Piezoelectric Energy Harvesting

Piezoelectric Energy Harvesting

Volumn , Issue , 2011, Pages

  Erturk, Alper ^a   Inman, Daniel J ^b  

^a GEORGIA INSTITUTE OF TECHNOLOGY   (United States)

^b Virginia Polytechnic Institute and State University   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84891584678     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1002/9781119991151     Document Type: Book

References (409)

1. Williams, C.B. and Yates, R.B. (1996) Analysis of a micro-electric generator for microsystems. Sensors and Actuators A, 52, 8-11.
2. Glynne-Jones, P., Tudor, M.J., Beeby, S.P., and White, N.M. (2004) An electromagnetic, vibration-powered generator for intelligent sensor systems. Sensors and Actuators A, 110, 344-349.
3. Arnold, D. (2007) Review of microscale magnetic power generation. IEEE Transactions on Magnetics, 43, 3940-3951.
4. Roundy, S., Wright, P., and Rabaey, J. (2003) Energy Scavenging for Wireless Sensor Networks, Kluwer Academic, Boston, MA.
5. Mitcheson, P., Miao, P., Start, B., Yeatman, E., Holmes, A., and Green, T. (2004) MEMS electrostatic micropower generator for low frequency operation. Sensors and Actuators A, 115, 523-529.
6. Roundy, S., Wright, P.K., and Rabaey, J.M. (2003) A study of low level vibrations as a power source for wireless sensor nodes. Computer Communications, 26, 1131-1144.
7. Jeon, Y.B., Sood, R., Jeong, J.H., and Kim, S. (2005) MEMS power generator with transverse mode thin film PZT. Sensors & Actuators A, 122, 16-22.
8. Wang, L. and Yuan, F.G. (2008) Vibration energy harvesting by magnetostrictive material. Smart Materials and Structures, 17, 045009.
9. Adly, A., Davino, D., Giustiniani, A., and Visone, C. (2010) Experimental tests of a magnetostrictive energy harvesting device towards its modeling. Journal of Applied Physics, 107, 09A935.
10. Koh, S.J.A., Zhao, X., and Suo, Z. (2009) Maximal energy that can be converted by a dielectric elastomer generator. Applied Physics Letters, 94, 262902.
11. Aureli, M., Prince, C., Porfiri, M., and Peterson, S.D. (2010) Energy harvesting from base excitation of ionic polymer metal composites in fluid environments. Smart Materials and Structures, 19, 015003.
12. Beeby, S.P., Tudor, M.J., and White, N.M. (2006) Energy harvesting vibration sources for microsystems applications. Measurement Science and Technology, 17, R175-R195.
13. Cook-Chennault, K.A., Thambi, N., and Sastry, A.M. (2008) Powering MEMS portable devices - a review of non-regenerative and regenerative power supply systems with emphasis on piezoelectric energy harvesting systems. Smart Materials and Structures, 17, 043001.
14. Sodano, H., Park, G., and Inman, D.J. (2004) A review of power harvesting from vibration using piezoelectric materials. Shock and Vibration Digest, 36, 197-205.
15. Anton, S.R. and Sodano, H.A. (2007) A review of power harvesting using piezoelectric materials (2003-2006). Smart Materials and Structures, 16, R1-R21.
16. Priya, S. (2007) Advances in energy harvesting using low profile piezoelectric transducers. Journal of Electroceramics, 19, 167-184.
17. Choi, W.J., Jeon, Y., Jeong, J.H., Sood, R., and Kim, S.G. (2006) Energy harvesting MEMS device based on thin film piezoelectric cantilevers. Journal of Electroceramics, 17, 543-548.
18. Feenstra, J., Granstrom, J., and Sodano, H. (2009) Energy harvesting through a backpack employing a mechanically amplified piezoelectric stack. Mechanical Systems and Signal Processing, 22, 721-734.
19. Kim, H.W., Batra, A., Priya, S., Uchino, K., Markley, D., Newnham, R.E., and Hofmann, H.F. (2004) Energy harvesting using a piezoelectric "cymbal" transducer in dynamic environment. Japanese Journal of Applied Physics, 43, 6178-6183.
20. Roundy, S. and Wright, P.K. (2004) A piezoelectric vibration based generator for wireless electronics. Smart Materials and Structures, 13, 1131-1144.
21. duToit, N.E.,Wardle, B.L., and Kim, S. (2005) Design considerations forMEMS-scale piezoelectric mechanical vibration energy harvesters. Journal of Integrated Ferroelectrics, 71, 121-160.
22. Sodano, H.A., Park, G., and Inman, D.J. (2004) Estimation of electric charge output for piezoelectric energy harvesting. Strain, 40, 49-58.
23. Lu, F., Lee, H.P., and Lim, S.P. (2004) Modeling and analysis of micro piezoelectric power generators for micro-electromechanical-systems applications. Smart Materials and Structures, 13, 57-63.
24. Chen, S.-N., Wang, G.-J., and Chien, M.-C. (2006) Analytical modeling of piezoelectric vibration-induced micro power generator. Mechatronics, 16, 397-387.
25. Lin, J.H., Wu, X.M., Ren, T.L., and Liu, L.T. (2007) Modeling and simulation of piezoelectric MEMS energy harvesting device. Integrated Ferroelectrics, 95, 128-141.
26. duToit, N.E. and Wardle, B.L. (2007) Experimental verification of models for microfabricated piezoelectric vibration energy harvesters. AIAA Journal, 45, 1126-1137.
27. Ajitsaria, J., Choe, S.Y., Shen, D., and Kim, D.J. (2007) Modeling and analysis of a bimorph piezoelectric cantilever beam for voltage generation. Smart Materials and Structures, 16, 447-454.
28. Ottman, G.K., Hofmann, H.F., Bhatt, A.C., and Lesieutre, G.A. (2002) Adaptive piezoelectric energy harvesting circuit for wireless remote power supply. IEEE Transactions on Power Electronics, 17, 669-676.
29. Ottman, G.K., Hofmann, H.F., and Lesieutre, G.A. (2003) Optimized piezoelectric energy harvesting circuit using step-down converter in discontinuous conduction mode. IEEE Transactions on Power Electronics, 18, 696-703.
30. Guyomar, D., Badel, A., Lefeuvre, E., and Richard, C. (2005) Toward energy harvesting using active materials and conversion improvement by nonlinear processing. IEEE Transactions of Ultrasonics, Ferroelectrics, and Frequency Control, 52, 584-595.
31. Guan,M.J. and Liao,W.H. (2007) On the efficiencies of piezoelectric energy harvesting circuits towards storage device voltages. Smart Materials and Structures, 16, 498-505.
32. Lefeuvre, E., Audigier, D., Richard, C., and Guyomar, D. (2007) Buck-boost converter for sensorless power optimization of piezoelectric energy harvester. IEEE Transactions on Power Electronics, 22, 2018-2025.
33. Shu, Y.C., Lien, I.C., and Wu, W.J. (2007) An improved analysis of the SSHI interface in piezoelectric energy harvesting. Smart Materials and Structures, 16, 2253-2264.
34. Kong, N., Ha, D.S., Erturk, A., and Inman, D.J. (2010) Resistive impedance matching circuit for piezoelectric energy harvesting. Journal of Intelligent Material Systems and Structures, 21, pp. 1293-1302.
35. Erturk, A., Anton, S.R., and Inman, D.J. (2009) Piezoelectric energy harvesting from multifunctional wing spars for UAVs - Part 1: coupled modeling and preliminary analysis. Proceedings of SPIE, 7288, 72880C.
36. Anton, S.R., Erturk, A., and Inman, D.J. (2009) Piezoelectric energy harvesting from multifunctional wing spars for UAVs - Part 2: experiments and storage applications. Proceedings of SPIE, 7288, 72880D.
37. Anton, S.R., Erturk, A.,Kong, N., Ha, D.S., and Inman, D.J. (2009) Self-charging structures using piezoceramics and thin-film batteries. Proceedings of the ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Oxnard, CA, September 20-24, 2009.
38. Anton, S.R., Erturk, A., and Inman, D.J. (2010) Multifunctional self-charging structures using piezoceramics and thin-film batteries. Smart Materials and Structures, 19, 115021.
39. Thomas, J.P. and Qidwai, M.A. (2005) The design and application of multifunctional structure-battery materials systems. Journal of Minerals, Metals and Materials Society, 57, 18-24.
40. Snyder, J.F.,Wong, E.L., and Hubbard, C.W. (2009) Evaluation of commercially available carbon fibers, fabrics, and papers for potential use in multifunctional energy storage applications. Journal of the Electrochemical Society, 156, A215-A224.
41. Anton, S.R., Erturk, A., and Inman, D.J. (2010) Strength analysis of piezoceramic materials for structural considerations in energy harvesting for UAVs. Proceedings of SPIE, 7643, 76430E.
42. Gambier, P., Anton, S.R.,Kong, N., Erturk, A., and Inman, D.J. (2010) Combined piezoelectric, solar and thermal energy harvesting for multifunctional structures with thin-film batteries. Proceedings of the 21st International Conference on Adaptive Structures and Technologies, State College, PA, October 4-6, 2010.
43. Standards Committee of the IEEE Ultrasonics, Ferroelectrics, and Frequency Control Society (1987) IEEE Standard on Piezoelectricity, IEEE, New York.
