Strength analysis of piezoceramic materials for structural considerations in energy harvesting for UAVs

Proceedings of SPIE - The International Society for Optical Engineering

Volumn 7643, Issue PART 1, 2010, Pages

  Anton, S R ^a   Erturk, A ^b   Inman, D J ^a  

^a State University   (United States)

^b VIRGINIA POLYTECHNIC INSTITUTE AND STATE UNIVERSITY   (United States)

Author keywords

Bending strength; Energy harvesting; Multifunctional; Piezoceramic; Self charging; Unmanned aerial vehicles

Indexed keywords

ACTIVE DEVICES; AMBIENT VIBRATIONS; BENDING LOAD; DESIGN TOOL; HARVESTING DEVICES; HARVESTING SYSTEM; HOST STRUCTURE; LOAD BEARING; LOAD BEARING CAPABILITIES; MULTI-FUNCTIONAL DESIGN; MULTIFUNCTIONAL; PIEZO-CERAMICS; PIEZOCERAMIC; PIEZOCERAMIC LAYERS; PIEZOCERAMIC MATERIALS; PIEZOELECTRIC VIBRATION; PMN-PZT; PZT; RESEARCH COMMUNITIES; STRENGTH ANALYSIS; THREE-POINT BEND TEST; VIBRATION ENERGY HARVESTING;

BEARINGS (STRUCTURAL); BENDING STRENGTH; CONCRETE BRIDGES; HARVESTING; INTEGRATED CONTROL; PIEZOELECTRIC CERAMICS; PIEZOELECTRICITY; REMOTELY OPERATED VEHICLES; SINGLE CRYSTALS; UNMANNED AERIAL VEHICLES (UAV);

ENERGY HARVESTING;

EID: 77953523670     PISSN: 0277786X     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1117/12.847798     Document Type: Conference Paper

References (27)

