Laminar Dispersive and Distributive Mixing with Dissolution and Applications to Hot-Melt Extrusion

Hot-Melt Extrusion: Pharmaceutical Applications

Volumn , Issue , 2012, Pages 261-284

  Gogos, Costas G ^a   Liu, Huiju ^a   Wang, Peng ^b  

^a NEW JERSEY INSTITUTE OF TECHNOLOGY   (United States)

^b The University of Rhode Island   (United States)

Author keywords

APAP and PEO, one category of drug polymer mixtures; Back (axial) mixing, on compositional uniformity of HME products; Co TSEs and PED, its significance; Dispersive and distributive mixing; Drag induced pumping, pressurization, enabling co TSEs and SSEs; Drug particulate dissolution in polymeric melt; Laminar dispersive, distributive mixing and HME; Polymer compounding, conceptual structural breakdown

Indexed keywords

EID: 84886126076     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1002/9780470711415.ch12     Document Type: Chapter

References (38)

1. Breitenbach, J. (2002) Melt extrusion: from process to drug delivery technology. European Journal of Pharmaceutics & Biopharmaceutics, 54, 107-117.
2. Crowley, M.M., Zhang, F., Repka, M.A., Thumma, S., Upadhye, S.B., Battu, S.K., McGinity, J.W. and Martin, C. (2007) Pharmaceutical applications of hot-melt extrusion: Part I. Drug Development & Industrial Pharmacy, 33, 909-926.
3. Ghebre-Sellassie, I. and Martin, C. (2007) Pharmaceutical Extrusion Technology. Informa Healthcare, New York.
4. Repka, M.A., Battu, S.K., Upadhye, S.B., Thumma, S., Crowley, M.M., Zhang, F., Martin, C. and McGinity, J.W. (2007) Pharmaceutical applications of hot-melt extrusion: Part II. Drug Development & Industrial Pharmacy, 33, 1043-1057.
5. Martin, C. (2008) Continuous mixing of solid dosage forms via hot melt extrusion. Pharmaceutical Technology, 32, 76-86.
6. Liu, H., Wang, P., Xanthos, M., Zhu, L. and Gogos, C.G. (2009) Reveiew paper: processing aspects of hot melt extrusion in pharmaceutical applications. Proceedings of 2009 SPE-ANTEC, 4, 2370-2375.
7. Tadmor, Z. and Gogos, C.G. (2006) Principles of Polymer Processing. 2nd edition (a: p. 13; b: Chapter 4; c: Chapter 5 and Section 9.3; d: Sections 5.9 and 10.3; e: Chapter 8; f: Chapters 6, 9 and 10; g: chapter 7; h: p.667). Wiley-Interscience, New Jersey.
8. Gogos, C.G., Tadmor, Z. and Kim, M.H. (1998) Melting phenomena and mechanisms in polymer processing equipment. Advances in Polymer Technology, 17, 285-305.
9. Greenhalgh, D.J., Williams, A.C., Timmins, P. and York, P. (1999) Solubility parameters as predictors of miscibility in solid dispersions. Journal of Pharmaceutical Sciences, 88, 1182-1190.
10. Forster, A., Hempenstall, J., Tucker, I. and Rades, T. (2001) Selection of excipients for melt extrusion with two poorlywater-soluble drugs by solubility parameter calculation and thermal analysis. International Journal of Pharmaceutics, 226, 147-161.
11. Burch, H.E. and Scott, C.E. (2001) Evolution of structure in the softening/melting regime of miscible polymer mixing. Polymer Engineering & Science, 41, 1038-1048.
12. Grace, H.P. (1982) Dispersion phenomena in high viscosity immiscible fluid systems and application of static mixers as dispersion devices in such systems. Chemical Engineering Communication, 14, 225-277.
13. Noyes, A.A. and Whitney, W.R. (1897) The rate of solution of solid substances in their own solutions. Journal of American Chemical Society, 19, 930-934.
14. Wurster, D.E. and Taylor, P.W. (1965) Dissolution rates. Journal of Pharmaceutical Sciences, 54, 169-175.
15. Todd, D.B. (1998) Plastics Compounding Equipment and Processing. Hanser Publishing, New York.
16. Gao, J.,Walsh, G.C., Bigio, D., Briber, R.M. and Wetzel, M.D. (2000) Mean residence time analysis for twin screw extruders. Polymer Engineering & Science, 40, 227-237.
17. Gasner, G.E., Bigio, D. and Marks, C. (1999) A new approach to analyzing residence time and mixing in a co-rotating twin screwextruder. Polymer Engineering&Science, 39, 286-298.
18. Nakamichi, K., Nakano, T., Yasuura, H., Izumi, S. and Kawashima, Y. (2002) The role of the kneading paddle and the effect of screw revolution speed and water content on the preparation of solid dispersions using a twin-screw extruder. International Journal of Pharmaceutics, 241, 203-211.
