Clinical performance of a new biomimetic double network material

Open Dentistry Journal

Volumn 7, Issue 1, 2013, Pages 118-122

  Dirxen, Christine ^a   Blunck, Uwe ^a   Preissner, Saskia ^a  

^a CHARITÉ UNIVERSITÄTSMEDIZIN BERLIN   (Germany)

Author keywords

Bruxism; CAD CAM; Dental erosion; Double network hybrid material; Enamic; Non invasive treatment

Indexed keywords

EID: 84885589342     PISSN: 18742106     EISSN: None     Source Type: Journal    
DOI: 10.2174/1874210620130904003     Document Type: Article

References (54)

1. Attin T, Filli T, Imfeld C, Schmidlin PR. Composite vertical bite reconstructions in eroded dentitions after 5. 5 years: a case series. J Oral Rehabil 2012; 39: 73-9.
2. Coldea A, Swain MV, Thiel N. Mechanical properties of polymerinfiltrated-ceramic-network materials: official publication of the Academy of Dental Materials. Dent Mater 2013; 29: 419-26.
3. Alonso V, Caserio M. A clinical study of direct composite fullcoverage crowns: long-term results. Oper Dent 2012; 37: 432-41.
4. Preissner S, Kostka E, Blunck U. A noninvasive treatment of amelogenesis imperfecta. Quintessence Int 2013; 44: 303-5.
5. Guth JF, Almeida ESJS, Ramberger M, Beuer F, Edelhoff D. Treatment concept with CAD/CAM-fabricated high-density polymer temporary restorations. J Esthet Restor Dent 2012; 24: 310-8.
6. Hayashi M, Koychev EV, Okamura K, et al. Heat treatment strengthens human dentin. J Dent Res 2008; 87: 762-6.
7. Plotino G, Grande NM, Bedini R, Pameijer CH, Somma F. Flexural properties of endodontic posts and human root dentin: official publication of the Academy of Dental Materials. Dent Mater 2007; 23: 1129-35.
8. Vieira C, Silva-Sousa YT, Pessarello NM, Rached-Junior FA, Souza-Gabriel AE. Effect of high-concentrated bleaching agents on the bond strength at dentin/resin interface and flexural strength of dentin. Braz Dent J 2012; 23: 28-35.
9. Bechtle S, Ozcoban H, Lilleodden ET, et al. Hierarchical flexural strength of enamel: transition from brittle to damage-tolerant behaviour. J R Soc Interface 2012; 9: 1265-74.
10. Ghavamnasiri M, Abedini S, Mehdizadeh Tazangi A. Effect of different time periods of vital bleaching on flexural strength of the bovine enamel and dentin complex. J Contemp Dent Pract 2007; 8: 21-8.
11. Chen YM, Smales RJ, Yip KH, Sung WJ. Translucency and biaxial flexural strength of four ceramic core materials: official publication of the Academy of Dental Materials. Dent Mater 2008; 24: 1506-11.
12. Guazzato M, Albakry M, Swain MV, Ironside J. Mechanical properties of In-Ceram Alumina and In-Ceram Zirconia. Int J Prosthodont 2002; 15: 339-46.
13. Tinschert J, Zwez D, Marx R, Anusavice KJ. Structural reliability of alumina-, feldspar-, leucite-, mica-and zirconia-based ceramics. J Dent 2000; 28: 529-35.
14. Giordano R. Materials for chairside CAD/CAM-produced restorations. J Am Dent Assoc 2006; 137 Suppl: 14S-21S.
15. Fischer J, Roeske S, Stawarczyk B, Hammerle CH. Investigations in the correlation between Martens hardness and flexural strength of composite resin restorative materials. Dent Mater J 2010; 29: 188-92.
16. Ilie N, Hickel R. Macro-, micro-and nano-mechanical investigations on silorane and methacrylate-based composites: official publication of the Academy of Dental Materials. Dent Mater 2009; 25: 810-9.
17. Leprince J, Palin WM, Mullier T, Devaux J, Vreven J, Leloup G. Investigating filler morphology and mechanical properties of new low-shrinkage resin composite types. J Oral Rehabil 2010; 37: 364-76.
