Personal Protective Equipment for Chemical, Biological, and Radiological Hazards: Design, Evaluation, and Selection

Personal Protective Equipment for Chemical, Biological, and Radiological Hazards: Design, Evaluation, and Selection

Volumn , Issue , 2012, Pages 1-331

  Gudgin Dickson, Eva F ^a  

^a Kingston ^*  (Canada)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84888708171     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1002/9781118422991     Document Type: Book

References (505)

1. Zajtchuk R., Bellamy, R.F. (Eds.) (1997). Textbook of Military Medicine, Part I, Medical Aspects of Chemical and Biological Warfare, Sidell F.R., Takafuji E.T., Franz, D.R. (Eds.). Washington, DC: Office of the Surgeon General, U.S. Department of the Army.
2. Hala J., Navratil J.D. (2003). Radioactivity, Ionizing Radiation, and Nuclear Energy, 2nd ed. Konvoj, Czech Republic.
3. Canadian Standards Association (2011). Standard for Protection of First Responders from Chemical, Biological, Radiological and Nuclear (CBRN) Events. CAN/CGSB/CSA Z1610-2011.
4. North Atlantic Treaty Organization (2011). Operational Requirements, Technical Specifications and Evaluation Criteria for CBRN Protective Clothing, Vol. 1. AEP-38 (Ed. 2). Brussels: Military Agency for Standardization. NATO/PfP unclassified.
5. North Atlantic Treaty Organization (2003). Allied Joint Doctrine for NBC. AJP3.8. Brussels: Military Agency for Standardization. NATO/PfP unclassified.
6. Vincent J.H. (2009). Aerosol exposure: concepts, criteria, standards and applications. J. Phys.: Conf. Ser. 151: 1-9.
7. Hinds W.C. (1999). Aerosol Technology. New York: Wiley.
8. United Nations (2011). Globally Harmonized System of Classification and Labeling of Chemicals (GHS), (4th ed.) ST/SG/AC.10/30/Rev.4.
9. Williams P., Wallace D., (1989). Unit 731: Japan's Secret Biological Warfare in World War II. New York: Free Press.
10. Health Canada, Population and Public Health Branch, Centre for Emergency Preparedness and Response (2004). Laboratory Biosafety Guidelines, 3rd ed.
11. Roy C.J., Milton D.K. (2004). Airborne transmission of communicable infection: the elusive pathway. N. Engl. J. Med. 350: 1701-1803.
12. Tellier R. (2006). Review of aerosol transmission of influenza A virus. Emerging Infecti. Dis. J. 12. Available at http://www.cdc.gov/ncidod/EID/vol12no11/06-0426.htm.
13. Nicas M., Nazaroff W.W., Hubbard A. (2005). Understanding the risk of secondary airborne infection: emission of respirable pathogens. J. Occup. Environ. Hyg. 2: 143-54.
14. Mitsakou C., Helmis C., Housiadas C. (2005). Eulerian modelling of lung deposition with sectional representation of aerosol dynamics. J. Aerosol Sci. 36: 75-94.
15. Centers for Disease Control and Prevention: Emergency Preparedness and Response. http://www.bt.cdc.gov/agent/agentlist-category.asp. Accessed Nov. 2011.
16. Nilsson A. (1970). Airborne transmission of smallpox. B. Med. J. 4:127.
17. Hammarlund E., Lewis M.W., Hansen S.G., Strelow L.I., Nelson J.A., Sexton G.J., Hanifin J.M., Slifka M.K. (2003). Duration of antiviral immunity after smallpox vaccination. Nat. Med. 9: 1131-1137.
18. Zimmerman P.D., Loeb C. (2004). Dirty bombs: the threat revisited. Center for Technology and National Security Policy-Defense Horizons, 38. Storming Media: A093224.
19. Andersson K.G., Mikkelson T., Astrup P., Thykier-Nielsen S., Jaconbsen L.H., Schou-Jensen L., Hoe S.C., Nielsen S.P. (2008). Estimation of health hazards resulting from a radiological terrorist attack in a city. Radiat. Prot. Dosim. 131: 297-307.
20. International Commission on Radiological Protection (2000). Guide for the practical application of the ICRP human respiratory tract model. Ann. ICRP, ICRP Supporting Guidance 3. Oxford, UK: Pergamon Press.
21. Bailey M.R., Ansoborlo E., Guilmette R.A., Paquet F. (2007). Updating the ICRP human respiratory tract model. Radiat. Prot. Dosim. 127: 31-34.
22. Zajtchuk R., Jenkins D.P., Bellamy R.F., Ingram V.M., Walker R.I., Ceveny T.J., (Eds.) (1989). Textbook of Military Medicine, Part I, Warfare, Weaponry, and the Casualty, Vol. 2, Medical Consequences of Nuclear Warfare. Washington DC: Office of the Surgeon General, U.S. Department of the Army.
23. International Atomic Energy Association (1997). Generic Assessment Procedures for Determining Protective Actions During a Reactor Accident. IAEA-TECDOC-955.
24. North Atlantic Treaty Organization (2001). Graduated Levels of NBC Threat and Associated Protection. STANAG 2984 (Ed. 5). Brussels: Military Agency for Standardization. NATO/PfP unclassified.
25. North Atlantic Treaty Organization (1995). Guidelines for Air and Ground Personnel Using Fixed and Transportable Collective Protection Facilities on Land. STANAG 2941. Brussels: Military Agency for Standardization. NATO unclassified.
26. Canadian Department of National Defence, Chief of Force Development (2009). The future security environment 2008-2030. Part 1. Current and Emerging Trends. http://www.cfd-cdf.forces.gc.ca/documents/publications/SignedEngFSE10Jul09eng.pdf.
27. North Atlantic Treaty Organization (2003). Nuclear, Biological and Chemical (NBC) Hazard Management Policy for NATO Forces. STANAG 2426 (Ed. 2). Brussels: Military Agency for Standardization. NATO unclassified.
28. North Atlantic Treaty Organization (1998). Nuclear, Biological and Chemical Reconnaissance. STANAG 2112. Brussels: Military Agency for Standardization. NATO unclassified.
29. North Atlantic Treaty Organization (2000). Handbook for the Sampling and Identification of Chemical Warfare Agents. AEP-10 Vol. 1 (Ed. 5). Brussels: Military Agency for Standardization. NATO/PfP unclassified.
30. North Atlantic Treaty Organization (2007). Concept of Operations of Medical Support in Nuclear, Biological and Chemical Environments. AMedP-7(D). Brussels: Military Agency for Standardization. NATO unclassified.
31. National Fire Protection Association (2002). Recommended Practice for Responding to Hazardous Materials Incidents. NFPA 471.
32. National Fire Protection Association (2008). Standard for Competence of Responders to Hazardous Materials/Weapons of Mass Destruction Incidents. NFPA 472.
33. Canadian Standards Association (2011). Selection, Use, and Care of Respirators. CSA Z94.4-11.
34. First Annual Report to the President and the Congress of the Advisory Panel to Assess Domestic Response Capabilities for Terrorism Involving Weapons of Mass Destruction I. Assessing the Threat (1999). http://www.rand.org/nsrd/terrpanel/terror.pdf.
35. Davis L.E., LaTourrette T., Mosher D.E., Davis L.M., Howell D.R. (2003). Individual Preparedness and Response to Chemical, Radiological, Nuclear, and Biological Terrorist Attacks. App. A. Rand Corporation MR1731. http://www.rand.org/pubs/monographreports/MR1731/MR1731.pref.pdf.
36. Areal Locations of Hazardous Atmospheres, designed by the U.S. Environmental Protection Agency.
37. Hazard Prediction and Assessment Capability (HPAC), designed by the U.S. Defense Threat Reduction Agency.
38. Chemical/Biological Agent Vapor, Liquid, and Solid Tracking, designed by the U.S. Naval Surface Warfare Center.
39. Linders M.J., van Beest C.A., Brasser P., Geers L.F., van't Hof G., Rumley-Van Gurp R.A., Sterkenburg R.P., van Swieten S.C., Zappey H.W., Hin A.R. (2004). Chemical Incident Simulator: A New Approach For Deriving Passive Defense Requirements. U.S. Pentagon Report A726944.
40. Second-Order Closure Integrated PUFF (SCIPUFF) Model, designed by Aeronautics Research Associates, Princeton, NJ.
41. Conjunction of Multizone Infiltration Specialists (COMIS) multizone air flow model. Described in: Allard F., Dorer V.B., Feustel H.E., et al. (1990). Fundamentals of the Multizone Air Flow Model: COMIS. Air Infiltration and Ventilation Centre Technical Note 29, May, 115 pp.
42. Porshnev A.I., Reshetin V.P. (1993). Numerical investigation of aerosols propagation and sedimentation in case of accidents at NPP. Inzh. Fizi. J. 64: 393-370.
43. Sullivan T.J., Ellis J.S., Foster C.S., Foster K.T., Baskett R.L., Nasstrom J.S., Schalk W.W. (1993). Atmospheric release advisory capability: real-time modeling of airborne hazardous materials. Bull. Am. Meteorol. Soc. 74:2343-2361.
44. Baklanov A., Sørensen J.H., Hoe S.C., Amstrup B. (2006). Urban meteorological modelling for nuclear emergency preparedness. J. Environ. Radioact. 85:154-170.
45. Päsler-Sauer J. (2000). Description of the Atmospheric Dispersion Model ATSTEP. RODOS (WG2)-TN(97)01, progress report of RODOS, July. http://www.rodos.fzk.de.
46. Miller C.W., Hively L.M. (1987). A review of validation studies for the Gaussian plume atmospheric dispersion model. Nucl. Saf. 28: 522-531.
47. Nasstrom J.S., Sugiyama G., Baskett R.L., Larsen S.C., Bradley M.M. (2007). The NARAC modeling and decision support system for radiological and nuclear emergency preparedness and response. Int. J. Emerg. Manage. 4: 524-550.
48. Mikkelsen T., Larsen S.E., Thykier-Nielsen S. (1984). Description of the Risø puff diffusion model. Nucl. Technol. 67: 56-64.
49. Gering F., Weiss W., Wirth E., Stapel R., Jacob P., Müller H., Pröhl G. (2004). Assessment and evaluation of the radiological situation in the late phase of a nuclear accident. Radiat. Prot. Dosim. 109: 25-29.
50. Harper F.T., Musolino S.V., Wente W.B. (2007). Realistic radiological dispersal device hazard boundaries and ramifications for early consequence management decisions. Health Phys. 93: 1-16.
51. Dombroski M.J., Fischbeck P.S. (2006). An integrated physical dispersion and behavioral response model for risk assessment of radiological dispersion device (RDD) events. Risk Anal. 26: 501-514.
52. Leone J.M., Nasstrom J.S., Maddix D.M., Larson D.J., Sugiyama G., Ermak D.L. (2001). Langrangian Operational Dispersion Integrator (LODI) User's Guide. ver. 1.0. Lawrence Livermore National Laboratory UCRL-AM-212798.
53. Reshetin V.P., Regens J.L. (2003). Simulation modeling of anthrax spore dispersion in a bioterrorism incident. Risk Anal., 23: 1135-1145.
54. Reshetin V.P., Regens D. (2004). Evaluation of malignant anthrax spore dispersion in high-rise buildings. J. Eng. Phys. Thermophys. 77: 1155-1166.
55. Kournikakis B., Walker M., Ho J., Duncan S. (2009). Statistical analysis of bacterial spore aerosols created by opening a spore containing "anthrax letter" in an office. J. Aerosol Sci. 40: 514-522.
56. Cantrell W.A., Nutter D. (2008). Factors affecting the spread of a bioterrorist agent throughout a building. Inquiry 9: 23-36.
57. Policastro A.J., Gordon S.P. (1999). The use of technology in preparing subway systems for chemical/biological terrorism. Proc. Commuter Rail/Rapid Transit Conference, Toronto, ON, Canada.
58. Lien F.-S., Ji H., Yee E., Kournikakis B. (2010). Prediction of aerosol hazards arising from the opening of an anthrax-tainted letter in an open office environment using computational fluid dynamics. J. Eng. Sci. Technol. 5: 302-331.
59. Sextro R.G., Lorenzetti D.M., Sohn M.D., Thatcher T.L. (2002). Modeling the spread of anthrax in building. Proc. 9th Int. Conf. on Indoor Air Quality and Climate Control 4: 506-511.
