Ceramics in dentistry: Historical roots and current perspectives

Journal of Prosthetic Dentistry

Volumn 75, Issue 1, 1996, Pages 18-32

  Kelly, J Robert ^a,b,c   Nishimura, Ichiro ^a,d   Campbell, Stephen D ^a,e  

^a Amer Acad of Fixed Prosthodontics

^b NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY   (United States)

^c WALTER REED ARMY MEDICAL CENTER   (United States)

^d HARVARD SCHOOL OF DENTAL MEDICINE   (United States)

^e UNIVERSITY OF ILLINOIS AT CHICAGO   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ALLOY; BIOMEDICAL AND DENTAL MATERIALS;

CERAMICS; CHEMISTRY; COMPUTER AIDED DESIGN; DENTAL RESEARCH; DENTAL SURGERY; DENTURE; ENAMEL; ENDODONTICS; EVALUATION; HEAT; HISTORY; HUMAN; REVIEW; SURFACE PROPERTY; TOOTH BRUSHING; TOOTH PROSTHESIS;

CERAMICS; COMPUTER-AIDED DESIGN; DENTAL CASTING TECHNIQUE; DENTAL ENAMEL; DENTAL MATERIALS; DENTAL POLISHING; DENTAL PORCELAIN; DENTAL PROSTHESIS REPAIR; DENTAL RESEARCH; DENTAL RESTORATION FAILURE; DENTAL RESTORATION WEAR; DENTAL RESTORATION, PERMANENT; EVALUATION STUDIES; HEAT; HISTORY, 18TH CENTURY; HISTORY, 19TH CENTURY; HISTORY, 20TH CENTURY; HUMANS; MARGINAL ADAPTATION (DENTISTRY); METAL CERAMIC ALLOYS; SURFACE PROPERTIES;

EID: 0029678682     PISSN: 00223913     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0022-3913(96)90413-8     Document Type: Article

References (165)

