A review of the state of the art in tools and techniques used to evaluate remanufacturing feasibility

Journal of Cleaner Production

Volumn 81, Issue , 2014, Pages 1-15

  Goodall, Paul ^a   Rosamond, Emma ^a   Harding, Jenifer ^a  

^a LOUGHBOROUGH UNIVERSITY   (United Kingdom)

Author keywords

Decision making; Remanufacturing; Sustainability

Indexed keywords

CODES (SYMBOLS); DECISION MAKING; INFORMATION SERVICES; PRODUCT DESIGN; SEARCH ENGINES;

BIBLIOGRAPHIC DATABASE; CONTENT ANALYSIS; OPERATIONAL TOOLS; REMANUFACTURING; RESEARCH OBJECTIVES; SUSTAINABLE BUSINESS; TOOLS AND METHODS; TOOLS AND TECHNIQUES;

SUSTAINABLE DEVELOPMENT;

SCOPUS;

EID: 84905565287     PISSN: 09596526     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jclepro.2014.06.014     Document Type: Review

References (83)

1. D.P. Adler, P.A. Ludewig, V. Kumar, and J.W. Sutherland Comparing Energy and Other Measures of Environmental Performance in the Original Manufacturing and Remanufacturing of Engine Components 2007
2. M. Anityasari, and H. Kaebernick A concept of reliability evaluation for reuse and remanufacturing Int. J. Sustain. Manuf. 1-2 2008 3 17
3. M. Anityasari, Han Bao, and H. Kaebernick Evaluation of Product Reusability Based on a Technical and Economic Model: a Case Study of Televisions 2005 Electronics and the Environment, 2005. Proceedings of the 2005 IEEE International Symposium on, 199-204
4. A. Atasu, M. Sarvary, and L.N. Van Wassenhove Remanufacturing as a marketing strategy Manag. Sci. 10 2008 1731 1746
5. R. Ayres, G. Ferrer, and T. Van Leynseele Eco-efficiency, asset recovery and remanufacturing Eur. Manag. J. 5 1997 557 574
6. S. Barker, and A. King The Development of a Remanufacturing Design Platform Model (RDPM): Applying Design Platform Principles to Extend Remanufacturing Practice into New Industrial Sectors 2006 399 404
7. S. Behdad, A.S. Williams, and D. Thurston End-of-Life decision making with uncertain product return quantity J. Mech. Des. 10 2012 100902
8. M. Boehm, and O. Thomas Looking beyond the rim of one's teacup: a multidisciplinary literature review of product-service systems in information systems, business management, and engineering & Design J. Clean. Prod. 0 2013 245 260
9. A. Boustani, S. Sahni, S. Graves, and T. Gutowski Appliance Remanufacturing and Life Cycle Energy and Economic Savings 2010 1 6
10. B. Bras, and M.W. McIntosh Product, process, and organizational design for remanufacture - an overview of research Robot. Comput. Integr. Manuf. 3 1999 167 178
11. H. Cao, L. Zhang, and F. Liu Deployment model for part reuse in customized design of remanufactured products IET Conf. Publ. 2010 7 12 565 CP
12. Thomas Chen, and Jun-Nan Wu Neural Network Model for Product End-of-life Strategies 2003 Electronics and the Environment, 2003. IEEE International Symposium on, 159-164
13. PRé Consultants Eco-indicator 99 Manual for Designers 2000 July
14. T. Daimon, S. Kondoh, and Y. Umeda Proposal of Decision Support Method for life Cycle Strategy by Estimating Value and Physical Lifetimes 2003 Environmentally Conscious Design and Inverse Manufacturing, 2003. EcoDesign '03. 2003 3rd International Symposium on, 109-116
15. M.P. de Brito, and E.A. van der Laan Inventory control with product returns: the impact of imperfect information Eur. J. Oper. Res. 1 2009 85 101
16. S. Dowlatshahi A strategic framework for the design and implementation of remanufacturing operations in reverse logistics Int. J. Prod. Res. 16 2005 3455 3480