60. Isukapalli S.S., Lioy P. J., Georgopoulos, P.G. (2008). Mechanistic modeling of emergency events: assessing the impact of hypothetical releases of anthrax. Risk Anal. 28: 723-740.
61. Knudsen G.R. (1989). Model to predict aerial dispersal of bacteria during environmental release. Appl. Environ. Microbiol. 55: 2641-2647.
62. Nicas M. (2005). Use of a probabilistic infectious dose model for estimating airborne pathogen infection risk. J. Int. Soc. Respir. Prot. 22: 24-37.
63. Hathway A., Noakes C., Sleigh A. (2008). CFD Modeling of a hospital ward: assessing risk from bacteria produced from respiratory and activity sources. Indoor Air 2008, Copenhagen, Denmark.
64. Mazumdar S., Yin Y., Guity A., Marmion P., Gulick B., Chen Q. (2010). Impact of moving objects on contaminant concentration distributions in an inpatient ward with displacement ventilation. HVAC&R Res. 16: 545-563.
65. Holmes N.S., Morawska L. (2006). A review of dispersion modelling and its application to the dispersion of particles: an overview of different dispersion models available. Atmos. Environ. 40: 5902-5928.
66. Transport Canada (2012). Emergency Response Guidebook http://www.tc.gc.ca/media/documents/canutec-eng/ERG2012.pdf.
67. National Fire Protection Association (2008). Standard for Competence of Responders to Hazardous Materials/Weapons of Mass Destruction Incidents. NFPA 472-2008.
68. O'Rourke P.J. (1981). Collective Drop Effects on Vaporizing Liquid Sprays. Technical Report LA-9069-T. Los Alamos, NM: Los Alamos Laboratories.
69. Georgopoulos P.G., Fedele P., Shade P., Lioy P.J., Hodgson M., Longmire A., Sands M., Brown M.A. (2004). Hospital response to chemical terrorism: personal protective equipment, training and operations planning. Am. J. Ind. Med. 46: 432-445.
70. Korlie M.S. (2000). Three-dimensional computer simulation of liquid drop evaporation. Comput. & Math. Appli. 39: 43-52.
71. Eriksson L., Andersson P.L., Johansson E., Tysklind M. (2006). Megavariate analysis of environmental QSAR data: Part I. A basic framework founded on principal component analysis (PCA), partial least squares (PLS), and statistical molecular design (SMD). Mol. Divers. 10: 169-186.
72. Roy C.J., Hale M., Hartings J.M., Pitt L., Duniho S. (2003). Impact of inhalation exposure modality and particle size on the respiratory deposition of ricin in BALB/c mice. Inhal. Toxicol. 15: 619-638.
73. North Atlantic Treaty Organization (2006). Radiological Aerosol Challenge Levels. AC225/LG/7 D(2006) 0003. Brussels. NATO unclassified.
74. Salbu B. (2000). Source-related characteristics of radioactive particles: a review. Radiat. Prot. Dosim. 92: 49-54.
75. Fogh C.L., Byrne M.A., Roed J., Goddard A.J.H. (1997). Size specific indoor aerosol deposition measurements and derived I/O concentrations ratios. Atmos. Environ. 31: 2193-2203.
76. North Atlantic Treaty Organization (1990). Extreme Climatic Conditions and Derived Conditions for Use in Defining Design/Test Criteria for NATO Forces Materiel. STANAG 2895 (Ed. 1). Brussels: Military Agency for Standardization. NATO unclassified.
77. North Atlantic Treaty Organization (1991). Nuclear Survivability Criteria for Armed Forces Material and Installations. STANAG 4145. Brussels: Military Agency for Standardization. NATO/PfP unclassified.
78. Hayes A.W. (1984). Principles and Methods of Toxicology. New York: Raven Press.
79. Ottoboni M.A. (1997). Chronic Toxicity: The Dose Makes the Poison, 3rd ed. New York: International Thomson.
80. Darmer K.I., Kinkead E.R., DiPasquale L.C. (1972). Acute Toxicity in Rats and Mice Resulting from Exposure to HCl Gas and HCl Aerosol for 5 and 30 Minutes. Aerospace Medical Research Laboratory, U.S. Air Force, AMRL-TR-72-21.
81. Bollinger N. (2004). Respirator Selection Logic. Cincinatti, OH: U.S. Department of Health and Human Services Centers for Disease Control and Prevention, NIOSH.
82. Gudgin Dickson E.F. (2008). Estimates of percutaneous toxicity of sulphur mustard vapor suitable for use in protective equipment standards. J. Toxicol. Environ. Health A 71: 1382-1391.
83. Duncan E.J.S., Gudgin Dickson E.F., Fedele P.D., Nelson D. (2005). A model for prediction of probability of developing an adverse physiological symptom in individuals exposed to VX nerve agent. J. Med. CBR. Def. 3. http://www.jmedcbr.org/Issue0301/Dickson/Dickson0605.html.
84. North Atlantic Treaty Organization (2003). Assessment of Effects Levels of Classical Chemical Warfare Agents Applied to the Skin to Be Used in the Design of Protective Equipment. AEP-52. Brussels: Military Agency for Standardization. NATO unclassified.
85. Centers for Disease Control and Prevention Airborne Exposure Limits (1988). FR53 no. 50, pp. 8594-8597.
86. Centers for Disease Control and Prevention Airborne Exposure Limits (2003). FR 68 no. 196, pp. 58348-58351.
87. Centers for Disease Control and Prevention Airborne Exposure Limits (2004). FR 69 no. 85, pp. 24164-24168.
88. International Commission on Radiological Protection (1991). 1990 Recommendations of the ICRP. ICRP Publication 60. Ann. ICRP 21(1-3).
89. International Commission on Radiological Protection (1991). Principles for Intervention for Protection of the Public in a Radiological Emergency. ICRP Publication 63. Ann. ICRP 22(4).
90. Institute of Medicine, U.S. National Academy of Science (1997). An Evaluation of Radiation Exposure Guidance for Military Operations, Interim Report. Washington, DC: National Academy Press.
91. North Atlantic Treaty Organization (2003). Commander's Guide on Nuclear Radiation Exposure of Groups. (Ed. 6), STANAG 2083. Brussels: Military Agency for Standardization. NATO/PfP unclassified.
92. North Atlantic Treaty Organization (2004). Commander's Guide on Low Level Radiation (LLR) Exposure in Military Operations, STANAG 2473 (Ed. 2). Brussels: Military Agency for Standardization. NATO/PfP unclassified.
93. International Commission on Radiological Protection (1991). ICRP Publication 60:1990 Recommendations of the International Commission on Radiological Protection-Users' Edition. Ann. ICRP 21(1-3).
94. U.S. Army Medical Research Institute of Infectious Disease (2005). USAMRIID's Medical Management of Biological Casualties, 6th ed. Fort Detrick, MD.
95. Feeley J.C., Patton C.M. (1980). Bacillus. In: Lennette E.H., Balows A.W. (Eds.), Manual of Clinical Microbiology 3rd ed. Washington, DC: American Society for Microbiology, pp. 145-149.
96. Jones R.M., Nicas M., Hubbard A, Sylvester M.D., Reingold A. (2005). The infectious dose of Francisella tularensis (tularemia). Appl. Biosaf. 10: 227-239.
97. LaTourette T., Peterson D.J., Bartis J.T., Jackson B.A., Houser A. (2003). Protecting Emergency Responders, Vol. 2, Community Views of Safety and Health Risks and Personal Protection Needs. Santa Monica, CA: Rand Science and Technology Policy Institute.
98. Dickson E. (2009). Minimizing risk to self and others. CBRNE Coroner's Workshop, Burnaby, BC, Canada, Jan. 2009.
99. DiChiara A., Addonizio, M. (2007). Law Enforcement Advanced Protection (LEAP) Requirements Focus Group Report, Army Natick Research Development and Engineering Command. Natick Soldier Center Technical Report Natick/TR-07/021, U.S. Pentagon Report A274274.
100. Creighton T.E, Hibbard B., Doherty S., McManus K. (2008). Massachusetts State Police Special Tactical Operations Team User Focus Group Report: Law Enforcement Advanced Protection (LEAP) Duty Uniforms, Integrated Head Protection, Chemical/Biological Protection and Human Systems Integration. U.S. Pentagon Report A504284.
101. North Atlantic Treaty Organization (2000). Nuclear, Biological, and Chemical (NBC) Defense Factors in the Design, Testing and Acceptance of Military Equipment. AEP-7 (Ed. 4). Brussels: Military Agency for Standardization.
102. Kowalski W.J., Bahnfleth W.P., Whittam T.S. (1999). Filtration of airborne microorganisms: modeling and prediction. ASHRAE Trans. Res. 105: 4-17.
103. Lin P.J.Y. (2010). Electrospinning of a nanofibrous filtration medium with application in bioprotective clothing. M. Chem. Mat. Eng. thesis, Royal Military College of Canada, Kingston, ON, Canada.
104. Kim C.S., Bao L., Okuyama K., Shimada S., Niinuma H. (2006). Filtration efficiency of a fibrous filter for nanoparticles. J. Nanopart. Res. 8: 215-221.
105. Yang R.T. (1997). Gas Separation by Adsorption Processes. London: Imperial College Press.
106. Ishizaki K., Komarneni S., Nanko M. (1998). Porous Materials, Process Technology and Applications. Boston: Kluwer Academic.
107. British Standards Institution (2007). Personal Protective Equipment: Ergonomic Principles. BS EN 13921:2007.
108. Adams S.A., Slocum A.C., Keyserling W.M. (1994). A model for protective clothing effects on performance. Int. J. Clothing Sci. Technol. 6: 6-16.
109. International Organization for Standardization (2004). Ergonomics of the thermal environment: determination of metabolic rate. ISO 8996:2004.
110. International Organization for Standardization (2007). Respiratory Protective Devices: Human Factors; Part 1: Metabolic Rates and Respiratory Flow Rates. ISO 16976-1:2007.
111. Flouris, A.D., Cheung, S.S. (2006). Design and control optimization of microclimate liquid cooling systems underneath protective clothing. Ann. Biomed. Eng. 34: 350-372.
112. Roberge R.J., Kim J.-H., Coca A. (2011). Protective facemask impact on human thermoregulation: an overview. Ann. Occup. Hyg. Online, Sept. 13.
113. Caretti D.M., Gardner P.D., Coyne K.M. (2004). Workplace Breathing Rates: Defining Anticipated Values and Ranges for Respirator Certification Testing. Edgewood Chemical Biological Center, U.S. Army Research, Development and Engineering Command, Report ECBC-TR-316.
114. Clayton M.P., Bancroft B., Rajan B. (2002). A review of assigned protection factors of various types and classes of respiratory protective equipment with reference to their measured breathing resistances. Ann. Occup. Hyg. 46: 537-547.
115. Proctor D.F. (1952). Studies of respiratory air flow in measurement of ventilator function. Dis. Chest 22: 432-446.
116. International Organization for Standardization (2011). Respiratory Protective Devices: Human Factors: Part 3: Physiological Responses and Limitations of Oxygen and Limitations of Carbon Dioxide in the Breathing Environment. ISO/TS 16976-3:2011.
117. International Organization for Standardization (1989). Garment Constructions and Anthropometric Surveys: Body Dimensions. ISO TS 8559:1989.
118. North Atlantic Treaty Organization (2002). Methodology for Anthropometric Data. STANAG 2177 (Ed. 2). Brussels: Military Agency for Standardization. NATO unclassified.
119. SAE International (2002). Civilian American and European Surface Anthropometry Resource (CAESAR) European Edition. Warrendale, PA: SAE.
120. British Standards Institution (2004). Principles for Selecting and Using Test Persons for Testing Anthropometric Aspects of Industrial Products and Designs. BS ISO 15537:2004.
121. Committee for European Norms (2008). Safety of Machinery: Human Body Measurements; Part 3: Anthropometric Dat. EN 547-3:1996 + A1:2008.
122. SAE International (2002). Civilian American and European Surface Anthropometry Resource (CAESAR), North American Edition. Warrendale, PA: SAE.
123. Young, J.W. (1993). Head and Face Anthropometry of Adult U.S. Civilians. Federal Aeronautics Association, U.S. Department of Transportation, DOT/FAAIANM93/10, DTIC Accession ADA268661.
124. Yang L., Shen H., Wu G. (2007). Racial differences in respirator fit testing: a pilot study of whether American fit panels are representative of Chinese faces. Ann. Occup. Hyg. 51: 415-421.
