Development of anew spray/wall interaction model for diesel spray under PCCI-engine relevant conditions

Atomization and Sprays

Volumn 24, Issue 1, 2014, Pages 41-80

  Zhang, Yanzhi ^a   Jia, Ming ^a   Liu, Hong ^a   Xie, Maozhao ^a   Wang, Tianyou ^b   Zhou, Lei ^c  

^a DALIAN UNIVERSITY OF TECHNOLOGY   (China)

^b TIANJIN UNIVERSITY   (China)

^c TSINGHUA UNIVERSITY   (China)

Author keywords

Diesel spray; Injection timing; PCCI engines; Spray wall interaction model

Indexed keywords

DIESEL ENGINES; DROP FORMATION; FORECASTING; IGNITION; WETTING;

DIESEL SPRAY; HIGH INJECTION PRESSURES; INJECTION TIMING; INTERACTION MODEL; INTERACTION PROCESS; LOG-NORMAL DISTRIBUTION; NUMERICAL PREDICTIONS; PREMIXED CHARGE COMPRESSION IGNITION;

ENGINES;

EID: 84896121083     PISSN: 10445110     EISSN: None     Source Type: Journal    
DOI: 10.1615/AtomizSpr.2013008287     Document Type: Article

References (64)

1. Allen, R. F., The mechanics of splashing, J. Coll. Interface Sci., vol. 124, no. 1, pp. 309-316, 1988.
2. Allocca, L., Andreassi, L., and Ubertini, S., Evaluation of splash models with high-pressure diesel spray, SAE Paper no. 2006-01-1117, 2006.
3. Amsden, A., A block-structured KIVA program for engines with vertical or canted values, Los Alamos National Laboratory, Technical Report no. LA-13313-MS, 1997.
4. Andreassi, L., Ubertini, S., and Allocca, L., Experimental and numerical analysis of high pressure diesel spray-Wall interaction, Int. J. Multiphase Flow, vol. 33, no. 7, pp. 742-765, 2007. (Pubitemid 46874721)
5. Arcoumanis, C. and Chang, J.-C, Flow and heat transfer characteristics of impinging transient diesel sprays, SAE Paper no. 940678, 1994.
6. Bai, C. and Gosman, A., Development of methodology for spray impingement simulation, SAE Paper no. 950283, 1995.
7. Bai, C. X., Rusche, H., and Gosman, A. D., Modelling of gasoline spray impingement, Atomization Sprays, vol. 12, no. 1-3, pp. 1-27, 2002.
8. Cossali, G, Coghe, A., and Marengo, M., The impact of a single drop on a wetted solid surface, Exp. Fluids, vol. 22, no. 6, pp. 463-472, 1997.
9. Dec, J. E., Advanced compression-ignition engines-Understanding the in-cylinder processes, Proc. Combust. Inst, vol. 32, no. 2, pp. 2727-2742, 2009.
10. Diwakar, R. and Singh, S., Importance of spray-bowl interaction in a DI diesel engine operating under PCCI combustion mode, SAE Paper no. 2009-01-0711, 2009.
11. Drake, M. C, Fansler, T D., Solomon, A. S., and Szekely, G, Piston fuel films as a source of smoke and hydrocarbon emissions from a wall-controlled spark-ignited direct-injection engine, SAE Paper no. 2003-01-0547, 2003.
12. Fang, T, Coverdill, R., Lee, C, and White, R., Smokeless combustion within a small-bore HSDI diesel engine using a narrow angle injector, SAE Paper no. 2007-01-0203, 2007.
13. Fujimoto, H., Senda, J., Nagae, M., Hashimoto, A., Saito, M., and Katsura, N., Characteristics of a diesel spray impinging on a flat wall, Symp. on Diagnostics and Modeling of Combustion, in I. C. Engines, Kyoto, Japan, in Proc. COMODIA 90 Int., pp. 193-198, 1990.
14. Gahdiri, H., Raindrop Impact, Soil Splashing and Catering, PhD Thesis, University of Reading, England, UK, 1978.
15. Han, Z. and Reitz, R. D., Turbulence modeling of internal combustion engines using RNG κ-ε models, Combust. Sci. Technol., vol. 106, no. 4-6, pp. 267-295, 1995.
16. Han, Z. and Reitz, R. D., A temperature wall function formulation for variable-density turbulent flows with application to engine convective heat transfer modeling, Int. J. Heat Mass Transfer, vol. 40, no. 3, pp. 613-625, 1997.
17. Han, Z., Xu, Z., and Trigui, N., Spray/wall interaction models for multidimensional engine simulation, Int. J. Engine Res., vol. 1, no. 1, pp. 127-146, 2000.
18. Hiroyasu, H. and Kadota, T., Fuel droplet size distribution in diesel combustion chamber, SAE Paper no. 740715, 1974.
19. Jayaratne, O. and Mason, B., The coalescence and bouncing of water drops at an air/water interface, Proc. R. Soc. London, Ser. A, vol. 280, no. 1383, pp. 545-565, 1964.