18. Tinschert J, Natt G, Mohrbotter N, Spiekermann H, Schulze KA. Lifetime of alumina-and zirconia ceramics used for crown and bridge restorations. J Biomed Mater Res B Appl Biomater 2007; 80: 317-21.
19. Yilmaz H, Aydin C, Gul BE. Flexural strength and fracture toughness of dental core ceramics. J Prosthet Dent 2007; 98: 120-8.
20. Lin CL, Chang YH, Pa CA. Estimation of the risk of failure for an endodontically treated maxillary premolar with MODP preparation and CAD/CAM ceramic restorations. J Endod 2009; 35: 1391-5.
21. Lohbauer U, Muller FA, Petschelt A. Influence of surface roughness on mechanical strength of resin composite versus glass ceramic materials: official publication of the Academy of Dental Materials. Dent Mater 2008; 24: 250-6.
22. Manojlovic D, Radisic M, Vasiljevic T, Zivkovic S, Lausevic M, Miletic V. Monomer elution from nanohybrid and ormocer-based composites cured with different light sources: official publication of the Academy of Dental Materials. Dent Mater 2011; 27: 371-8.
23. Kinney JH, Balooch M, Marshall SJ, Marshall GW, Jr., Weihs TP. Hardness and Young's modulus of human peritubular and intertubular dentine. Arch Oral Biol 1996; 41: 9-13.
24. Mahoney E, Holt A, Swain M, Kilpatrick N. The hardness and modulus of elasticity of primary molar teeth: an ultra-microindentation study. J Dent 2000; 28: 589-94.
25. Xu HH, Smith DT, Jahanmir S, et al. Indentation damage and mechanical properties of human enamel and dentin. J Dent Res 1998; 77: 472-80.
26. Fischer H, Dautzenberg G, Marx R. Nondestructive estimation of the strength of dental ceramic materials: official publication of the Academy of Dental Materials. Dent Mater 2001; 17: 289-95.
27. Lazar DR, Bottino MC, Ozcan M, et al. Y-TZP ceramic processing from coprecipitated powders: a comparative study with three commercial dental ceramics: official publication of the Academy of Dental Materials. Dent Mater 2008; 24: 1676-85.
28. Visvanathan A, Ilie N, Hickel R, Kunzelmann KH. The influence of curing times and light curing methods on the polymerization shrinkage stress of a shrinkage-optimized composite with hybridtype prepolymer fillers: official publication of the Academy of Dental Materials. Dent Mater 2007; 23: 777-84.
29. Cuy JL, Mann AB, Livi KJ, Teaford MF, Weihs TP. Nanoindentation mapping of the mechanical properties of human molar tooth enamel. Arch Oral Biol 2002; 47: 281-91.
30. Guazzato M, Albakry M, Ringer SP, Swain MV. Strength, fracture toughness and microstructure of a selection of all-ceramic materials. Part II. Zirconia-based dental ceramics: official publication of the Academy of Dental Materials. Dent Mater 2004; 20: 449-56.
31. Deng Y, Lawn BR, Lloyd IK. Characterization of damage modes in dental ceramic bilayer structures. J Biomed Mater Res 2002; 63: 137-45.
32. Flury S, Hayoz S, Peutzfeldt A, Husler J, Lussi A. Depth of cure of resin composites: is the ISO 4049 method suitable for bulk fill materials? official publication of the Academy of Dental Materials. Dent Mater 2012; 28: 521-8.
33. Albashaireh ZS, Ghazal M, Kern M. Two-body wear of different ceramic materials opposed to zirconia ceramic. J Prosthet Dent 2010; 104: 105-13.
34. Rosentritt M, Preis V, Behr M, Hahnel S, Handel G, Kolbeck C. Two-body wear of dental porcelain and substructure oxide ceramics. Clin Oral Investig 2012; 16: 935-43.