19. Lyons, J.G., Blackie, P. and Higginbotham, C.L. (2008) The significance of variation in extrusion speeds and temperatures on a PEO/PCL blend based matrix for oral drug delivery. International Journal of Pharmaceutics, 351, 201-208.
20. Fujii, M., Okada, H., Shibata, Y., Teramachi, H., Kondoh, M. and Watanabe, Y. (2005) Preparation, characterization, and tableting of a solid dispersion of indomethacin with crospovidone. International Journal of Pharmaceutics, 293, 145-153.
21. Shibata, Y., Fujii, M., Sugamura, Y., Yoshikawa, R., Fujimoto, S., Nakanishi, S., Motosugi, Y., Koizumi, N., Yamada, M., Ouchi, K. and Watanabe, Y. (2009) The preparation of a solid dispersion powder of indomethacin with crospovidone using a twin-extruder or kneader. International Journal of Pharmaceutics, 265, 53-60.
22. Liu, H., Wang, P., Zhang, X., Shen, F. and Gogos, C.G. (2010) Effects of extrusion process parameters on the dissolution behavior of indomethacin in EudragitR E PO solid dispersions. International Journal of Pharmaceutics, 383, 161-169.
23. Miller, D.A., McConville, J.T., Yang, W., Williams III, R.O. and McGinity, J.W. (2007) Hot-melt extrusion for enhanced delivery of drug particles. Journal of Pharmaceutical Sciences, 96, 361-376.
24. Teng, S., Wang, P., Zhu, L., Young, M.W. and Gogos, C.G. (2009) Experimental and numerical analysis of a lab-scale fluid energy mill. Powder Technology, 195, 31-39.
25. Wang, P., Zhu, L., Teng, S., Zhang, Q., Young, M.W. and Gogos, C.G. (2009) A novel process for simultaneous milling and coating of particulates. Powder Technology, 193, 65-68.
26. Verhoeven, E., De Beer, T.R.M., Van den Mooter, G., Remon, J.P. and Vervaet, C. (2008) Influence of formulation and process parameters on the release characteristics of ethylcellulose sustained-release mini-matrices produced by hot-melt extrusion. European Journal of Pharmaceutics & Biopharmaceutics, 69, 158-166.
27. Liu, H., Zhu, L., Wang, P., Zhang, X. and Gogos, C.G. (2011) Effects of screw configurations on the dissolution behavior of indomethacin in EudragitR E PO solid dispersions. Advances in Polymer Technology, doi: 10.1002/adv.20256.
28. Taylor, L.S. and Zografi, G. (1997) Spectroscopic characterization of interactions between PVP and indomethacin in amorphous molecular dispersions. Pharmaceutical Research, 14, 1691-1698.
29. Todd, D.B. (1993) Melting of plastics in kneading blocks. International Polymer Processing, 8, 113-118.
30. Brouwer, T., Todd, D.B. and Janssen, L.P.B.M. (2002) Flow characteristics of screws and special mixing enhancers in a co-rotating twin-screw extruder. International Polymer Processing, 17, 26-32.
31. Scott, C.E. and Macosko, C.W. (1995) Morphology development during the initial stages of polymer-polymer blending. Polymer, 36, 461-470.
32. Mason, J.A. and Sperling, L.H. (1976) Polymer Blends and Composites. New York Plenum Press, New York.
33. Sandler, S.I. (2006) Chemical, Biochemical, and Engineering Thermodynamics. Hoboken, New Jersey, 658-702.
34. Flory, P.J. (1953) Principles of Polymer Chemistry. Ithaca, New York.
35. Tao, J., Sun, Y., Zhang, G. and Yu, L. (2009) Solubility of small-molecule crystals in polymers: d-mannitol in PVP, indomethacin in PVP/VA, and nifedipine in PVP/VA. Pharmaceutical Research, 26, 855-864.
36. Sun, Y., Tao, J., Zhang, G.G.Z. and Yu, L. (2010) Solubilities of crystalline drugs in polymers: An improved analytical method and comparison of solubilities of indomethacin and nifedipine in PVP, PVP/VA, and PVAc. Journal of Pharmaceutical Sciences, 99, 4023-4031.
37. Yang, M., Wang, P., Huang, C.Y., Ku, M.S., Liu, H. and Gogos, C.G. (2010) Solid dispersion of acetaminophen and poly(ethylene oxide) prepared by hot-melt mixing. International Journal of Pharmaceutics, 395, 53-61.
38. Yang, M., Wang, P., Suwardie, H. and Gogos, C.G. (2011) Determination of acetaminophen's solubility in poly(ethylene oxide) by rhelogical, thermal and microscopic methds. International Journal of Pharmaceutics, 403, 83-89.