Peri-implant bone formation of non-thermal atmospheric pressure plasma-treated zirconia implants with different surface roughness in rabbit tibiae

Clinical Oral Implants Research

Volumn 25, Issue 5, 2014, Pages 573-579

  Shon, Won Jun ^a   Chung, Shin Hye ^a   Kim, Hong Kyun ^a   Han, Geum Jun ^a   Cho, Byeong Hoon ^a   Park, Young Seok ^a  

^a Seoul National University   (South Korea)

Author keywords

Animal experiment; Atmospheric pressure plasma; Biomaterials; Bone implant interaction; Zirconia implants

Indexed keywords

HELIUM; PLASMA GAS; TOOTH IMPLANT; ZIRCONIUM; ZIRCONIUM OXIDE;

ANIMAL; ATMOSPHERIC PRESSURE; BONE REGENERATION; DEVICE REMOVAL; IMPLANT; MALE; PHYSIOLOGY; PLASMA GAS; RABBIT; SCANNING ELECTRON MICROSCOPY; SURFACE PROPERTY; SURGERY; TIBIA; TOOTH IMPLANT; TOOTH PROSTHESIS; TORQUE;

ANIMALS; ATMOSPHERIC PRESSURE; DENTAL IMPLANTS; DENTAL PROSTHESIS DESIGN; DEVICE REMOVAL; HELIUM; IMPLANTS, EXPERIMENTAL; MALE; MICROSCOPY, ELECTRON, SCANNING; OSSEOINTEGRATION; PLASMA GASES; RABBITS; SURFACE PROPERTIES; TIBIA; TORQUE; ZIRCONIUM;

EID: 84898439817     PISSN: 09057161     EISSN: 16000501     Source Type: Journal    
DOI: 10.1111/clr.12115     Document Type: Article

References (35)

