Fabric nanocomposite resistance temperature detector

IEEE Sensors Journal

Volumn 15, Issue 1, 2015, Pages 300-306

  Blasdel, Nathaniel J ^a   Wujcik, Evan K ^b   Carletta, Joan E ^a   Lee, Kye Shin ^a   Monty, Chelsea N ^a  

^a University of Akron   (United States)

^b Lamar University   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

BIOMEDICAL EQUIPMENT; FILTRATION; HOSIERY MANUFACTURE; LOADING; MICROFILTRATION; MULTIWALLED CARBON NANOTUBES (MWCN); NANOCOMPOSITES; POLYAMIDES; POLYPYRROLES; RAYON; TEMPERATURE; YARN;

INCREASING TEMPERATURES; MULTIWALLED CARBON NANOTUBE (MWCNTS); RESISTANCE TEMPERATURE; RESISTANCE TEMPERATURE DETECTORS; TEMPERATURE COEFFICIENT OF RESISTANCE; TEMPERATURE DETECTING; TEMPERATURE DETECTION; VAPOR PHASE POLYMERIZATION;

TEMPERATURE MEASURING INSTRUMENTS;

EID: 84910658823     PISSN: 1530437X     EISSN: None     Source Type: Journal    
DOI: 10.1109/JSEN.2014.2341915     Document Type: Article

References (37)

