Influence of halogen irradiance on short- and long-term wear resistance of resin-based composite materials

Dental Materials

Volumn 25, Issue 2, 2009, Pages 214-220

  Bhamra, Gurcharn S ^a   Fleming, Garry J P ^a  

^a TRINITY COLLEGE DUBLIN   (Ireland)

Author keywords

Halogen irradiance; Optical profilometry; Resin based composites; Wear resistance

Indexed keywords

ANALYSIS OF VARIANCE (ANOVA); CARBON FIBER REINFORCED PLASTICS; IMPACT RESISTANCE; PROFILOMETRY; RESINS;

BODY WEARS; HALOGEN IRRADIANCE; IN VITRO; MATERIAL LOSSES; NON CONTACTS; NUMBER OF CYCLES; OPTICAL PROFILOMETER; OPTICAL PROFILOMETRY; PLOUGHING ACTIONS; TOTAL VOLUMETRIC WEARS; WEAR BEHAVIORS; WEAR DEPTHS; WEAR SIMULATIONS; WEAR SIMULATORS;

WEAR RESISTANCE;

2,2 BIS (4 (2 METHACRYLOXYETHOXY)PHENYL)PROPANE; 2,2-BIS-(4-(2-METHACRYLOXYETHOXY)PHENYL)PROPANE; BIOMEDICAL AND DENTAL MATERIALS; BISPHENOL A BIS(2 HYDROXYPROPYL) ETHER DIMETHACRYLATE; FILTEK P60 COMPOSITE RESIN; FILTEK SUPREME; FILTEK Z250; MACROGOL DERIVATIVE; METHACRYLIC ACID DERIVATIVE; POLYMETHACRYLIC ACID DERIVATIVE; POLYURETHAN; RESIN; SILICON DIOXIDE; TRIETHYLENE GLYCOL DIMETHACRYLATE; URETHANE DIMETHACRYLATE LUTING RESIN; Z100 COMPOSITE RESIN; ZIRCONIUM; ZIRCONIUM OXIDE;

ARTICLE; CHEMISTRY; DENTAL CURING LIGHT; DENTAL SURGERY; HUMAN; LIGHT; MATERIALS TESTING; MECHANICAL STRESS; RADIATION EXPOSURE; SURFACE PROPERTY; TIME;

BISPHENOL A-GLYCIDYL METHACRYLATE; COMPOSITE RESINS; CURING LIGHTS, DENTAL; DENTAL MATERIALS; DENTAL RESTORATION WEAR; HUMANS; LIGHT; MATERIALS TESTING; METHACRYLATES; POLYETHYLENE GLYCOLS; POLYMETHACRYLIC ACIDS; POLYURETHANES; SILICON DIOXIDE; STRESS, MECHANICAL; SURFACE PROPERTIES; TIME FACTORS; ZIRCONIUM;

EID: 58149242503     PISSN: 01095641     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.dental.2008.06.007     Document Type: Article

References (38)

