Product, process, and organizational design for remanufacture - An overview of research

Robotics and Computer-Integrated Manufacturing

Volumn 15, Issue 3, 1999, Pages 167-178

  Bras, Bert ^a   McIntosh, Mark W ^a  

^a GEORGIA INSTITUTE OF TECHNOLOGY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ENVIRONMENTAL PROTECTION; PROCESS ENGINEERING; PRODUCTION ENGINEERING; SYSTEMS ANALYSIS;

REMANUFACTURING PROCESS;

COMPUTER INTEGRATED MANUFACTURING;

EID: 0032689276     PISSN: 07365845     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0736-5845(99)00021-6     Document Type: Review

References (82)

1. Lund R, Skeels F. Guidelines for an original equipment manufacturer starting a remanufacturing operation, Government Report, DOE/CS/40192, CPA-83-8. Cambridge, MA: Massachusetts Institute of Technology, Center for Policy Alternatives, 1983.
2. Lund R, Denny W. Opportunities and implications of extending product life. Symp on Product Durability and Life, Gaithersburg, MD, 1977;1-11.
3. Lund R. Remanufacturing, Technol Rev 1984;87(2):19-23,28-9.
4. Thierry M, Solomon M, Van Nunen J, Van Wassenhove L. Strategic issues in product recovery management. California Mgmt Rev 1995;37(2): 114-35.
5. Paton B. Market considerations in the reuse of electronics products. IEEE Int Symp on Electronics and the Environment. New York: IEEE, 1994; 115-7.
6. Brown W, Davis R. Design for retrofit, rebuild, and remanufacture. Proc the 2nd Industrial Engineering Research Conf, Los Angeles, CA. Norcross, GA: IIE, 19XX;21-4.
7. Hormozi A. Parts remanufacturing in the automotive industry. Prod Invent Mgmt J 1997;38(1):26-31.
8. Kuuva M, Airila M. Conceptual approach on design for practical product recycling. ASME Design for Manufacturability Conf, Chicago, IL, 1994;115-23.
9. Di Rodi V. A resource recovery model for end-of-life electronics. IEEE Int Symp on Electronics and the Environment. New York: IEEE, 1996;78-80.
10. Klussman K. Just-in-case: the land of remanufacturing, Annual Int Conf Proc - American Production and Inventory Control Society. New Orleans, LA: Falls Church, VA: APICS, 1990;65-9.
11. VDI. Konstruieren recyclinggerechter technischer produkte (designing technical products for ease of recycling). VDI 2243, VDI (Verein Deutscher Ingenieure) - Gesellschaft Entwicklung Konstruction Vertrieb (Association of German Engineers), Germany, 1993.
12. Warnecke H, Steinhilper R. Remanufacturing of products - technologies and appropriate product design. Towards the factory of the future. In: Bullinger H, Warnecke H, editors. Proc 8th Int Conf on Production Research, Stuttgart, West Germany. New York: Springer, 1985;204-8.
13. EPA. Life cycle design guidance manual: environmental requirements and the product system. EPA/600/R-92/226, US Environmental Protection Agency. Washington, DC, 1993.
14. Cooper T. The re-use of consumer durables in the UK: obstacles and opportunities. In: De Ron A, Douwe-Flapper S, editors. Proc 1st Int Workshop on Reuse, Eindhoven, The Netherlands, 1996;63-72.
15. Berko-Boateng V, Azar J, de Jong E, Yander G. Asset recycle management - a total approach to product design for the environment. IEEE Int Symp on Electronics and the Environment. Arlington, VA: IEEE, 1993;19-31.
16. Seaver W. Design considerations for remanufacturability, and recyclability of user interface modules. IEEE Int Symp on Electronics and the Environment. New York: IEEE, 1994;241-45.
17. Azar J, Berko-Boateng V, Calkins P, de Jong E, George J, Hilbert H. Agent of change: xerox design for the environment program. IEEE Int Symp on Electronics and the Environment. Orlando, FL: IEEE, 1995;51-61.
18. Reyes W, Moore M, Bartholomew C, Currence R, Seigel R. Reliability assessment of used parts: an enabler for asset recovery. IEEE Int Symp on Electronics and the Environment. Orlando, FL: IEEE, 1995;89-94.