44. Meirovitch, L. (2001) Fundamentals of Vibrations, McGraw-Hill, New York.
45. Inman, D.J. (2007) Engineering Vibration, Prentice Hall, Englewood Cliffs, NJ.
46. Stephen, N.G. (2006) On energy harvesting from ambient vibration. Journal of Sound and Vibration, 293, 409-425.
47. Daqaq, F.M., Renno, J.M., Farmer, J.R., and Inman, D.J. (2007) Effects of system parameters and damping on an optimal vibration-based energy harvester. Proceedings of the 48th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Honolulu, Hawaii, April 23-26, 2007.
48. Erturk, A. and Inman, D.J. (2008) On mechanical modeling of cantilevered piezoelectric vibration energy harvesters. Journal of Intelligent Material Systems and Structures, 19, 1311-1325.
49. Hagood, N.W., Chung,W.H., and Von Flotow, A. (1990) Modelling of piezoelectric actuator dynamics for active structural control. Journal of Intelligent Material Systems and Structures, 1, 327-354.
50. Crandall, S.H., Karnopp, D.C., Kurtz, E.F. Jr., and Pridmore-Brown, D.C. (1968) Dynamics of Mechanical and Electromechanical Systems, McGraw-Hill, New York.
51. Erturk, A. and Inman, D.J. (2008) Issues in mathematical modeling of piezoelectric energy harvesters. Smart Materials and Structures, 17, 065016.
52. Erturk, A. and Inman, D.J. (2008) Adistributed parameter electromechanical model for cantilevered piezoelectric energy harvesters. ASME Journal of Vibration and Acoustics, 130, 041002.
53. Erturk, A. and Inman, D.J. (2009) An experimentally validated bimorph cantilever model for piezoelectric energy harvesting from base excitations. Smart Materials and Structures, 18, 025009.
54. Elvin, N.G. and Elvin, A.A. (2009) A general equivalent circuit model for piezoelectric generators. Journal of Intelligent Material Systems and Structures, 20, 3-9.
55. Rupp, C.J., Evgrafov, A., Maute, K., and Dunn, M.L. (2009) Design of piezoelectric energy harvesting systems: a topology optimization approach based on multilayer plates and shells. Journal of Intelligent Material Systems and Structures, 20, 1923-1939.
56. De Marqui, C. Jr., Erturk, A., and Inman, D.J. (2009) An electromechanical finite elementmodel for piezoelectric energy harvester plates. Journal of Sound and Vibration, 327, 9-25.
57. Elvin, N.G. and Elvin, A.A. (2009) A coupled finite element - circuit simulation model for analyzing piezoelectric energy generators. Journal of Intelligent Material Systems and Structures, 20, 587-595.
58. Yang, Y. and Tang, L. (2009) Equivalent circuit modeling of piezoelectric energy harvesters. Journal of Intelligent Material Systems and Structures, 20, 2223-2235.
59. Erturk, A., Hoffmann, J., and Inman, D.J. (2009) A piezomagnetoelastic structure for broadband vibration energy harvesting. Applied Physics Letters, 94, 254102.
60. Moon, F.C. and Holmes, P.J. (1979) A magnetoelastic strange attractor. Journal of Sound and Vibration, 65, 275-296.
61. Holmes, P. (1979) Anonlinear oscillator with a strange attractor. Philosophical Transactions of the Royal Society of London, Series A, 292, 419-449.
62. Duffing, G. (1918) Erzwungene Schwingungen bei Veränderlicher Eigenfrequenz und ihre technische Bedeutung, Vieweg, Braunschweig.
63. Nayfeh, A.H. and Mook, D.T. (1979) Nonlinear Oscillations, John Wiley & Sons, Inc., New York.
64. Guckenheimer, J. and Holmes, P. (1983) Nonlinear Oscillations, Dynamical Systems, and Bifurcations of Vector Fields, Springer-Verlag, New York.
65. Moon, F.C. (1987) Chaotic Vibrations, John Wiley & Sons, Inc., New York.
66. Stanton, S.C., McGehee, C.C., and Mann, B.P. (2009) Reversible hysteresis for broadband magnetopiezoelastic energy harvesting. Applied Physics Letters, 96, 174103.
67. Burrow, S.G., Clare, L.R., Carrella, A., and Barton, D. (2008) Vibration energy harvesters with non-linear compliance. Proceedings of SPIE, 6928, 692807.
68. Mann, B.P. and Sims, N.D. (2009) Energy harvesting from the nonlinear oscillations of magnetic levitation. Journal of Sound and Vibration, 319, 515-530.
69. Ramlan, R., Brennan, M.J., Mace, B.R., and Kovacic, I. (2009) Potential benefits of a non-linear stiffness in an energy harvesting device. Nonlinear Dynamics, 59, 545-558.
70. Gambier, P., Anton, S.R.,Kong, N., Erturk, A., and Inman, D.J. (2010) Combined piezoelectric, solar and thermal energy harvesting for multifunctional structures with thin-film batteries. Proceedings of the 21st International Conference on Adaptive Structures and Technologies, State College, PA, October 4-6, 2010.
71. Standards Committee of the IEEE Ultrasonics, Ferroelectrics, and Frequency Control Society (1987) IEEE Standard on Piezoelectricity, IEEE, New York.
72. Meirovitch, L. (2001) Fundamentals of Vibrations, McGraw-Hill, New York.
73. Inman, D.J. (2007) Engineering Vibration, Prentice Hall, Englewood Cliffs, NJ.
74. Stephen, N.G. (2006) On energy harvesting from ambient vibration. Journal of Sound and Vibration, 293, 409-425.
75. Daqaq, F.M., Renno, J.M., Farmer, J.R., and Inman, D.J. (2007) Effects of system parameters and damping on an optimal vibration-based energy harvester. Proceedings of the 48th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Honolulu, Hawaii, April 23-26, 2007.
76. Erturk, A. and Inman, D.J. (2008) On mechanical modeling of cantilevered piezoelectric vibration energy harvesters. Journal of Intelligent Material Systems and Structures, 19, 1311-1325.
77. Hagood, N.W., Chung,W.H., and Von Flotow, A. (1990) Modelling of piezoelectric actuator dynamics for active structural control. Journal of Intelligent Material Systems and Structures, 1, 327-354.
78. Crandall, S.H., Karnopp, D.C., Kurtz, E.F. Jr., and Pridmore-Brown, D.C. (1968) Dynamics of Mechanical and Electromechanical Systems, McGraw-Hill, New York.
79. Erturk, A. and Inman, D.J. (2008) Issues in mathematical modeling of piezoelectric energy harvesters. Smart Materials and Structures, 17, 065016.
80. Erturk,A. and Inman, D.J. (2008) Adistributed parameter electromechanical model for cantilevered piezoelectric energy harvesters. ASME Journal of Vibration and Acoustics, 130, 041002.
81. Erturk, A. and Inman, D.J. (2009) An experimentally validated bimorph cantilever model for piezoelectric energy harvesting from base excitations. Smart Materials and Structures, 18, 025009.
82. Elvin, N.G. and Elvin, A.A. (2009) A general equivalent circuit model for piezoelectric generators. Journal of Intelligent Material Systems and Structures, 20, 3-9.
83. Rupp, C.J., Evgrafov, A., Maute, K., and Dunn, M.L. (2009) Design of piezoelectric energy harvesting systems: a topology optimization approach based on multilayer plates and shells. Journal of Intelligent Material Systems and Structures, 20, 1923-1939.
84. De Marqui, C. Jr., Erturk, A., and Inman, D.J. (2009) An electromechanical finite elementmodel for piezoelectric energy harvester plates. Journal of Sound and Vibration, 327, 9-25.
85. Elvin, N.G. and Elvin, A.A. (2009) A coupled finite element - circuit simulation model for analyzing piezoelectric energy generators. Journal of Intelligent Material Systems and Structures, 20, 587-595.
86. Yang,Y. and Tang, L. (2009) Equivalent circuit modeling of piezoelectric energy harvesters. Journal of Intelligent Material Systems and Structures, 20, 2223-2235.
87. Erturk, A., Hoffmann, J., and Inman, D.J. (2009) A piezomagnetoelastic structure for broadband vibration energy harvesting. Applied Physics Letters, 94, 254102.
88. Moon, F.C. and Holmes, P.J. (1979) A magnetoelastic strange attractor. Journal of Sound and Vibration, 65, 275-296.
89. Holmes, P. (1979) Anonlinear oscillator with a strange attractor. Philosophical Transactions of the Royal Society of London, Series A, 292, 419-449.
90. Duffing, G. (1918) Erzwungene Schwingungen bei Veränderlicher Eigenfrequenz und ihre technische Bedeutung, Vieweg, Braunschweig.
91. Nayfeh, A.H. and Mook, D.T. (1979) Nonlinear Oscillations, John Wiley & Sons, Inc., New York.
92. Guckenheimer, J. and Holmes, P. (1983) Nonlinear Oscillations, Dynamical Systems, and Bifurcations of Vector Fields, Springer-Verlag, New York.
93. Moon, F.C. (1987) Chaotic Vibrations, John Wiley & Sons, Inc., New York.
94. Stanton, S.C., McGehee, C.C., and Mann, B.P. (2009) Reversible hysteresis for broadband magnetopiezoelastic energy harvesting. Applied Physics Letters, 96, 174103.
95. Burrow, S.G., Clare, L.R., Carrella, A., and Barton, D. (2008) Vibration energy harvesters with non-linear compliance. Proceedings of SPIE, 6928, 692807.
96. Mann, B.P. and Sims, N.D. (2009) Energy harvesting from the nonlinear oscillations of magnetic levitation. Journal of Sound and Vibration, 319, 515-530.