1. L. B. Hunt, "The origin of the platinum resistance thermometer," Platinum Metals Rev., vol. 24, no. 3, pp. 104-112, Jul. 1980.
2. T. D. McGee, Principles and Methods of Temperature Measurement. New York, NY, USA: Wiley, 1988.
3. V. T. Dau, D. V. Dao, T. Yamada, B. T. Tung, K. Hata, and S. Sugiyama, "Integration of SWNT film into MEMS for a micro-thermoelectric device," Smart Mater. Struct., vol. 19, no. 7, p. 075003, Jul. 2010.
4. S. Selvarasah, C.-L. Chen, S.-H. Chao, P. Makaram, A. Busnaina, and M. R. Dokmeci, "A three dimensional thermal sensor based on singlewalled carbon nanotubes," in Proc. Int. Solid-State Sensors, Actuat. Microsyst. Conf., Jun. 2007, pp. 1023-1026.
5. M. De Volder, D. Reynaerts, C. Van Hoof, S. Tawfick, and A. J. Hart, "A temperature sensor from a self-Assembled carbon nanotube microbridge," in Proc. IEEE Sensors, Nov. 2010, pp. 2369-2372.
6. C. K. M. Fung and W. J. Li, "Ultra-low-power polymer thin film encapsulated carbon nanotube thermal sensors," in Proc. 4th IEEE Conf. Nanotechnol., Aug. 2004, pp. 158-160.
7. C. K. M. Fung, V. T. S. Wong, R. H. M. Chan, and W. J. Li, "Dielectrophoretic batch fabrication of bundled carbon nanotube thermal sensors," IEEE Trans. Nanotechnol., vol. 3, no. 3, pp. 395-403, Sep. 2004.
8. T. W. Ebbesen, H. J. Lezec, H. Hiura, J. W. Bennett, H. F. Ghaemi, and T. Thio, "Electrical conductivity of individual carbon nanotubes," Nature, vol. 382, no. 6586, pp. 54-56, Jul. 1996.
9. N. Sinha, J. Ma, and J. T. W. Yeow, "Carbon nanotube-based sensors," J. Nanosci. Nanotechnol., vol. 6, no. 3, pp. 573-90, Mar. 2006.
10. A. Jorio, G. Dresselhaus, and M. S. Dresselhaus, Carbon Nanotubes, Advanced Topics in the Synthesis, Structure, Properties, and Applications. New York, NY, USA: Springer, 2008.
11. C. R. Field, J. Yeom, A. Salehi-Khojin, and R. I. Masel, "Robust fabrication of selective and reversible polymer coated carbon nanotubebased gas sensors," Sens. Actuators B, Chem., vol. 148, no. 1, pp. 315-322, Jun. 2010.
12. N. L. Lala, V. Thavasi, and S. Ramakrishna, "Preparation of surface adsorbed and impregnated multi-walled carbon nanotube/nylon-6 nanofiber composites and investigation of their gas sensing ability," Sensors, vol. 9, no. 1, pp. 86-101, Jan. 2009.
13. J. Li, Y. Lu, Q. Ye, M. Cinke, J. Han, and M. Meyyappan, "Carbon nanotube sensors for gas and organic vapor detection," Nano Lett., vol. 3, no. 7, pp. 929-933, Jul. 2003.
14. O. K. Varghese, P. D. Kichambre, D. Gong, K. G. Ong, E. C. Dickey, and C. A. Grimes, "Gas sensing characteristics of multi-wall carbon nanotubes," Sens. Actuators B, Chem., vol. 81, no. 1, pp. 32-41, Dec. 2001.
15. T. Ueda, S. Katsuki, K. Takahashi, H. A. Narges, T. Ikegami, and F. Mitsugi, "Fabrication and characterization of carbon nanotube based high sensitive gas sensors operable at room temperature," Diamond Rel. Mater., vol. 17, nos. 7-10, pp. 1586-1589, Jul. 2008.
16. E. K. Wujcik and C. N. Monty, "Nanotechnology for implantable sensors: Carbon nanotubes and graphene in medicine," Wiley Interdiscipl. Rev., Nanomed. Nanobiotechnol., vol. 5, no. 3, pp. 233-249, May 2013.
17. B. De Schoenmaker, L. Van der Schueren, S. De Vrieze, P. Westbroek, and K. De Clerck, "Wicking properties of various polyamide nanofibrous structures with an optimized method," J. Appl. Polym. Sci., vol. 120, no. 1, pp. 305-310, Apr. 2011.
18. M. B. Bazbouz and G. K. Stylios, "The tensile properties of electrospun nylon 6 single nanofibers," J. Polym. Sci. B, Polym. Phys., vol. 48, no. 15, pp. 1719-1731, Aug. 2010.
19. A. Sun, Z. Li, T. Wei, Y. Li, and P. Cui, "Highly sensitive humidity sensor at low humidity based on the quaternized polypyrrole composite film," Sens. Actuators B, Chem., vol. 142, no. 1, pp. 197-203, Oct. 2009.
20. M.-Z. Yang, C.-L. Dai, and D.-H. Lu, "Polypyrrole porous micro humidity sensor integrated with a ring oscillator circuit on chip," Sensors, vol. 10, no. 11, pp. 10095-10104, Nov. 2010.
21. J.-H. Cho, J.-B. Yu, J.-S. Kim, S.-O. Sohn, D.-D. Lee, and J.-S. Huh, "Sensing behaviors of polypyrrole sensor under humidity condition," Sens. Actuators B, Chem., vol. 108, nos. 1-2, pp. 389-392, Jul. 2005.
22. P. N. Bartlett and S. K. Ling-Chung, "Conducting polymer gas sensors part II: Response of polypyrrole to methanol vapour," Sens. Actuators, vol. 19, no. 2, pp. 141-150, Aug. 1989.
23. J. J. Miasik, A. Hooper, and B. C. Tofield, "Conducting polymer gas sensors," J. Chem. Soc., Faraday Trans. 1, Phys. Chem. Condens. Phases, vol. 82, no. 4, pp. 1117-1126, 1986.
24. H. Lee, H. Kim, M. Cho, J. Choi, and Y. Lee, "Fabrication of polypyrrole (PPy)/carbon nanotube (CNT) composite electrode on ceramic fabric for supercapacitor applications," Electrochim. Acta, vol. 56, no. 22, pp. 7460-7466, Sep. 2011.
25. H.-S. Oh, K. Kim, and H. Kim, "Polypyrrole-modified hydrophobic carbon nanotubes as promising electrocatalyst supports in polymer electrolyte membrane fuel cells," Int. J. Hydrogen Energy, vol. 36, no. 18, pp. 11564-11571, Sep. 2011.
26. P. D. Tam and N. V. Hieu, "Conducting polymer film-based immunosensors using carbon nanotube/antibodies doped polypyrrole," Appl. Surf. Sci., vol. 257, no. 23, pp. 9817-9824, Sep. 2011.
27. K. H. An, S. Y. Jeong, H. R. Hwang, and Y. H. Lee, "Enhanced sensitivity of a gas sensor incorporating single-walled carbon nanotube-polypyrrole nanocomposites," Adv. Mater., vol. 16, no. 12, pp. 1005-1009, Jun. 2004.
28. P. Qi et al., "Toward large arrays of multiplex functionalized carbon nanotube sensors for highly sensitive and selective molecular detection," Nano Lett., vol. 3, no. 3, pp. 347-351, Mar. 2003.
29. C. M. Chang and Y. L. Liu, "Electrical conductivity enhancement of polymer/multi-walled carbon nanotube (MWCNT) composites by thermally-induced de-functionalization of MWCNTs," ACS Appl. Mater. Inter., vol. 3, no. 7, pp. 2204-2208, Jun. 2011.
30. B. Pradhan, S. K. Batabyal, and A. J. Pal, "Functionalized carbon nanotubes in donor/acceptor-type photovoltaic devices," Appl. Phys. Lett., vol. 88, no. 9, p. 093106, Feb. 2006.
31. Y. Bai, D. Lin, F. Wu, Z. Wang, and B. Xing, "Adsorption of triton X-series surfactants and its role in stabilizing multi-walled carbon nanotube suspensions," Chemosphere, vol. 79, no. 4, pp. 362-367, Apr. 2010.
32. P. V. Kodgire, A. R. Bhattacharyya, S. Bose, N. Gupta, A. R. Kulkarni, and A. Misra, "Control of multiwall carbon nanotubes dispersion in polyamide6 matrix: An assessment through electrical conductivity," Chem. Phys. Lett., vol. 432, no. 4, pp. 480-485, Dec. 2006.
33. E. K. Wujcik, N. J. Blasdel, D. Trowbridge, and C. N. Monty, "Ion sensor for the quantification of sodium in sweat samples," IEEE Sensors J., vol. 13, no. 9, pp. 3430-3436, Sep. 2013.
34. E. A. Huff, W. R. Ledoux, J. S. Berge, and G. K. Klute, "Measuring residual limb skin temperatures at the skin-prosthesis interface," J. Prosthetics Orthotics, vol. 20, no. 4, pp. 170-173, 2008.
35. J. T. Peery, W. R. Ledoux, and G. K. Klute, "Residual-limb skin temperature in transtibial sockets," J. Rehabil. Res. Develop., vol. 42, no. 2, pp. 147-154, 2005.
36. D. G. Armstrong, K. Holtz-Neiderer, C. Wendel, M. J. Mohler, H. R. Kimbriel, and L. A. Lavery, "Skin temperature monitoring reduces the risk for diabetic foot ulceration in high-risk patients," Amer. J. Med., vol. 120, no. 12, pp. 1042-1046, Dec. 2007.
37. S. J. Benbow, A. W. Chan, D. R. Bowsher, G. Williams, and I. A. Macfarlane, "The prediction of diabetic neuropathic plantar foot ulceration by liquid-crystal contact thermography," Diabetes Care, vol. 17, no. 8, pp. 835-839, 1994.