125. Facefinder (2011). http://www.sizechina.com/facefinder.
126. Kim H., Han D.-H., Roh Y.-M., Kim K., Park Y.-G. (2003). Facial anthropometric dimensions of Koreans and their associations with fit of quarter-mask respirators. Ind. Health 41: 8-18.
127. Chamberland A., Carrier R., Forest F., Hachez, G. (1998). 1997 Anthropometric Survey of the Land Forces. Department of National Defense (Canada) Contractor Report W7711-6-7350.
128. Donelson S.M., Gordon C.C. (1996). 1995 Matched Anthropometric Database of U.S. Marine Corps Personnel: Summary Statistics. Technical Report Natick/TR-06-036 DTIC Accession ADA316646.
129. Gordon C.C., Churchill T., Clauser C.E., Bradtmiller, B., McConville, J.T. (1989). Anthropometric Survey of U.S. Army Personnel: Methods and Summary Statistics 1988. DTIC Accession ADA225094.
130. U.S. military anthropometric data are available for download from the Defense Technical Information Center, http://www.dtic.mil/dticasd/docs-a/anthromilitary.html.
131. Other military anthropometric data are available for download from the Defense Technical Information Center, http://www.dtic.mil/dticasd/docs-a/anthroothermilitary.html.
132. Stirling M., National Anthropometric Survey of Female Firefighters, CACFOA (Chief Fire Officers Organization, UK), http://www.humanics-es.com/FireFighterAnthropometry.pdf. Accessed Feb. 2012.
133. Data for selected law enforcement and health care personnel are available for download from the Defense Technical Information Center at http://www.dtic.mil/dticasd/docs-a/anthrocivilian.html.
134. Lin Y.-C, Wang M.-J. J., Wang E.M. (2004). The comparisons of anthropometric characteristics among four peoples in East Asia. Appl. Ergon. 35: 173-178.
135. PeopleSize 2008, Open Ergonomics. Contains 289 individual body measurements for U.S., UK, German, and Australian adults and American, Australian, Belgian, British, Chinese, French, German, Japanese, and Swedish people, by age group.
136. Weinberg S.M., Naidoo S., Govier D.P., Martin R.A., Kane A.A., Marazita M.L. (2006). Anthropometric precision and accuracy of digital three-dimensional photogrammetry: comparing the Genex and 3dMD imaging systems with one another and with direct anthropometry. J. Craniofa. Surg. 17: 477-483.
137. Kau C.H., Richmond S., Zhurov A.I., Knox J., Chestnutt I., Hartles F., Playle R. (2005). Reliability of measuring facial morphology with a 3-dimensional laser scanning system. Am. J. Orthod. Dentofac. Orthop. 128: 424-430.
138. Ghoddousi H., Edler R., Haers P., Wertheim D., Greenhill D. (2007). Comparison of three methods of facial measurement. Int. J. Oral Maxillofac. Surg. 36: 250-258.
139. Hack A.L., Hyatt E.C., Held B.J., Moore T.O., Richards C.P., McConville J.T. (1973). Selection of Respirator Test Panels Representative of U.S. Adult Facial Sizes. Report LA5488. Los Alamos, NM: Los Alamos Scientific Laboratory of the University of California.
140. Hack A.L., McConville J.T. (1978). Respirator protection factors: Part I. Development of an anthropometric test panel. Am. Ind. Hyg. Assoc. J. 39: 970-975.
141. Oestenstad R.K., Elliott L.J., Beasley T.M. (2007). The effect of gender and respirator brand on the association of respirator fit with facial dimensions. J. Occup. Environ. Hyg. 4: 923-930.
142. Riedar K., Oestenstad H., Dillion K., Perkins L.L. (1990). Distribution of faceseal leak sites on a half-mask respirator and their association with facial dimensions. Am. Ind. Hyg. Assoc. J. 51: 285-290.
143. Oestenstad R.K., Perkins L.L. (1992). An assessment of critical anthropometric dimensions for predicting the fit of a half-mask respirator. Am. Ind. Hyg. Assoc. J. 53:639-644.
144. Zhuang Z., Coffey C.C., Berry Ann, R. (2005). The effect of subject characteristics and respirator features on respirator fit. J. Occup. Environ. Hyg. 2: 641-649.
145. Oestenstad R.K., Elliott L.J., Beasley T.M. (2007). The effect of gender and respirator brand on the association of respirator fit with facial dimensions. J. Occup. Environ. Hyg. 4: 923-930.
146. Zhuang Z., Guan J., Hsiao H., Bradtmiller B. (2004). Evaluating the representativeness of the LANL respirator fit test panels for the current U.S. civilian workers. J. Int. Soc. Respir. Prot. 21: 83-93.
147. Zhuang Z., Bradtmiller B., Shaffer R.E. (2007). New respirator fit test panels representing the current U.S. civilian work force. J. Occup. Environ. Hyg. 4: 647-659.
148. Zhuang Z., Bradtmiller B. (2005). Head and face anthropometric survey of U.S. respirator users. J. Occup. Environ. Hyg. 2: 567-576.
149. International Organization for Standardization (2010). Respiratory Protective Devices: Human Factors; Part 2: anthropometrics. ISO TS 16976-2.
150. Canadian Standards Association (2002). Specifications for Facially Featured Headforms. CSA Z262.6-02.
151. American Society for Testing and Materials (2009). Standard Specification for Head-forms. ASTM F2220-02.
152. British Standards Institution (2006). Headforms for Use in the Testing of Protective Helmets. BS EN 960:2006.
153. American Society for Testing and Materials (2004). Standard Practices for Qualitatively Evaluating the Comfort, Fit, Function, and Integrity of Chemical-Protective Suit Ensembles. ASTM F1154-99a.
154. Scanlan S., Roberts W., McCallum R., Robinson D. (2004). A Dexterity and Tactility Evaluation of the Australian Nuclear Biological Chemical (NBC) Glove. Defense Science and Technology Organization (Australia) DSTO-TN-0576.
155. Greiner T.M. (1991). Hand Anthropometry of U.S. Army Personnel. Technical Report Natick/TR-92/011. U.S. Army.
156. Hidson D. (1991). Development of a Standard Anthropometric Dimension Set for Use of Computer-Aided Glove Design. Technical Note 91-22. Defense Research Establishment, Ottawa, ON, Canada.
157. Garrett J.W. (1971). The adult human hand: some anthropometric and biomechanical considerations. Human Factors: J. Hum. Factors Ergon. Soc. 13: 117-131.
158. Wunderlich R.E.; Cavanagh P.R. (2001). Gender differences in adult foot shape: implications for shoe design. Medi. Sci. Sports Exercise 33: 605-611.
159. British Standards Institution (2003). Respiratory Protective Devises: Full Face Masks-Requirements, Testing, Marking. BS EN 136:1998.
160. Johnson A.T., Weiss R.A., Grove C. (1992). Respirator performance rating tables for mask design. Am. Ind. Hyg. Assoc. J. 53: 193-202.
161. International Organization for Standardization (in preparation). Respiratory Protective Devices: Human Factors; Part 7: Hearing and Speech. ISO TS 16976-7.
162. Plummer R., Stobbe T., Ronk R., Myers W., Kim H., Jaraiedi M. (1985). Manual dexterity evaluation of gloves used in handling hazardous materials. Proc. Hum. Factors Soc. 29: 819-823.
163. Dianat I., Haslegrave C., Stedmon A. (2010). Short and longer duration effects of protective gloves on hand performance capabilities and subjective assessments in a screwdriving task. Ergonomics 53: 1468-1483.
164. Barile F.A. (2008). Principles of Toxicity Testing. Boca Raton, FL: CRC Press.
165. North Atlantic Treaty Organization (2009). Physiological Requirements for Aircrew CBRN Defence Assemblies Used in Flight. STANAG 3943 (Ed. 3). Brussels: Military Agency for Standardization. NATO unclassified.
166. North Atlantic Treaty Organization (1990). Mechanical Environmental Conditions to which Material Intended for Use by NATO Forces Could be Exposed. STANAG 2914. Brussels: Military Agency for Standardization. NATO unclassified.
167. North Atlantic Treaty Organization (2001). Mechanical Environmental Description. AECP-1 (Ed. 2). Brussels: Military Agency for Standardization. NATO unclassified.
168. North Atlantic Treaty Organization (1999). NATO Levels of Packaging. STANAG 4280 PPS (Ed. 2). Brussels: Military Agency for Standardization. NATO unclassified.
169. Zhou W., Reddy N., Yang Y. (2005). Overview of protective clothing. In: Scott R.A. (Ed.), Textiles for Protection, pp. 3-30. Boca Raton, FL: CRC Press.
170. Altman M., Enache S., Magyar M. (2007). Barrier laminates and articles made therefrom. U.S. Patent App. 20070021023.
171. Blake H., Dacey P. (2007). Fire resistant barrier laminates and articles made therefrom. U.S. Patent Appl. 20070037020.
172. Horrocks A.R., Price D. (2001). Fire Retardant Materials. Cambridge, UK: Woodhead Publishing.
173. Hearle J.W.S. (2005). Fibres and fabrics for protective textiles. In: Scott R.A. (Ed.), Textiles for Protection, pp. 118-150. Boca Raton, FL: CRC Press.
174. Forsberg K., Keith L.H. (1999). Chemical Protective Clothing Perfomance Index, 2nd ed. Toronto: Wiley.
175. Ivanov V.S. (1992). Radiation Chemistry of Polymers (New Concepts in Polymer Science Series). Utrecht: VSP.
176. North Atlantic Treaty Organization (2001). Specification for Paints and Paint Systems, Resistant to Chemical Agents and Decontaminants, for the Protection of Land Military Equipment. STANAG 4360 (Ed. 1). Brussels: Military Agency for Standardization.
177. Thomas, S., Zaikov, G. (Eds.) (2008). Polymer Nanocomposite Research Advances. New York: Nova Science Publishers.
178. Krishnamoorti R., Vaia R.A., Giannelis E.P. (1996). Structure and dynamics of polymer-layered silicate nanocomposites. Chem. Mater. 8: 1728-1734.
179. Garces J.M., Moll D.J., Bicerano J., Fibiger R., McLeod D.G. (2000). Polymeric nanocomposites for automotive applications. Adv. Mater. 12: 1835-1839.
180. Yano K., Usuki A., Okada A. (1997). Synthesis and properties of polyimide-clay hybrid films. J. Polym. Sci. A: Polym. Chem. 35: 2289-2294.
181. Giannelis E.P. (1996). Polymer layered silicate nanocomposites. Adv. Mater. 8: 29-35.
182. Xu R.J., Manias E., Snyder A.J., Runt J. (2001). New biomedical poly(urethane urea)-layered silicate nanocomposites. Macromolecules 34: 337-339.
183. LeBaron P.C., Wang Z., Pinnavaia T.J. (1999). Polymer-layered clay composites. Appl. Clay Sci. 15: 11-29.
184. Gusev A.A., Lusti H.R. (2001). Rational design of nanocomposites for barrier applications. Adv. Mater. 13: 1641-1643.
185. Duncan S., Pedersen D. (2005). Next generation chemical biological protective materials for the Canadian military. 1st Int. Conf. on Individual Protective Equipment, Bath, UK.
186. Grove C. (2005). Composite materials and filtration media. 1st Int. Conf. on Individual Protective Equipment, Bath, UK.
187. Wilusz E., Zukas W.X., Fekete Z.A., Karasz F.E. (2004). Ion beam modification of permselective membranes for chemical biological protective clothing. 8th Int. Symp. on Protection Against Chemical and Biological Warfare Agents, Gothenburg, Sweden, June.
188. Potluri P., Needham P. (2005). Technical textiles for protection. In: Scott R.A. (Ed.), Textiles for Protection, pp. 151-175. Boca Raton, FL: CRC Press.
189. Ashley S. (2003). X-ray proofing. Sci. Am., May.
190. Corcoran E.C., Forrest W., Horton R., Kelly D.G., Mattson K., McDonald C., Nielsen K.S., Topping K., Weir R.D., Yonken A. (2011). A performance study of radio-opaque personal protective fabrics for the reduction of transmittance of gamma-rays and neutrons. J. Radioanal. Nucl. Chem. 291: 251-256.