97. Ramlan, R., Brennan, M.J., Mace, B.R., and Kovacic, I. (2009) Potential benefits of a non-linear stiffness in an energy harvesting device. Nonlinear Dynamics, 59, 545-558.
98. Bryant,M. and Garcia, E. (2009) Energy harvesting: a key to wireless sensor nodes. Proceedings of SPIE, 7493, 74931W.
99. Peters, D.A., Karunamoorthy, S., and Cao,W.M. (1995) Finite state induced flowmodels; Part I; two dimensional thin airfoil. Journal of Aircraft, 32, 313-322.
100. Erturk, A., Vieira, W.G.R., Marqui, C. Jr., and Inman, D.J. (2010) On the energy harvesting potential of piezoaeroelastic systems. Applied Physics Letters, 96, 184103.
101. Theodorsen, T. (1935) General theory of aerodynamic instability and mechanism of flutter. Langley Memorial Aeronautical Laboratory, NACA-TR-496.
102. Priya, S., Chen, C.T., Fye, D., and Zahnd, J. (2005) Piezoelectric windmill: a novel solution to remote sensing. Japanese Journal of Applied Physics, 44, L104-L107.
103. St.Clair, D., Bibo, A., Sennakesavababu,V.R., Daqaq, M.F., and Li,G. (2010) Ascalable concept for micropower generation using flow-induced self-excited oscillations. Applied Physics Letters, 96, 144103.
104. Van Der Pol, B. (1920) A theory of the amplitude of free and forced triode vibrations. Radio Review, 1, 701-710, 754-762.
105. Robbins, W.P., Morris, D., Marusic, I., and Novak, T.O. (2006) Wind-generated electrical energy using flexible piezoelectric materials. Proceedings of ASME IMECE 2006, Chicago, IL, November 5-10.
106. Pobering, S., Ebermeyer, S., and Schwesinger, N. (2009) Generation of electrical energy using short piezoelectric cantilevers in flowing media. Proceedings of SPIE, 7288, 728807.
107. Akaydin, H.D., Elvin, N., and Andreopoulos, Y. (2010) Wake of a cylinder: a paradigm for energy harvesting with piezoelectric materials. Experiments in Fluids, 49, 291-304.
108. Akaydin, H.D., Elvin, N., and Andreopoulos, Y. (2010) Energy harvesting from highly unsteady fluid flows using piezoelectric materials. Journal of Intelligent Material Systems and Structures, 21, pp. 1263-1278.
109. Elvin, N.G. and Elvin, A.A. (2009) The flutter response of a piezoelectrically damped cantilever pipe. Journal of Intelligent Material Systems and Structures, 20, 2017-2026.
110. Lippmann, G. (1881) Principe de la conservation de l'electricité. Annales de chimie et de physique, 24, 145-178.
111. Voigt, W. (1910) Lehrbuch der Kristallphysik, Teubner, Leipzig.
112. Cady, W.G. (1946) Piezoelectricity: An Introduction to the Theory and Applications of Electromechanical Phenomena in Crystals, McGraw-Hill, New York.
113. Heising, R.A. (1946) Quartz Crystals for Electrical Circuits, Van Nostrand, New York.
114. Mason, W.P. (1950) Piezoelectric Crystals and Their Applications to Ultrasonics, Van Nostrand, New York.
115. Mindlin,R.D. (1961) On the equations of motion of piezoelectric crystals, In: Problems ofContinuum Mechanics, Society for Industrial and Applied Mathematics, Philadelphia, pp. 282-290.
116. Tiersten, H.F. and Mindlin, R.D. (1962) Forced vibrations of piezoelectric crystal plates. Quarterly Applied Mathematics, 20, 107-119.
117. Tiersten, H.F. (1969) Linear Piezoelectric Plate Vibrations, Plenum Press, New York.
118. Jeffreys, H. (1931) Cartesian Tensors, Cambridge University Press, New York.
119. Timoshenko, S., Young, D.H., and Weaver, W. (1974) Vibration Problems in Engineering, John Wiley & Sons, Inc., New York.
120. Meirovitch, L. (2001) Fundamentals of Vibrations, McGraw-Hill, New York.
121. Inman, D.J. (2007) Engineering Vibration, Prentice Hall, Englewood Cliffs, NJ.
122. Rao, S.S. (2007) Vibration of Continuous Systems, John Wiley & Sons, Inc., Hoboken, NJ.
123. Clough, R.W. and Penzien, J. (1975) Dynamics of Structures, John Wiley & Sons, Inc., New York.
124. Banks, H.T. and Inman , D.J. (1991) On damping mechanisms in beams. ASME Journal of Applied Mechanics, 58, 716-723.
125. Caughey, T.K. and O'Kelly, M.E.J. (1965) Classical normal modes in damped linear dynamic systems. ASME Journal of Applied Mechanics, 32, 583-588.
126. Ewins, D.J. (2000) Modal Testing: Theory, Practice and Application, Research Studies Press, Baldock, Hertfordshire.
127. Roundy, S. and Wright, P.K. (2004) A piezoelectric vibration based generator for wireless electronics. Smart Materials and Structures, 13, 1131-1144.
128. duToit, N.E.,Wardle, B.L., and Kim, S. (2005) Design considerations for MEMS-scale piezoelectric mechanical vibration energy harvesters. Journal of Integrated Ferroelectrics, 71, 121-160.
129. Stephen, N.G. (2006) On energy harvesting from ambient vibration. Journal of Sound and Vibration, 293, 409-425.
130. Daqaq, F.M., Renno, J.M., Farmer, J.R., and Inman, D.J. (2007) Effects of system parameters and damping on an optimal vibration-based energy harvester. Proceedings of the 48th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, April 23-26, Honolulu, Hawaii.
131. Jeon, Y.B., Sood, R., Jeong, J.H., and Kim, S. (2005) MEMS power generator with transverse mode thin film PZT. Sensors & Actuators A, 122, 16-22.
132. Fang, H.-B., Liu, J.-Q., Xu, Z.-Y., Dong, L., Chen, D., Cai, B.-C., and Liu, Y. (2006) AMEMS-based piezoelectric power generator for low frequency vibration energy harvesting. Chinese Physics Letters, 23, 732-734.
133. Williams, C.B. and Yates, R.B. (1996) Analysis of a micro-electric generator for microsystems. Sensors and Actuators A, 52, 8-11.
134. Strutt, J.W. (Lord Rayleigh) (1894) The Theory of Sound, Macmillan, London.
135. Banks, H.T., Luo, Z.H., Bergman, L.A., and Inman, D.J. (1998) On the existence of normal modes of damped discrete-continuous systems. ASME Journal of Applied Mechanics, 65, 980-989.
136. Newland, D.E. (1993) Random Vibrations, Spectral and Wavelet Analysis, John Wiley & Sons, Inc., New York.
137. Bendat, J.S. and Piersol, A.G. (1986) Random Data Analysis and Measurement Procedures, JohnWiley & Sons, Inc., New York.
138. Standards Committee of the IEEE Ultrasonics, Ferroelectrics, and Frequency Control Society (1987) IEEE Standard on Piezoelectricity, IEEE, New York.
139. Chopra, A.K. (2006) Dynamics of Structures: Theory and Applications to Earthquake Engineering, Prentice Hall, Englewood Cliffs, NJ.
140. Moro, L., Benasciutti, D., Brusa, E., and Zelenika, S. (2009) Caratterizzazione eperimentale di "Energy Scavengers" piezoelecttrici ottimizzati. AIAS XXXVIII Convengo Nazionale, Politecnico di Torino, 9-11 Septembre 2009.
141. Benasciutti, D., Moro, L., Zelenika, S., and Brusa, E. (2009) Vibration energy scavenging via piezoelectric bimorphs of optimized shapes. Microsystem Technologies, 16, 657-668.
142. Roundy, S., Wright, P., and Rabaey, J. (2003) Energy Scavenging for Wireless Sensor Networks, Kluwer Academic, Boston, MA.
143. Roundy, S., Wright, P.K., and Rabaey, J.M. (2003) A study of low level vibrations as a power source for wireless sensor nodes. Computer Communications, 26, 1131-1144.
144. Erturk, A. and Inman, D.J. (2009) An experimentally validated bimorph cantilever model for piezoelectric energy harvesting from base excitations. Smart Materials and Structures, 18, 025009.
145. Roundy, S., Wright, P., and Rabaey, J. (2003) Energy Scavenging for Wireless Sensor Networks, Kluwer Academic, Boston, MA.
146. Roundy, S., Wright, P.K., and Rabaey, J.M. (2003) A study of low level vibrations as a power source for wireless sensor nodes. Computer Communications, 26, 1131-1144.
147. Jeon, Y.B., Sood, R., Jeong, J.H., and Kim, S. (2005) MEMS power generator with transverse mode thin film PZT. Sensors & Actuators A, 122, 16-22.
148. Roundy, S. and Wright, P.K. (2004) A piezoelectric vibration based generator for wireless electronics. Smart Materials and Structures, 13, 1131-1144.
149. duToit, N.E.,Wardle, B.L., and Kim, S. (2005) Design considerations for MEMS-scale piezoelectric mechanical vibration energy harvesters. Journal of Integrated Ferroelectrics, 71, 121-160.
150. Sodano, H.A., Park, G., and Inman, D.J. (2004) Estimation of electric charge output for piezoelectric energy harvesting. Strain, 40, 49-58.
151. Lu, F., Lee, H.P., and Lim, S.P. (2004) Modeling and analysis of micro piezoelectric power generators for micro-electromechanical-systems applications. Smart Materials and Structures, 13, 57-63.
