Evaluation of splash models with high-pressure diesel spray

SAE Technical Papers

Volumn , Issue , 2006, Pages

  Allocca, L ^a   Andreassi, L ^b   Ubertini, S ^b  

^a ISTITUTO MOTORI CNR   (Italy)

^b UNIVERSITY OF ROME TOR VERGATA   (Italy)

Author keywords

[No Author keywords available]

Indexed keywords

CCD CAMERAS; COMBUSTION; IMAGE PROCESSING; MIXTURES; PULSED LASERS; SPRAY NOZZLES; YTTRIUM ALUMINUM GARNET;

DIGITAL IMAGE PROCESSING SOFTWARE; EXPERIMENTAL INVESTIGATIONS; HIGH INJECTION PRESSURES; HIGH PRESSURE DIESEL SPRAYS; INJECTION PRESSURES; LOW INJECTION PRESSURE; MIXTURE PREPARATIONS; START OF INJECTIONS;

DIESEL ENGINES;

EID: 85072414713     PISSN: 01487191     EISSN: 26883627     Source Type: Journal    
DOI: 10.4271/2006-01-1117     Document Type: Conference Paper

References (36)

1. O'Rourke P.J., Amsden A.A., (1996). "A Particle Numerical Model for Wall Film Dynamics in Port-Injected Engines" SAE Technical Paper 961961
2. O'Rourke P.J., Amsden A.A., (2000). "A Spray/Wall Interaction Submodel for the KIVA-3V Wall Film Model" SAE Technical Paper 2000-01-0271
3. Bai C., Gosman A.D., (1995). "Development of Methodology for Spray Impingement Simulation" SAE Technical Paper 950283
4. Lee S., Ryou H.,. (2000). "Modeling of Spray-Wall Interactions Considering Liquid Film Formation" Proceedings of the Eight International Conference on Liquid Atomization and Spray Systems, Pasadena, CA, pp. 586-593
5. Lee S., Ko G.H., Ryou H., Hong K.B., (2001). "Development and Application of a New Spray Impingement Model Considering Film Formation in a Diesel Engine" KSME International Journal, Volume 15, No 7, pp. 951-961
6. Naber J.D., Reitz R.D., (1988). "Modeling engine/spray wall impingement" SAE Technical Paper 881316
7. Wachters L.H.J., Westerling N.A.J., (1966). "The heat transfer from a hot wall to impinging water drops in the spheroidal state" Chem. Eng. Sci., 21, 1047-1056
8. Eckause J.E., Reitz R.D., (1995). "Modeling heat transfer to impinging fuel sprays in direct-injection engines" Atomization and Sprays 5, 213-242
9. Guerrassi N., Champoussin J.C., (1996). "Experimental Study and Modeling of Diesel Spray/Wall Impingement" SAE Technical Paper 960864
10. Grover R.O. Jr., Assanis D.N., (2001). "A Spray Wall Impingement Model Based Upon Conservation Priciples" Comodia 2001
11. Cossali G., Coghe A., Marengo M., (1997). "The impact of a single drop on a wetted solid surface" Experiments in Fluids, Volume 22 pp. 463-472
12. Andreassi L., Ubertini S., (2005). "Multidimensional Modeling of Spray Impingement in Modern Diesel Engines" SAE Technical Paper 2005-24-092
13. Katsura N., Saito M., Senda J., Fujimoto H.,. (1989). "Characteristics of a Diesel spray impinging on a flat wall". SAE Technical Paper 890264
14. st Report, Measurements of Impinging Spray Characteristics) Transactions of Japanese Society Mechanical Engineering, Part B., Vol. 59, pp. 3290-3295
15. Fujimoto H., Senda J., Nagae M., Hashimoto A., Saito M., Katsura N., (1990). "Characteristics of a Diesel spray impinging on a flat wall" Proceedings of COMODIA 90 Int. Symposium on Diagnostic and Modeling of Combustion in I.C. Engines, Kyoto, Japan, pp. 193-198
16. Ubertini, S., Mariani, F., Postrioti, L., (2004). "Experimental Validation of a Spray Breakup Model in High Pressure Ambient Conditions" Selected papers from the THIESEL 2002, pp. 61-86, Springer Verlag Book.