17. Y. Du, H. Cao, F. Liu, C. Li, and X. Chen An integrated method for evaluating the remanufacturability of used machine tool J. Clean. Prod. 1 2012 82 91
18. I. Dunmade PLETS Model: a Sustainability Concept Based Approach to Product End-of-life Management 2004 118 126
19. T. Dyllick, and K. Hockerts Beyond the business case for corporate sustainability Bus. Strategy Environ. 2 2002 130 141
20. G. Ferrer, and M.E. Ketzenberg Value of information in remanufacturing complex products IIE Trans. 3 2004 265 277
21. M.R. Galbreth, and J.D. Blackburn Optimal acquisition quantities in remanufacturing with condition uncertainty Prod. Oper. Manag. 1 2010 61 69
22. A. Gehin, P. Zwolinski, and D. Brissaud A tool to implement sustainable end-of-life strategies in the product development phase J. Clean. Prod. 5 2008 566 576
23. J. Gerrard, and M. Kandlikar Is European end-of-life vehicle legislation living up to expectations? Assessing the impact of the ELV Directive on 'green' innovation and vehicle recovery J. Clean. Prod. 1 2007 17 27
24. Z. Ghazalli, and A. Murata Development of an AHP-CBR evaluation system for remanufacturing: end-of-life selection strategy Int. J. Sustain. Eng. 1 2011 2 15
25. C. Goldey, E. Kuester, R. Mummert, T. Okrasinski, D. Olson, and W. Schaeffer Lifecycle Assessment of the Environmental Benefits of Remanufactured Telecommunications Product Within a "green" Supply Chain 2010 1 6
26. B. Gonzalez, and B. Adenso-Diaz A bill of materials-based approach for end-of life decision making in design for the environment Int. J. Prod. Res. 10 2005 2071 2099
27. V.D.R. Guide Production planning and control for remanufacturing: industry practice and research needs J. Oper. Manage 4 2000 467 483
28. Guide Jr., R. V.Daniel, and L.N. Van Wassenhove The evolution of closed-loop Supply chain research Oper. Res. 1 2009 10 18
29. T.G. Gutowski, S. Sahni, A. Boustani, and S.C. Graves Remanufacturing and energy savings Environ. Sci. Technol. 10 2011 4540
30. G.D. Hatcher, W.L. Ijomah, and J.F.C. Windmill Design for remanufacture: a literature review and future research needs J. Clean. Prod. 17-18 2011 2004 2014
31. G. Hubbard Measuring organizational performance: beyond the triple bottom line Bus. Strategy Environ. 3 2009 177 191
32. F. Iberahim, D.A. Wahab, Z.M. Nopiah, and S. Abdullah Establishment of Remanufacturing Index for Locally Manufactured Automotive Components 2011 77 80 Advanced Design and Manufacture Iv
33. W.L. Ijomah Addressing decision making for remanufacturing operations and design-for-remanufacture Int. J. Sustain. Eng. 2 2009 91
34. W.L. Ijomah, C.A. McMahon, G.P. Hammond, and S.T. Newman Development of design for remanufacturing guidelines to support sustainable manufacturing Robot. Comput. Integr. Manuf. 6 2007 712 719
35. M.A. Ilgin, and S.M. Gupta Environmentally conscious manufacturing and product recovery (ECMPRO): a review of the state of the art J. Environ. Manage 3 2010 563 591
36. M.A. Ilgin, and S.M. Gupta Performance improvement potential of sensor embedded products in environmental supply chains Resour. Conserv. Recycl. 6 2011 580 592
37. K. Inderfurth Impact of uncertainties on recovery behavior in a remanufacturing environment: a numerical analysis Int. J. Phys. Distrib. Logist. Manag. 5 2005 318 336
38. K. Inderfurth, and K. Mukherjee Decision support for spare parts acquisition in post product life cycle Central Eur. J. Oper. Res. 1 2008 17 42
39. K. Intlekofer, B. Bras, and M. Ferguson Energy implications of product leasing Environ. Sci. Technol. 12 2010 4409 4415