20. Jia, M., Peng, Z., and Xie, M., Evaluation of breakup models and application to the mixture preparation process for diesel HCCI engines, SAE Paper no. 2008-01-0023, 2008a.
21. Jia, M., Peng, Z., Xie, M., and Stobart, R., Evaluation of spray/wall interaction models under the conditions related to diesel HCCI engines, SAE Paper no. 2008-01-1632, 2008b.
22. Jia, M., Peng, Z., and Xie, M., Numerical investigation of soot reduction potentials with diesel homogeneous charge compression ignition combustion by an improved phenomenological soot model, Proc. Inst. Mech. Eng., Part D (J. Automob. Eng.), vol. 223, no. 3, pp. 395-412, 2009.
23. Jia, M., Xie, M., Wang, T., and Peng, Z., The effect of injection timing and intake valve close timing on performance and emissions of diesel PCCI engine with a full engine cycle CFD simulation, Appl. Energy, vol. 88, no. 9, pp. 2967-2975, 2011.
24. Katsura, N., Saito, M., Senda, J., and Fujimoto, H., Characteristics of a diesel spray impinging on a flat wall, SAE Paper no. 890264, 1989.
25. Koci, C., Ra, Y., Krieger, R., and Andrie, M., Detailed unburned hydrocarbon investigations in a highly-dilute diesel low temperature combustion regime, SAE Paper no. 2009-01-0928, 2009.
26. Kokjohn, S., Hanson, R., Splitter, D., and Reitz, R., Fuel reactivity controlled compression ignition (RCCI): A pathway to controlled high-efficiency clean combustion, Int. J. Engine Res., vol. 12, no. 3, pp. 209-226, 2011.
27. Kong, S.-C., Drop/wall interaction criteria and their applications in diesel spray modeling, Atomization Sprays, vol. 17, no. 6, pp. 473-499, 2007. (Pubitemid 46699336)
28. Kong, S., Ra, Y., and Reitz, R., Performance of multi-dimensional models for simulating diesel premixed charge compression ignition engine combustion using low- and high-pressure injectors, Int. J. Eng. Res., vol. 6, no. 5, pp. 475-486, 2005. (Pubitemid 41563457)
29. Lee, S.-S., Investigation of two low emissions strategies for diesel engines: Premixed charge compression ignition (PCCI) and stoichiometric combustion, PhD Thesis, University of Wisconsin-Madison, 2007.
30. Lee, S. H. and Ryou, H. S., Development of a new spray/wall interaction model, Int. J. Multiphase Flow, vol. 26, no. 7, pp. 1209-1234, 2000. (Pubitemid 30334538)
31. Lee, S. and Reitz, R., Spray targeting to minimize soot and CO formation in premixed charge compression ignition (PCCI) combustion with a HSDI diesel engine, SAE Paper no. 2006-01-0918, 2006.
32. Levin, Z. and Hobbs, P. V., Splashing of water drops on solid and wetted surfaces: Hydrodynamics and charge separation, Philos. Trans. R. Soc. London, Ser. A, vol. 269, no. 1200, pp. 555-585, 1971.
33. Lindgren, R. and Denbratt, I., Influence of wall properties on the characteristics of a gasoline spray after wall impingement, SAE Paper no. 2004-01-1951, 2004.
34. Liu, Y.-D., Jia, M., Xie, M.-Z., and Pang, B., Enhancement on a skeletal kinetic model for primary reference fuel oxidation by using a semidecoupling methodology, Energy Fuels, vol. 26, no. 12, pp. 7069-7083, 2012.
35. Mohammadi, A., Kidoguchi, Y., and Miwa, K., Effect of injection parameters and wallimpingement on atomization and gas entrainment processes in diesel sprays, SAE Paper no. 2002-01-0497, 2002.
36. Moreira, A. L. N., Moita, A. S., and Panão, M. R., Advances and challenges in explaining fuel spray impingement: How much of single droplet impact research is useful?, Prog. Energy Combust. Sci., vol. 36, no. 5, pp. 554-580, 2010.
37. Mundo, C., Sommerfeld, M., and Tropea, C., Droplet-wall collisions: Experimental studies of the deformation and breakup process, Int. J. Multiphase Flow, vol. 21, no. 2, pp. 151-173, 1995.
38. Naber, J. and Reitz, R., Modeling engine spray/wall impingement, SAE Paper no. 880107, 1988.
39. Nordin, N., Complex Chemistry Modeling of Diesel Spray Combustion, PhD Thesis, Chalmers University of Technology, Gothenburg, Sweden, 2001.
40. O'Rourke, P. and Amsden, A., A particle numerical model for wall film dynamics in port-injected engines, SAE Paper no. 961961, 1996.
41. O'Rourke, P. and Amsden, A., A spray/wall interaction submodel for the KIVA-3 wall film model, SAE Paper no. 2000-01-0271, 2000.
