Impact of digital impression techniques on the adaption of ceramic partial crowns in vitro

Journal of Dentistry

Volumn 42, Issue 6, 2014, Pages 677-683

  Schaefer, Oliver ^a   Decker, Mike ^a   Wittstock, Frank ^a   Kuepper, Harald ^a   Guentsch, Arndt ^a,b  

^a JENA UNIVERSITY HOSPITAL   (Germany)

^b MARQUETTE UNIVERSITY   (United States)

Author keywords

CAD CAM; Digital impressions; Internal fit; Lithium disilicate ceramics; Marginal fit

Indexed keywords

BIOMEDICAL AND DENTAL MATERIALS; DENTAL MATERIAL; DENTAL PORCELAIN; GLASS CERAMICS; LITHIA DISILICATE; POLYVINYL DERIVATIVE; SILOXANE; VINYL POLYSILOXANE;

ANATOMY AND HISTOLOGY; CERAMICS; CHEMISTRY; COMPUTER AIDED DESIGN; COMPUTER INTERFACE; DENTAL IMPRESSION; DENTAL SURGERY; ENDODONTICS; HUMAN; IMAGE PROCESSING; MOLAR TOOTH; PROCEDURES; PROSTHESIS DESIGN; SURFACE PROPERTY; TOOTH CROWN;

CERAMICS; COMPUTER-AIDED DESIGN; CROWNS; DENTAL IMPRESSION MATERIALS; DENTAL IMPRESSION TECHNIQUE; DENTAL MARGINAL ADAPTATION; DENTAL MATERIALS; DENTAL PORCELAIN; DENTAL PROSTHESIS DESIGN; HUMANS; IMAGE PROCESSING, COMPUTER-ASSISTED; MOLAR; POLYVINYLS; SILOXANES; SURFACE PROPERTIES; TOOTH PREPARATION, PROSTHODONTIC; USER-COMPUTER INTERFACE;

EID: 84901203384     PISSN: 03005712     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jdent.2014.01.016     Document Type: Article

References (28)