191. Hsieh A.J., Yi J., Pate B.D., Boyce M.C. (2006). Unraveling Dynamic Mechanical Deformation in Segmented Polyurethanes: from High Strain-Rate Hardening to Complete Fold Recovery. U.S. Pentagon Report A837184.
192. Mukhopadhyay A., Midha V.M. (2008). A review on designing the waterproof breathable fabrics: Part I. Fundamental principles and designing aspects of breathable fabrics. J. Ind. Text. 37: 225-262.
193. Lee, S., Obendorf S. K. (2001). A statistical model to predict pesticide penetration through nonwoven chemical protective fabrics. Text. Res. J. 71: 1000-1009.
194. Tan K., Obendorf S.K. (2006). Surface modification of microporous polyurethane membrane with poly(ethylene glycol) to develop a novel membrane. J. Membr. Sci. 274: 150-158.
195. Lomax G.R. (1985). The design of waterproof, water vapor-permeable fabrics. J. Ind. Text. 15: 40-66.
196. Gore R.W., Allen S.B. (1980). Waterproof laminate. U.S. Patent 4,194,041.
197. Farnworth B., Lotens W.A., Wittgen P.P.M.M. (1990). Variation of water vapor resistance of microporous and hydrophilic films with relative humidity. Text. Res. J. 60: 50-53.
198. Jain M.K., Wu H.Sh. (2005). Waterproof and high moisture vapor permeable fabric laminate. U.S. Patent Appli. 20050014432.
199. Beadle B, Garrett G., Clarke A. (2006). Polymer material. World Patent WO/2006/035236.
200. Willis C., Brewer S., Stone C., Dennis M., Beadle B. (2004). Selectively permeable membranes based on interpolymer complexes. 8th Int. Symp. on Protection Against Chemical and Biological Warfare Agents, Gothenburg, Sweden, June.
201. Aquanarijn Micro Filtration BV. http://www.microfiltration.nl/polymmicrosieves.php.
202. Tong H.D., Jansen H.V., Gadgil V.J., Bostan C.G., Berenschot E., van Rijn C.J.M., Elwenspoek M. (2004). Silicon nitride nanosieve membrane. Nano Lett., 4: 283-287.
203. Jahn S.F., Engisch L., Baumann R.R., Ebert S., Goedel W.A. (2009). Polymer microsieves manufactured by inkjet technology. Langmuir 25: 606-610.
204. Gironès M., Akbarsyah I.J., Nijdam W., van Rijn C.J.M., Jansen H.V., Lammertink R.G.H., Wessling M. (2006). Polymeric microsieves produced by phase separation micromolding. J. Membr. Sci. 283: 411-424.
205. Bikel M., Çulfaz P.Z., Bolhuis-Versteeg L.A.M., Garduño Pérez J., Lammertink R.G.H., Wessling M. (2010). Polymeric microsieves via phase separation microfabrication: process and design optimization. J. Membr. Sci. 347: 93-100.
206. Prenen A.M., van der Werf J.C.A., Bastiaansen C.W.M., Broer D.J. (2009). Monodisperse, polymeric nano-and microsieves produced with interference holography. Adv. Mater. 21: 1751-1755.
207. Van Rijn C.J.M. (2004). Nano and Micro Engineered Membrane Technology. Amsterdam: Elsevier.
208. Angadjivand S.A., Jones M.E., Meyer D.E. (2000). Electret filter media. U.S. Patent 6,119,691.
209. Rengasamy S., Zuang Z., Roberge R., Shaffer R.E. (2010). Particulate respiratory protection: overview, emerging issues and research needs. In: Argosyan V.E. (Ed.), Protective Devises: Types, Uses and Safety, pp. 131-160. New York: Nova Science Publishers.
210. Jasper W.J., Mohan A., Hinestroza J., Barker R. (2007). Degradation processes in corona-charged electret filter-media with exposure to ethyl benzene. J. Eng. Fibers Fabrics 2: 19-24.
211. Rengasamy S., Eimer B., Shaffer R. (2009). Comparison of nanoparticle filtration performance of NIOSH-approved and CE marked filtering facepiece respirators. Ann. Occup. Hyg. 53: 117-128.
212. Kallio G.A., Dietz P.W., Gutfinger C. (1981). Filtration efficiencies in electrostatically augmented granular beds. Environ. Int. 6: 415-422.
213. Graham K., Ouyang M., Raether T., Grafe T., McDonald B., Knauf P. (2002). Polymeric nanofibers in air filtration applications. Proc. 15th Annual Technical Conference and Expo of the American Filtration and Separations Society, Galveston, TX.
214. Gibson P., Schreduer-Gibson H., Rivin D. (2001). Transport properties of porous membranes based on electrospun nanofibers. Colloids Surf. A: Physicochem. Eng. Aspects 187-188:469-481.
215. Wang J., Kim S.C., Pui D.Y.H., (2008). Investigation of the figure of merit for filters with a single nanofiber layer on a substrate. J. Aerosol Sci. 39: 323-334.
216. Huang Z.-M., Zhang Y.-Z., Kotaki M., Ramakrishna S. (2003). A review on polymer nanofibers by electrospinning and their applications in nanocomposites. Compos. Sci. Technol. 63: 2223-2253.
217. Subbiah T., Bhat G.S., Tock R.W., Parameswaran S., Ramkumar S.S. (2005). Electro-spinning of nanofibers. J. Appl. Polym. Sci. 96: 557-569.
218. Burger C., Hsiao B.S., Chu B. (2006). Nanofibrous materials and their applications. Annu. Rev. Mater. Res. 36: 333-368.
219. Grafe T.H., Graham K.M. (2003). Nanofiber webs from electrospinning. 5th Int. Conf. on Nonwovens in Filtration, Stuttgart, Germany.
220. Commercial nanofibre centrifuge technology. Smart Texti. and Nanotechnol. June 2011.
221. Acatay K., Simsek E., Yang C.O., Menceloglu Y.Z. (2004). Tunable, superhydrophobically stable polymeric surfaces by electrospinning. Angew. Chemi. Int. Ed. 43:5210-5213.
222. Gleason K.K., Rutledge G.C., Gupta M., Ma M., Mao Y. (2007). Superhydrophobic fibers produced by electrospinning and chemical vapor deposition. U.S. Patent Appl. 20070237947.
223. Li H.-W., Wu C.-Y., Tepper F., Lee J.-H., Lee C.N. (2009). Removal and retention of viral aerosols by a novel alumina nanofiber filter. J. Aerosol Sci. 40: 65-71.
224. March H. (Ed.) (2001). Activated Carbon Compendium. Kidlington, UK: Elsevier Science.
225. Gudgin Dickson E.F., Black R., Cordoneanu A., Evans M., Hordry N., Iutzi R., Cunningham N. (2007). Novel carbon-based materials for respiratory protection. Proc. IPE 2007, Melbourne, Australia.
226. Liang C., Dai S., Guiochon G. (2003). A graphitized-carbon monolithic column. Anal. Chem. 75: 4904-4912.
227. Taguchi A., Smått J.-H., Lindén M. (2003). Carbon monoliths possessing a hierarchical, fully interconnected porosity. Adv. Mater. 15: 1209-1211.
228. Gadkaree K.P. (1998). Carbon honeycomb structures for adsorption applications. Carbon 36: 981-989.
229. Cunningham N., Evans M., Bang S. (2008). Production of carbonaceous porous bodies for use in filtration systems. Canadian Patent Appl. 2,640,893 2008/10/12, U.S. Patent Appl. 12/285,399 2008/10/03.
230. Lozano-Castelló D., Cazorla-Amorós D., Linares-Solano A., Quinn D.F. (2002). Activated carbon monoliths for methane storage: influence of binder. Carbon 40: 2817-2825.
231. Liang S.H.C., Harrison B.H., Pagotto J. (1995). Organic amine-impregnated activated carbon. U.S. Patent 4,531,953.
232. Moermans B., Beuckelaer W. de, Vankelecom I.F.J., Ravishankar R., Martens, J.A., Jacobs P.A. (2000). Incorporation of nano-sized zeolites in membranes. Chem. Commun. 2000: 2467-2468.
233. Edwards J.V., Buschle-Diller G., Goheen S. (Eds.) (2006). Modifed Fibers with Medical and Specialty Applications. Dordrecht, The Netherlands: Springer.
234. Giletto A., White W., Cisar A.J., Hitchens G.D., Fyffe J. (2003). Reactive decontamination formulation. U.S. Patent 6,569,353.
235. Bannard R.A.B., Casselman A.A., Purdon J.G., Mendoza C.E. (1991). Metal oximate/polyethylene glycols chemicals decontaminant system. U.S. Patent 5,071,877.
236. Cao L. (2005). Carrier-Bound Immobilized Enzymes: Principles, Application and Design. Weinheim, Germany: Wiley-VCH.
237. Russell A.J., Drevon G.F. (2003). Irreversible immobilization of diisopropylfluorophosphatase into polyurethane coatings. World Patent WO/2003/066851.
238. Rajan K.S. (1991). Enzymatic Detoxification of Chemical Warfare Agents: Immobilization of the Enzyme for Material Surfaces. U.S. Office of Naval Research DTIC Accession ADA231056.
239. Hill C.L., Delannoy L., Duncan D.C., Weinstock I.A., Renneke R.F., Reiner R.S., Atalla R.H., Han J.W., Hillesheim D.A., Cao R., Anderson T.M., Okun N.M., Musaev D.G., Geletii Y.V. (2007). Complex catalysts from self-repairing ensembles to highly reactive air-based oxidation systems. C. R. Chim. 10: 305-312.
240. Gall R.D., Hill C.L., Walker J.E. (1996). Selective oxidation of thioether mustard (HD) analogs by tert-butylhydroperoxide catalyzed by H5PV2Mo10O40 supported on porous carbon materials. J. Catal. 159: 473-478.
241. Grandcolas M., Louvet A., Keller N., Keller V. (2008). Layer-by-layer deposited titanate-based nanotubes for solar photocatalytic removal of chemical warfare agents from textiles. Angew. Chem. Int. Ed. 48: 161-164.
242. Prasad G.K., Mahato T.H., Singh B., Ganesan K., Srivastava A.R., Kaushik M.P., Vijayraghavan R. (2008). Decontamination of sulfur mustard and sarin on titania nanotubes. AIChE J. 54: 2957-2963.
243. Grandcolas M., Sinault L., Mosset F., Louvet A., Keller N., Keller V. (2011). Self-decontaminating layer-by-layer functionalized textiles based on WO3-modified titanate nanotubes: application to the solar photocatalytic removal of chemical warfare agents. Appl. Catal. A: General 391: 455-467.
244. Allen, S.D. (2006). Light-mediated air purification system and method. U.S. Patent Appl. 20060182670.
245. Axtell H., Pease T. (2004). The incorporation of reactive nanoparticles into textiles for protection against chemical and biological warfare agents. 8th Int. Symp. on Protection Against Chemical and Biological Warfare Agents, Gothenburg, Sweden.
246. Maillard J.Y. (2002). Bacterial target sites for biocide action. J. Appl. Microbiol. Symp. Suppl. 92:16S-27S.
247. TransTex Technologies, Inc. http://www.silverclear.ca/html/product.html.
248. Sambhy V., MacBride M.M., Peterson B.R., Sen A. (2006). Silver bromide nanoparticle/polymer composites: dual action tunable antimicrobial materials. JACS Articles (Web 07-07-2006).
249. Thomas V., Bajpai M., Bajpai S.K. (2011). In situ formation of silver nanoparticles within chitosan-attached cotton fabric for antibacterial property. J. Ind. Text. 40: 229-245.
250. Borkow G., Gabbay, J. (2004). Putting copper into action: copper impregnated products with potent biocidal activities. FASEB J. 18: 1728-1730.
251. Borkow G., Gabbay J. (2005). Copper as a biocidal tool. Curr. Medi. Chem. 12:2163-2175.
252. Borkow G., Gabbay J. (2009). Copper, an ancient remedy returning to fight microbial, fungal and viral infections. Curr. Chem. Biol. 3: 272-278.
253. Borkow G., Gabbay J. (2006). Endowing textiles with permanent potent biocidal properties by impregnating them with copper oxide. J. Text. Apparel Technol. Manage. 5: 1-3.
254. Obendorf S.K. (2010). Improving personal protection through novel materials. AATCC Rev. July-Aug., pp. 44-50.
255. Lee S. (2009). Multifunctionality of layered fabric systems based on electrospun polyurethane/zinc oxide nanocomposite fibers. J. Appl. Polym. Sci. 114:3652-3658.
