An electromechanical finite element model for piezoelectric energy harvester plates

Journal of Sound and Vibration

Volumn 327, Issue 1-2, 2009, Pages 9-25

  De Marqui Junior, Carlos ^a   Erturk, Alper ^b   Inman, Daniel J ^c  

^a UNIVERSITY OF SÃO PAULO   (Brazil)

^b VIRGINIA POLYTECHNIC INSTITUTE AND STATE UNIVERSITY   (United States)

^c State University   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ANALYTICAL RESULTS; ANALYTICAL SOLUTIONS; BEAMS AND PLATES; BIMORPH CANTILEVER; CONDUCTIVE ELECTRODES; DISTRIBUTED PARAMETER; ELECTRICAL ENERGY; ELECTRICAL POWER; ELECTRICAL POWER OUTPUT; ELECTROELASTIC BODIES; ELECTRONIC COMPONENT; ENERGY HARVESTING; FE MODEL; FINITE ELEMENT MODELS; FINITE ELEMENTS; HAMILTON'S PRINCIPLE; KIRCHHOFF PLATES; LUMPED PARAMETER; OPTIMIZATION PROBLEMS; PIEZO-CERAMICS; PIEZOCERAMIC LAYERS; PIEZOELECTRIC ENERGY; PLATE MODEL; PLATE-TYPE; POWER OUT PUT; RESEARCH FIELDS; THIN STRUCTURE; TIP MASS; UNIMORPH; UNMANNED AIR VEHICLES; VIBRATION ENERGIES; VIBRATION-BASED ENERGY HARVESTING;

ALUMINA; ASPECT RATIO; ATOMIC FORCE MICROSCOPY; AUTOMOBILE PARTS AND EQUIPMENT; COUPLED CIRCUITS; ELECTRIC POWER SUPPLIES TO APPARATUS; FINITE ELEMENT METHOD; HARVESTERS; HARVESTING; NANOCANTILEVERS; PIEZOELECTRIC TRANSDUCERS; PIEZOELECTRICITY; PLATES (STRUCTURAL COMPONENTS); REMOTELY OPERATED VEHICLES; UNMANNED AERIAL VEHICLES (UAV);

ENERGY CONVERSION;

EID: 68349144718     PISSN: 0022460X     EISSN: 10958568     Source Type: Journal    
DOI: 10.1016/j.jsv.2009.05.015     Document Type: Article

References (49)