152. Chen, S.-N.,Wang, G.-J., and Chien,M.-C. (2006) Analytical modeling of piezoelectric vibration-induced micro power generator. Mechatronics, 16, 397-387.
153. Lin, J.H., Wu, X.M., Ren, T.L., and Liu, L.T. (2007) Modeling and simulation of piezoelectric MEMS energy harvesting device. Integrated Ferroelectrics, 95, 128-141.
154. duToit, N.E. and Wardle, B.L. (2007) Experimental verification of models for microfabricated piezoelectric vibration energy harvesters. AIAA Journal, 45, 1126-1137.
155. Ajitsaria, J., Choe, S.Y., Shen, D., and Kim, D.J. (2007) Modeling and analysis of a bimorph piezoelectric cantilever beam for voltage generation. Smart Materials and Structures, 16, 447-454.
156. Wang, Q.M. and Cross, L.E. (1999) Constitutive equations of symmetrical triple layer piezoelectric benders. IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 46, 1343-1351.
157. Sokolnikoff, I.S. (1946) Mathematical Theory of Elasticity, McGraw-Hill, New York.
158. Dym, C.L. and Shames, I.H. (1973) Solid Mechanics: A Variational Approach, McGraw-Hill, New York.
159. Banks, H.T., Luo, Z.H., Bergman, L.A., and Inman, D.J. (1998) On the existence of normal modes of damped discrete-continuous systems. ASME Journal of Applied Mechanics, 65, 980-989.
160. Hyer, M.W. (1998) Stress Analysis of Fiber-Reinforced Composite Materials, McGraw-Hill, New York.
161. Reddy, J.N. (2004) Mechanics of Laminated Composite Plates and Shells: Theory and Analysis, CRC Press, Boca Raton, FL.
162. Schwartz, L. (1978) Théorie des Distributions, Hermann, Paris.
163. Friedlander, F.G. (1998) Introduction to the Theory of Distributions, Cambridge University Press, Cambridge.
164. Meriam, J.L. and Kraige, L.G. (2001) Engineering Mechanics: Dynamics, John Wiley & Sons, Inc., New York.
165. Standards Committee of the IEEE Ultrasonics, Ferroelectrics, and Frequency Control Society (1987) IEEE Standard on Piezoelectricity, IEEE, New York.
166. Ottman, G.K., Hofmann, H.F., Bhatt, A.C., and Lesieutre, G.A. (2002) Adaptive piezoelectric energy harvesting circuit for wireless remote power supply. IEEE Transactions on Power Electronics, 17, 669-676.
167. Guyomar, D., Badel, A., Lefeuvre, E., and Richard, C. (2005) Toward energy harvesting using active materials and conversion improvement by nonlinear processing. IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 52, 584-595.
168. Guan, M.J. and Liao, W.H. (2007) On the efficiencies of piezoelectric energy harvesting circuits towards storage device voltages. Smart Materials and Structures, 16, 498-505.
169. Lefeuvre, E., Audigier, D., Richard, C., and Guyomar, D. (2007) Buck-boost converter for sensorless power optimization of piezoelectric energy harvester. IEEE Transactions on Power Electronics, 22, 2018-2025.
170. Shu, Y.C., Lien, I.C., and Wu, W.J. (2007) An improved analysis of the SSHI interface in piezoelectric energy harvesting. Smart Materials and Structures, 16, 2253-2264.
171. Kong, N., Ha, D.S., Erturk, A., and Inman, D.J. (2010) Resistive impedance matching circuit for piezoelectric energy harvesting. Journal of Intelligent Material Systems and Structures, 21, pp. 1293-1302.
172. Erturk, A., Tarazaga, P., Farmer, J.R., and Inman, D.J. (2009) Effect of strain nodes and electrode configuration on piezoelectric energy harvesting from cantilevered beams. ASME Journal of Vibration and Acoustics, 131, 011010.
173. Ewins, D.J. (2000) Modal Testing: Theory, Practice and Application, Research Studies Press, Baldock, Hertfordshire.
174. Banks, H.T. and Inman, D.J. (1991) On damping mechanisms in beams. ASME Journal of Applied Mechanics, 58, 716-723.
175. Lu, F., Lee, H.P., and Lim, S.P. (2004) Modeling and analysis of micro piezoelectric power generators for micro-electromechanical-systems applications. Smart Materials and Structures, 13, 57-63.
176. Chen, S.-N.,Wang, G.-J., and Chien,M.-C. (2006) Analytical modeling of piezoelectric vibration-induced micro power generator. Mechatronics, 16, 397-387.
177. Lin, J.H., Wu, X.M., Ren, T.L., and Liu, L.T. (2007) Modeling and simulation of piezoelectric MEMS energy harvesting device. Integrated Ferroelectrics, 95, 128-141.
178. Ajitsaria, J., Choe, S.Y., Shen, D., and Kim, D.J. (2007) Modeling and analysis of a bimorph piezoelectric cantilever beam for voltage generation. Smart Materials and Structures, 16, 447-454.
179. von Wagner, U. and Hagedorn, P. (2002) Piezo-beam systems subjected to weak electric field: experiments and modeling of nonlinearities. Journal of Sound and Vibration, 256, 861-872.
180. Stanton, S.C. and Mann, B.P. (2010) Nonlinear electromechanical dynamics of piezoelectric inertial generators: modeling, analysis, and experiment. Nonlinear Dynamics (in review).
181. Stanton, S.C., Erturk, A., Mann, B.P., and Inman, D.J. (2010) Nonlinear piezoelectricity in electroelastic energy harvesters: modeling and experimental identification. Journal of Applied Physics, 108, 074903.
182. Meirovitch, L. (2001) Fundamentals of Vibrations, McGraw-Hill, New York.
183. Hagood, N.W., Chung,W.H., and Von Flotow, A. (1990) Modelling of piezoelectric actuator dynamics for active structural control. Journal of Intelligent Material Systems and Structures, 1, 327-354.
184. Sodano, H.A., Park, G., and Inman, D.J. (2004) Estimation of electric charge output for piezoelectric energy harvesting. Strain, 40, 49-58.
185. duToit, N.E. and Wardle, B.L. (2007) Experimental verification of models for microfabricated piezoelectric vibration energy harvesters. AIAA Journal, 45, 1126-1137.
186. Erturk, A. and Inman, D.J. (2008) A distributed parameter electromechanical model for cantilevered piezoelectric energy harvesters. ASME Journal of Vibration and Acoustics, 130, 041002.
187. Elvin, N.G. and Elvin, A.A. (2009) A general equivalent circuit model for piezoelectric generators. Journal of Intelligent Material Systems and Structures, 20, 3-9.
188. Rupp, C.J., Evgrafov, A., Maute, K. and Dunn, M.L. (2009) Design of piezoelectric energy harvesting systems: a topology optimization approach based on multilayer plates and shells. Journal of Intelligent Material Systems and Structures, 20, 1923-1939.
189. De Marqui, C. Jr., Erturk, A., and Inman, D.J. (2009) An electromechanical finite element model for piezoelectric energy harvester plates. Journal of Sound and Vibration, 327, 9-25.
190. Benasciutti, D., Moro, L., Zelenika, S., and Brusa, E. (2009) Vibration energy scavenging via piezoelectric bimorphs of optimized shapes. Microsystem Technologies, 16, 657-668.
191. Elvin, N.G. and Elvin, A.A. (2009) A coupled finite element-circuit simulation model for analyzing piezoelectric energy generators. Journal of Intelligent Material Systems and Structures, 20, 587-595.
192. Yang, Y. and Tang, L. (2009) Equivalent circuit modeling of piezoelectric energy harvesters. Journal of Intelligent Material Systems and Structures, 20, 2223-2235.
193. Shahruz, M.D. (2006) Design of mechanical band-pass filters for energy scavenging. Journal of Sound and Vibration, 292, 987-998.
194. Shu, Y. C. and Lien, I. C. (2006) Analysis of power outputs for piezoelectric energy harvesting systems. Smart Materials and Structures, 15, 1499-1502.
195. Renno, J.M., Daqaq, F.M., and Inman, D.J. (2009) On the optimal energy harvesting from a vibration source. Journal of Sound and Vibration, 320, 386-405.
196. Fleming, J., Berhens, S., and Moheimani, S.O.R. (2000) Synthetic impedance for implementation of piezoelectric shunt-damping circuits. Electronics Letters, 36, 1525-1526.
197. Erturk, A. and Inman, D.J. (2009) An experimentally validated bimorph cantilever model for piezoelectric energy harvesting from base excitations. Smart Materials and Structures, 18, 025009.
198. Newland, D.E. (1993) Random Vibrations, Spectral and Wavelet Analysis, John Wiley & Sons, Inc., New York.
199. Bendat, J.S. and Piersol, A.G. (1986) Random Data Analysis and Measurement Procedures, JohnWiley & Sons, Inc., New York.
200. Lu, F., Lee, H.P., and Lim, S.P. (2004) Modeling and analysis of micro piezoelectric power generators for micro-electromechanical-systems applications. Smart Materials and Structures, 13, 57-63.
201. Chen, S.-N.,Wang, G.-J., and Chien,M.-C. (2006) Analytical modeling of piezoelectric vibration-induced micro power generator. Mechatronics, 16, 397-387.
202. Lin, J.H., Wu, X.M., Ren, T.L., and Liu, L.T. (2007) Modeling and simulation of piezoelectric MEMS energy harvesting device. Integrated Ferroelectrics, 95, 128-141.