256. Kenawy E.-R., Abdel-Hay F.I., El-Magd A.A., Mahmoud Y. (2006). Biologically active polymers: VII. Synthesis and antimicrobial activity of some crosslinked copolymers with quaternary ammonium and phosphonium groups. React. Funct. Polym. 66: 419-429.
257. Tan K., Obendorf S.K. (2007). Fabrication and evaluation of electrospun nanofibrous antimicrobial nylon 6 membranes. J. Membr. Sci. 305: 287-298.
258. Acatay K., Simsek E., Akel M., Menceloglu Y.Z. (2004). Electrospinning of low surface energy quaternary ammonium salt containing polymers and their antibacterial activity. In: Guceri S., Gogotsi Y.G., Kuznetsov V. (Eds.), Nanoengineered Nanofibrous Materials, NATO Science Series II, Vol.169, pp. 97-106. Dordrecht, The Netherlands: Kluwer Academic.
259. Chen C.Z., Cooper S.L. (2002). Interactions between dendrimer biocides and bacterial membranes. Biomaterials 23: 3359-3368.
260. Harney M.B., Pant R.R., Fulmer P.A., Wynne J.H. (2009). Surface self-concentrating amphiphilic quaternary ammonium biocides as coating additives. ACS Appl. Mater. Interf. 1: 39-41.
261. Ohayon D., Lee S., Wander J., Wu C.Y., Messier P.J. (2005). Microbiological filtering performance of NBC individual protection canisters. 1st Int. Conf. on Individual Protective Equipment, Bath, UK.
262. Lee J.H., Wu C.-Y., Wysocki K.M., Farrah S., Wander J. (2008). Efficacy of iodine-treated biocidal filter media against bacterial spore aerosols. J. Appl. Microbiol. 105: 1318-1326.
263. Ratnesar-Shumate S., Wu C.-Y., Wander J., Lundgren D., Farrah S., Lee J.-H., Wanakule P., Blackburn M., Lan B.-F. (2008). Evaluation of physical capture efficiency and dis-infection capability of an iodinated biocidal filter medium. Aerosol Air Qual. Res. 8: 1-18.
264. Rengasamy S., Fisher E., Shaffer R.E. (2010). Evaluation of the survivability of MS2 viral aerosols deposited on filtering face piece respirator samples incorporating antimicrobial technologies. Am. J. Infect. Control 38: 8-17.
265. Thorn R.M.S., Austin A.J., Greenman J., Wilkins J.P.G., Davis P.J. (2009). In vitro comparison of antimicrobial activity of iodine and silver dressings against biofilms. J. Wound Care 18: 343-346.
266. Williams J.F., Suess J.C., Cooper M.M., Santiago J.I., Chen T.-Y., Mackenzie C.D., Fleiger C. (2006). Antimicrobial functionality of healthcare textiles: current needs, options, and characterization of N halamine-based finishes. Res. J. Text. Apparel 10: 1-11.
267. Liang J., Chen Y., Barnes K., Wu R., Worley S.D. (2006). N-Halamine/quat siloxane copolymers for use in biocidal coatings. Biomaterials 27: 2495-2501.
268. Tuinman, I. (2006). Electrospinning of antimicrobial polymers into nanofibrous protective layers. Int. Nonwovens Tech. Conf. 2006, Houston, TX.
269. Eby D.M., Farrington K.E., Johnson G.R. (2008). Combination Antimicrobial Nanocomposite Materials for Neutralization of Biological Threat Agents. U.S. Pentagon Report A131784.
270. O'Hanlon S.J., Enright M.C. (2009). A novel bactericidal fabric coating with potent in vitro activity against meticillin-resistant Staphylococcus aureus (MRSA). Int. J. Antimicrob. Agents 33: 427-431.
271. Van Langenhove L., Puers R., Matthys D. (2005). Intelligent textiles for protection. In Scott, R.A. (Ed.), Textiles for Protection, Chap. 7. Boca Raton, FL: CRC Press.
272. Farid M.M., Khudhair A.M., Razack S.A.K., Al-Hallaj S. (2004). A review on phase change energy storage: materials and applications. Energy Conversion Manage. 45: 1597-1615.
273. Shim H., McCullough E.A., Jones B.W. (2001). Using phase change materials in clothing. Text. Res. J. 71: 495-502.
274. McKee K.W., Tack, D.W. (2007). Active Camouflage for Infantry Headwear Applications. CR-2007-023. Toronto, ON, Canada: Defense Research and Development Canada.
275. Porter D., Metcalfe E., Thomas M.J.K. (2000). Nanocomposite fire retardants: a review. Fire Mater. 24: 45-52.
276. Breuer O., Sundararaj U. (2004). Big returns from small fibers: a review of polymer/carbon nanotube composites. Polym. Compos. 25: 630-645.
277. Aergerter M.A., Almeida R., Soutar A., Tadanaga K., Yang H., Watanabe T. (2008). Coatings made by sol-gel and chemical nanotechnology. J. Sol-Gel Sci. Technol. 47: 203-236.
278. Horrocks A.R., Kandola B.K., Davies P.J., Zhang S., Padbury S.A. (2005). Polym. Degrad. Stabil. 88: 3-12.
279. Grand A.F., Wilkie C.A. (2000). Fire Retardency of Polymeric Materials. New York: Marcel Dekker.
280. Scott R.A. (2000). Textiles in defence. In: Horricks A.R., Anand S.C. (Eds.), Handbook of Technical Textiles. Cambridge, UK: Woodhead.
281. Sitti M., Fearing R.S. (2003). Synthetic gecko foot-hair micro/nano-structures as dry adhesives. J. Adhes. Sci. Technol. 17: 1055-1073.
282. Kururay C. (2010). New elastomer possesses transparency, softness and adhesive properties. http://www.kuraray.co.jp/en/release/2010/100330.html. Accessed Oct. 17, 2011.
283. Patel P. (2011). MIT Technology Review: Super Velcro. http://www.technologyreview.com/computing/24539/?a=f. Accessed Jan. 3, 2011.
284. Duerig T.W., Pelton A.R. (1996). The use of superelasticity in medicine. Fachz. Handel Wirtsch. Tech. Wissensch: Metall. Sonderdruck Heft 9/96:569-574.
285. Lee H.J., Michielsen S. (2007). Preparation of a superhydrophobic rough surface. J. Polym. Sci. B: Polym. Phys. 45: 253-261.
286. Brewer S.A., Willis C.R. (2008). Structure and oil repellency: textiles with liquid repellency to hexane. Appl. Surf. Sci. 254: 6450-6454.
287. Xue C.-H., Jia S.-T., Zhang J., Ma J.-Z. (2010). Large-area fabrication of superhydrophobic surfaces for practical applications: an overview. Sci. Technol. Adv. Mater. 11: 1-15.
288. Ma M., Hill R.M., Lowery J.L., Fridrikh S.V., Rutledge G.C. (2005). Electrospun poly(styrene-block-dimethylsiloxane) block copolymer fibers exhibiting superhydrophobicity. Langmuir 21: 5549-5554.
289. Lombardi J.L., Michielsen S., Connors R., Churchward G. (2007). Lotus LADM Based Self-Decontaminating Surfaces. U.S. Pentagon Report A620174.
290. Zhu L., Xiu Y., Xu J., Tamirisa P.A., Hess D.W., Wong C.-P. (2005). Superhydrophobicity on two-tier rough surfaces fabricated by controlled growth of aligned carbon nanotube arrays coated with fluorocarbon. Langmuir 21: 11208-11212.
291. Manca M., Cannavale A., de Marco L., Arico A.S., Cingolani R., Gigli G. (2009). Durable superhydrophobic and antireflective surfaces by trimethylsilanized silica nanoparticles-based sol-gel processing. Langmuir 25: 6357-6362.
292. Lopata E.S., Nakanishi J.S. (1996). Process for plasma-enhanced chemical vapor deposition of anti-fog and anti-scratch coatings onto various substrates. U.S. Patent 5,487,920.
293. Howarter, J.A., Youngblood J.P. (2008). Self-cleaning and next generation anti-fog surfaces and coatings, Macromol. Rapid Commun. 29: 455-466.
294. Wu L.Y.L., Soutar A.M., Zeng X.T. (2005). Increasing hydrophobicity of sol-gel hard coatings by chemical and morphological modifications. Surf. Coat. Technol. 198:420-424.
295. Patel P.J., Hsieh A.J., Gilde G.A. (2006). Improved Low-Cost Multi-Hit Transparent Armor. U.S. Pentagon Report A470184.
296. Robinette J., O'Brien D.J., Heflin J.R., Ridley J. (2007). Nanocomposite Interphases for Improved Transparent Polymer Composite Materials. U.S. Pentagon Report A416684.
297. Tan N.C.B., Napadensky E., Sloan J.M., Ma S., Cooper S.L. (2000). Barrier Urethanes Based on Polyethylene Soft Segments. U.S. Pentagon Report A714283.
298. Mitcheson P.D., Yeatman E.M., Rao G.K., Holmes A.S., Green T.C. (2008). Energy harvesting from human and machine motion for wireless electronic devices. Proc. IEEE 96: 1457-1486.
299. Devaux E., Koncar V., Kim B., Campagne C., Roux C., Rochery M., Saihi D. (2007). Processing and characterization of conductive yarns by coating or bulk treatment for smart textile applications. Trans. Inst. Meas. Control 29: 355-376.
300. Hodgson M. (2008). From paper hats to protective devices: the design process for a very compact CBRN hood. 14th Meeting of the International for Society for Respiratory Protection, Dublin, Ireland.
301. Ducharme M. (2006). Thermal insulation of the LASA ventilated-NBC suit during immersion in cold water. Proc. SAFE Symp. 2006, pp. 292-300.
302. Ducharme M. (2006). Heat tolerance of aircrew wearing charcoal NBC coveralls versus the LASA ventilated NBC suit. Proc. SAFE Symp. 2006, pp. 301-310.
303. Bodurtha P., Gudgin Dickson E.F., Daynard D., McPherson D., Bouillon C., Harrison B., Winship J. (2008). A full system assessment of the chemical/biological protection provided by the advanced NBC protective (ANBCP) Jet and HT systems. SAFE Europe, Geneva, Switzerland.
304. Tack D.W., Colbert H.J. (2007). Soldier Integrated Headwear System: Conceptual Design Phase Summary Report. CR-2007-031. Toronto, ON, Canada: Defense Research and Development Canada.
305. Tack D.W., Vilhena P. (2007). Operational User Requirements and Priorities for a Soldier's Integrated Headwear System. CR-2007-026 Toronto, ON, Canada: Defense Research and Development Canada.
306. Tack D.W. (2006). Soldier Integrated Headwear System: System Design Process. CR 2006-301 Toronto, ON, Canada: Defense Research and Development Canada.
307. Clark R.P., de Calcina-Goff M.L. (2009). Some aspects of the airborne transmission of infection. J. R. Soc. Interf. 6: S767-S782.
308. Gardner P. (2008). Investigation of novel respirator seal concepts. 14th Meeting of the International Society for Respiratory Protection, Dublin, Ireland.
309. Duncan S., Tremblay-Lutter J., Grant T., Gudgin Dickson E. (2001). System protection performance of a next-to-skin chemical vapour protective suit. 7th Int. Symp. on Protection Against Chemical and Biological Warfare Agents, Stockholm, Sweden.
310. Duncan E.J.S., Tremblay-Lutter J.F., Gudgin Dickson E.F., Lacroix B., Grant T.L. (2006). Thin, stretchable chemical protective garment worn next-to-skin. U.S. Patent 7,062,788 B2.
311. Duncan S., Gudgin Dickson E. (2001). Degradation in whole-body vapour protection performance of air-permeable CB protective ensembles with increasing wind speed. 7th Int. Symp. on Protection Against Chemical and Biological Warfare Agents, Stockholm, Sweden.
312. Croll L.M., Smith S., Harrison B., Narayan S., Evans M., Reynolds J. (2006). Unexpected results obtained during hydrogen cyanide and cyanogen chloride testing of military carbons. 13th Meeting of the International Society for Respiratory Protection, Toronto, ON, Canada.
313. Lundgren D.A., Whitby K.T. (1965). Effect of particle electrostatic charge on filtration by fibrous filters. Ind. Eng. Chem. Process Des. Dev. 4: 345-349.