1. Sodano H.A., Inman D.J., and Park G. A review of power harvesting from vibration using piezoelectric materials. The Shock and Vibration Digest 36 (2004) 197-205
2. Beeby S.P., Tudor M.J., and White N.M. Energy harvesting vibration sources for microsystems applications. Measurement Science and Technology 13 (2006) R175-R195
3. Priya S. Advances in energy harvesting using low profile piezoelectric transducers. Journal of Electroceramics 19 (2007) 167-184
4. Anton S.R., and Sodano H.A. A review of power harvesting using piezoelectric materials (2003-2006). Smart Materials and Structures 16 (2007) R1-R21
5. Cook-Chennault K.A., Thambi N., and Sastry A.M. Powering MEMS portable devices-a review of non-regenerative and regenerative power supply systems with emphasis on piezoelectric energy harvesting systems. Smart Materials and Structures 17 (2008) 043001 (33pp.)
6. S.R. Anton, D.J. Inman, Vibration energy harvesting for unmanned air vehicles, Smart Structures and Materials 2008: Active and Passive Smart Structures and Integrated Systems II, Proceedings of the SPIE, Vol. 6928, San Diego, CA, March 10-13, 2008.
7. K.C. Magoteaux, B. Sanders, H.A. Sodano, Investigation of energy harvesting small unmanned air vehicle, Smart Structures and Materials 2008: Active and Passive Smart Structures and Integrated Systems II, Proceedings of the SPIE, Vol. 6928, San Diego, CA, March 10-13, 2008.
8. Erturk A., Renno J.M., and Inman D.J. Modeling of piezoelectric energy harvesting from an L-shaped beam-mass structure with an application to UAVs. Journal of Intelligent Material Systems and Structures 20 (2009) 529-544
9. Roundy S., Wright P.K., and Rabaey J. A study of low level vibrations as a power source for wireless sensor nodes. Computer Communications 26 (2003) 1131-1144
10. Sodano H.A., Park G., and Inman D.J. Estimation of electric charge output for piezoelectric energy harvesting. Strain 40 (2004) 49-58
11. duToit N.E., and Wardle B.L. Experimental verification of models for microfabricated piezoelectric vibration energy harvesters. AIAA Journal 45 (2007) 1126-1137
12. Erturk A., Bilgen O., and Inman D.J. Power generation and shunt damping performance of a single crystal lead magnesium niobate-lead zirconate titanate unimorph: analysis and experiment. Applied Physics Letters 93 (2008) 224102 (3pp.)
13. Williams C.B., and Yates R.B. Analysis of a micro-electric generator for microsystems. Sensors and Actuators A 52 (1996) 8-11
14. Arnold D. Review of microscale magnetic power generation. IEEE Transactions on Magnetics 43 (2007) 3940-3951
15. Glynne-Jones P., Tudor M.J., Beeby S.P., and White N.M. An electromagnetic, vibration-powered generator for intelligent sensor systems. Sensors and Actuators A 110 (2004) 344-349
16. Beeby S.P., Torah R.N., Tudor M.J., Glynne-Jones P., O'Donnell T., Saha C.R., and Roy S. A micro electromagnetic generator for vibration energy harvesting. Journal of Micro-electromechanical Engineering 17 (2007) 1257-1265
17. Manna B.P., and Sims N.D. Energy harvesting from the nonlinear oscillations of magnetic levitation. Journal of Sound and Vibration 319 (2009) 515-530
18. S. Roundy, P.K. Wright, J. Rabaey, Micro-electrostatic vibration-to-electricity converters, Proceedings of the ASME 2002 International Mechanical Engineering Congress and Exposition, 2002.
19. Mitcheson P., Miao P., Start B., Yeatman E., Holmes A., and Green T. MEMS electrostatic micro-power generator for low frequency operation. Sensors and Actuators A 115 (2004) 523-529
20. duToit N.E., Wardle B.L., and Kim S.-G. Design considerations for MEMS-scale piezoelectric mechanical vibration energy harvesters. Integrated Ferroelectrics 71 (2005) 121-160
21. Chen S.-N., Wang G.-J., and Chien M.-C. Analytical modeling of piezoelectric vibration-induced micro power generator. Mechatronics 16 (2006) 379-387
22. Lin J.H., Wu X.M., Ren T.L., and Liu L.T. Modeling and simulation of piezoelectric MEMS energy harvesting device. Integrated Ferroelectrics 95 (2007) 128-141
23. Erturk A., and Inman D.J. Issues in mathematical modeling of piezoelectric energy harvesters. Smart Materials and Structures 17 (2008) 065016 (14pp.)
24. Erturk A., and Inman D.J. A distributed parameter electromechanical model for cantilevered piezoelectric energy harvesters. ASME Journal of Vibration and Acoustics 130 (2008) 041002 (15pp.)
25. Erturk A., and Inman D.J. An experimentally validated bimorph cantilever model for piezoelectric energy harvesting from base excitations. Smart Materials and Structures 18 (2009) 025009
26. Elvin N., and Elvin A. A general equivalent circuit model for piezoelectric generators. Journal of Intelligent Material Systems and Structures 20 (2009) 3-9
27. Stephen N.G. On energy harvesting from ambient vibration. Journal of Sound and Vibration 293 (2006) 409-425
28. Renno J.M., Daqaq M.F., and Inman D.J. On the optimal energy harvesting from a vibration source. Journal of Sound and Vibration 320 (2009) 386-405
29. Tzou H.S., and Tseng C.I. Distributed piezoelectric sensor/actuator design for dynamic measurement/control of distributed parameter systems: a piezoelectric finite element approach. Journal of Sound and Vibration 138 (1990) 17-34
30. Hwang W.S., and Park H.C. Finite element modeling of piezoelectric sensors and actuators. AIAA Journal 31 (1993) 930-937
31. Detwiler D.T., Shen M.-H.H., and Venkayya V.B. Finite element analysis of laminated composite structures containing distributed piezoelectric actuators and sensors. Finite Elements in Analysis and Design 20 (1995) 87-100
32. Chen S.H., Wang Z.D., and Liu X.H. Active vibration control and suppression for intelligent structures. Journal of Sound and Vibration 200 (1997) 167-177
33. Wang S.Y. A finite element model for the static and dynamic analysis of a piezoelectric bimorph. International Journal of Solids and Structures 41 (2004) 4075-4096
34. Ottman G.K., Hofmann H.F., Bhatt A.C., and Lesieutre G.A. Adaptive piezoelectric energy harvesting circuit for wireless remote power supply. IEEE Transactions on Power Electronics 17 (2002) 669-676
35. Guyomar D., Badel A., and Lefeuvre E. Toward energy harvesting using active materials and conversion improvement by nonlinear processing. IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control 52 (2005) 584-595
36. Shu Y.C., and Lien I.C. Analysis of power output for piezoelectric energy harvesting systems. Smart Materials and Structures 15 (2006) 1499-1512
37. Guan M.J., and Liao W.H. On the efficiencies of piezoelectric energy harvesting circuits towards storage device voltages. Smart Materials and Structures 16 (2007) 498-505
38. Crandall S.H., Karnopp D.C., Kurtz Jr. E.F., and Pridmore-Brown D.C. Dynamics of Mechanical and Electromechanical Systems (1968), McGraw-Hill, New York
39. Hagood N.W., Chung W.H., and Von Flotow A. Modelling of piezoelectric actuator dynamics for active structural control. Journal of Intelligent Material Systems and Structures 1 (1990) 327-354
40. IEEE Group on Sonics and Ultrasonics, IEEE Standard on Piezoelectricity, New York, 1978.
41. Bathe K.-J. Finite Element Procedures (1996), Prentice-Hall, Englewood Cliffs, NJ
42. Beer F.P., and Johnston Jr. E.R. Mechanics of Materials (1992), McGraw-Hill, New York
43. A.A. Bent, Piezoelectric Fiber Composites for Structural Actuation, PhD Thesis, Massachusetts Institute of Technology, 1994.
44. Wang Q.M., and Cross L.E. Constitutive equations of symmetrical triple layer piezoelectric benders. IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control 46 (1999) 1343-1351
45. 〈http://www.piezo.com/prodsheet1sq5A.html〉, Accessed December 2008.
46. 〈http://www.efunda.com/materials/piezo/material_data〉, Accessed December 2008.
47. Lesieutre G.A., Ottman G.K., and Hofmann H.F. Damping as a result of piezoelectric energy harvesting. Journal of Sound and Vibration 269 (2004) 991-1001
48. 〈http://asm.matweb.com/〉, Accessed December 2008.
49. 〈http://www.morganelectroceramics.com/〉, Accessed December 2008.