203. Ajitsaria, J., Choe, S.Y., Shen, D., and Kim, D.J. (2007) Modeling and analysis of a bimorph piezoelectric cantilever beam for voltage generation. Smart Materials and Structures, 16, 447-454.
204. Meriam, J.L. and Kraige, L.G. (2001) Engineering Mechanics: Dynamics, John Wiley & Sons, Inc., New York.
205. Roundy, S., Wright, P.K., and Rabaey, J.M. (2003) A study of low level vibrations as a power source for wireless sensor nodes. Computer Communications, 26, 1131-1144.
206. duToit, N.E. and Wardle, B.L. (2007) Experimental verification of models for microfabricated piezoelectric vibration energy harvesters. AIAA Journal, 45, 1126-1137.
207. Kim, M., Hoegen, M., Dugundji, J., and Wardle, B.L. (2010) Modeling and experimental verification of proof mass effects on vibration energy harvester performance. Smart Materials and Structures, 19, 045023.
208. Stanton, S.C., Erturk, A., Mann, B.P., and Inman, D.J. (2010) Nonlinear piezoelectricity in electroelastic energy harvesters: modeling and experimental identification. Journal of Applied Physics, 108, 074903.
209. Stanton, S.C., Erturk, A., Mann, B.P., and Inman, D.J. (2010) Resonant manifestation of intrinsic nonlinearity within electroelastic micropower generators. Applied Physics Letters, 97, 254101.
210. duToit, N.E., Wardle, B.L., and Kim, S. (2005) Design considerations for MEMS-scale piezoelectric mechanical vibration energy harvesters. Journal of Integrated Ferroelectrics, 71, 121-160.
211. Kim, M., Hoegen, M., Dugundji, J., and Wardle, B.L. (2010) Modeling and experimental verification of proof mass effects on vibration energy harvester performance. Smart Materials and Structures, 19, 045023.
212. Renno, J.M., Daqaq, F.M., and Inman, D.J. (2009) On the optimal energy harvesting from a vibration source. Journal of Sound and Vibration, 320, 386-405.
213. Ewins, D.J. (2000) Modal Testing: Theory, Practice and Application, Research Studies Press, Baldock, Hertfordshire.
214. Clough, R.W. and Penzien, J. (1975) Dynamics of Structures, John Wiley & Sons, Inc., New York.
215. Lu, F., Lee, H.P., and Lim, S.P. (2004) Modeling and analysis of micro piezoelectric power generators for microelectromechanical-systems applications. Smart Materials and Structures, 13, 57-63.
216. Beeby, S.P., Tudor, M.J., and White, N.M. (2006) Energy harvesting vibration sources for microsystems applications. Measurement Science and Technology, 17, R175-R195.
217. Shu, Y.C. and Lien, I.C. (2006) Analysis of power outputs for piezoelectric energy harvesting systems. Smart Materials and Structures, 15, 1499-1502.
218. Meirovitch, L. (2001) Fundamentals of Vibrations, McGraw-Hill, New York.
219. Hagood, N.W., Chung,W.H., and Von Flotow, A. (1990) Modelling of piezoelectric actuator dynamics for active structural control. Journal of Intelligent Material Systems and Structures, 1, 327-354.
220. Sodano, H.A., Park, G., and Inman, D.J. (2004) Estimation of electric charge output for piezoelectric energy harvesting. Strain, 40, 49-58.
221. duToit, N.E. and Wardle, B.L. (2007) Experimental verification of models for microfabricated piezoelectric vibration energy harvesters. AIAA Journal, 45, 1126-1137.
222. Elvin, N.G. and Elvin, A.A. (2009) A general equivalent circuit model for piezoelectric generators. Journal of Intelligent Material Systems and Structures, 20, 3-9.
223. Erturk, A. and Inman, D.J. (2008) A distributed parameter electromechanical model for cantilevered piezoelectric energy harvesters. ASME Journal of Vibration and Acoustics, 130, 041002.
224. Dym, C.L. and Shames, I.H. (1973) Solid Mechanics: A Variational Approach, McGraw-Hill, New York.
225. Timoshenko, S.P. (1921) On the correction for shear of the differential equation for transverse vibrations of prismatic bars. Philosophical Magazine, 41, 744-746.
226. Timoshenko, S.P. (1922) On the transverse vibrations of bars of uniform cross-section. Philosophical Magazine, 43, 125-131.
227. Mindlin, R.D. (1951) Thickness-shear and flexural vibrations of crystal plates. Journal of Applied Physics, 22, 316-323.
228. Mindlin, R.D. (1952) Forced thickness-shear and flexural vibrations of piezoelectric crystal plates. Journal of Applied Physics, 23, 83-88.
229. Cowper, G.R. (1966) The shear coefficient in Timoshenko beam theory. ASME Journal of Applied Mechanics, 33, 335-340.
230. Kaneko, T. (1975) On Timoshenko's correction for shear in vibrating beams. Journal of Physics D: Applied Physics, 8, 1927-1936.
231. Stephen, N.G. (1978) On the variation of Timoshenko's shear coefficient with frequency. ASME Journal of Applied Mechanics, 45, 695-697.
232. Stephen, N.G. (1980) Timoshenko's shear coefficient from a beam subjected to gravity loading. ASME Journal of Applied Mechanics, 47, 121-127.
233. Stephen, N.G. and Hutchinson, J.R. (2001) Discussion: shear coefficients for Timoshenko beam theory. ASME Journal of Applied Mechanics, 68, 959-961.
234. Hutchinson, J.R. (2001) Shear coefficients for Timoshenko beam theory. ASME Journal of Applied Mechanics, 68, 87-92.
235. Puchegger, S., Bauer, S., Loidl, D., Kromp, K., and Peterlik, H. (2003) Experimental validation of the shear correction factor. Journal of Sound and Vibration, 261, 177-184.
236. Den Hartog, J.P. (1956) Mechanical Vibrations, McGraw-Hill, New York.
237. Lee, J. and Schultz,W.W. (2004) Eigenvalue analysis of Timoshenko beams and axisymmetric Mindlin plates by the pseudospectral method. Journal of Sound and Vibration, 269, 609-621.
238. Zhou, D. and Cheung, Y.K. (2001) Vibrations of tapered Timoshenko beams in terms of static Timoshenko beam functions. ASME Journal of Applied Mechanics, 68, 596-602.
239. Erturk, A., Anton, S.R., and Inman, D.J. (2009) Piezoelectric energy harvesting from multifunctional wing spars for UAVs - Part 1: coupled modeling and preliminary analysis. Proceedings of SPIE, 7288, 72880C.
240. Anton, S.R., Erturk, A., and Inman, D.J. (2009) Piezoelectric energy harvesting from multifunctional wing spars for UAVs - Part 2: experiments and storage applications. Proceedings of SPIE, 7288, 72880D.
241. Anton, S.R., Erturk, A., Kong, N., Ha, D.S., and Inman, D.J. (2009) Self-charging structures using piezoceramics and thin-film batteries. Proceedings of the ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Oxnard, CA, September 20-24, 2009.
242. Anton, S.R., Erturk, A., and Inman, D.J. (2010) Multifunctional self-charging structures using piezoceramics and thin-film batteries. Smart Materials and Structures, 19, 115021.
243. Benasciutti, D., Moro, L., Zelenika, S., and Brusa, E. (2009) Vibration energy scavenging via piezoelectric bimorphs of optimized shapes. Microsystem Technologies, 16, 657-668.
244. Yang, Y. and Tang, L. (2009) Equivalent circuit modeling of piezoelectric energy harvesters. Journal of Intelligent Material Systems and Structures, 20, 2223-2235.
245. Reddy, J.N. (1984) A simple higher-order theory for laminated composite plates. ASME Journal of Applied Mechanics, 51, 745-752.
246. Banks, H.T., Luo, Z.H., Bergman, L.A., and Inman, D.J. (1998) On the existence of normal modes of damped discrete-continuous systems. ASME Journal of Applied Mechanics, 65, 980-989.
247. Greenberg, M.D. (1998) Advanced Engineering Mathematics, Prentice Hall, Englewood Cliffs, NJ.
248. Newland, D.E. (1993) Random Vibrations, Spectral and Wavelet Analysis, John Wiley & Sons, Inc., New York.
249. Bendat, J.S. and Piersol, A.G. (1986) Random Data Analysis and Measurement Procedures, JohnWiley & Sons, Inc., New York.
250. Meirovitch, L. (2001) Fundamentals of Vibrations, McGraw-Hill, New York.
251. Inman, D.J. (2007) Engineering Vibration, Prentice Hall, Englewood Cliffs, NJ.
252. Timoshenko, S., Young, D.H., and Weaver, W. (1974) Vibration Problems in Engineering, John Wiley & Sons, Inc., New York.
253. Rao, S.S. (2007) Vibration of Continuous Systems, John Wiley & Sons, Inc., Hoboken, NJ.
254. Frýba, L. (1972) Vibration of Solids and Structures under Moving Loads, Noordhoff, Groningen.
255. Olsson, M. (1991) On the fundamental moving load problem. Journal of Sound and Vibration, 145, 299-307.
256. Gere, J.M. and Timoshenko, S.P. (1990) Mechanics of Materials, PWS-Kent, Boston, MA.
257. Beer, F.P., Johnston, E.R., and DeWolf, J.T. (2001) Mechanics of Materials, McGraw-Hill, New York.
258. Uicker, J.J., Pennock, G.R., and Shigley, J.E. (2003) Theory of Machines and Mechanisms, Oxford University Press, Oxford.