17. Bella, G., Rocco, V., Ubertini, S., (2002). "Combustion and Spray Simulation of a DI Turbocharged Diesel Engine" Journal of Engines-SAE Transactions, vol. 2002, pp. 2549-2565.
18. Pontoppidan, M., Ausiello, F., Bella, G., and Ubertini, S., (2003). "Study of the Impact of the Combustion Process of Injector Nozzle Layout creating Enhancing Spray Secondary Break-up" SAE Technical Paper 2003-01-0706
19. Bella, G., Rotondi, R., Corcione, F., Valentino, G., (1999). "Experimental and Numerical Analysis of a Diesel Spray" Proceedings of ICE 1999.
20. Chaves, H., Knapp M., Kubitzek A., Obermeier F., (1995). "Experimental Study of Cavitation in the Nozzle Hole of Diesel Injectors Using Transparent Nozzles" SAE Technical Paper 950290.
21. Sarre, C. von K., Kong, S. C., Reitz, R. D., (1999). "Modeling the Effects of Injector Nozzle Geometry on Diesel Sprays" SAE Technical Paper 1999-01-0912
22. Hu, K., Gosman A.D., (1991). "A Phenomenological Model of Diesel Spray Atomization" Proc. of the International Conference on Multiphase Flows, Tsukuba, Japan.
23. Reitz, R.D., Diwakar, R., (1987). "Structure of High Pressure Fuel Sprays" SAE Technical Paper 870598.
24. O'Rourke, P. J., Amsden, A. A., (1987). "The Tab Method for Numerical Calculation of Spray Droplet Breakup" SAE Technical Paper 872089.
25. Ibrahim, E.A., Yang, H.Q., Przekwas, A. J., (1993). "Modeling of Spray Droplets Deformation and Breakup" AIAA J. Propulsion and Power, Volume 9, pp. 651-654. (Pubitemid 23691201)
26. Patterson, M. A., Reitz, R., (1998). "Modeling the Effects of Fuel Spray Characteristics on Diesel Engine Combustion and Emission" SAE Technical Paper 980131.
27. Mundo C., Sommerfeld M., Tropea C., (1995). "Droplet-wall collisions: experimental studies of the deformation and breakup process" International Journal of Multiphase Flow, Volume 21 (2), pp. 151-173
28. Naber, J.D., Farrel P.V., (1993). "Hydrodynamics of droplet impingement on a heated surface" SAE Technical. Paper 930919
29. Mutchler C.K., (1972) "Size, Travel and Composition of Droplets Formed by Waterdrop Splash on Thin Water Layers" Ph.D. thesis, Minnesota University, USA
30. Yarin A.L., Weiss D.A., (1995). "Impact of drops on solid surfaces: self-similar capillary waves, and splashing as a new type of kinematic discontinuity" Journal of Fluid Mechanics, Volume 283, pp. 141-173 (Pubitemid 26467852)
31. Nagaoka M., Kawazoe H., Nomura N., (1994). "Modeling Fuel Spray Impingement on a Hot Wall for Gasoline Engines" SAE Technical Paper 940525
32. O'Rourke P.J., Amsden A.A., (1996). "A Particle Numerical Model for Wall Film Dynamics in Port-Injected Engines" SAE Technical Paper 961961.
33. Allocca L., Amato U., Bertoli C., Corcione F.E., (1990). "Comparison of Models and Experiments for Diesel Fuel Sprays". Int. Symposium on Diagnostic and Modeling of Combustion in IC Engines, COMODIA-Kyoto, Japan (1990), pp. 225-261
34. De Vita A., Di Angelo L., Allocca L., (2002). "Early Injection and Time-Resolved Evolution of a Spray for GDI Engines" ASME Fluids Engineering Division Summer Meeting, Montreal, CANADA.
35. th Annual Conference on Liquid Atomization and Spray Systems, ILASS.
36. Di Stasio S., Allocca L., (2000). "Influence of the Gas Ambient Nature on Diesel Spray Properties at High Injection Pressure: Experimental Results" THIESEL.