35. Palaniappan S, Elsen L, Lijnen I, Peumans M, Van Meerbeek B, Lambrechts P. Three-year randomised clinical trial to evaluate the clinical performance, quantitative and qualitative wear patterns of hybrid composite restorations. Clin Oral Investig 2010; 14: 441-58.
36. Schmage P, Nergiz I, Sito F, Platzer U, Rosentritt M. Wear and hardness of different core build-up materials. J Biomed Mater Res B Appl Biomater 2009; 91: 71-9.
37. Mormann WH, Stawarczyk B, Ender A, Sener B, Attin T, Mehl A. Wear characteristics of current aesthetic dental restorative CAD/CAM materials: two-body wear, gloss retention, roughness and Martens hardness. J Mech Behav Biomed Mater 2013; 20: 113-25.
38. Preis V, Behr M, Handel G, Schneider-Feyrer S, Hahnel S, Rosentritt M. Wear performance of dental ceramics after grinding and polishing treatments. J Mech Behav Biomed Mater 2012; 10: 13-22.
39. Krejci I, Lutz F, Reimer M. Wear of CAD/CAM ceramic inlays: restorations, opposing cusps, and luting cements. Quintessence Int 1994; 25: 199-207.
40. Barkmeier W, Erickson R, Latta M, Wilwerding T. Wear rates of resin composites. Oper Dent 2013; 38(2): 226-33.
41. Yu H, Wegehaupt FJ, Wiegand A, Roos M, Attin T, Buchalla W. Erosion and abrasion of tooth-colored restorative materials and human enamel. J Dent 2009; 37: 913-22.
42. Bindl A, Mormann WH. An up to 5-year clinical evaluation of posterior in-ceram CAD/CAM core crowns. Int J Prosthodont 2002; 15: 451-6.
43. Uludag B, Usumez A, Sahin V, Eser K, Ercoban E. The effect of ceramic thickness and number of firings on the color of ceramic systems: an in vitro study. J Prosthet Dent 2007; 97: 25-31.
44. Atay A, Oruc S, Ozen J, Sipahi C. Effect of accelerated aging on the color stability of feldspathic ceramic treated with various surface treatments. Quintessence Int 2008; 39: 603-9.
45. Kelly JR, Nishimura I, Campbell SD. Ceramics in dentistry: historical roots and current perspectives. J Prosthet Dent 1996; 75: 18-32.
46. Celik EU, Aladag A, Turkun LS, Yilmaz G. Color changes of dental resin composites before and after polymerization and storage in water. J Esthet Restor Dent 2011; 23: 179-88.
47. Ergucu Z, Turkun LS, Aladag A. Color stability of nanocomposites polished with one-step systems. Oper Dent 2008; 33: 413-20.
48. Heydecke G, Butz F, Binder JR, Strub JR. Material characteristics of a novel shrinkage-free ZrSiO(4) ceramic for the fabrication of posterior crowns: official publication of the Academy of Dental Materials. Dent Mater 2007; 23: 785-91.
49. Rinke S, Huls A. Copy-milled aluminous core ceramic crowns: a clinical report. J Prosthet Dent 1996; 76: 343-6.
50. Federlin M, Krifka S, Herpich M, Hiller KA, Schmalz G. Partial ceramic crowns: influence of ceramic thickness, preparation design and luting material on fracture resistance and marginal integrity in vitro. Oper Dent 2007; 32: 251-60.
51. Lawn BR, Pajares A, Zhang Y, et al. Materials design in the performance of all-ceramic crowns. Biomaterials 2004; 25: 2885-92.
52. Thompson JY, Bayne SC, Heymann HO. Mechanical properties of a new mica-based machinable glass ceramic for CAD/CAM restorations. J Prosthet Dent 1996; 76: 619-23.
53. Hervas-Garcia A, Martinez-Lozano MA, Cabanes-Vila J, Barjau-Escribano A, Fos-Galve P. Composite resins: a review of the materials and clinical indications. Med Oral Patol Oral Cir Bucal 2006; 11: E215-20.
54. Perez CR. Alternative technique for class V resin composite restorations with minimum finishing/polishing procedures. Oper Dent 2010; 35: 375-9.