1. Akagawa, Y., Ichikawa, Y., Nikai, H. & Tsuru, H. (1993) Interface histology of unloaded and early loaded partially stabilized zirconia endosseous implant in initial bone healing. The Journal of Prosthetic Dentistry 69: 599-604.
2. Buser, D., Broggini, N., Wieland, M., Schenk, R.K., Denzer, A.J., Cochran, D.L., Hoffmann, B., Lussi, A. & Steinemann, S.G. (2004) Enhanced bone apposition to a chemically modified sla titanium surface. Journal of Dental Research 83: 529-533.
3. Cho, B.H., Han, G.J., Oh, K.H., Chung, S.N. & Chun, B.H. (2011) The effect of plasma polymer coating using atmospheric-pressure glow discharge on the shear bond strength of composite resin to ceramic. Journal of Materials Science 46: 2755-2763.
4. Chu, P.K., Chen, J.Y., Wang, L.P. & Huang, N. (2002) Plasma-surface modification of biomaterials. Materials Science and Engineering R-Reports 36: 143-206.
5. Cokeliler, D., Erkut, S., Zemek, J., Biederman, H. & Mutlu, M. (2007) Modification of glass fibers to improve reinforcement: a plasma polymerization technique. Dental Materials 23: 335-342.
6. Duske, K., Koban, I., Kindel, E., Schroder, K., Nebe, B., Holtfreter, B., Jablonowski, L., Weltmann, K.D. & Kocher, T. (2012) Atmospheric plasma enhances wettability and cell spreading on dental implant metals. Journal of Clinical Periodontology 39: 400-407.
7. Gotfredsen, K., Berglundh, T. & Lindhe, J. (2000) Anchorage of titanium implants with different surface characteristics: an experimental study in rabbits. Clinical Implant Dentistry and Related Research 2: 120-128.
8. Hayakawa, T., Yoshinari, M. & Nemoto, K. (2004) Characterization and protein-adsorption behavior of deposited organic thin film onto titanium by plasma polymerization with hexamethyldisiloxane. Biomaterials 25: 119-127.
9. Hesby, R.M., Haganman, C.R. & Stanford, C.M. (1997) Effects of radiofrequency glow discharge on impression material surface wettability. The Journal of Prosthetic Dentistry 77: 414-422.
10. Hirakawa, Y., Jimbo, R., Shibata, Y., Watanabe, I., Wennerberg, A. & Sawase, T. (2012) Accelerated bone formation on photo-induced hydrophilic titanium implants: an experimental study in the dog mandible. Clinical Oral Implants Research, doi: 10.1111/j.1600-0501.2011.02401.x (Epub ahead of print).
11. Huang, H.M., Hsieh, S.C., Teng, N.C., Feng, S.W., Ou, K.L. & Chang, W.J. (2011) Biological surface modification of titanium surfaces using glow discharge plasma. Medical and Biological Engineering and Computing 49: 701-706.
12. Kim, M.H., Lee, S.Y., Kim, M.J., Kim, S.K., Heo, S.J. & Koak, J.Y. (2011) Effect of biomimetic deposition on anodized titanium surfaces. Journal of Dental Research 90: 711-716.
13. Klein, M.O., Bijelic, A., Ziebart, T., Koch, F., Kammerer, P.W., Wieland, M., Konerding, M.A. & Al-Nawas, B. (2011) Submicron scale-structured hydrophilic titanium surfaces promote early osteogenic gene response for cell adhesion and cell differentiation. Clinical Implant Dentistry and Related Research, doi: 10.1111/j.1708-8208.2011.00339.x (Epub ahead of print).
14. Koch, F.P., Weng, D., Kramer, S., Biesterfeld, S., Jahn-Eimermacher, A. & Wagner, W. (2010) Osseointegration of one-piece zirconia implants compared with a titanium implant of identical design: a histomorphometric study in the dog. Clinical Oral Implants Research 21: 350-356.
15. Kohal, R.J., Weng, D., Bachle, M. & Strub, J.R. (2004) Loaded custom-made zirconia and titanium implants show similar osseointegration: an animal experiment. Journal of Periodontology 75: 1262-1268.
16. Kohal, R.J., Wolkewitz, M., Hinze, M., Han, J.S., Bachle, M. & Butz, F. (2009) Biomechanical and histological behavior of zirconia impants: an experiment in the rat. Clinical Oral Implants Research 20: 333-339.
17. Lang, N.P., Salvi, G.E., Huynh-Ba, G., Ivanovski, S., Donos, N. & Bosshardt, D.D. (2011) Early osseointegration to hydrophilic and hydrophobic implant surfaces in humans. Clinical Oral Implants Research 22: 349-356.
18. Le Guehennec, L., Lopez-Heredia, M.A., Enkel, B., Weiss, P., Amouriq, Y. & Layrolle, P. (2008) Osteoblastic cell behaviour on different titanium implant surfaces. Acta Biomaterialia 4: 535-543.
19. Liu, D.M. & Tseng, W.J. (1998) Influence of debinding rate, solid loading and binder formulation on the green microstructure and sintering behaviour of ceramic injection mouldings. Ceramics International 24: 471-481.
20. Oliva, J., Oliva, X. & Oliva, J.D. (2010) Five-year success rate of 831 consecutively placed zirconia dental implants in humans: a comparison of three different rough surfaces. The International Journal of Oral and Maxillofacial Implants 25: 336-344.
21. Ozden, N., Akaltan, F., Suzer, S. & Akovali, G. (1999) Time-related wettability characteristic of acrylic resin surfaces treated by glow discharge. The Journal of Prosthetic Dentistry 82: 680-684.
22. Park, Y.S., Chung, S.H., Kim, S.W. & Shon, W.J. (2012) Peri-implant bone formation and surface characteristics of rough surface zirconia implants manufactured by powder injection molding technique in rabbit tibiae. Clinical oral implants research, doi: 10.1111/j.1600-0501.2012.02468.x (Epub ahead of print).
23. Puleo, D.A., Kissling, R.A. & Sheu, M.S. (2002) A technique to immobilize bioactive proteins, including bone morphogenetic protein-4 (bmp-4), on titanium alloy. Biomaterials 23: 2079-2087.
24. Quere, D. (2008) Wetting and roughness. Annual Review of Materials Research 38: 71-99.
25. Ritts, A.C., Li, H., Yu, Q., Xu, C., Yao, X., Hong, L. & Wang, Y. (2010) Dentin surface treatment using a non-thermal argon plasma brush for interfacial bonding improvement in composite restoration. European Journal of Oral Sciences 118: 510-516.
26. Rupp, F., Scheideler, L., Eichler, M. & Geis-Gerstorfer, J. (2011) Wetting behavior of dental implants. The International Journal of Oral and Maxillofacial Implants 26: 1256-1266.
27. Scarano, A., Di Carlo, F., Quaranta, M. & Piattelli, A. (2003) Bone response to zirconia ceramic implants: an experimental study in rabbits. The Journal of Oral Implantology 29: 8-12.
28. Schliephake, H., Hefti, T., Schlottig, F., Gedet, P. & Staedt, H. (2010) Mechanical anchorage and peri-implant bone formation of surface-modified zirconia in minipigs. Journal of Clinical Periodontology 37: 818-828.
29. Sela, M.N., Badihi, L., Rosen, G., Steinberg, D. & Kohavi, D. (2007) Adsorption of human plasma proteins to modified titanium surfaces. Clinical Oral Implants Research 18: 630-638.
30. Shohet, J.L. (1991) Plasma-aided manufacturing. IEEE Transactions on Plasma Science 19: 725-733.
31. Song, J.H. (1995) The injection-monding of fine and ultra fine zirconia powders. Ceramics International 21: 325-333.
32. Strnad, J., Strnad, Z., Sestak, J., Urban, K. & Povysil, C. (2007) Bio-activated titanium surface utilizable for mimetic bone implantation in dentistry - Part III: surface characteristics and bone-implant contact formation. Journal of Physics and Chemistry of Solids 68: 841-845.
33. Tendero, C., Tixier, C., Tristant, P., Desmaison, J. & Leprince, P. (2006) Atmospheric pressure plasmas: a review. Spectrochimica Acta B-Atomic Spectroscopy 61: 2-30.
34. Yavirach, P., Chaijareenont, P., Boonyawan, D., Pattamapun, K., Tunma, S., Takahashi, H. & Arksornnukit, M. (2009) Effects of plasma treatment on the shear bond strength between fiber-reinforced composite posts and resin composite for core build-up. Dental Materials Journal 28: 686-692.
35. Zhao, G., Schwartz, Z., Wieland, M., Rupp, F., Geis-Gerstorfer, J., Cochran, D.L. & Boyan, B.D. (2005) High surface energy enhances cell response to titanium substrate microstructure. Journal of Biomedical Materials Research. Part A 74: 49-58.