1. Bennett A.W., and Watts D.C. Performance of two blue light emitting-diode dental light curing units with distance and irradiation-time. Dent Mater 20 (2004) 72-79
2. Stahl F., Ashworth S.H., Jandt K.D., and Mills R.W. Light-emitting diode (LED) polymerisation of dental composites: flexural properties polymerisation potential. Biomaterials 21 (2000) 1379-1385
3. Mills R.W., Jandt K.D., and Ashworth S.H. Dental composite depth of cure with halogen and blue light emitting diode technology. Br Dent J 8 (1999) 388-391
4. Pollock B.F., and Lewis A.L. Visible light resin-curing generators: a comparison. Gen Dent 29 (1991) 488-493
5. Rueggeberg F.A., Caughman W.F., and Comer R.W. The effect of autoclaving on energy transmission through light-curing tips. J Am Dent Assoc 127 (1996) 1183-1187
6. Barghi N., Berry T., and Hatton C. Evaluating intensity output of curing lights in private dental offices. J Am Dent Assoc 25 (1994) 992-996
7. Martin F.E. A survey of the efficiency of visible light curing units. J Dent 26 (1998) 239-243
8. Pilo R., Oelgiesser D., and Cardash H.S. A survey of output intensity and potential for depth of cure among light-curing units in clinical use. J Dent 27 (1999) 235-241
9. El-Mowafy O., El-Badrawy W., Lewis D.W., Shokati B., Kermallli J., Sloiman O., et al. Intensity of quartz-tungsten-halogen-light-curing units used in private practices in Toronto. J Am Dent Assoc 136 (2005) 766-773
10. Sakaguchi R.L., and Berge H.X. Reduced light energy density decreases post-gel contraction while maintaining degree of conversion in composites. J Dent 26 (1998) 695-700
11. Sarrett D.C. Clinical challenges and the relevance of materials testing for posterior composite restorations. Dent Mater 21 (2005) 9-20
12. DeLong R., and Douglas W.H. Development of an artificial oral environment for the testing of dental restoratives: bi-axial force and movement control. J Dent Res 62 (1983) 32-36
13. De Gee A.J., Pallav P., and Davidson C.L. Effect of abrasion medium on wear of stress-bearing composites and amalgam in vitro. J Dent Res 65 (1986) 654-658
14. Leinfelder K.F., Beaudreau R.W., and Mazer R.B. An in vitro device for predicting clinical wear. Quintessence Int 20 (1989) 755-761
15. Condon J.R., and Ferracane J.L. A new multi-mode oral wear simulator. Dent Mater 12 (1996) 218-226
16. Söderholm K.J., Lambrechts P., Sarrett D., Abe Y., Yang M.C., Labella R., et al. Clinical wear performance of eight experimental dental composites over three years determined by two measuring methods. Eur J Oral Sci 109 (2001) 273-281
17. Heintze S.D. How to qualify and validate wear simulation devices and methods. Dent Mater 22 (2006) 712-734
18. Heinze S.D., Zellweger G., Cavalleri A., and Ferracane J.L. Influence of the antagonist material on the wear of different composites using two different wear simulation methods. Dent Mater 22 (2006) 166-175
19. Ferracane J.L. Is the wear of dental composites still a clinical concern? Is there still a need for in vitro wear simulating devices?. Dent Mater 22 (2006) 689-692
20. DeLong R. Intra-oral restorative materials wear: rethinking the current approaches: how to measure wear. Dent Mater 22 (2006) 702-711
21. St-Georges A.J., Swift E.J., Thompson J.Y., and Heymann H.O. Curing light intensity effects on wear resistance of two resin composites. Oper Dent 27 (2002) 410-417
22. Ramp L.C., Broome J.C., and Ramp M.H. Hardness and wear resistance of two resin composites cured with equivalent radiant exposure from a low irradiance LED and QTH light-curing units. Am J Dent 19 (2006) 31-36
23. Condon J.R., and Ferracane J.L. Evaluation of seven commercial composites using new in vitro wear simulator. J Dent Res 81 (2002) Special Issue A: A337 Abstr. No. 2683
24. Sorensen J.A., and Pham M. In vitro wear of composite resins processed with various systems. J Dent Res 81 (2002) Special Issue A: A324 Abstr No. 2578
25. Cook W.D. Spectral distributions of dental photopolymerization sources. J Dent Res 61 (1982) 1436-1438
26. Pradhan R.D., Melikechi N., and Eichmiller F. The effect of irradiation wavelength bandwidth and spot size on the scraping depth and temperature rise in composite exposed to an argon laser or a conventional quartz-tungsten-halogen source. Dent Mater 18 (2002) 221-226
27. Obici A.C., Sinhoreti M.A.C., Frollini E., Sobrinho L.C., and Consani S. Degree of conversion and knoop hardness of Z250 composite using different photo-activation methods. Polym Test 24 (2005) 814-818
28. Peutzfeltz A., and Asmussen E. Resin composite properties and energy density of light cure. J Dent Res 84 (2005) 659-662
29. Dowling A.H., and Fleming G.J.P. The in-vitro wear resistance of a montmorillonite clay reinforced glass-ionomer restorative. J Dent 34 (2006) 802-810
30. Cvar JF, Ryge G. Criteria for the clinical evaluation of dental restorative materials. United States Public Health Service Publication #790-244. San Francisco: US Government Printing Office; 1971.
31. Leinfelder K.F., Taylor D.F., Barkmeier W.W., and Goldberg A.J. Quantitative wear measurement of posterior composite resins. Dent Mater 2 (1986) 198-201
32. Archard J.F. Contact and rubbing of flat surfaces. J Appl Phys 24 (1953) 981-988
33. Halvorson R.H., Erickson R.L., and Davidson C.L. Energy dependent polymerisation of resin-based composite. Dent Mater 18 (2002) 463-469
34. Palin W.M., Fleming G.J.P., Burke F.J.T., Marquis P.M., Pintado M.R., Randall R.C., et al. The frictional coefficients and associated wear resistance of novel low-shrink resin-based composites. Dent Mater 21 (2005) 1111-1118
35. Hu X., Shortall A.C., and Marquis P.M. Wear of three dental composites under different testing conditions. J Oral Rehabil 29 (2002) 756-764
36. Barkmeier W.W., Latta M.A., Erikson R.L., and Wilwerding T.M. Wear simulation of resin composites and the relationship to clinical wear. Oper Dent 33 (2008) 177-182
37. Shortall A.C., Palin W.M., and Burtscher P. Refractive index mismatch and monomer reactivity influence composite curing depth. J Dent Res 87 (2008) 84-88
38. Mitra S.B., Wu D., and Holmes B.N. An application of nanotechnology in advanced dental materials. J Am Dent Assoc 134 (2003) 1382-1390