19. Hammond R, Amezuita T, Bras B. Issues in the automotive parts remanufacturing industry: a discussion of results from surveys performed among remanufacturers. Eng Des Autom 1998;4(1):27-46.
20. Hendrickson C, Lave L, McMichael F, Siewiorek D, Smailagic A, Wu T. Product disposal and re-use issues for portable computer design. IEEE Int Symp on Electronics and the Environment 1994;109-13.
21. Mizuki C, Aanstoos T, Pitts G, Nichols S. CRT disposition: an assessment of limitations and opportunities in reuse, refurbishment, and recycling in the US. IEEE Int Symp on Electronics and the Environment 1997;73-8.
22. Anonymous. Everything old can be new again. Wire Industry 1993;60(713):291-2.
23. Herb (1984).
24. Lambert A, Splinter, M. Reuse of sophisticated product carriers, De Ron A, Douwe-Flapper S, editors. Proc 1st Int Workshop on Reuse, Eindhoven, The Netherlands, 1996;213-22.
25. Amezquita T. Lean remanufacturing in the automotive industry. Atlanta, GA: MS Thesis, George W. WoodruffSchool of Mechanical Engineering, Georgia Institute of Technology, 1996.
26. Stahel W. The utilization-focused service economy: resource efficiency and product-life extension. The Greening of Industrial Ecosystems. National Academy Press, Washington, DC, 1994;178-90.
27. Haynsworth H, Lyons R. Remanufacturing by design, the missing link. Prod Invent Mgmt 1987;28(2):24-9.
28. Matthews HS, Lave LB, Price setting for green design. IEEE Int Symp on Electronics and the Environment. Orlando, FL, IEEE, 1995;304-9.
29. OTA. Green products by design: choices for a cleaner environment. OTA-E-541, Office of Technological Assessment, Washington, DC, 1992.
30. Cramer J. Pros and cons of optimizing the life of consumer electronics products. In: De Ron A, Douwe-Flapper S, editors. Proc 1st Int Workshop on Reuse, Eindhoven, The Netherlands, 1996;73-84.
31. Nasr N, Varel E. Total product life-cycle analysis and costing, Proc. the 1997 Total Life Cycle Conf. - Life Cycle Management and Assessment (Part 1), Warrendale, PA: SAE International, 1997;9-15.
32. Beretta J, Costello M, Mallinder G, Schinzing R. Remanufacturing: The optimum solution for life cycle planning, Proc 1997 Total Life Cycle Conf - Design for the Environment, Recycling, and Environmental Impact (Part 2). Warrandale, PA: SAE International, 1997;77-83.
33. Steinhilper R. Design for recycling and remanufacturing of mechatronic and electronic products: challenges, solutions and practical examples from a european viewpoint, ASME Design for Manufacturability Conf, vol. 67, Chicago, IL: ASME DE, 1994;65-76.
34. Marks MD, Eubanks CF, Ishii K. Life-cycle clumping of product designs for ownership and retirement. Fifth Int Conf on Design Theory and Methodology, ASME Design Engineering Technical Conferences. Albuquerque, New Mexico, 1993;83-90.
35. Di Marco P, Eubanks C, Ishii K. Compatibility analysis of product design for recyclability and reuse. Proc 1994 ASME Int Computers in Engineering Conf and Exhibition, Minneapolis, MN: ASME, 1994; 105-12.
36. Ishii K. Life-cycle engineering design, Proc 1995 National Design Engineering Show and Conf, 81. Chicago, IL: ASME, DE, 1995;39-45.
37. Ishii K, Lee B, Eubanks C. Design for product retirement and modularity based on technology life-cycle. Proc 1995 ASME Int Mech Engineering Conf and Exposition, vol. 2-2, San Francisco, CA, 1995;921-33.
38. Lee B, Ishii K. Demanufacturing complexity metrics in design for recyclability. IEEE Int Symp on Electronics and the Environment, IEEE. 1997;19-24.
39. Scheuring J, Bras B, Lee K. Effects of design for disassembly on integrated disassembly and assembly processes. Proc 4th Int. Conf. on Computer Integrated Manufacturing and Automation Technology. Renselaer Polytechnique Institute, Troy, NY; (1994):53-9.
