In situ tooth replica custom implant: A 3-dimensional finite element stress and strain analysis

Journal of Oral Implantology

Volumn 39, Issue 5, 2013, Pages 559-573

  Ghuneim, Wael Aly ^a  

^a Dental Clinic   (Egypt)

Author keywords

3D finite element; Anatomic dental implant; Cortoss; Customimplant; Immediate implant; In situ; Tooth replica dental implant; Tooth substitute

Indexed keywords

BISPHENOL A BIS(2 HYDROXYPROPYL) ETHER DIMETHACRYLATE; CORTOSS;

ARTICLE; BONE PROSTHESIS; BONE REGENERATION; DENTAL PROCEDURE; FINITE ELEMENT ANALYSIS; HUMAN; MANDIBLE; MASTICATION; MATERIALS TESTING; METHODOLOGY; PERIODONTAL LIGAMENT; TOOTH IMPLANT; TOOTH PROSTHESIS;

BISPHENOL A-GLYCIDYL METHACRYLATE; BITE FORCE; BONE SUBSTITUTES; DENTAL IMPLANTS; DENTAL PROSTHESIS DESIGN; DENTAL PROSTHESIS, IMPLANT-SUPPORTED; DENTAL STRESS ANALYSIS; FINITE ELEMENT ANALYSIS; HUMANS; MANDIBLE; MATERIALS TESTING; OSSEOINTEGRATION; PERIODONTAL LIGAMENT; TOOTH, ARTIFICIAL;

EID: 84886904753     PISSN: 01606972     EISSN: 15481336     Source Type: Journal    
DOI: 10.1563/AAID-JOI-D-10-00142     Document Type: Article

References (71)