314. Backer S., Tanenhaus J. (1951). The relationship between the structural geometry of a textile fabric and its physical properties: Part III. Textile geometry and abrasion-resistance. Text. Res. J. 21: 635-654.
315. Tremblay-Lutter J., Caron P., Duncan S., Claesson O., van Houwelingen T., Stromqvist M., Gudgin Dickson E. (2004). CBplus combat operations uniform innovation: innovation in protection and benefits of international collaboration. 8th Int. Symp. on Protection Against Chemical and Biological Warfare Agents, Gothenburg, Sweden.
316. Cadarette B.S., Cheuvront S.N Kolka M.A., Stephenson L.A., Montain S.J., Sawka, M.N. (2006). Intermittent microclimate cooling during exercise heat stress in U.S. Army chemical protective clothing. Ergonomics 49: 209-219.
317. Yarborough P., Nelson C.N. (Eds.) (2005). Performance of Protective Clothing: Global Needs and Emerging Markets, Vol. 8. STP 1462. West Conshohocken, PA: American Society for Testing and Materials International.
318. Farnworth B., Dacey P. (2006). Gas distribution garment. U.S. Patent Application 2006/0026743A1.
319. Farnworth B., Dacey P. (2006). Gas distribution garment having a spacer element. U.S. Patent Appl. 2006/0174392.
320. Caretti D.M., Gardner P.D. (2003). Quantifying the heat stress attributable to respirator wear. J. Int. Soc. Respir. Prot. 20: 110-124.
321. Levine L., Quigley M.D., Cadarette B.S., Sawka M.N., Pandolf K.B. (1990). Physiologic strain associated with wearing toxic-environment protective systems during exercise in the heat. In: Das B. (Ed.), Advances in Industrial Ergonomics and Safety, Vol. II, pp. 897-904. London: Taylor & Francis.
322. Szlyk P.C., Sils I.V., Francesconi R.P., Hubbard R.W. (1989). Patterns of Human Drinking: Effects of Exercise, Water Temperature and Food Consumption. Report ADA206031. Natick, MA: Army Research Institute for Environmental Medicine.
323. McLellan T.M. (2008). Chemical-biological protective clothing: effects of design and initial state on physiological strain. Aviat. Space Environ. Med. 79: 500-508.
324. Duncan S., McLellan T., Gudgin Dickson E. (2011). Improving Comfort in Military Protective Clothing. In: Song, G. (Ed.), Improving Comfort in Clothing, Woodhead Publishing Series in Textiles No. 106, pp. 320-369. Cambridge UK: Woodhead.
325. Huang J.T., Huang V.J. (2007). Evaluation of the efficiency of medical masks and the creation of new medical masks. J. Int. Med. Res. 35: 213-223.
326. Lafferty E.A., McKay R.T. (2006). Physiologic effects and measurement of carbon dioxide and oxygen levels during qualitative respirator fit testing. J. Chem. Health Saf. 13: 22-28.
327. International Organization for Standardization (2002). Ergonomics of Human-System Interaction: Usability Methods Supporting Human-Centred Design. ISO/TR 16982:2002.
328. International Organization for Standardization (2010). Ergonomics of Human-System Interaction: Specification for the Process Assessment of Human-System Issues. ISO/TS 18152:2010.
329. International Organization for Standardization (in preparation). Respiratory Protective Devices: Human Factors; Part 8: Ergonomic Factors. ISO/TS 16976-8 (draft).
330. Krausman A.S., Nussbaum M.A. (2007). Effects of wearing chemical protective clothing on text entry when using wearable input devices. Int. J. Ind. Ergonom. 37: 525-530.
331. Avon Protection, 50 Series Protective Mask. http://www.avon-protection.com/Downloads/protection-us-datasheets/50-serieslow.pdf. Accessed Jan. 2, 2011.
332. North Atlantic Treaty Organization (1984). Aircrew Nuclear Flash Blindness Protection. STANAG 3830 (Ed. 1). Brussels: Military Agency for Standardization. NATO unclassified.
333. Caretti D.M., Strickler L.C. (2003). Speech intelligibility during respirator wear: influences of respirator speech diaphragm size and background noise. Am. Ind. Hyg. Assoc. J. 64: 846-850.
334. Johnson A.T., Scott W.H., Laustead C.G., Coyne K.M., Sahota M.S., Johnson M.M., YeniKomshian G., Caretti D.M. (2000). Communications using a telephone while wearing a respirator. Am. Ind. Hyg. Assoc. J. 61: 254-267.
335. McMahon R.W., Stemann K.M. (1991). Speech Intelligibility with an Amplified Voice-mitter Designed for the M40 Series Protective Mask. USAHEL Technical Note 3-01. Aberdeen Proving Ground, MD: U.S. Army Human Engineering Laboratory.
336. North Atlantic Treaty Organization (1999). Personnel Identification while in NBC Individual Protective Equipment (IPE). STANAG 2429. Brussels: Military Agency for Standardization. NATP/PfP unclassified.
337. Gudgin Dickson E.F., Bodurtha P., Fedele P. (2005). Predicting protection performance behaviour of protective clothing against airborne contaminants: modeling and measurement. 1st Int. Conf. on Individual Protective Equipment, Bath, UK.
338. Lai M. (2007). Usability assessment and redesign of BoSS-21 user interface. B.A.Sc. thesis, University of Toronto, Toronto, ON, Canada.
339. North Atlantic Treaty Organization (2000). Nuclear, Biological, and Chemical (NBC) Defense Factors in the Design, Testing and Acceptance of Military Equipment. STANAG 4521 (Ed. 1). Brussels: Military Agency for Standardization. NATO unclassified.
340. Black S., Kapsall V., Bougourd J., Geesin F. (2005). Fashion and function: factors affecting the design and use of protective clothing. In: Scott R.A. (Ed.), Textiles for Protection, pp. 60-89. Boca Raton, FL: CRC Press.
341. Geer L., Brasser P., van Gulijk C., van der Gijp S. (2005). The power of CFD in modeling of protective equipment. 1st Int. Conf. on Individual Protective Equipment, Bath, UK.
342. Hill R.W., Barry J.J. (2004). New developments in the assessment of protective fabrics using computational models. Int. Nonwovens J., Winter, pp. 22-30.
343. Barry J.J., Hill R. W., Brasser P., Sobera M., Kleijn C., Gibson P. (2003). Computational fluid dynamics modeling of fabric systems for intelligent garment design. MRS Bull. 28: 568-573.
344. Brasser P., van Houwelingen T. (2008). Theoretical and experimental study of vapor deposition onto a dressed body part. AIChE J. 54: 844-849.
345. Sobera M.P., Kleijn C.R., Brasser P., van den Akker H.E.A. (2004). A multi-scale numerical study of the flow, heat, and mass transfer in protective clothing. Lect. Notes Comput. Sci. 3039: 637-644.
346. Lodewyckx P., Wood G.O., Ryu S.K. (2004). The Wheeler-Jonas equation: a versatile tool for the prediction of carbon bed breakthrough times. Carbon 42: 1351-1355.
347. Liu Z.G., Wang P.K. (1997). Pressure drop and interception efficiency of multifiber filters. Aerosol Sci. Technol. 26: 313-325.
348. Liu X.L.G., Wang P.K. (1996). Numerical investigation of viscous flow fields around multiber filters. Aerosol Sci. Technol. 25: 375-391.
349. Shapiro M. (1996). An analytical model for aerosol filtration by nonuniform filter media. J. Aerosol Sci. 27: 263-280.
350. Maschio C., de Arruda A.C.F. (2001). Modeling of the efficiency of fibrous filters through numerical simulation and x-ray tomography. Adv. Powder Technol. 23: 311-329.
351. Dhaniyala S., Liu B.Y.H. (2001). Theoretical modeling of filtration by nonuniform fibrous filters. Aerosol Sci. Technol. 34: 170-178.
352. Quintard M., Whitaker S. (1995). Aerosol filtration: an analysis using the method of volume averaging. J. Aerosol Sci. 26: 1227-1255.
353. Przekop R., Moskal A., Gradon L. (2003). Lattice-Boltzmann approach for description of the structure of deposited particulate matter in fibrous filters. J. Aerosol Sci. 34: 133-147.
354. Zhong W., Pan N. (2007). Aerosol filtration by fibrous filters: a statistical mechanics approach. Text. Res. J. 77: 284-289.
355. Wang Q., Maze B., Tafreshi H.V., Pourdeyhimi B. (2006). Approaches for predicting collection efficiency of fibrous filters. J. Text. Apparel Technol. Manage. 5: 1-7.
356. Fedele P.D. (1992). Model of aerosol protection offered by permeable protective garments. In: McBriaty J.P., Henry N.W. (Eds.), Performance of Protective Clothing, Vol. 4. ASTM STP 1133. Philadelphia: American Society for Testing and Materials.
357. Extrand C.W. (2004). Criteria for ultralyophobic surfaces. Langmuir 20: 5013-5018.
358. Extrand C.W. (2006). Designing for optimum liquid repllency. Langmuir 22:1711-1714.
359. Semple S., Brouwer D.H., Dick F., Cherrie J.W. (2001). A dermal model for spray painters: Part II. Estimating the deposition and uptake of solvents. Ann. Occup. Hyg. 45: 25-33.
360. Van Houwelingen T., Gudgin Dickson E., Tremblay-Lutter J. (2004). Human-mannequin comparisons in testing NBC protective clothing. 8th Int. Symp. on Protection Against Chemical and Biological Warfare Agents, Gothenburg, Sweden.
361. Matsumura Y., Suzuki K., Ogowa A., Iijima N. (2008). Robotic torso for inward leakage test of PAPR. 14th Meeting of the International Society for Respiratory Protection, Dublin, Ireland.
362. Fiala D., Psikuta A., Jendritzky G., Paulke S., Nelson D.A., van Marken Lichtenbelt W.D., Frijns A.J.H. (2010). Physiological modeling for technical, clinical and research applications. Front. Biosci. S2:939-968.
363. The Technical Cooperation Program Human Resources and Performance Group (2004). Human Performance Modeling in Military Simulation: Current State of the Art and the Way Ahead (2002 TTCP HUM Group Meeting). U.S. Pentagon Report A144924.
364. Anthony T.R., Flynn M.R. (2006). CFD model for a 3-D inhaling mannequin: verification and validation. Ann. Occup. Hyg. 50: 157-173.
365. Yang T., Cropper P.C., Cook M.J., Yousaf R., Fiala D. (2007). A new simulation system to predict human-environment thermal interactions in naturally ventilated buildings. Proc. Building Simulation (International Conference, Beijing), pp. 751-756.
366. Mao A. (2009). Computer-aided clothing thermal functional engineering design. Ph.D. dissertation, Polytechnic University, Hong Kong.
367. Lin G., Meng S., Wang R., Luo X., Li Y. (2011). The heat and moisture transfer balance theory of garment simulation. J. Comput. Appl. Math. 236: 980-987.
368. International Organization for Standardization (1993). Textiles: Physiological Effects-Measurement of Thermal and Water-Vapour Resistance Under Steady-State Conditions (Sweating Guarded-Hotplate Test). ISO 11092:1993.
369. Blanchard L., Santee W. (2008). Comparison of USARIEM Heat Strain Decision Aid to Mobile Decision Aid and Standard Army Guidelines for Warm Weather Training. USARIEM Technical Report T08-07.
370. Endrusick T.L., Stroschein L.A., Gonzalez R.R., US Army Research Institute of Environmental Medicine, Biophysics and Biomedical Modeling Division. http://www.usariem.army.mil/pages/ThermalManikinHistory.htm. Accessed May 7, 2011.
371. Individual Protective Ensemble Mannequin system. http://www.mtnw-usa.com/measurement-expertise/blog/tag/thermal-testing/. Accessed July 2010.
372. Psikuta A. (2009). Development of an "artificial human" for clothing research. Ph.D. dissertation, De Monfort University, Switzerland.
373. Psikuta A., Richards M., Fiala D. (2008). Single-sector thermophysiological human simulator. Physiol. Meas. 20: 181-192.
374. Fontana M., Rizzi C., Cugini U. (2004). Physics-based modelling and simulation of functional cloth for virtual prototyping applications. SM '04 Proc. 9th ACM Symp. on Solid Modeling and Applications. Aire-la-Ville, Switzerland: Eurographics Association.