42. Okude, K., Mori, K., Shiino, S., and Moriya, T., Premixed compression ignition (PCI) combustion for simultaneous reduction of NOx and soot in diesel engine, SAE Paper no. 2004-01-1907, 2004.
43. Park, S. W. and Lee, C. S., Macroscopic and microscopic characteristics of a fuel spray impinged on the wall, Exp. Fluids, vol. 37, no. 5, pp. 745-762, 2004.
44. Reitz, R. D., Modeling atomization processes in high-pressure vaporizing sprays, Atomization and Spray Technology, vol. 3, pp. 309-337, 1987.
45. Reitz, R. and Bracco, F., Mechanisms of breakup of round liquid jets, Encycl. Fluid Mech., vol. 3, pp. 233-249, 1986.
46. Ricart, L. M., Reltz, R. D., and Dec, J. E., Comparisons of diesel spray liquid penetration and vapor fuel distributions with in-cylinder optical measurements, J. Eng. Gas Turbines Power, vol. 122, no. 4, pp. 588-595, 2000.
47. Rodriguez, F. and Mesler, R., Some drops don't splash, J. Coll. Interface Sci., vol. 106, no. 2, pp. 347-352, 1985.
48. Roisman, I., Prunet-Foch, B. Tropea, C., and Vignes-Adler, M., Multiple drop impact onto a dry solid substrate, J. Coll. Interface Sci., vol. 256, no. 2, pp. 396-410, 2002. (Pubitemid 36268663)
49. Roisman, I. V., Horvat, K., and Tropea, C., Spray impact: Rim transverse instability initiating fingering and splash, and description of a secondary spray, Phys. Fluids, vol. 18, p. 102104, 2006.
50. Samenfink, W., Elsäßer, A., Dullenkopf, K., and Wittig, S., Droplet interaction with shear-driven liquid films: Analysis of deposition and secondary droplet characteristics, Int. J. Heat Fluid Flow, vol. 20, no. 5, pp. 462-469, 1999. (Pubitemid 29490289)
51. Sandquist, H., Lindgren, R., and Denbratt, I., Sources of hydrocarbon emissions from a direct injection stratified charge spark ignition engine, SAE Paper no. 2000-01-1906, 2000.
52. Senda, D. J., Iwashita, S., and Fujimoto, H., Modeling of diesel spray impingement on a flat wall, SAE Paper no. 941894, 1994.
53. Senda, J., Kanda, T., Al-Roub, M., Farrell, P. V., Fukami, T., and Fujimoto, H., Modeling spray impingement considering fuel film formation on the wall, SAE Paper no. 970047, 1997.
54. Senda, D. J., Higaki, T., Sagane, Y., and Fujimoto, H., Modeling and measurement on evaporation process of multicomponent fuels, SAE Paper no. 2000-01-0280, 2000.
55. Siewert, R., Spray angle and rail pressure study for low NOx diesel combustion, SAE Paper no. 2007-01-0122, 2007.
56. Stanton, D. and Rutland, C., Modeling fuel film formation and wall interaction in diesel engines, SAE Paper no. 960628, 1996.
57. Stevens, E. and Steeper, R., Piston wetting in an optical DISI engine: Fuel films, pool fires, and soot generation, SAE Paper no. 2001-01-1203, 2001.
58. Stow, C. and Stainer, R., The physical products of a splashing water drop, J. Meteorol. Soc. Jpn., vol. 55, pp. 518-532, 1977.
59. Stow, C. and Hadfield, M., An experimental investigation of fluid flow resulting from the impact of a water drop with an unyielding dry surface, Proc. R. Soc. London, Ser. A, vol. 373, no. 1755, pp. 419-441, 1981.
60. Wachters, L. and Westerling, N., The heat transfer from a hot wall to impinging water drops in the spheroidal state, Chem. Eng. Sci., vol. 21, no. 11, pp. 1047-1056, 1966.
61. Wang, A.-B., Chen, C.-C., and Hwang, W.-C., On some new aspects of splashing impact of dropliquid surface interactions, in Rein, M., Ed., Drop-Surface Interactions, Heidelberg: Springer, pp. 303-306, 2002.
62. Wu, Z.-N., Prediction of the size distribution of secondary ejected droplets by crown splashing of droplets impinging on a solid wall, Probab. Eng. Mech., vol. 18, no. 3, pp. 241-249, 2003.
63. Yao, M., Zheng, Z., and Liu, H., Progress and recent trends in homogeneous charge compression ignition (HCCI) engines, Prog. Energy Combust. Sci., vol. 35, no. 5, pp. 398-437, 2009.
64. Yarin, A. and Weiss, D., Impact of drops on solid surfaces: Self-similar capillary waves, and splashing as a new type of kinematic discontinuity, J. Fluid Mech., vol. 283, no. 1, pp. 141-173, 1995. (Pubitemid 26467852)