259. Erturk, A. and Inman, D.J. (2011) Piezoelectric power generation for civil infrastructure systems. Proceedings of the 18th SPIE Annual International Symposium on Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, San Diego, CA, March 6-10, 2011.
260. Scruggs, J.T. (2009) An optimal stochastic control theory for distributed energy harvesting networks. Journal of Sound and Vibration, 320, 707-725.
261. Seuaciuc-Osorio, T. and Daqaq, M.F. (2010) Energy harvesting under excitations of time-varying frequency. Journal of Sound and Vibration, 329, 2497-2515.
262. Adhikari, S., Friswell, M.I., and Inman, D.J. (2009) Piezoelectric energy harvesting from broadband random vibrations. Smart Materials and Structures, 18, 115005.
263. Daqaq, M.F. (2010) Response of uni-modal Duffing-type harvesters to random forced excitations. Journal of Sound and Vibration, 329, 3621-3631.
264. Nayfeh, A.H. (1981) Introduction to Perturbation Techniques, John Wiley & Sons, Inc., New York.
265. Triplett, A. and Quinn, D.D. (2009) The effect of non-linear piezoelectric coupling on vibration-based energy harvesting. Journal of Intelligent Material Systems and Structures, 20, 1959-1967.
266. Stanton, S.C., McGehee, C.C., and Mann, B.P. (2009) Reversible hysteresis for broadband magnetopiezoelastic energy harvesting. Applied Physics Letters, 96, 174103.
267. Daqaq, M.F., Stabler, C., Qaroush, Y., and Seuaciuc-Osorio, T. (2009) Investigation of power harvesting via parametric excitations. Journal of Intelligent Material Systems and Structures, 20, 545-557.
268. Nayfeh, A.H. and Mook, D.T. (1979) Nonlinear Oscillations, John Wiley & Sons, Inc., New York.
269. von Wagner, U. and Hagedorn, P. (2002) Piezo-beam systems subjected to weak electric field: experiments and modeling of nonlinearities. Journal of Sound and Vibration, 256, 861-872.
270. Stanton, S.C. and Mann, B.P. (2010) Nonlinear electromechanical dynamics of piezoelectric inertial generators: modeling, analysis, and experiment. Nonlinear Dynamics (in review).
271. Stanton, S.C., Erturk, A., Mann, B.P., and Inman, D.J. (2010) Nonlinear piezoelectricity in electroelastic energy harvesters: modeling and experimental identification. Journal of Applied Physics, 108, 074903.
272. Guckenheimer, J. and Holmes, P. (1983) Nonlinear Oscillations, Dynamical Systems, and Bifurcations of Vector Fields, Springer-Verlag, New York.
273. Moon, F.C. (1987) Chaotic Vibrations, John Wiley & Sons, Inc., New York.
274. Erturk, A., Hoffmann, J., and Inman, D.J. (2009) A piezomagnetoelastic structure for broadband vibration energy harvesting. Applied Physics Letters, 94, 254102.
275. Erturk, A. and Inman, D.J. (2010) Broadband piezoelectric power generation on high-energy orbits of the bistable Duffing oscillator with piezoelectric coupling. Journal of Sound and Vibration, doi:10.1016/j.jsv.2010.11.018.
276. Moon, F.C. and Holmes P.J. (1979) A magnetoelastic strange attractor. Journal of Sound and Vibration, 65, 275-296.
277. Poston, T. and Stewart, O. (1978) Catastrophe Theory and Its Applications, Pitman, London.
278. Holmes, P. (1979) A nonlinear oscillator with a strange attractor. Philosophical Transactions of the Royal Society of London, Series A, 292, 419-449.
279. Ottman, G.K., Hofmann, H.F., Bhatt, A.C., and Lesieutre, G.A. (2002) Adaptive piezoelectric energy harvesting circuit for wireless remote power supply. IEEE Transactions on Power Electronics, 17, 669-676.
280. Guyomar, D., Badel, A., Lefeuvre, E., and Richard, C. (2005) Toward energy harvesting using active materials and conversion improvement by nonlinear processing. IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 52, 584-595.
281. Guan, M.J. and Liao, W.H. (2007) On the efficiencies of piezoelectric energy harvesting circuits towards storage device voltages. Smart Materials and Structures, 16, 498-505.
282. Lefeuvre, E., Audigier, D., Richard, C., and Guyomar, D. (2007) Buck-boost converter for sensorless power optimization of piezoelectric energy harvester. IEEE Transactions on Power Electronics, 22, 2018-2025.
283. Shu, Y.C., Lien, I.C., and Wu, W.J. (2007) An improved analysis of the SSHI interface in piezoelectric energy harvesting. Smart Materials and Structures, 16, 2253-2264.
284. Kong, N., Ha, D.S., Erturk, A., and Inman, D.J. (2010) Resistive impedance matching circuit for piezoelectric energy harvesting. Journal of Intelligent Material Systems and Structures, 21, pp. 1293-1302.
285. Arrieta, A.F., Hagedorn, P., Erturk, A., and Inman, D.J. (2010) A piezoelectric bistable plate for nonlinear broadband energy harvesting. Applied Physics Letters, 97, 104102.
286. Hyer, M.W. (1981) Some observations on the cured shapes of thin unsymmetric laminates. Journal of Composite Materials, 15, 175-194.
287. Barton, D.A.W., Burrow, S.G., and Clare, L.R. (2010) Energy harvesting from vibrations with a nonlinear oscillator. ASME Journal of Vibration and Acoustics, 132, 021009.
288. Burrow, S.G., Clare, L.R., Carrella, A., and Barton, D. (2008) Vibration energy harvesters with non-linear compliance. Proceedings of SPIE, 6928, 692807.
289. Mann, B.P. and Sims, N.D. (2009) Energy harvesting from the nonlinear oscillations of magnetic levitation. Journal of Sound and Vibration, 319, 515-530.
290. Ramlan, R., Brennan, M.J., Mace, B.R., and Kovacic, I. (2009) Potential benefits of a non-linear stiffness in an energy harvesting device. Nonlinear Dynamics, 59, 545-558.
291. Daqaq, M.F. (2010) Response of uni-modal Duffing-type harvesters to random forced excitations. Journal of Sound and Vibration, 329, 3621-3631.
292. Cottone, F., Vocca, H., and Gammaitoni, L. (2009) Nonlinear energy harvesting. Physical Review Letters, 102, 080601.
293. Gammaitoni, L., Neri, I., and Vocca, H. (2009) Nonlinear oscillators for vibration energy harvesting. Applied Physics Letters, 94, 164102.
294. Benzi, R., Sutera, A., and Vulpiani, A. (1981) The mechanism of stochastic resonance. Journal of Physics A: Mathematical and General, 14, L453-L457.
295. Benzi, R., Parisi, G., Sutera, A., and Vulpiani, A. (1982) Stochastic resonance in climatic change. Tellus, 34, 10-16.
296. Gammaitoni, L., Hanggi, P., Jung, P., and Marchesoni, F. (1998) Stochastic resonance. Reviews of Modern Physics, 70, 223-287.
297. McInnes, C.R., Gorman, D.G., and Cartmell, M.P. (2008) Enhanced vibrational energy harvesting using nonlinear stochastic resonance. Journal of Sound and Vibration, 318, 655-662.
298. Stanton, S.C., McGehee, C.C., and Mann, B.P. (2010) Nonlinear dynamics for broadband energy harvesting: investigation of a bistable inertial generator. Physica D, 239, 640-653.
299. Litak, G., Friswell, M.I., and Adhikari, S. (2010) Magnetopiezoelastic energy harvesting driven by random excitations. Applied Physics Letters, 96, 214103.
300. Crawley, E. and Anderson, E. (1990) Detailed models for piezoelectric actuation of beams. Journal of Intelligent Material Systems and Structures, 1, 4-25.
301. Crawley, E. and Lazarus, K. (1991) Induced strain actuation of isotropic and anisotropic plates. AIAA Journal, 29, 944-951.
302. Roundy, S., Wright, P.K., and Rabaey, J.M. (2003) A study of low level vibrations as a power source for wireless sensor nodes. Computer Communications, 26, 1131-1144.
303. Standards Committee of the IEEE Ultrasonics, Ferroelectrics, and Frequency Control Society (1987) IEEE Standard on Piezoelectricity, IEEE, New York.
304. Bisplinghoff, R.L. and Ashley, H. (1962) Principles of Aeroelasticity, John Wiley & Sons, Inc., New York.
305. Fung, Y.C. (1969) Introduction to the Theory of Aeroelasticity, Dover, New York.
306. Dowell, E.H., Curtiss, H.C. Jr., Scalan, R.H., and Sisto, F. (1978) A Modern Course in Aeroelasticity, Sijthoff and Noordhoff, The Hagues.
307. Hodges, D.H. and Pierce, G.A. (2002) Introduction to Structural Dynamics and Aeroelasticity, Cambridge University Press, New York.
308. Erturk, A., Vieira, W.G.R, De Marqui, C. Jr., and Inman, D.J. (2010) On the energy harvesting potential of piezoaeroelastic systems. Applied Physics Letters, 96, 184103.
309. Theodorsen, T. (1935) General theory of aerodynamic instability and mechanism of flutter. Langley Memorial Aeronautical Laboratory, NACA-TR-496.
310. Agneni, A., Mastroddi, F., and Polli, G.M. (2003) Shunted piezoelectric patches in elastic and aeroelastic vibrations. Computers and Structures, 81, 91-105.