40. H.-. Jun, M. Cusin, D. Kiritsis, and P. Xirouchakis A multi-objective evolutionary algorithm for EOL product recovery optimization: turbocharger case study Int. J. Prod. Res. 18-19 2007 4573 4594
41. H. Jun, D. Lee, J. Kim, and D. Kiritsis Heuristic algorithms for minimising total recovery cost of end-of-life products under quality constraints Int. J. Prod. Res. 19 2012 5330 5347
42. W. Kerr, and C. Ryan Eco-efficiency gains from remanufacturing: a case study of photocopier remanufacturing at Fuji Xerox Australia J. Clean. Prod. 1 2001 75 81
43. A.M. King, S.C. Burgess, W. Ijomah, and C.A. McMahon Reducing waste: repair, recondition, remanufacture or recycle? Sustain. Dev. 4 2006 257 267
44. M. Klausner, W.M. Grimm, C. Hendrickson, and A. Horvath Sensor-based data recording of use conditions for product takeback 1998 Electronics and the Environment, 1998. ISEE-1998. Proceedings of the 1998 IEEE International Symposium on, 138-143
45. M. Krill, and D.L. Thurston Remanufacturing: impacts of sacrificial cylinder liners J. Manuf. Sci. Eng. 3 2005 687 697
46. V. Kumar, P.S. Shirodkar, J.A. Camelio, and J.W. Sutherland Value flow characterization during product lifecycle to assist in recovery decisions Int. J. Prod. Res. 18-19 2007 4555 4572
47. H.B. Lee, N.W. Cho, and Y.S. Hong A hierarchical end-of-life decision model for determining the economic levels of remanufacturing and disassembly under environmental regulations J. Clean. Prod. 13 2010 1276 1283
48. D. Li, and W. Li Technical economic analysis of remanufacturing of large-scale food processing equipments Adv. Manuf. Syst. Pts 1-3 2011 1033 1036
49. R.T. Lund Remanufacturing Technol. Rev. 1984 18 23
50. R.T. Lund Remanufacturing: the Experience of the United States and Implications for Developing Countries 1985 World Bank Technical Paper
51. M. Matsumoto, and Y. Umeda An analysis of remanufacturing practices in Japan J. Reman. 2011
52. A. Mayyas, A. Qattawi, M. Omar, and D. Shan Design for sustainability in automotive industry: a comprehensive review Renew. Sustain. Energy Rev. 4 2012 1845 1862
53. R. McKenna, S. Reith, S. Cail, A. Kessler, and W. Fichtner Energy savings through direct secondary reuse: an exemplary analysis of the German automotive sector J. Clean. Prod. 2013 103 112
54. M. Michaud, G.J. Sroka, and R.E. Benson Refurbishing wind turbine gears Gear Solutions 99 2011 28 39
55. J. Östlin, E. Sundin, and M. Björkman Product life-cycle implications for remanufacturing strategies J. Clean. Prod. 11 2009 999 1009
56. V. Pandey, and D. Thurston Variability and component criticality in component reuse and remanufacturing systems J. Comput. Inf. Sci. Eng. 4 2010 041004
57. H.J. Parkinson, and G. Thompson Analysis and taxonomy of remanufacturing industry practice Proc. Inst. Mech. Eng. Part J. Process Mech. Eng. 3 2003 243 256
58. K.K. Pochampally, and S.M. Gupta Use of linear physical programming and Bayesian updating for design issues in reverse logistics Int. J. Prod. Res. 5 2012 1349 1359
59. K.K. Pochampally, S. Vadde, S.V. Kamarthi, and S.M. Gupta Beyond sensor-assisted diagnosis of used products Environ. Conscious Manuf. Iv 2004 138 146
60. A. Presley, L. Meade, and J. Sarkis A strategic sustainability justification methodology for organizational decisions: a reverse logistics illustration Int. J. Prod. Res. 18-19 2007 4595 4620
61. J. Quariguasi-Frota-Neto, and J. Bloemhof An analysis of the eco-efficiency of remanufactured personal computers and mobile phones Prod. Oper. Manag. 1 2012 101 114