1. Ghuneim WA. In situ tooth replica custom implant: rationale, material, and technique. J Oral Implantol. 2010;36:435-450.
2. Anusavice KJ. Mechanical properties of dental materials. In: Anusavice KJ, ed. Phillips? Science of Dental Materials. St Louis, Mo: W.B. Saunders; 2003:73-101.
3. Misch CE. Generic root form component terminology. In: Misch CE, ed. Dental Implant Prosthetics. St Louis, Mo: Elsevier Mosby; 2005:32-52.
4. Pirker W, Kocher A. Immediate, non-submerged, rootanalogue zirconia implant in single tooth replacement. Int J Oral Maxillofac Surg. 2008;37:293-295.
5. Ferreira CF, Magini RS, Sharpe PT. Biological tooth replacement and repair. J Oral Rehabil. 2007;34:933-939.
6. Pomrink GJ, DiCicco MP, Clineff TD, Erbe EM. Evaluation of the reaction kinetics of Cortoss, a thermoset cortical bone void filler. Biomaterials. 2003;24:1023-1031.
7. Gheduzzi S, Webb JJ, Miles AW. Mechanical characterisation of three percutaneous vertebroplasty biomaterials. J Mater Sci Mater Med. 2006;17:421-426.
8. Erbe EM, Clineff TD, Gualtieri G. Comparison of a new bisphenol-a-glycidyl dimethacrylate-based cortical bone void filler with polymethyl methacrylate. Eur Spine J. 2001;10:147-152.
9. Beckmann J, Ferguson SJ, Gebauer M, Luering C, Gasser B, Heini P. Femoroplasty-augmentation of the proximal femur with a composite bone cement; feasibility, biomechanical properties and osteosynthesis potential. Med Eng Phys. 2007;29:755-764.
10. Heini PF, Berlemann U. Bone substitutes in vertebroplasty. Eur Spine J. 2001;10:205-213.
11. Middleton ET, Rajaraman CJ, O?Brien DP, Doherty SM, Taylor AD. The safety and efficacy of vertebroplasty using Cortoss cement in a newly established vertebroplasty service. Br J Neurosurg. 2008;22:252-256.
12. Palussière J, Berge J, Gangi A, Cotten A, Pasco A, Bertagnoli R. Clinical results of an open prospective study of a bis-GMA composite in percutaneous vertebral augmentation. Eur Spine J. 2005;14:982-991.
13. Sanus GZ, Tanriverdi T. Anterior skull base fractures: extradural surgical approach. J Craniofac Surg. 2009;20:270.
14. Sanus GZ, Tanriverdi T, Ulu MO, Kafadar AM, Tanriover N, Ozlen F. Use of Cortoss as an alternative material in calvarial defects: the first clinical results in cranioplasty. J Craniofac Surg. 2008;1:88-95.
15. Smit RS, van der Velde D, Hegeman JH. Augmented pin fixation with Cortoss for an unstable AO-A3 type distal radius fracture in a patient with a manifest osteoporosis. Arch Orthop Trauma Surg. 2008;128:989-993.
16. Andreassen GS, Høiness PR, Skraamm I, Granlund O, Engebretsen L. Use of a synthetic bone void filler to augment screws in osteopenic ankle fracture fixation. Arch Orthop Trauma Surg. 2004;124:161-165.
17. Ilan DI, Ladd AL. Bone graft substitutes. Oper Tech Plast Reconstr Surg. 2002;9:151-160.
18. Adell R, Lekholm U, Rockler B, Bra°nemark PI. A 15-year study of osseointegrated implants in the treatment of the edentulous jaw. Int J Oral Surg. 1981;10:387-416.
19. Branemark PI. Introduction to osseointegration. In: Bra°nemark, Zarb, Albrektsson. Tissue-Integrated Prostheses: Osseointegration in Clinical Dentistry. Chicago, Ill: Quintessence; 1985:11-76.
20. Ten Cate AR. Biological determinants in implant design. Int Dent J. 1989;39:108-112.
21. Lekic P, McCulloch CA. Periodontal ligament cell population: the central role of fibroblasts in creating a unique tissue. Anat Rec. 1996;245:327-341.
22. Saito A, Saito E, Kawanami M, Shimada A. Healing in transplanted teeth with periodontal ligament cultured in vitro. Cell Transplant. 2003;12:519-525.
23. Pohl Y, Filippi A, Kirschner H. Results after replantation of avulsed permanent teeth. II. Periodontal healing and the role of physiologic storage and antiresorptive-regenerative therapy. Dent Traumatol. 2005;21:93-101.
24. Kontonasaki E, Sivropoulou A, Papadopoulou L, Garefis P, Paraskevopoulos K, Koidis P. Attachment and proliferation of human periodontal ligament fibroblasts on bioactive glass modified ceramics. J Oral Rehabil. 2007;34:57-67.
