An optimization method of the machining parameters in high-speed machining of stainless steel using coated carbide tool for best surface finish

International Journal of Advanced Manufacturing Technology

Volumn 58, Issue 1-4, 2012, Pages 81-91

  Hamdan, Ahmad ^a   Sarhan, Ahmed A D ^a   Hamdi, Mohd ^a  

^a UNIVERSITY OF MALAYA   (Malaysia)

Author keywords

Cutting; Force; High speed; Lubricant; Machining; Optimization; Roughness; Taguchi

Indexed keywords

COATED CARBIDE TOOLS; CUTTING FORCES; CUTTING MECHANISMS; CUTTING PROCESS; CUTTING SPEED; DEPTH OF CUT; FEED-RATES; FORCE; HIGH QUALITY; HIGH SPEED MACHINING; HIGH TEMPERATURE; HIGH-SPEED; KEY TECHNOLOGIES; MACHINING PARAMETERS; MANUFACTURING APPLICATIONS; OPTIMIZATION METHOD; OPTIMIZATION PROCESS; ORTHOGONAL ARRAY; RAPID TOOLING; RESPONSE ANALYSIS; SIGNAL TO NOISE; SURFACE FINISHES; TAGUCHI; TAGUCHI OPTIMIZATION METHOD;

ANALYSIS OF VARIANCE (ANOVA); CARBIDE TOOLS; CARBIDES; CUTTING; CUTTING TOOLS; LUBRICANTS; MACHINING; MACHINING CENTERS; MANUFACTURE; OPTIMIZATION; SPEED; STAINLESS STEEL; TAGUCHI METHODS;

SURFACE ROUGHNESS;

EID: 84855713419     PISSN: 02683768     EISSN: 14333015     Source Type: Journal    
DOI: 10.1007/s00170-011-3392-5     Document Type: Article

References (27)

1. Rama Kotaiah K, Srinivas J, Babu KJ, Srinivas K (2010) Prediction of optimal cutting states during inward turning: an experimental approach. Mater Manuf Processes 25(6) : 432-441, 1532-2475
2. Anthony Xavior M, Adithan M (2009) Determining the influence of cutting fluids on tool wear and surface roughness during turning of AISI 304 austenitic stainless steel. J Mater Process Technol 209:900-909
3. Dhar NR, Kamruzzaman M, Ahmed M (2006) Effect of minimum quantity lubrication (MQL) on tool wear and surface roughness in turning AISI-4340 steel. J Mater Process Technol 172:299-304 (Pubitemid 43227341)
4. Ezugwu EO, Bonney J, Fadare DA, Sales WF (2005) Machining of nickel-base, Inconel 718, alloy with ceramic tools under finishing conditions with various coolant supply pressures. J Mater Process Technol 162-163:609-614 (Pubitemid 40584444)
5. Isik Y (2007) Investigating the machinability of tool steels in turning operations. Mater Des 28:1417-1424 (Pubitemid 44849279)
6. Teicher U, Künanz K, Ghosh A, Chattopadhyay AB (2008) Performance of diamond and CBN single-layered grinding wheels in grinding titanium. Mater Manuf Processes 23(3) : 224-227, 1532-2475 (Pubitemid 351473921)
7. Noordin MY, Venkatesh VC, Chan CL, Abdullah A (2001) Performance evaluation of cemented carbide tools in turning AISI 1010 steel. J Mater Process Technol 116:16-21 (Pubitemid 32903883)
8. Zafer T, Sezgin Y (2004) Investigation of the cutting parameters depending on process sound during turning of AISI 304 austenitic stainless steel. Mater Des 25:507-513
9. Thepsonthi T, Hamdi M, Mitsui K (2009) Investigation into minimal-cutting-fluid application in high-speed milling of hardened steel using carbide mills. Int J Mach Tools Manuf 49:156-162
10. Sayit E, Aslantas K, Çiçek A (2009) Tool wear mechanism in interrupted cutting conditions. Mater Manuf Processes 24(4) : 476-483, 1532-2475
11. Klocke F, Einesblatter G (1997) Dry cutting. Annals CIRP 46:519-526
12. Ming C, Fanghong S, Haili W, Renwei Y, Zhenghong Q, Shuqiao Z (2003) Experimental research on the dynamic characteristics of the cutting temperature in the process of high-speed milling. J Mater Process Technol 138:468-471
13. Liu CS, Zhao B, Gao GF, Jiao F (2002) Research on the characteristics of the cutting force in the vibration cutting of a particle-reinforced metal matrix composites SiCp/Al. J Mater Process Technol 129:196-199
14. Da Silva MB, Wallbank J (1999) Cutting temperature: prediction and measurement methods-a review. J Mater Process Technol 88:195-202
15. Kundrák J, Mamalis AG, Gyáni K, Markopoulos A (2006) Environmentally friendly precision machining. Mater Manuf Processes 21(1) : 29-37, 1532-2475 (Pubitemid 43024400)
16. Kurniawan D, Yusof NM, Sharif S (2010) Hard machining of stainless steel using wiper coated carbide: tool life and surface integrity. Mater Manuf Processes 25(6) : 370-377, 1532-2475
17. Paulo Davim J, Sreejith PS, Silva J (2007) Turning of brasses using minimum quantity of lubricant (MQL) and flooded lubricant conditions. Mater Manuf Processes 22(1) : 45-50, 1532-2475 (Pubitemid 46013768)
18. Varadarajan AS, Philip PK, Ramamoorthy B (2002) Investigation on hard turning with minimal cutting fluid application (HTMF) and its comparison with dry and wet turning. Int J Mach Tools Manuf 42:193-200 (Pubitemid 33018901)
19. Ghani JA, Choudhury IA, Hassan HH (2004) Application of Taguchi method in the optimization of end milling. J Mater Process Technol 145:84-92
20. Abou-El-Hossein KA (2008) Cutting fluid efficiency in end milling of AISI stainless steel. Ind Lubric Tribol 60:115-120 (Pubitemid 351590978)
21. Gandarias A, de Luis Norberto Lopez L, Aizpitarte X, Lamikiz A (2008) Study of the performance of the turning and drilling of austenitic stainless steels using two coolant techniques. Int J Mach Mach Mater 3:1-17 (Pubitemid 351454506)
22. Taguchi G (1990) Introduction to quality engineering. Asian Productivity Organization, Tokyo
23. Zhang JZ, Chen JC, Kirby ED (2007) Surface roughness optimization in an end-milling operation using the Taguchi design method. J Mater Process Technol 184:233-239 (Pubitemid 46205257)
24. Park SH (1996) Robust design and analysis for quality engineering. Chapman & Hall, London
25. Phadke MS (1989) Quality engineering using robust design. Prentice Hall, Englewood Cliffs, NJ
26. Suresh Kumar Reddy N, Venkateswara Rao P (2005) Performance improvement of end milling using graphite as a solid lubricant. Mater Manuf Processes 20(4) : 673-686, 1532-2475 (Pubitemid 41084631)
27. Khan MMA, Dhar NR (2006) Performance evaluation of minimum quantity lubrication by vegetable oil in terms of cutting force, cutting zone temperature, tool wear, job dimension and surface finish in turning AISI-1060 steel. J Zhejiang University 7:1790-1799 (Pubitemid 44881940)