Surface modification of ABS by photocatalytic treatment for electroless copper plating

Journal of Adhesion Science and Technology

Volumn 28, Issue 5, 2014, Pages 499-511

  Zhao, Wenxia ^a,b   Ma, Qian ^a   Li, Lisha ^a   Li, Xirong ^a   Wang, Zenglin ^a  

^a BEIJING UNIVERSITY OF POSTS AND TELECOMMUNICATIONS   (China)

^b NINGXIA NORMAL UNIVERSITY   (China)

Author keywords

ABS resin; Adhesion strength; Electroless plating copper; Photocatalytic treatment

Indexed keywords

ACRYLONITRILE-BUTADIENE-STYRENE; ELECTROLESS COPPER PLATING; ENVIRONMENT FRIENDLY; ENVIRONMENTAL PROBLEMS; PHOTOCATALYTIC TREATMENT; SURFACE CHARACTERIZATION; SURFACE HYDROPHILICITY; WET CHEMICAL PROCESS;

ADHESION; BOND STRENGTH (MATERIALS); COLLOIDS; ELECTROLESS PLATING; HYDROPHILICITY; IRRADIATION; MANGANESE OXIDE; METALLIC FILMS; RESINS; STYRENE; SURFACE CHEMISTRY; SURFACE ROUGHNESS; TITANIUM DIOXIDE;

ABS RESINS;

EID: 84889884636     PISSN: 01694243     EISSN: 15685616     Source Type: Journal    
DOI: 10.1080/01694243.2013.845356     Document Type: Article

References (26)

1. Kulich DM. ABS resins. In: Kirk O, editor. Encyclopedia of chemical technology, vol. 1. New York (NY): Wiley; 1993. p. 391-411.
2. Corp GE. Metallization guide. Pittsfield (MA): GE Plastics; 1995.
3. McCaskie JE. A survey of mechanisms for adhering metal films to plastic surfaces. Plat. Plast. 2006;5: 31-39.
4. Wang GX, Li N, Hu HL, Yu YC. Process of direct copper plating on ABS plastics. Appl. Surf. Sci. 2006;253: 480-484.
5. Charbonnier M, Romand M. Polymer pretreatments for enhanced adhesion of metals deposited by the electroless process. Int. J. Adhes. Adhes. 2003;23: 277-285.
6. Yen PC. Improved ABS plastics activating treatment for electroless copper plating. Polymer. 1995;36: 3399-3400.
7. Bessho T, Yoshinaga F, Inoue K, Koiwa I, Honma H. Pretreatment of nickel plating on ASA resin using ozonated water as replacement for chromic acid etching. J. Surf. Finish. Soc. Jpn. 2006;57: 659-663.
8. Yang ZF, He Y, Li ZX, Li N, Wang ZL. Adhesion improvement of ABS resin to electroless copper by H2SO4-MnO2 colloid with ultrasound-assisted treatment. J. Adhes. Sci. Technol. 2011;25: 1211-1221.
9. Li ZX, Li N, Yin L, He Y, Wang ZL. An environment-friendly surface pretreatment of ABS resin prior to electroless plating. Electrochem. Solid-State Lett. 2009;12:D92-D95.
10. Wang ZL, Li ZX, He Y, Wang ZX. Study of an environmentally friendly surface etching system of ABS for improving adhesion of electroless Cu film. J. Electrochem. Soc. 2011;158:D664-D670.
11. Brewis DM. Adhesion to polymers: how important are weak boundary layers. Int. J. Adhes. Adhes. 1993;13: 251-256.
12. Abenojar J, Torregrosa-Coque R, Martínez MA, Martín- Martínez JM. Surface modifications of polycarbonate (PC) and acrylonitrile butadiene styrene (ABS) copolymer by treatment with atmospheric plasma. Surf. Coat. Technol. 2009;203: 2173-2180.
13. Sugimoto M, Tashiro K, Bessho T, Koiwa I, Honma H. Surface reforming of ABS resin using TiO2 under UV light irradiation. Surf. Finish. Soc. Jpn. 2006;57: 162-166.
14. Bessho T, Inoue K, Ishikawa K, Koiwa I, Honma H. Electroless copper plating on the insulating resin for build-up process using TiO2 as a photocatalyst. J. Surf. Finish. Soc. Jpn. 2006;57: 157-161.
15. Kim GG, Kang JA, Kim JH, Lee KY, Kim SJ, Kim SJ, Shin SH. Improved adhesion to ABS plastics by a photocatalytic reaction. Mater. Sci. Forum. 2007;75: 544-545.
16. Kim GG, Kang JA, Kim JH, Lee KY, Kim SJ, Kim SJ. Photocatalytic pretreatment of acrylonitrile- butadiene-styrene polymer for electroless plating. Scripta Mater. 2007;56: 349-351.
17. Magallón-Cacho L, Pérez-Bueno JJ, Meas-Vong Y, Stremsdoerfer G, Espinoza-Beltrán FJ. Surface modification of acrylonitrile-butadiene-styrene (ABS) with heterogeneous photocatalysis (TiO2) for the substitution of the etching stage in the electroless process. Surf. Coat. Technol. 2011;206: 1410-1415.
18. Jiang HY, Liu ZJ, Wang XW, Wang ZL. Effect of triethanolamine on deposition rate of electroless copper plating. Trans. Inst. Met. Finish. 2007;85: 103-106.
19. Wang ZL, Furaya A, Yasuda K, Ikeda H, Baba T, Hagiwara M, Toki S, Shigubara S, Kubota H, Ohmi T. Adhesion improvement of electroless copper to a polyimide film substrate by combining surface microroughening and imide ring cleavage. J. Adhes. Sci. Technol. 2002;16: 1027-1040.
20. Wang ZL, Yaegashi O, Sakaue H, Takahagi T, Shingubara S. Suppression of native oxide growth in sputtered TaN films and its application to Cu electroless plating. J. Appl. Phys. 2003;7: 4697-4701.
21. Chastain J, editor. Handbook of X-ray photoelectron spectroscopy. Eden Prairie (MN): Perkin- Elmer Corporation, Physical Electronics Division; 1992. p. 182-261.
22. Sakkas VA, Arabatzis IM, Konstantinou IK, Dimou AD, Albanis TA, Falaras P. Metolachlor photocatalytic degradation using TiO2 photocatalysts. Appl. Catal. B. 2004;49: 195-205.
23. Carp O, Huisman CL, Reller A. Photoinduced reactivity of titanium dioxide. Prog. Solid State Chem. 2004;32: 33-177.
24. Mathieson I, Bradley RH. Improved adhesion to polymers by UV/ozone surface oxidation. Int. J. Adhes. Adhes. 1996;16: 29-31.
25. Siau S, Vervaet A, Vaeck L, Schacht E, Demeter U, Calster AV. Adhesion strength of the epoxy polymer/copper interface for use in microelectronics. J. Electrochem. Soc. 2005;152: C442-C455.
26. Mittal KL, Pizzi A. Adhesion promotion techniques: techno. applications. New York: Marcel Dekker; 1999.