375. Butler K.M. (2008). A computational method for evaluating fit. 14th Meeting of the International Society for Respiratory Protection, Dublin, Ireland.
376. Duncan E.J.S., Kournikakis B., Ho J., Hill I. (2009). Pulmonary deposition of aerosolized Bacillus atrophaeus in a swine model due to exposure from a simulated anthrax letter incident. Inhal. Toxicol. 21: 141-152.
377. Hatanaka T., Inuma M,. Sugibayashi K., Morimoto Y. (1990). Prediction of skin permeability of drugs: I. Comparison with artificial membrane. Chem. Pharm. Bull. (Tokyo) 38: 3452-3859.
378. Swift D.L., Proctor D.F. (1988). A dosimetric model for particles in the respiratory tract above the trachea. Ann. Occup. Hyg. 32(Suppl. 1):1035-1044.
379. Bailey M.R. (1994). The new ICRP model for the respiratory tract. Radiat. Prot. Dosim. 53: 107-114.
380. Brown J.S. (2005). Particle inhalability at low wind speeds. Inhal. Toxicol. 17: 831-837.
381. Moody R.P., Akram M., Dickson E., Chu I. (2007). In vitro dermal absorption of methyl salicylate, ethyl parathion, and malathion: first responder safety. J. Toxicol. Environ. Health A 70: 985-999.
382. Yannas I.V., Burke J.F. (1980). Design of an artificial skin: I. Basic design principles. J. Biomed. Mater. Res. 14: 65-81.
383. Stone W.L., Paromov V., Yang H. (2007). Topical Application of Liposomal Antioxidants for Protection Against CEES Induced Skin Damage. U.S. Pentagon Report A418074.
384. Danon A., Ben-Shimon S., Ben-Zvi Z. (1986). Effect of exercise and heat exposure on percutaneous absorption of methyl salicylate. Eur. J. Clin. Pharmacol. 31: 49-52.
385. Duncan E.J.S., Brown A., Lundy P., Sawyer T.W., Hamilton M., Hill I., Conley J.D. (2002). Site-specific percutaneous absorption of methyl salicylate and VX in domestic swine. J. Appl. Toxicol. 22: 141-148.
386. Flynn M.R., Koto Y., Fent K., Nylander-French, L.A. (2006). Modeling dermal exposure: an illustration for spray painting applications. J. Occup. Environ. Hyg. 3: 475-480.
387. Byrne M.A., Bell K.F., Goddard A.J.H., Lange C., Roed J. (1995). Aerosol deposition velocity measurements to human body surfaces. J. Aerosol Sci. 26:1315-1315(1).
388. Andersson K.G., Fogh C.L., Byrne M.A., Roed J., Goddard A.J.H., Hotchkiss S.A. (2002). Radiation dose implications of airborne contaminant deposition to humans. Health Phys. 82: 226-232.
389. Fogh C.L., Andersson K.G. (2000). Modelling of skin exposure from distributed doses. Ann. Occup. Hyg. 44: 520-532.
390. Byrne M.A. (2009). Contamination of humans: in the respiratory tract and on body surfaces. In: Andersson K.G. (Ed.), Airborne Radioactivity in Contaminated Areas: Radioactivity in the Environment, Vol. 15, pp. 77-103. Amsterdam: Elsevier.
391. Schneider T., Bohgard M., Gudmundsson A. (1994). A semiempirical model for particle deposition onto facial skin and eyes: role of air currents and electric fields. J. Aerosol Sci. 25: 583-593.
392. American Society for Testing and Materials (2011). Terminology Relating to Protective Clothing. ASTM F1494-03.
393. International Organization for Standardization (2004). Protective Clothing: Vocabulary. ISO/TR 11610:2004.
394. Japanese Institute of Standards (2006). Glossary of Terms for Respiratory Protective Devices. JIS T 8001:2006.
395. International Organization for Standardization (2010). Respiratory Protective Devices: Terms, Definitions, Graphical Symbols and Units of Measurement. ISO 16972:2010.
396. British Standards Institution (2005). Personal Eye-Protection. Vocabulary. BS EN 165:2005.
397. North Atlantic Treaty Organization (2003). Glossary of NBC Terms and Definitions. AAP-21(A). Brussels: Military Agency for Standardization. NATO unclassified.
398. North Atlantic Treaty Organization (1981). NBC Protective Mask and Filter Canister Screw Threads. STANAG 4155. Brussels: Military Agency for Standardization. NATO unclassified.
399. International Organization for Standardization (draft in preparation). Respiratory Protective Devices: Performance Requirements; Part 3: Thread Connection. ISO/FDIS 17420-3.
400. Gamage B., Moore D., Copes R., Yassi A., Bryce E. (2005). Protecting health care workers from SARS and other respiratory pathogens: a review of the infection control literature. Am. J. Infect. Control 33: 114-121.
401. Loeb M., Dafoe N., Mahony J., John M., Sarabia A., Glavin V., Webby R., Smieja M., Earn D.J.D., Chong S., Webb A., Walter S.D. (2009). Surgical mask vs. N95 respirator for preventing influenza among health care workers: a randomized trial. J. Am. Med. Assoc. 302: 1865-1871.
402. Lee S.-A., Grinshpun, S.A., Reponen T. (2008). Respiratory performance offered by N95 respirators and surgical masks: human subject evaluation with NaCl aerosol representing bacterial and viral particle size range. Ann. Occup. Hyg. 52: 177-185.
403. Duling M.G., Lawrence R.B., Slaven J.E., Coffey C.C. (2007). Simulated workplace protection factors for half-facepiece respiratory protective devices. J. Occup. Environ. Hyg. 4: 420-431.
404. Oberg T., Brosseau L. (2008). Surgical mask filter and fit performance. Am. J. Infect. Control 36: 276-282.
405. Alvey J. (2008). Breathing apparatus. U.S. Patent 7,380,551 B2.
406. Richardson A.W., Hofacre K.C., Gardner P.D. (2008). Technology Survey for Enhancement of Chemical, Biological, Radiological, and Nuclear Respiratory Protection. U.S. Army Edgewood Chemical Biological Center Report ECBC-CR-094.
407. International Organization for Standardization (1998). Protective Clothing: General Requirements. ISO 13688:1998.
408. Committee for European Norms (2003). Protective Clothing: General Requirements. EN 340:2003.
409. National Fire Protection Association (2005). Standard on Vapor-Protective Ensembles for Hazardous Materials Emergencies. NFPA 1991-05.
410. National Fire Protection Association (2012). Standard on Protective Ensembles for Chemical/Biological Terrorism Incidents. NFPA 1994-12.
411. Marshall S.M., Fedele P.D., Lake W.A. (2001). Guidelines for Incident Commander's use of Firefighter Protecive Ensemble (FFPE) with Self-Contained Breathing Apparatus (SCBA) for Rescue Operations During a Terrorist Chemical Agent Incident. SBCCOM final report, Aug. 1999. Report A237783.
412. National Fire Protection Association (2007). Standard on Protective Ensembles for Structural Firefighting and Proximity Firefighting. NFPA 1971-07.
413. Dickson E.F., Tremblay J. (2010). Double plus good. CBRNE World, Winter, pp. 52-54.
414. International Organization for Standardization (2004). Protective Clothing for Use Against Solid Particulates; Part 1: Performance Requirements for Chemical Protective Clothing Providing Protection to the Full Body Against Airborne Solid Particulates (Type 5 Clothing). ISO 13982-1:2004.
415. U.S. Department of Justice (2010). CBRN Protective Ensemble Standard for Law Enformcement. NIJ Standard 0116.00.
416. Protect and detect: enhancing CBRN readiness. (2011). Asian Military Rev. 19 (online).
417. Beardall T., Bodurtha P., Daynard D., Gosselin A., Dickson E., Harrison B. (2008). Approaches to field expedient determination of protection for first responders. 14th Meeting of the International Society for Respiratory Protection Dublin, Ireland.
418. Gudgin Dickson E.F., Bodurtha P., Beardall T., Harrison B., Daynard D. (2011). Respiratory Protection Program for CBRN Protection: Summary Report. Royal Military College of Canada Report RMCC TR CPT-1101. Kingston ON, Canada: Royal Military College of Canada.
419. Favas G. (2005). End of Service Life Indicator (ESLI) for Respirator Cartridges-Part I: Literature Review. Defense Science and Technology Organization, Australia.
420. Friday D., Shrewsbury M., Peterson G.W. (2008). Residual Life Indicator for Physical Adsorption Capacity of NBC Filters-Part 1: Acetone Vapor Pulses and the Effect of Moisture Content on Retention Characteristics. U.S. Pentagon Report A806384.
421. Watson E., Caraher T.W., Bennet M.R., Roehl J.E., Greenfield M.J., Ericsson A.J. (2004). Residual life indicator. U.S. Patent 6,701,864.
422. I-bodi. http://www.i-bodi.com/Products.aspx. Accessed June 2011.
423. Gudgin Dickson E., Tremblay-Lutter J., Prior L., Brown J., Gibson-Harris J. 2010. Human-mannequin comparisons in testing NBC protective clothing: a next generation mannequin system. 10th Int. Symp., on Protection Against Chemical and Biological Warfare Agents, Stockholm Sweden.
424. American Society for Testing and Materials (2006). Standard Guide for Selection of Chemicals to Evaluate Protective Clothing Materials. ASTM F1001-99a.
425. National Institute of Occupational Safety and Health (2003). Full facepiece air purifying respirators (APR) to protect emergency response workers against CBRN agents (online).
426. International Organization for Standardization (2001). Determination of Resistance of Protective Clothing Materials to Permeation by Liquids and Gases. ISO 6529:2001.
427. American Society for Testing and Materials (2003). Standard Classification System for Chemicals According to Functional Groups. ASTM F1186-03.
428. Wu J., Hammarstrom L.-G., Claesson O., Fangmark I., (2003). Modeling the influence of physico-chemical properties of volatile organic compounds on activated carbon adsorption capacity. Carbon 4: 1322-1325.
429. Coon P.A., Famini G.R., White W.E, Thornton R.C. (1988). Data Base Users' Guide for the Chemical Agent Simulant Data Center, Special Publication. CRDEC-SP-88032. Aberdeen Proving Ground, MD: Chemical Research Development and Engineering Center.
430. Seitzinger A.T., Grasso P.S., White W.E., Stuempfle A.K., Birenzvige A. (1990). Use of Methyl Salicylate as a Trialing Chemical Agent Simulant, U.S. Department of Defense Report A373322.
431. American Society for Testing and Materials (2001). Standard Test Method for Evaluating the Bacterial Filtration Efficiency (BFE) of Medical Face Mask Materials, Using a Biological Aerosol of Staphylococcus aureus. ASTM F2101-01.
432. Greenberg D.L., Busch J.D., Keim P., Wagner D.M. (2010). Identifying experimental surrogates for anthracis spores: a review. Invest. Genet. 1: 1-12.
433. Carrera, M., Zandomeni, R., Fitzgibbon, J., Sagripanti, J.-L. (2007). Difference between the spore sizes of Bacillus anthracis and other Bacillus species. J. Appl. Microbiol. 102: 303-312.
434. American Society for Testing and Materials (2003). Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Blood-Borne Pathogens Using Phi-X174 Bacteriophage as a Test System. ASTM F 1671-03.
435. International Organization for Standardization (1997). Road Vehicles: Test Dust for Filter Evaluation; Part 1: Arizona Test Dust. ISO 12103-1:1997.
436. Martin C.W., Golden J. (2009). Simulant of radiological contamination. U.S. Patent Appl. 20090057622.
437. Fedele P., Georgopoulos P., Shade P., Lioy P., Hodgson M., Brown M.A. (2004). InHospital Response to External Chemical Emergencies: Personal Protective Equipment, Training, Site Operations Planning, and Medical Programs: Technical Report-Final Draft. Edgewood, MD: US Army Edgewood Chemical Biological Center.
438. Ho J., Duncan S. (2005). Estimating aerosol hazards from an anthrax letter. Aerosol Sci. 36: 701-719.
439. Reshetin V.P., Regens J.L. (2003). Simulation modeling of anthrax spore dispersion in a bioterrorism incident. Risk Anal. 23: 1135-1145.
440. Reshetin V.P., Regens J.L. (2004). Estimating Bacillus anthracis spore dispersion in a high-rise building. J. Eng. Phys. Thermophys. 77: 1-10.