40. Amezquita T, Hammond R, Bras B. Design for remanufacturing. ICED95: Int Conf on Engineering Design. Prague, Czech Republic: Heurista, 1995; 1060-5.
41. Amezquita T, Hammond RM, Salazar M, Bras B. Characterizing the remanufacturability of engineering systems 21st Annual Design Automation Conf. vol. 82, New York: ASME, DE, 1995;271-8.
42. Bras B, Hammond R. Design for remanufacturing metrics. In: De Ron A, Douwe-Flapper S, editors. Proc 1st Int Workshop on Reuse, Eindhoven, The Netherlands, 1996;35-52.
43. Newcomb P, Bras B, Rosen D. Implications of modularity on product design for the life cycle, Int Conf on Design Theory and Methodolog, ASME Design Engineering Technical Conf and Computers in Engineering Conf, Irvine, CA, 1996;1-12.
44. Chen R, Navin-Chandra D, Prinz F. Product design for recyclability: a cost benefit analysis model and its application. IEEE Int Symp on Electronics and the Environment. Arlington, VA: IEEE, 1993;178-83.
45. Emblemsvåg J, Bras B. The use of activity-based costing, uncertainty, and disassembly action charts in demanufacture cost assessments. 1995 ASME Advances in Design Automation Conf, 1995 ASME Design Engineering Technical Conf and Computers in Engineering Conf, DE-vol. 82. Boston, MA: ASME, 1995;285-92.
46. Low M, Williams D, Dixon C. Choice of end-of-life product management strategy: a case study in alternative telephone concepts. IEEE Int Symp Electronics and the Environment, IEEE. 1996;112-7.
47. Low M, Williams D, Dixon C. The economics of end of life management strategy choice: routes to revenue generation from mature products, IEEE Int Symp on Electronics and the Environment, New York:IEEE, 1997;291-6.
48. Richter K, Dobos I. Solving the integer EOQ repair and waste disposal problem. In: De Ron A, Douwe-Flapper, S, editors. Proc 1st Int Workshop on Reuse Eindhoven, The Netherlands, 1996;247-55.
49. Shu L, Flowers W. A structured approach to design for remanufacture, Proc 1993 ASME Winter Annual Meeting, vol. 66. New Orleans, LA: ASME, DE, 1993;13-9.
50. Shu L, Flowers W. Considering remanufacture and other end-of-life options in selection of fastening and joining methods," IEEE Int Symp on Electronics and the Environment, Orlando, FL: IEEE, 1995;1-6.
51. Scheidt L, Zong S. An approach to achieve reusability of electronic modules. IEEE Int. Symp. on Electronics and the Environment, New York: IEEE, 1994;331-6.
52. Navin-Chandra, D. Restar: a design tool for the environmental recovery analysis, ICED93: Int Conf on Engineering Design, The Hague, The Netherlands: Heurista, 1993;780-7.
53. Li W, Zhang C, Wang B, Awoniyi S. Design for disassembly analysis for environmentally conscious design and manufacturing. Proc 1995 ASME Int Mech Engineering Congress and Exposition, vol, 2-2. San Francisco, California: ASME, 1995;969-76.
54. Yan X, Gu P. Assembly/disassembly sequence planning for life cycle cost estimation. Proc 1995 ASME Int Mech Eng Congr and Exposition, vol. 2, San Francisco, CA: ASME, MED, 1995;935-56.
55. Gupta S, Taleb K. An algorithm to disassemble multiple product structures with multiple occurence of parts. In: De Ron A, Douwe-Flapper S, editors. Proc 1st Int Workshop on Reuse, Eindhoven, The Netherlands, 1996;153-62.
56. Siddique Z, Rosen, DW. An approach to virtual prototyping for product disassembly, Computers in Engineering Conf, ASME Design Engineering Technical Conf and Computers in Engineering Conf, Irvine, CA, August 18-22, 1996.
57. Boothroyd G, Alting L. Design for assembly and disassembly. Ann CIRP 1992;41(2):625-36.
58. Moyer LK, Gupta SM. Environmental concerns and recycling/disassembly efforts in the electronics industry. J. Electronics Manufacturing 1997;7(1):l-22.
59. Coulter SL, Bras BA, Winslow G, Yester S. Designing for material separation: lessons from the automotive recycling. J Mech Des 1998;120(3):501-9.