62. P. Rathore, S. Kota, and A. Chakrabarti Sustainability through remanufacturing in India: a case study on mobile handsets J. Clean. Prod. 15 2011 1709 1722
63. J. Sarkis A strategic decision framework for green supply chain management J. Clean. Prod. 4 2003 397 409
64. E.M. Schau, M. Traverso, A. Lehmann, and M. Finkbeiner Life cycle costing in sustainability assessment - a case study of remanufactured alternators Sustainability 11 2011 2268 2288
65. M.A. Seitz A critical assessment of motives for product recovery: the case of engine remanufacturing J. Clean. Prod. 11-12 2007 1147 1157
66. P. Shrivastava, H.C. Zhang, Jianzhi Li, and A. Whitely Evaluating Obsolete Electronic Products for Disassembly, Material Recovery and Environmental Impact Through a Decision Support System 2005 Electronics and the Environment, 2005. Proceedings of the 2005 IEEE International Symposium on, 221-225
67. V.M. Smith, and G.A. Keoleian The value of remanufactured engines: life-cycle environmental and economic perspectives J. Ind. Ecol. 1-2 2004 193 221
68. T. Spengler, and W. Stolting Life cycle costing for strategic evaluation of remanufacturing systems Prog. Ind. Ecol. Int. J. 1-2 2008 65 81
69. R. Subramoniam, D. Huisingh, and R.B. Chinnam Remanufacturing for the automotive aftermarket-strategic factors: literature review and future research needs J. Clean. Prod. 13 2009 1163 1174
70. R. Subramoniam, D. Huisingh, and R.B. Chinnam Aftermarket remanufacturing strategic planning decision-making framework: theory & practice J. Clean. Prod. 16-17 2010 1575 1586
71. R. Subramoniam, D. Huisingh, R.B. Chinnam, and S. Subramoniam Remanufacturing Decision-Making Framework (RDMF): research validation using the analytical hierarchical process J. Clean. Prod. 0 2013 212 220
72. E. Sundin, and B. Bras Making functional sales environmentally and economically beneficial through product remanufacturing J. Clean. Prod. 9 2005 913 925
73. E. Sundin, and M. Lindahl Rethinking Product Design for Remanufacturing to Facilitate Integrated Product Service Offerings 2008 Electronics and the Environment, 2008. ISEE 2008. IEEE International Symposium on, 1-6
74. M.C. Thierry, M. Salomon, J.v. Nunen, and L.v Wassenhove Strategic issues in product recovery management Calif. Manage. Rev. 2 1995 114 135
75. B. Walsh PSS for Product Life Extension through Remanufacturing 2010 261 268
76. Q. Wang, and C. Li Risk assessment for remanufacturing system based on neural network Adv. Mater. Res. 2011 1382 1385
77. W. Wang, and M.M. Tseng Economic analysis of product end-of-life strategies to achieve design for sustainable manufacturing IET Conf. Publ. 565 2010 268 272 CP
78. A. Xanthopoulos, and E. Iakovou On the optimal design of the disassembly and recovery processes Waste Manage 5 2009 1702 1711
79. K. Xing, and L. Luong Modelling and evaluation of product fitness for service life extension J. Eng. Des. 3 2009 243 263
80. K. Xing, M. Belusko, L. Luong, and K. Abhary An evaluation model of product upgradeability for remanufacture Int. J. Adv. Manuf. Technol. 1 2007 1 14
81. M. Yang, and M. Chen Life cycle of remanufactured engines J. Cent. South Univ. Technol. 2005 81 85
82. H.C. Zhang, J. Li, P. Shrivastava, A. Whitley, and M.E. Merchant A web-based system for reverse manufacturing and product environmental impact assessment considering end-of-life dispositions CIRP Ann. Manuf. Technol. 1 2004 5 8
83. J. Zhou, P. Huang, Y. Zhu, and J. Deng A quality evaluation model of reuse parts and its management system development for end-of-life wheel loaders J. Clean. Prod. 0 2012 239 249