1. F. Beuer, and J. Schweiger Digital dentistry: an overview of recent developments for CAD/CAM generated restorations British Dental Journal 204 2008 505 511
2. G.L. Henkel A comparison of fixed prostheses generated from conventional vs digitally scanned dental impressions Compendium of Continuing Education in Dentistry 28 2007 422 431
3. A.J. Raigrodski Contemporary materials and technologies for all-ceramic fixed partial dentures: a review of the literature Journal of Prosthetic Dentistry 92 2004 557 562
4. M. Albakry, M. Guazzato, and M.V. Swain Biaxial flexural strength, elastic moduli, and X-ray diffraction characterization of three pressable all-ceramic materials Journal of Prosthetic Dentistry 89 2003 374 380
5. P.C. Guess, R.A. Zavanelli, N.R.F.A. Silva, E.A. Bonfante, P.G. Coelho, and V.P. Thompson Monolithic CAD/CAM lithium disilicate versus veneered Y-TZP crowns: comparison of failure modes and reliability after fatigue International Journal of Prosthodontics 23 2010 434 442
6. A. Keshvad, T. Hooshmand, F. Asefzadeh, F. Khalilinejad, M. Alihemmati, and R. van Noort Marginal gap, internal fit, and fracture load of leucite-reinforced ceramic inlays fabricated by CEREC inLab and hot-pressed techniques Journal of Prosthodontics 20 2011 535 540
7. S. Addi, A. Hedayati-Khams, A. Poya, and G. Sjögren Interface gap size of manually and CAD/CAM-manufactured ceramic inlays/onlays in vitro Journal of Dentistry 30 2002 53 58
8. M.R. Baig, K.B.-C. Tan, and J.I. Nicholls Evaluation of the marginal fit of a zirconia ceramic computer-aided machined (CAM) crown system Journal of Prosthetic Dentistry 104 2010 216 227
9. M. Groten, D. Axmann, L. Pröbster, and H. Weber Determination of the minimum number of marginal gap measurements required for practical in vitro testing Journal of Prosthetic Dentistry 83 2000 40 49
10. C.J. Soares, L.R.M. Martins, R.B. Fonseca, L. Correr-Sobrinho, and A.J. Fernandes Neto Influence of cavity preparation design on fracture resistance of posterior Leucite-reinforced ceramic restorations Journal of Prosthetic Dentistry 95 2006 421 429
11. A. Ender, and A. Mehl Influence of scanning strategies on the accuracy of digital intraoral scanning systems International Journal of Computerized Dentistry 16 2013 11 21
12. W.J. van der Meer, F.S. Andriessen, D. Wismeijer, and Y. Ren Application of intra-oral dental scanners in the digital workflow of implantology PLoS ONE 7 2012 e43312
13. S. Logozzo, E.M. Zanetti, and G. Franceschini Recent advances in dental optics. Part I: 3D intraoral scanners for restorative dentistry Optics and Lasers in Engineering 54 2014 203 221
14. A. Mehl, A. Ender, W.H. Mörmann, and T. Attin Accuracy testing of a new intraoral 3D camera International Journal of Computerized Dentistry 12 2009 11 28
15. S.B.M. Patzelt, A. Emmanouilidi, S. Stampf, J.R. Strub, and W. Att Accuracy of full-arch scans using intraoral scanners Clinical Oral Investigations 2013 10.1007/s00784-013-1132-y [Epub ahead of printà
16. A. Syrek, G. Reich, D. Ranftl, C. Klein, B. Cerny, and J. Brodesser Clinical evaluation of all-ceramic crowns fabricated from intraoral digital impressions based on the principle of active wavefront sampling Journal of Dentistry 38 2010 553 559
17. A. Ender, and A. Mehl Accuracy of complete-arch dental impressions: a new method of measuring trueness and precision Journal of Prosthetic Dentistry 109 2013 121 128
18. H. Rudolph, S. Quaas, M. Haim, J. Preißler, M.H. Walter, and R. Koch et al. Randomized controlled clinical trial on the three-dimensional accuracy of fast-set impression materials Clinical Oral Investigations 17 2013 1397 1406
19. P.K. Brawek, S. Wolfart, L. Endres, A. Kirsten, and S. Reich The clinical accuracy of single crowns exclusively fabricated by digital workflow-the comparison of two systems Clinical Oral Investigations 17 2013 2119 2125
20. P. Seelbach, C. Brückel, and B. Wöstmann Accuracy of digital and conventional impression techniques and workflow Clinical Oral Investigations 17 2013 1759 1764
21. S.D. Phillips Report of a special test. NIST Test No. 681/280055-10 [Internetà. Report No.: NIST Test No. 681/280055-10 2010 Available from: http://www.geomagic.com/files/2713/0333/1033/geomagic-NIST-evaluation.pdf
22. S.-Y. Kim, M.-J. Kim, J.-S. Han, I.-S. Yeo, Y.-J. Lim, and H.-B. Kwon Accuracy of dies captured by an intraoral digital impression system using parallel confocal imaging International Journal of Prosthodontics 26 2013 161 163
23. J.S. Almeida e Silva, K. Erdelt, D. Edelhoff, É. Araújo, M. Stimmelmayr, and L.C.C. Vieira et al. Marginal and internal fit of four-unit zirconia fixed dental prostheses based on digital and conventional impression techniques Clinical Oral Investigations 2013 10.1007/s00784-013-0987-2 [Epub ahead of printà
24. O. Schäfer, H. Kuepper, B.W. Sigusch, G.A. Thompson, A.F. Hefti, and A. Guentsch Three-dimensional fit of lithium disilicate partial crowns in vitro Journal of Dentistry 41 2013 271 277
25. O. Schäfer, H. Kuepper, G.A. Thompson, G. Cachovan, A.F. Hefti, and A. Guentsch Effect of CNC-milling on the marginal and internal fit of dental ceramics: a pilot study Dental Materials 29 2013 851 858
26. T.A. Hamza, H.A. Ezzat, M.M.K. El-Hossary, H.A.E.M. Katamish, T.E. Shokry, and S.F. Rosenstiel Accuracy of ceramic restorations made with two CAD/CAM systems Journal of Prosthetic Dentistry 109 2013 83 87
27. K.T. Cook, and D.J. Fasbinder Accuracy of CAD/CAM crown fit with infrared and LED cameras International Journal of Computerized Dentistry 4 2012 315 326
28. B. Giménez, M. Özcan, F. Martínez-Rus, and G. Pradíes Accuracy of a digital impression system based on active wavefront sampling technology for implants considering operator experience implant angulation, and depth Clinical Implant Dentistry and Related Research 2013 10.1111/cid.12124 [Epub ahead of printà