1. Anton, S. R. and Sodano, H. A., "A review of power harvesting using piezoelectric materials (2003-2006)," Smart Materials and Structures, 16(3) R1-R21 (2007).
2. Beeby, S. P., Tudor, M. J. and White, N. M., "Energy harvesting vibration sources for microsystems applications," Measurement Science and Technology, (12) R175 (2006).
3. Cook-Chennault, K. A., Thambi, N. and Sastry, A. M., "Powering MEMS portable devices-a review of nonregenerative and regenerative power supply systems with special emphasis on piezoelectric energy harvesting systems," Smart Materials and Structures, 17(4) 043001 (33 pp.) (2008).
4. Priya, S., "Advances in energy harvesting using low profile piezoelectric transducers," Journal of Electroceramics, 19(1) 167-184 (2007).
5. Anton, S. R., Erturk, A. and Inman, D. J., "Piezoelectric energy harvesting from multifunctional wing spars for UAVs: Part 2. experiments and storage applications," in SPIE's 16th Annual International Symposium on Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring. San Diego, CA, USA, 7288, 72880D-12, (2009).
6. Anton, S. R., Erturk, A., Kong, N., Ha, D. S. and Inman, D. J., "Self-charging structures using piezoceramics and thin-film batteries," in ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems. Oxnard, CA, USA, SMASIS2009-1368, (2009).
7. Anton, S. R., Erturk, A., Kong, N., Ha, D. S. and Inman, D. J., "An investigation on multifunctional piezoelectric composite spars for energy harvesting in unmanned aerial vehicles," in 17th International Conference on Composite Materials. Edinburgh, UK, (2009).
8. Erturk, A., Anton, S. R. and Inman, D. J., "Piezoelectric energy harvesting from multifunctional wing spars for UAVs - Part 1: coupled modeling and preliminary analysis," in SPIE's 16th Annual International Symposium on Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring. San Diego, CA, USA, 7288, 72880C-15, (2009).
9. Cheng, J., Qian, C., Zhao, M., Lee, S. W. R., Tong, P. and Zhang, T.-Y., "Effects of electric fields on the bending behavior of PZT-5H piezoelectric laminates," Smart Materials and Structures, 9(6) 824-831 (2000).
10. Di, N. and Quesnel, D. J., "Photoelastic effects in Pb (Mg1/3Nb2/3) O 3-29%PbTiO3 single crystals investigated by three-point bending technique," Journal of Applied Physics, 101(4) 043522-43525 (2007).
11. Fett, T., Kamlah, M., Munz, D. and Thun, G., "Strength of a PZT ceramic under different test conditions," in SPIE's Smart Structures and Materials 2000 - Active Materials: Behavior and Mechanics. Newport Beach, CA, USA, 3992, 197-208, (2000).
12. Fett, T., Munz, D. and Thun, G., "Tensile and bending strength of piezoelectric ceramics," Journal of Materials Science Letters, 18(23) 1899-1902 (1999).
13. Fett, T., Munz, D. and Thun, G., "Bending strength of a PZT ceramic under electric fields," Journal of the European Ceramic Society, 23(2) 195-202 (2003).
14. Fu, R. and Zhang, T.-Y., "Influences of temperature and electric field on the bending strength of lead zirconate titanate ceramics," Acta Materialia, 48(8) 1729-1740 (2000).
15. Munz, D., Fett, T., Muller, S. and Thun, G., "Deformation and strength behaviour of a soft PZT ceramic," in SPIE's Smart Structures and Materials 1998 - Mathematics and Control in Smart Structures. San Diego, CA, USA, 3323, 84-95, (1998). (Pubitemid 35038837)
16. Narita, F., Shindo, Y. and Saito, F., "Cyclic fatigue crack growth in three-point bending PZT ceramics under electromechanical loading," Journal of the American Ceramic Society, 90(8) 2517-2524 (2007).
17. Okayasu, M., Ozeki, G. and Mizuno, M., "Fatigue failure characteristics of lead zirconate titanate piezoelectric ceramics," Journal of the European Ceramic Society, 30(3) 713-725 (2010).
18. Discenzo, F. M., Chung, D. and Loparo, K. A., "Pump condition monitoring using self-powered wireless sensors," Sound and Vibration, 40(5) 12-15 (2006).
19. Yoon, S.-H., Lee, Y.-H., Lee, S.-W. and Lee, C., "Energy-harvesting characteristics of PZT-5A under gunfire shock," Materials Letters, 62(21-22) 3632-3635 (2008).
20. Roundy, S. and Wright, P. K., "A piezoelectric vibration based generator for wireless electronics," Smart Materials and Structures, 13(5) 1131-1142 (2004).
21. Lee, H. Y., Zhang, S. J. and Shrout, T. R., "Development of high TC PMN-PZT piezoelectric single crystals by the solid-state crystal growth (SSCG) technique," in 17th IEEE International Symposium on the Applications of Ferroelectrics, 2008. 3, 1-2, (2008).
22. Zhang, S., Lee, S.-M., Kim, D.-H., Lee, H.-Y. and Shrout, T. R., "Temperature dependence of the dielectric, piezoelectric, and elastic constants for Pb(Mg[sub 1/3]Nb[sub 2/3])O[sub 3]-PbZrO[sub 3]-PbTiO[sub 3] piezocrystals," Journal of Applied Physics, 102(11) 114103-114105 (2007).
23. Erturk, A., Bilgen, O. and Inman, D. J., "Power generation and shunt damping performance of a single crystal lead magnesium niobate-lead zirconate titanate unimorph: Analysis and experiment," Applied Physics Letters, 93(22) 224102-224103 (2008).
24. Moon, S. E., Lee, S. Q., Lee, S.-k., Lee, Y.-G., Yang, Y. S., Park, K.-H. and Kim, J., "Sustainable Vibration Energy Harvesting Based on Zr-Doped PMN-PT Piezoelectric Single Crystal Cantilevers," ETRI Journal, 31(6) 688-694 (2009).
25. Sodano, H. A., Lloyd, J. and Inman, D. J., "An experimental comparison between several active composite actuators for power generation," Smart Materials and Structures, 15(5) 1211-1216 (2006).
26. ASTM C 1161-02c, "Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature," Annual Book of ASTM Standards, Vol.15.01, (2006).
27. ASTM C 1239-00, "Standard Practice for Reporting Uniaxial Strength Data and Estimating Weibull Distribution Parameters for Advanced Ceramics," Annual Book of ASTM Standards, Vol.15.01, (2006).