25. Mengel R, Schreiber D, Flores-de-Jacoby L. Bioabsorbable membrane and bioactive glass in the treatment of intrabony defects in patients with generalized aggressive periodontitis: results of a 5-year clinical and radiological study. J Periodontol. 2006;77:1781-1787.
26. Ash MM. The permanent mandibular premolars. In: Wheeler?s Dental Anatomy, Physiology and Occlusion. Philadelphia, Pa: W.B. Saunders; 1993:218-240.
27. Ash MM. Occlusion. In: Wheeler?s Dental Anatomy, Physiology and Occlusion. Philadelphia, Pa: W.B. Saunders; 1993:414-470.
28. Proffit WR, Fields HW, eds. The biological basis of orthodontic therapy. In: Contemporary Orthodontics. St Louis, Mo: Mosby; 1999:296-325.
29. Anderson DJ. Measurement of stress in mastication. J Dent Res. 1956;35:664-670.
30. Kinney JH, Marshall SJ, Marshall GW. The mechanical properties of human dentin: A critical review and re-evaluation of the dental literature. Crit Rev Oral Biol Med. 2003;14:13-29.
31. Ugural AC, Fenster SK. Advanced Strength and Applied Elasticity. 4th ed. Upper Saddle River, NJ: Prentice Hall; 2003.
32. Woda A, Foster K, Mishellany A, Peyron MA. Adaptation of healthy mastication to factors pertaining to the individual or to the food. Physiol Behav. 2006;89:28-35.
33. Kawaguchi T, Kawata T, Kuriyagawa T, Sasaki K. In vivo 3- dimensional measurement of the force exerted on a tooth during clenching. J Biomech. 2007;40:244-251.
34. Mericske-Stern R, Zarb GA. In vivo measurements of some functional aspects within mandibular fixed prostheses supported by implants. Clin Oral Implants Res. 1996;7:153-162.
35. Stegaroiu R, Khraisat A, Nomura S, Miyakawa O. Influence of superstructure materials on strain around an implant under two loading conditions: A technical investigation. Int J Oral Maxillofac Implants. 2004;19:735-742.
36. Saab XE, Griggs JA, Powers JM, Engelmeier RL. Effect of abutment angulation on the strain on the bone around an implant in the anterior maxilla: A finite element study. J Prosthet Dent. 2007; 97:85-92.
37. Zarone F, Apicella D, Sorrentino R, Ferro V, Aversa R, Apicella A. Influence of tooth preparation design on the stress distribution in maxillary central incisors restored by means of alumina porcelain veneers: A 3D-finite element analysis. Dent Mater. 2005;21:1178-1188.
38. Simsxek B, Erkmen E, Yilmaz D, Eser A. Effects of different inter-implant distances on the stress distribution around endosseous implants in posterior mandible: A 3D-finite element analysis. Med Eng Phys. 2006;28:199-213.
39. Geramy A, Morgano SM. Finite element analysis of three designs of an implant-supported molar crown. J Prosthet Dent. 2004;92:434-440.
40. Ballo A, Lassila LV, Narhi T, Vallittu PK. In vitro mechanical testing of glass fiber-reinforced composite used as dental implants. J Contemp Dent Pract. 2008;9(2):41-48.
41. Carranza FA. The periodontal ligament. In: Glickman I, Carranza FA, eds. Glickman?s Clinical Periodontology. Philadelphia, Pa: W.B. Saunders; 1979:33-45.
42. Craig RG, Powers JM, eds. Mechanical properties. Restorative Dental Materials. St Louis, Mo: Mosby; 2002:67-124.
43. Lum LB, Osier JF. Load transfer from endosteal implants to supporting bone: An analysis using statics. Part two: Axial loading. J Oral Implantol. 1992;18:349-353.
44. Rieger MR, Mayberry M, Brose MO. Finite element analysis of six endosseous implants. J Prosthet Dent. 1990;63:671-676.
45. Haimi S, Vienonen A, Hirn M, Pelto M, Virtanen V, Suuronen R. The effect of chemical cleansing procedures combined with peracetic acid-ethanol sterilization on biomechanical properties of cortical bone. Biologicals. 2008;36:99-104.
46. Currey JD, Foreman J, Laketic I, Mitchell J, Pegg DE, Reilly GC. Effects of ionizing radiation on the mechanical properties of human bone. J Orthop Res. 1997;15:111-117.
47. Ohman C, Dall?Ara E, Baleani M, Van Sint Jan S, Viceconti M. The effects of embalming using a 4% formalin solution on the compressive mechanical properties of human cortical bone. Clin Biomech. 2008;23:1294-1298.