441. Bourget S., Ohayon D., Tanelli J., Gendron A.M., Messier P.J. (2004). Microbiocidal filtering media for individual protection: facemasks and canisters. 8th Int. Symp. on Protection Against Chemical and Biological Warfare Agents, Gothenburg, Sweden.
442. Duncan S., Ho J. (2008). Estimation of viable spores in Bacillus atrophaeus (BG) particles of 1to9 [H9262]m size range. CLEAN-Soil, Air, Water 36: 584-592.
443. Heimbuch B.K., Kinney K.R., Nichols R.K., Wander J.D. (2008). The Dry Aerosol Deposition Device (DADD): An Instrument for Depositing Microbial Aerosols onto Surfaces. Air Force Research Laboratories AFRL-RX-TY-TR-2008-4502.
444. Woo M.-H., Hsu Y.-M., Wu, C.-Y., Heimbuch, B., Wander, J. (2010). Method for contamination of filtering facepiece respirators by deposition of MS2 viral aerosols. J. Aerosol Sci. 41: 944-952.
445. International Atomic Energy Agency. http://www.iaea.org/Publications/Factsheets/English/ines.pdf. Accessed Dec. 31, 2011.
446. Gao P., King W.P., Shaffer, R. (2007). Review of chamber design requirements for testing of personal protective clothing ensembles. J. Occup. Environ. Hyg. 4: 562-571.
447. Stull J.O., Stull G.G. (2010). Risk-Based Protective Clothing Material Permeation Criteria, Contract W91CRB-07-C-0006. Project Final Report for U.S. Technical Support Working Group.
448. Kowalski W.J., Bahnfleth W.P., Whittam T.S. (1999). Filtration of airborne microorganisms: modeling and prediction. ASHRAE Trans. Res. 4273: 4-17.
449. American Society for Testing and Materials (2011). Standard Test Method for Man-inSimulant Test (MIST) for Protective Ensembles. ASTM F2588-11.
450. Lundgren L., Skare L., Lidén C. (2006). Measuring dust on skin with a small vacuuming sampler: a comparison with other sampling techniques. Ann. Occup. Hyg. 50:95-103.
451. Cherrie J.W., Brouwer D.H., Roff M., Vermeulen R., Kromhour H. (2000). Use of qualitative and quantitative fluorescence techniques to assess dermal exposure. Ann. Occup. Hyg. 44: 519-522.
452. American Society for Testing and Materials (2007). Standard Test Method for Resistance of Protective Clothing Materials to Permeation by Liquids or Gases Under Conditions of Continuous Contact. ASTM F739-07.
453. Baron PA, Willeke K. (Eds.) (2005). Aerosol Measurement: Principles, Techniques, and Applications 2nd ed. Hoboken, NJ: Wiley.
454. Hesketh H.E. (1977). Fine Particles in Gaseous Media. Ann Arbor, MI: Ann Arbor Science.
455. Volckens J., Peters T.M. (2005). Counting and particle transmission efficiency of the aerodynamic particle sizer. J. Aerosol Sci. 36: 1400-1408.
456. May K.R. (1973). The Collison nebulizer: description, performance and application. J. Aerosol Sci. 4: 235-238.
457. Mainelis G., Berry D., An H.R., Yao M., DeVoe K., Fennell D.E., Jaeger R. (2005). Design and performance of a single-pass bubbling bioaerosol generator. Atmos. Environ. 39: 3521-3533.
458. Andersen A.A. (1958). A new sampler for the collection sizing and enumeration of viable airborne particles. J. Bacteriol. 76: 471-484.
459. Ioannou C.J., Hanlon G.W., Denyer S.P. (2007). Action of disinfectant quaternary ammonium comnpounds against Staphylococcus aureus. Antimicro. Agents Chemother. 51: 296-306.
460. Richardson G.S., Winskill J., McLeod A. (2004). The development of an improved system to assess respirator performance on the battlefield. 8th Int. Symp. on Protection Against Chemical and Biological Warfare Agents, Gothenburg, Sweden.
461. Christiansen A.F., Richardson G.S., Steeenweg L., van der Gijp S., Nijboer Br. (2005). Test of military respirators in the field. 1st Int. Conf. on Individual Protective Equipment, Bath, UK.
462. Duncan E.J.S., Gudgin Dickson E.F. (2003). A new whole-body vapor exposure chamber for protection performance research on chemical protective ensembles. Am. Ind. Hyg. Assoc. J. 64: 212-221.
463. Dickson E., Duncan S., Chu I., Birkis U. (2003). Risks to first responders at a toxic chemical terrorist incident: methods for quantifying cutaneous exposure and assessing risk. Proc. CBMTS 2nd World Congress on CBRN Terrorism, Dubrovnik, Croatia.
464. Gudgin Dickson E., Fedele P., Marshall S. (2004). Quantifying cutaneous exposure to first responders responding to a liquid chemical agent incident: methods and results. 8th Int. Symp. on Protection Against Chemical and Biological Warfare Agents, Gothenburg, Sweden.
465. U.S. Code of Federal Register Title 42-Public Health, Chapter I-Public Health Service, Department of Health and Human Services, Subchapter G-Occupational Safety and Health Research and Related Activities, Part 84-Approval of Respiratory Protective Devices.
466. U.S. Department of Defense (1995). Filter Units, Protective Clothing, Gas-Mask Components and Related Products: Performance Test Methods (Version 01), Method 102.9.1.
467. British Standards Institution (2009). High Efficiency Air Filters (EPA, HEPA and ULPA): Classification, Performance Testing, Marking. BS EN 1822-1:2009.
468. British Standards Institution (2009). High Efficiency Air Filters (EPA, HEPA and ULPA): Testing Flat Sheet Filter Media. BS EN 1822-3:2009.
469. British Standards Institution (2009). High Efficiency Air Filters (EPA, HEPA and ULPA): Aerosol Production, Measuring Equipment, Particle Counting Statistics. BS EN 1822-2:2009.
470. British Standards Institution (2009). High Efficiency Air Filters (EPA, HEPA and ULPA): Determining Leakage of Filter Elements (Scan Method). BS EN 1822-4:2009.
471. British Standards Institution (2009). High Efficiency Air Filters (EPA, HEPA and ULPA): Determining the Efficiency of Filter Elements. BS EN 1822-5:2009.
472. Hill J.S., Hanley J.T., Elion J.M., Owen M.K., Clayton A.C. (2006). An Evaluation of Re-aerosolization from Contaminated Garments During Doffing. Contract W911S6-05-D-0002.
473. Donaldson K., Li X.Y., MacNee W. (1998). Ultrafine (nanometer) particle mediated lung injury. J. Aerosol Sci. 7: 533-560.
474. Waters K.M., Masiello L.M., Zangar R.C., Tarasevich B.J., Karin N.J., Quesenberry R.D., Bandyopadhyay S., Teeguarden J.G., Pounds J.G., Thrall B.D. (2009). Macrophage responses to silica nanoparticles are highly conserved across particle sizes. Toxicol. Sci. 107: 553-569.
475. Touch-Test Sensory Evaluators. http://www.touchtest.com.
476. Lafayette Instrument (2002). Purdue Pegboard Test: user instructions. http://www.siinstruments.com/files/catalog/Download%20Centre/Lafayette/Operating%20Manuals/lafayette32020purduepegboardtestmanual.pdf.
477. American Society for Testing and Materials (2010). Standard Test Method for Evaluation of Glove Effects on Wearer Hand Dexterity Using a Modified Pegboard Test. ASTM F2010/F2010M-10.
478. American Society for Testing and Materials (1996). Standard Method for Static Coefficient of Shoe Sole and Heel Materials as Measured by the James Machine. ASTM F489-96.
479. Kawabata S., Niwa M., Wang, F. (1994). Objective hand measurement of nonwoven fabrics: Part I. Development of the equations. Text. Res. J. 64: 597-610.
480. Cardello A.V., Winterhalter C., Schutz H.G. (2003). Predicting the handle and comfort of military clothing fabrics from sensory and instrumental data: development and application of new psychophysical methods. Text. Res. J. 73: 221-237.
481. Pan N. (2007). Quantification and evaluation of human tactile sense towards fabrics. Int. J. Des. Nat. 1: 48-60.
482. Marzulli F.N., Maibach H.I. (1973). Antimicrobials: experimental contact sensitization in man. J. Soc. Cosmet. Chem. 24: 399-421.
483. Oeko-Tex Standard 100. http://www.oekotex.com/OekoTex100PUBLIC/content5.asp?area=hauptmenue&site=oekotexstandard100&cls=02. Accessed Jan. 28, 2012.
484. American Association of Textile Chemists and Colorists (2010). Absorbency of Textiles. AATCC 79-2010.
485. Pinkus A.R., Task H.L., Hausmann M.A., Barbato M.H., Goodyear C.D. (2004). Dynamic Visual Acuity Assessment Through Visors. U.S. Pentagon Report A521824.
486. Pickering C. (2008). Fogging and respiratory simulation system. 14th Meeting of the International Society for Respiratory Protection, Dublin, Ireland.
487. House A.S., Williams C.E., Hecker M.H.L., Kryter K.D. (1965). Articulation-testing methods: consonantal differentiation with a closed-response set. J. Acoust. Soc. Am. 37: 158-166.
488. Coyne K.M., Barker D.J., Eshbaugh J.P. (2008). Automated Speech Intelligibility System for Head-borne Personal Protective Equipment: Proof of concept. U.S. Pentagon Report A100084.
489. Coyne K.M., Johnson A.T., Yeni-Komshian G.H., Dooly C.R. (1998). Respirator performance ratings for speech intelligibility. Am. Ind. Hyg. Assoc. J. 59: 257-360.
490. American National Standards Institute (2007). Methods for the Calculation of the Speech Intelligibility Index. ANSI S3.5-1997 (R2007).
491. Acoustical Society of America. http://www.sii.to/html/programs.html.
492. International Organization for Standardization (2004). Ergonomics of the Thermal Environment: Risk Assessment Strategy for the Prevention of Stress or Discomfort in Thermal Working Conditions. ISO 16265:2004.
493. International Organization for Standardization (2008). Ergonomics of the Thermal Environment: Cold Workplaces-Risk Assessment and Management. ISO 15743:2008.
494. Holmér I. (2004). Thermal manikin history and applications. Eur. J. Appl. Physiol. 92: 614-618.
495. Richards M.G.M., Mattle N.G. (2001). A sweating agile thermal manikin (SAM) developed to test complete clothing systems under normal and extreme conditions. RTO HFM Symposium "Blowing Hot and Cold: Protecting Against Climatic Extremes." RTO-MP-076.
496. Warmé-Janville B., Pélicand J.-Y. (2001). Assessment of clothing permeation using an instrumented heated and sweating manikin. RTO HFM Symposium "Blowing Hot and Cold: Protecting Against Climatic Extremes." RTO-MP-076.
497. Fan J., Qian X. (2004). New functions and applications of Walter, the sweating fabric manikin. Eur. J. Appl. Physiol. 92: 641-644.
498. Wang F., Gao C., Kuklane K., Holmér I. (2011). Determination of clothing evaporative resistance on a sweating thermal manikin in an isothermal condition: Heat loss method or mass loss method? Ann. Occup. Hyg. 55: 775-783.
499. Forsberg K., Mansdorf S.Z. (2007). Quick Selection Guide to Chemical Protective Clothing. Hoboken, NJ: Wiley.
500. Anna D.H. (Ed.) (2003). Chemical Protective Clothing. Fairfax VA: Americal Industrial Hygiene Association.
501. American National Standards Institute (1992). Respiratory Protection Standard. ANSI Z88.2-92.
502. British Standards Institution (2005). Respiratory Protective Devices: Recommendations for Selection, Use, Care and Maintenance-Guidance Document. BS EN 529:2005.
503. North Atlantic Treaty Organization AC/225 (Panel VII) (1995). NBC Respirator Triptych D/103. Brussels: Military Agency for Standardization. NATO confidential.
504. North Atlantic Treaty Organization (1991). The Measurement of Protection Provided to the Respiratory Tract and Eyes by Aircrew Equipment Assemblies Against NBC Agents in Particulate, Aerosol and Vapour Form. STANAG 3864. Brussels: Military Agency for Standardization. NATO unclassified.
505. North Atlantic Treaty Organization (2002). NATO Standards of Proficiency for NBC Defense. STANAG 2150 NBC (Ed. 7). Brussels: Military Agency for Standardization. NATO/PfP unclassified.