28. Hristova J., and Minster J. Filler fraction effect on creep response of crosslinked polyester matrix with mineral filler. Journal of Applied Polymer Science 89 (2003) 3329-3335
29. Johnson K.L. Correlation of indentation experiments. Journal of the Mechanics and Physics of Solids 18 (1970) 115-126
30. Marshall D.B., Lawn B.R., and Evans A.G. Elastic/plastic indentation damage in ceramics: the lateral crack system. Journal of the American Ceramic Society 65 (1982) 561-566
31. Baltá Calleja F.J., Giri L., Ward I.M., and Cansfield D.L.M. Microstructure of bulk crystallized linear polyethylene: correlation of microhardness and yield stress. Journal of Materials Science 30 (1995) 1139-1143
32. Kim K.H., Ong J.L., and Okuno O. The effect of filler loading and morphology on the mechanical properties of contemporary composites. Journal of Prosthetic Dentistry 87 (2002) 642-649