48. Misch CE. Stress factors: Influence on treatment planning. In: Misch CE, ed. Dental Implant Prosthetics. St Louis, Mo: Elsevier Mosby; 2005:71-90.
49. Ash MM. Dento-osseous structures. In: Wheeler?s Dental Anatomy, Physiology and Occlusion. Philadelphia, Pa: W.B. Saunders; 1993:359-389.
50. Teixeira ER, Sato Y, Shindoi N. A comparative evaluation of mandibular finite element models with different lengths and elements for implant biomechanics. J Oral Rehabil. 1998;25:299-303.
51. Xu W, Wang JH, Geng J, Huang H. Application of Commercial FEA software. In: Geng J, Yan W, Xu W, eds. Application of the Finite Element Method in Implant Dentistry. Hangzhou, China: Zhejiang University Press; 2008:92-134.
52. Craig RG, Powers JM, eds. Ceramics. In: Restorative Dental Materials. St Louis, Mo: Mosby; 2002:551-574.
53. Anusavice KJ, ed. Dental ceramics. In: Phillips? Science of Dental Materials. St Louis, Mo: Saunders; 2003:655-719.
54. Reinhardt RA, Pao YC, Krejci RF. Periodontal ligament stresses in the initiation of occlusal traumatism. J Periodontal Res. 1984;19:238-246.
55. Craig RG, Peyton FA. Elastic and mechanical properties of human dentin. J Dent Res. 1958;37:710-718.
56. Rees JS, Jacobsen PH. Elastic modulus of the periodontal ligament. Biomaterials. 1997;18:995-999.
57. Middleton J, Jones ML, Hickman J, Danois C, Volp C. Three dimensional modelling of teeth when subjected to orthodontic loading: numerical and experimental validation. Paper presented at: 10th Conference of the European Society of Biomechanics; August 28-31, 1996; Leuven, the Netherlands.
58. Holmes DC, Loftus JT. Influence of bone quality on stress distribution for endosseous implants. J Oral Implantol. 1997;23:104-111.
59. Akca K, Iplikcioglu H. Finite element stress analysis of the influence of staggered versus straight placement of dental implants. Int J Oral Maxillofac Implants. 2001;16:722-730.
60. Yoshida N, Koga Y, Peng CL, Tanaka E, Kobayashi K. In vivo measurement of the elastic modulus of the human periodontal ligament. Med Eng Phys. 2001;23:567-572.
61. Van Rietbergen B, Weinans H, Huiskes R, Odgaard A. A new method to determine trabecular bone elastic properties and loading using micromechanical finite-element models. J Biomech. 1995;28:69-81.
62. Muller M, Mitton D, Moilanen P, Bousson V, Talmant M, Laugier P. Prediction of bone mechanical properties using QUS and pQCT: study of the human distal radius. Med Eng Phys. 2007;30:761-767.
63. Currey JD. The effect of porosity and mineral content on the Young?s modulus of elasticity of compact bone. J Biomech. 1988;21:131-139.
64. Van Ruijven LJ, Mulder L, Van Eijden TM. Variations in mineralization affect the stress and strain distributions in cortical and trabecular bone. J Biomech. 2007;40:1211-1218.
65. Renders GA, Mulder L, Langenbach GE, van Ruijven LJ, van Eijden TM. Biomechanical effect of mineral heterogeneity in trabecular bone. J Biomech. 2008;41:2793-2798.
66. Lui XS, Sajda P, Saha PK, Wehrli FW, Guo XE. Quantification of the roles of trabecular microarchitecture and trabecular type in determining the elastic modulus of human trabecular bone. J Bone Miner Res. 2006;21:1608-1617.
67. Almeida EO, Rocha EP, Freitas AC Jr, Freitas MM Jr. Finite element stress analysis of edentulous mandibles with different bone types supporting multiple-implant superstructures. Int J Oral Maxillofac Implants. 2010;25:1108-1114.
68. Martin RB. The importance of mechanical loading in bone biology and medicine. J Musculoskeletal Neuronal Interact. 2007;7: 48-53.
69. Ford H. Advanced Mechanics of Materials. London, UK: Longmans; 1963.
70. Pao YC, Reinhardt KA, Krejci RF. Root stress with tapered end post design in periodontally compromised teeth. J Prosthet Dent. 1987;57:281-286.
71. Peters MCRB, Poort HW. Biomechanical stress analysis of the amalgam-tooth interface. J Dent Res. 1982;62:358-562.