311. Dowell, E.H. and Tang, D. (2002) Nonlinear aeroelasticity and unsteady aerodynamics. AIAA Journal, 40, 1697-1707.
312. Dowell, E.H., Edwards, J., and Strganac, T. (2003) Nonlinear aeroelasticity. AIAA Journal of Aircraft, 40, 857-874.
313. Bryant, M. and Garcia, E. (2009) Development of an aeroelastic vibration power harvester. Proceedings of SPIE, 7288, 728812.
314. Bryant, M. and Garcia, E. (2009) Energy harvesting: a key to wireless sensor nodes. Proceedings of SPIE, 7493, 74931W.
315. Chen, Y.M. and Liu, J.K. (2010) Homotopy analysis method for limit cycle oscillations of an airfoil with cubic nonlinearities. Journal of Vibration and Control, 16, 163-179.
316. Conner, M.C., Tang, D.M., Dowell, E.H., and Virgin, L.N. (1997) Nonlinear behavior of a typical airfoil section with control surface freeplay: a numerical and experimental study. Journal of Fluids and Structures, 11, 89-109.
317. Meirovitch, L. (2001) Fundamentals of Vibrations, McGraw-Hill, New York.
318. Erturk, A. and Inman, D.J. (2010) Assumed-modes formulation of piezoelectric energy harvesters: Euler- Bernoulli, Rayleigh and Timoshenko models with axial deformations. Proceedings of the ASME ESDA 10th Biennial Conference on Engineering Systems, Design and Analysis, Istanbul, Turkey, July 12-14, 2010.
319. Erturk, A., Tarazaga, P., Farmer, J.R., and Inman, D.J. (2009) Effect of strain nodes and electrode configuration on piezoelectric energy harvesting from cantilevered beams. ASME Journal of Vibration and Acoustics, 131, 011010.
320. De Marqui, C. Jr., Erturk, A., and Inman, D.J. (2010) Piezoaeroelastic modeling and analysis of a generator wing with continuous and segmented electrodes. Journal of Intelligent Material Systems and Structures, 21, 983-993.
321. De Marqui, C. Jr., Erturk, A., and Inman, D.J. (2009) An electromechanical finite element model for piezoelectric energy harvester plates. Journal of Sound and Vibration, 327, 9-25.
322. De Marqui, C. Jr., Vieira, W.G.R., Erturk, A., and Inman, D.J. (2011) Modeling and analysis of piezoelectric energy harvesting from aeroelastic vibrations using the doublet-lattice method. ASME Journal of Vibration and Acoustics, 133, 011003.
323. Katz, J. and Plotkin, A. (2001) Low Speed Aerodynamics, Cambridge University Press, Cambridge.
324. Caughey, T.K. and O'Kelly, M.E.J. (1965) Classical normal modes in damped linear dynamic systems. ASME Journal of Applied Mechanics, 32, 583-588.
325. Albano, E. and Rodden, W. P. (1969) A doublet-lattice method for calculating lift distributions on oscillating surfaces in subsonic flow. AIAA Journal, 7, 279-285.
326. Hassig, H. J. (1971) An approximate true damping solution of the flutter equation by determinant iteration. Journal of Aircraft, 8, 885-889.
327. Erturk, A. and Inman, D.J. (2008) Issues in mathematical modeling of piezoelectric energy harvesters. Smart Materials and Structures, 17, 065016.
328. Priya, S., Chen, C.T., Fye, D., and Zahnd, J. (2005) Piezoelectric windmill: a novel solution to remote sensing. Japanese Journal of Applied Physics, 44, L104-L107.
329. De Melo Anicézio, M., De Marqui, Jr., C., Erturk, A., and Inman, D.J. (2011) Nonlinear modeling and analysis of a piezoaeroelastic energy harvester, Proceedings of the 14th International Symposium on Dynamic Problems of Mechanics, Sao Sebastiao, SP, Brazil, March 13-18 2011.
330. Erturk, A., Bilgen, O., Fontenille, M., and Inman, D.J. (2008) Piezoelectric energy harvesting from macro-fiber composites with an application to morphing wing aircraft. Proceedings of the 19th International Conference on Adaptive Structures and Technologies, Monte Verità, Ascona, Switzerland, October 6-9, 2008.
331. Peters, D.A., Karunamoorthy, S., and Cao,W.M. (1995) Finite state induced flow models, Part I: two dimensional thin airfoil. Journal of Aircraft, 32, 313-322.
332. Peng, Z. and Zhu, Q. (2009) Energy harvesting through flow-induced oscillations of a foil. Physics of Fluids, 21, 123602.
333. St. Clair, D., Bibo, A., Sennakesavababu, V.R., Daqaq, M.F., and Li, G. (2010) A scalable concept for micropower generation using flow-induced self-excited oscillations. Applied Physics Letters, 96, 144103.
334. Tang, L., Paidoussis, M., and Jiang, J. (2009) Cantilevered flexible plates in axial flow: energy transfer and the concept of flutter-mill. Journal of Sound and Vibration, 326, 263-276.
335. Kwon, S.D. (2010) A T-shaped piezoelectric cantilever for fluid energy harvesting. Applied Physics Letters, 97, 164102.
336. Robbins, W.P., Morris, D., Marusic, I., and Novak, T.O. (2006) Wind-generated electrical energy using flexible piezoelectric materials. Proceedings of ASME IMECE 2006, Chicago, IL, October 5-10, 2006.
337. Pobering, S., Ebermeyer, S., and Schwesinger, N. (2009) Generation of electrical energy using short piezoelectric cantilevers in flowing media. Proceedings of SPIE, 7288, 728807.
338. Akaydin, H.D., Elvin, N., and Andreopoulos, Y. (2010) Wake of a cylinder: a paradigm for energy harvesting with piezoelectric materials. Experiments in Fluids, 49, 291-304.
339. Akaydin, H.D., Elvin, N., and Andreopoulos, Y. (2010) Energy harvesting from highly unsteady fluid flows using piezoelectric materials. Journal of Intelligent Material Systems and Structures, 21, pp. 1263-1278.
340. von Kármán, T. (1963) Aerodynamics, McGraw-Hill, New York.
341. Allen, J.J. and Smits, A.J. (2001) Energy harvesting eel. Journal of Fluids and Structures, 15, 629-640.
342. Elvin, N.G. and Elvin, A.A. (2009) The flutter response of a piezoelectrically damped cantilever pipe. Journal of Intelligent Material Systems and Structures, 20, 2017-2026.
343. Engineering Fundamentals, Inc. (www.efunda.com).
344. Heinonen, E., Juuti, J., and Leppavuori, S. (2005) Characterization and modelling of 3D piezoelectric ceramic structures with ATILA software. Journal of European Ceramic Society, 25, 2467-2470.
345. Standards Committee of the IEEE Ultrasonics, Ferroelectrics, and Frequency Control Society (1987) IEEE Standard on Piezoelectricity, IEEE, New York.
346. Cao, H., Schmidt, V.H., Zhang, R., Cao, W., and Luo, H. (2004) Elastic, piezoelectric, and dielectric properties of 0.58Pb(Mg1/3Nb2/3)O3-0.42PbTiO3 single crystal. Journal of Applied Physics, 96, 549-554.
347. Erturk, A., Bilgen, O., and Inman, D.J. (2008) Power generation and shunt damping performance of a single crystal lead magnesium niobate - lead zirconate titanate unimorph: analysis and experiment. Applied Physics Letters, 93, 224102.
348. Ceracomp Co., Ltd. (www.ceracomp.com).
349. Morgan Technical Ceramics (www.morgantechnicalceramics.com).
350. Zhang, R., Lee, S.M., Kim, D.H., Lee, H.Y., and Shrout, T.R. (2008) Characterization of Mn-modified Pb(Mg1/3Nb2/3)O3-PbZrO3-PbTiO3 single crystals for high power broad bandwidth transducers. Applied Physics Letters, 93, 122908.
351. Anton, S.R., Erturk, A., and Inman, D.J. (2010) Strength analysis of piezoceramic materials for structural considerations in energy harvesting for UAVs. Proceedings of SPIE, 7643, 76430E.
352. Zhang, Q.M. and Zhao, J. (1999) Electromechanical properties of lead zirconate titanate piezoceramics under the influence of mechanical stresses. IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 46, 1518-1526.
353. Saito, Y., Takao, H. Tani, I., Nonoyama, T., Takatori, K., Homma, T., Nagaya, T., and Nakamura, M. (2004) Lead-free piezoceramics. Nature, 432, 84-87.
354. Shrout, T.R. and Zhang, S.J. (2007) Lead-free piezoelectric ceramics - alternatives for PZT?. Journal of Electroceramics, 19, 111-124.
355. Shu, Y.C. and Lien, I.C. (2006) Analysis of power outputs for piezoelectric energy harvesting systems. Smart Materials and Structures, 15, 1499-1502.
356. Ottman, G.K., Hofmann, H.F., Bhatt, A.C., and Lesieutre, G.A. (2002) Adaptive piezoelectric energy harvesting circuit for wireless remote power supply. IEEE Transactions on Power Electronics, 17, 669-676.
357. Guyomar, D., Badel, A., Lefeuvre, E., and Richard, C. (2005) Toward energy harvesting using active materials and conversion improvement by nonlinear processing. IEEE Transactions of Ultrasonics, Ferroelectrics, and Frequency Control, 52, 584-595.
358. Shu, Y.C., Lien, I.C., and Wu, W.J. (2007) An improved analysis of the SSHI interface in piezoelectric energy harvesting. Smart Materials and Structures, 16, 2253-2264.
359. Lefeuvre, E., Badel, A., Richard, C., and Guyomar, D. (2005) Piezoelectric energy harvesting device optimization by synchronous charge extraction. Journal of Intelligent Material Systems and Structures, 16, 865-876.