60. Hendrix J, Massey KA, Whitham E, Bras B, Russell M. Technologies for the identification, separation, and recycling of automotive plastics. Int J Environmentally Conscious Design and Manufacturing 1997;6(2):37-50.
61. Fleischmann M, Bloemhoff-Ruwaard JM, Dekker R, Van der Laan E, Van Nunen JAEE, Van Wassenhove LN. Quantitative models for reverse logistics: a review. European J Oper Res 1997;103:1-17.
62. Guide V, Srivastava R. Buffering from material recovery uncertainty in a recoverable manufacturing environment. J Oper Res Soc 1997;48(5):519-29.
63. Guide V, Srivastava R. An evaluation of order release strategies in a remanufacturing environment. Comput Oper Res 1997; 24(1):37-47.
64. Guide V, Srivastava R. Scheduling policies for remanufacturing. Int J Prod Econom 1997;48(2):187-204.
65. Guide V, Srivastava R, Spencer M. An evaluation of capacity planning techniques in a remanufacturing environment. Int J Prod Res 1997;35(1):67-82.
66. Anderson D. Agile Product Development for Mass Customization. Homewood, IL: Irwin, 1997.
67. Sanderson S, Uzumeri M. The innovation imperative. Irwin, 1997.
68. Amezquita T, Bras B. Lean remanufacture of an automobile clutch. In: De Ron A, Douwe-Flapper S, editors. Proc 1st Int Workshop on Reuse, Eindhoven, The Netherlands, 1996;35-52.
69. Martel R, Anger, T. Repair/remanufacturing MRP II in the US Armed Services: implementation and management issues. Annual Int Conference Proceedings - American Production and Inventory Control Society. New Orleans, LA, APICS, Falls Church, VA, 1990;141-3.
70. Boyer J. A proven technique for planning and executing core control in a remanufacturing industry. 1990 Conf Proc American Production and Inventory Control Society. New Orleans, LA: Falls Church, VA: APICS, 1990;666-9.
71. Krupp J. Core obsolescence forecasting in remanufacturing. Prod Invent Mgmt J 2nd Quarter: 1992;12-7.
72. Fleischman et al. (1998).
73. De Ron A, Douwe-Flapper S. Proc 1st Int Workshop on Reuse. The Netherlands: Eindhoven, 1996.
74. McIntosh M, Bras B. Addressing rapid innovation and mass customization challenges in an integrated manufacturing-remanufacturing organization. The 5th Int Congress on Environmentally Conscious Design and Manufacturing. Rochester Institute of Technology, Rochester, NY, June 16-17, 1998.
75. McIntosh M, Bras B. Determining the value of remanufacture in an integrated manufacturing-remanufacturing organization. Paper No. 98DETC-DFM5750, 1998 Design for Manufacture Symposium, 1998 ASME Design Engineering Tech Confs and Computers in Engineering Conf, Atlanta, GA, September, 13-16, 1998.
76. Clegg A, Williams D, Uzsoy R. Production planning for companies with remanufacturing capability. IEEE Int Symp on Electronics and the Environment. Orlando, FL: IEEE, 1995;186-91.
77. Uzsoy R. Production planning for companies with product recovery and remanufacturing capability. IEEE Int Symp on Electronics and the Environment, New York: IEEE 1997;285-9.
78. Ayres RU. Life cycle analysis: a critique. Resources, conservation and recycling 1995;14:199-223.
79. Emblemsvâg J, Bras BA. An activity-based life-cycle assessment method. Paper no. 97DETC/DFM-4376. ASME Design for Manufacturing Symp, 1997 ASME Design Engineering Technical Conf and Computers in Engineering Conf, Sacramento, CA, September 14-17, 1997.
80. Graedel TE, Allenby BR. Industrial Ecology. Englewood Cliffs, NJ: Prentice Hall, 1995.
81. Allenby BR, Richards DJ. The greening of industrial ecosystems. Washington, DC: National Academy of Engineering, 1994.
82. Shu L, Flowers W. Reliability modeling in design for remanufacture. ASME. Design Automation Conf. ASME Design Engineering Technical Confs and Computers in Engineering Conf, Irvine, CA, August 18-22, 1996.