360. Ottman, G.K., Hofmann, H.F., and Lesieutre, G.A. (2003) Optimized piezoelectric energy harvesting circuit using step-down converter in discontinuous conduction mode. IEEE Transactions on Power Electronics, 18, 696-703.
361. Guan, M.J. and Liao, W.H. (2007) On the efficiencies of piezoelectric energy harvesting circuits towards storage device voltages. Smart Materials and Structures, 16, 498-505.
362. Kong, N., Ha, D.S., Erturk, A., and Inman, D.J. (2010) Resistive impedance matching circuit for piezoelectric energy harvesting. Journal of Intelligent Material Systems and Structures, 21. doi: 10.1177/1045389X09357971.
363. Lefeuvre, E., Audigier, D., Richard, C., and Guyomar, D. (2007) Buck-boost converter for sensorless power optimization of piezoelectric energy harvester. IEEE Transactions on Power Electronics, 22, 2018-2025.
364. Elvin, N.G. and Elvin, A.A. (2009) A general equivalent circuit model for piezoelectric generators. Journal of Intelligent Material Systems and Structures, 20, 3-9.
365. Erturk, A. and Inman, D.J. (2009) An experimentally validated bimorph cantilever model for piezoelectric energy harvesting from base excitations. Smart Materials and Structures, 18, 025009.
366. Erturk, A. and Inman, D.J. (2010) Assumed-modes formulation of piezoelectric energy harvesters: Euler-Bernoulli, Rayleigh and Timoshenko models with axial deformations. Proceedings of the ASME 2010 ESDA 10th Biennial Conference on Engineering Systems, Design and Analysis, Istanbul, Turkey, July 12-14, 2010.
367. Elvin, N.G. and Elvin, A.A. (2009) Acoupled finite element - circuit simulationmodel for analyzing piezoelectric energy generators. Journal of Intelligent Material Systems and Structures, 20, 587-595.
368. Yang, Y. and Tang, L. (2009) Equivalent circuit modeling of piezoelectric energy harvesters. Journal of Intelligent Material Systems and Structures, 20, 2223-2235.
369. Richard, C., Guyomar, D., Audigier, D., and Ching, G. (1998) Semi-passive damping using continuous switching of a piezoelectric device. Proceedings of the SPIE, 3672, 104-111.
370. Badel, A., Benayad, A., Lefeuvre, E., Leburn, L., Richard, C., and Guyomar, D. (2006) Single crystals and nonlinear process for outstanding vibration-powered electrical generators. IEEE Transactions of Ultrasonics, Ferroelectrics, and Frequency Control, 53, 673-684.
371. Badel, A., Guyomar, D., Lefeuvre, E., and Richard, C. (2005) Efficiency enhancement of a piezoelectric energy harvesting device in pulsed operation by synchronous charge inversion. Journal of Intelligent Material Systems and Structures, 16, 889-901.
372. Badel, A., Guyomar, D., Lefeuvre, E., and Richard, C. (2006) Piezoelectric energy harvesting using a synchronous switch technique. Journal of Intelligent Material Systems and Structures, 17, 831-839.
373. Lefeuvre, E., Badel, A., Richard, C., Petit, L., and Guyomar, D. (2006) A comparison between several vibrationpowered piezoelectric generators for standalone systems. Sensors and Actuators A, 126, 405-416.
374. Lallart, M. and Guyomar, D. (2008) An optimized self-powered switching circuit for non-linear energy harvesting with low voltage output. Smart Materials and Structures, 17, 035030.
375. Makihara, K., Onoda, J., and Miyakawa, T. (2006) Low energy dissipation electric circuit for energy harvesting. Smart Materials and Structures, 15, 1493-1498.
376. Wu, W.J., Wickenheiser, A.M., Reissman, T., and Garcia, E. (2009) Modeling and experimental verification of synchronized discharging techniques for boosting power harvesting from piezoelectric transducers. Smart Materials and Structures, 18, 055012.
377. Guan, M.J. and Liao, W.H. (2008) Characteristics of energy storage devices in piezoelectric energy harvesting systems. Journal of Intelligent Material Systems and Structures, 19, 671-679.
378. Lallart, M., Grabuio, L., Petit, L., Richard, C., and Guyomar, D. (2008) Double synchronized switch harvesting (DSSH): a new energy harvesting scheme for efficient energy extraction. IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 5, 2119-2130.
379. Shen, H., Qiu, J., Ji, H., Zhu, K., and Balsi, M. (2010) Enhanced synchronized switch harvesting: a new energy harvesting scheme for efficient energy extraction. Smart Materials and Structures, 19, 115017.
380. Lien, I.C., Shu, Y.C., Wu, W.J., Shiu, S.M., and Lin, H.C. (2010) Revisit of series-SSHI with comparisons to other interfacing circuits in piezoelectric energy harvesting, 19, 125009.
381. Standards Committee of the IEEE Ultrasonics, Ferroelectrics, and Frequency Control Society (1987) IEEE Standard on Piezoelectricity, IEEE, New York.
382. Timoshenko, S.P. (1921) On the correction for shear of the differential equation for transverse vibrations of prismatic bars. Philosophical Magazine, 41, 744-746.
383. Timoshenko, S.P. (1922) On the transverse vibrations of bars of uniform cross-section. Philosophical Magazine, 43, 125-131.
384. Mindlin, R.D. (1951) Thickness-shear and flexural vibrations of crystal plates. Journal of Applied Physics, 22, 316-323.
385. Mindlin, R.D. (1952) Forced thickness-shear and flexural vibrations of piezoelectric crystal plates. Journal of Applied Physics, 23, 83-88.
386. Cowper, G.R. (1966) The shear coefficient in Timoshenko beam theory. ASME Journal of Applied Mechanics, 33, 335-340.
387. Kaneko, T. (1975) On Timoshenko's correction for shear in vibrating beams. Journal of Physics D: Applied Physics, 8, 1927-1936.
388. Stephen, N.G. (1978) On the variation of Timoshenko's shear coefficient with frequency. ASME Journal of Applied Mechanics, 45, 695-697.
389. Stephen, N.G. (1980) Timoshenko's shear coefficient from a beam subjected to gravity loading. ASME Journal of Applied Mechanics, 47, 121-127.
390. Stephen, N.G. and Hutchinson, J.R. (2001) Discussion: shear coefficients for Timoshenko beam theory. ASME Journal of Applied Mechanics, 68, 959-961.
391. Hutchinson, J.R. (2001) Shear coefficients for Timoshenko beam theory. ASME Journal of Applied Mechanics, 68, 87-92.
392. Puchegger, S., Bauer, S., Loidl, D., Kromp, K., and Peterlik, H. (2003) Experimental validation of the shear correction factor. Journal of Sound and Vibration, 261, 177-184.
393. Timoshenko, S., Young, D.H., and Weaver, W. (1974) Vibration Problems in Engineering, John Wiley & Sons, Inc., New York.
394. Meirovitch, L. (2001) Fundamentals of Vibrations, McGraw-Hill, New York.
395. Meriam, J.L. and Kraige, L.G. (2001) Engineering Mechanics: Dynamics, John Wiley & Sons, Inc., New York.
396. Greenberg, M.D. (1998) Advanced Engineering Mathematics, Prentice Hall, Englewood Cliffs, NJ.
397. Erturk, A., Tarazaga, P., Farmer, J.R., and Inman, D.J. (2009) Effect of strain nodes and electrode configuration on piezoelectric energy harvesting from cantilevered beams. ASME Journal of Vibration and Acoustics, 131, 011010.
398. Cady, W.G. (1946) Piezoelectricity: An Introduction to the Theory and Applications of Electromechanical Phenomena in Crystals, McGraw-Hill, New York.
399. Kim, S., Clark, W.W., and Wang, Q.M. (2005) Piezoelectric energy harvesting with a clamped circular plate: analysis. Journal of Intelligent Material Systems and Structures, 16, 847-854.
400. Kim, S., Clark, W.W., and Wang, Q.M. (2005) Piezoelectric energy harvesting with a clamped circular plate: experimental study. Journal of Intelligent Material Systems and Structures, 16, 855-863.
401. Guan, M.J. and Liao, W.H. (2007) On the efficiencies of piezoelectric energy harvesting circuits towards storage device voltages. Smart Materials and Structures, 16, 498-505.
402. Lesieutre, G.A. and Davis, C.L. (1997) Can a coupling coefficient of a piezoelectric device be higher than those of its active material? Journal of Intelligent Material Systems and Structures, 8, 859-867.
403. Crawley, E.F. and de Luis, J. (1987) Use of piezoelectric actuators as elements of intelligent structures. AIAA Journal, 25, 1373-1385.
404. Engineering Fundamentals, Inc. www.efunda.com.
405. Heinonen, E., Juuti, J., and Leppavuori, S. (2005) Characterization and modelling of 3D piezoelectric ceramic structures with ATILA software. Journal of European Ceramic Society, 25, 2467-2470.
406. Standards Committee of the IEEE Ultrasonics, Ferroelectrics, and Frequency Control Society (1987) IEEE Standard on Piezoelectricity, IEEE, New York.
407. Sokolnikoff, I.S. (1946) Mathematical Theory of Elasticity, McGraw-Hill, New York.
408. Dym, C.L. and Shames, I.H. (1973) Solid Mechanics: A Variational Approach, McGraw-Hill, New York.
409. Meirovitch, L. (1970) Methods of Analytical Dynamics, McGraw-Hill, New York.