1. Magitot E. The history of the mutilation of teeth. Dent Items Int 1892;15;356.
2. Baker CR. History of crown and bridge prosthodontics. In: Tylman SD, ed. Theory and practice of crown and bridge prosthodontics. St Louis: The CV Mosby Co, 1965.
3. Johnson WW. The history of prosthetic dentistry. J PROSTHET DENT 1959;9:841-6.
4. Ring ME. Dentistry, an illistrated history. New York HN Abrams, 1985:160-181,193-211.
5. Kingery WD, Vandiver PB. Ceramic masterpieces. Art, structure, technology. New York: The Free Press, 1986:7-36.
6. Jones DW. Development of dental ceramics. Dent Clin North Am 1985;29:621-44.
7. Prinz H. Pierre Fouchard and his works. Dent Cosmos 1923;65:827-30.
8. Southan DE. Dental porcelain. In: von Fraunhofer JA, ed. Scientific aspects of dental materials. London: Butterworths, 1975:277-9.
9. Sproull RC. A history of porcelain in dentistry. Bull Hist Dent 1978;26:3-10.
10. McLean JW, Hughes TH. The reinforcement of dental porcelain with ceramic oxides. Br Dent J 1965;119:251-4.
11. McLean JW. The alumina reinforced porcelain jacket crown. J Am Dent Assoc 1967;75:621-8.
12. Freese AS. Porcelain fused to iridio-platinum crowns. J PROSTHET DENT 1959;9:847-50.
13. Weinstein M, Katz S, Weinstein AB. Fused porcelain-to-metal teeth. US Patent 3,052,982, 1962.
14. Weinstein M, Weinstein AB. Porcelain-covered metal-reinforced teeth. US Patent 3,052,983, 1962.
15. Sozio RB, Riley EJ. The shrink-free ceramic crown. J PROSTHET DENT 1983;49:182-9.
16. Malament KA. The cast-glass ceramic restoration. J PROSTHET DENT 1987;57:674-83.
17. Larsen-Basse J: Abrasive wear of ceramics. In Jahanmir S, ed. Friction and wear of ceramics. New York: Marcel Dekker, 1994:99-115.
18. Seghi RR, Rosenstiel SF, Bauer P. Abrasion of human enamel by different dental ceramics in vitro. J Dent Res 1991;171:51-5.
19. Reeves N, Gore K, Meiers JC, Kelly JR: Enamel wear against In-Ceram and Vitadur-N with various finishes [Abstract]. J Dent Res 1993;72:187.
20. George LA, Eichmiller FC. Wear of enamel against glass-ceramic, porcelain and amalgam. Proceedings of biomedical and biological applications of ceramics and glass symposium. American Ceramics Society, Cincinnati, April 30 - May 3, 1995. In: Rusin R, Fisehman G, eds. Ceramic transactions, biological and biomedical applications of ceramics and glasses. Westerville, Ohio: American Ceramic Society (in press)
21. Jacobi R, Shillingburg HT, Duneanson, MG. A comparison of the abrasiveness of six ceramic surfaces and gold. J PROSTHET DENT 1991;66: 303-9.
22. Campbell SD, Kelly JR. The influence of surface preparation on the strength and surface microstructure of a cast dental ceramic. Int J Prosthodont 1989;2:459-66.
23. Denry IL, Rosenstiel SF. Flexural strength and fracture toughness of Dicor glass-ceramic after embedment modification. J Dent Res 1993; 72:572-6.
24. Krejei I, Lutz F, Reimer M. Wear of CAD/CAM ceramic inlays: restorations, opposing cusps, and luting cements. Quint Int 1994;25:199-207.
25. Krejci I, Lutz F, Reimer M, Heinzmann JL. Wear of ceramic inlays, their enamel antagonists, and luting cements. J PROSTHET DENT 1993; 69:425-30.
26. Goldstein GR, Barnhard BR, Penugonda B. Profilometer, SEM and visual assessment of porcelain polishing methods. J PROSTHET DENT 1991;65:627-34.
27. Grieve AR, Jeffrey IW, Sharma SJ. An evaluation of three methods of polishing porcelain by comparison of surface topography with the original glaze. Restorative Dent 1991;7:34-6.
28. Giordano R, Cima M, Pober R. Effects of surface finish on flexural strength of various dental ceramics. Int J Prosthodont 1995;8: 311-9.
29. Fairhurst CW, Lockwood PE, Ringle RD, Thompson WO. The effect of glaze on porcelain strength. Dent Mater 1992;8:203-7.
30. Fairhurst CW, Anusavice KJ, Hashinger DT, Ringle RD, Twiggs SW. Thermal expansion of dental alloys and porcelains. J Biomed Mater Res 1980;4:435-46.
31. Mackert JR, Evans AL, Quantitative x-ray diffraction determination of leucite thermal instability in dental porcelain. J Am Ceram Soc 1991; 74:450-3.
32. Mackert JR, Evans AL. Effect of cooling rate on leucite volume fraction in dental porcelains. J Dent Res 1991;70:137-9.
33. Mackert JR, Twiggs SW, Evans AL. Isothermal anneal effect on leucite content in dental porcelains. J Dent Res 1995;74:1259-65.
34. Mackert JR, Butts MB, Fairhurst CW. The effect of the leucite transformation on dental porcelain expansion. Dent Mater 1986;2:32-6.
35. Anusavice KJ, Gray AE. Influence of framework design, contraction mismatch, and thermal history on porcelain checking in fixed partial dentures. Dent Mater 1989;5:58-63.
36. Barghi N, Goldberg J. Porcelain shade stability after repeated firings. J PROSTHET DENT 1977;37:173-5.
37. Barghi N, Richardson JT. A study of various factors influencing shade of bonded porcelain. J PROSTHET DENT 1978;39:282-4.
38. Jorgenson MW, Goodkind RJ. Spectrophotometric study of five porcelain shades relative to the dimensions of color, porcelain thickness, and repeated firing. J PROSTHET DENT 1979;42:96-105.
39. Barghi N. Color and glaze: effects of repeated firings. J PROSTHET DENT 1982;47:393-5.
40. O'Brien WJ, Kay KS, Boenke KM, Groh. Sources of color variation on firing porcelain. Dent Mater 1991;7:170-3.
41. Rosenstiel SF, Johnston WM. The effects of manipulative variables on the color of ceramic metal restorations. J PROSTHET DENT 1988;60:297-303.
42. Hobo S, Shillingburg HT. Porcelain fused to metal: tooth preparation and coping design. J PROSTHET DENT 1973;30:28-36.
43. Shillingburg HT, Hobo S, Fisher DM. Preparation design and margin distortion in porcelain-fused-to-metal restorations. J PROSTHET DENT 1973;29:276-84.
44. Goodacre CJ, van Roekel NB, Dykema KW, Ullman RB. The collarless metal ceramic crown. J PROSTHET DENT 1977;38:615-9.
45. Sozio RB. The marginal aspect of the ceramo-metal restoration: the collarless ceramo-metal restoration. Dent Clin North Amer 1977;21: 787-801.
46. Behrend DA. Ceramometal restorations with supragingival margins. J PROSTHET DENT 1982;47:625-32.
47. Chiche G, Radiquest J, Pinault A, Genini P. Improved esthetics for the ceramometal crown. Int J Periodnt Rest Dent 1986;1:77-87.
48. Chiche CJ, Pinault A. Esthetics of anterior fixed prosthodontics. Chicago: Quintessence Publ Co, 1994:97-107,132-5.
49. Winter R. Achieving esthetic ceramic restorations. J Calif Dent Assoc 1990;18:21-4.
50. Lehner CR, Männchen R, Schärer P. Variable reduced metal support for collarless metal ceramic crowns: a new model for strength evaluation. Int J Prosthodont 1995;8:337-45.
51. Campbell SD, Pelletier LP, Giordano RA. Thermal cycling distortion of metal-ceramic restorations [Abstract]. J Dent Res 1992;71:248.
52. Bagby M, Marshall SJ, and Marshall GW. Residual stress in two dental alloys during porcelain application. Advances in x-ray analysis. New York:Plenum Press, 1988,31:225-60.
53. Campbell SD, Pelletier LP. Thermal cycling distortion of metal ceramics. Part I: metal collar width. J PROSTHET DENT 1992;67:603-8.
54. Campbell SD, Pelletier LP. Thermal cycling distortion of metal ceramics. Part II: etiology. J PROSTHET DENT 1992;68:284-9.
55. Campbell SD, Rasool F, Pelletier LB, Giordano RA. Residual stress determination in metal ceramic alloys [Abstract]. J Dent Res 1994;73:212.
56. Gemalmaz D, Alkumru HN. Marginal fit changes during porcelain firing cycles. J PROSTHET DENT 1995;73:49-54.
57. Hart DA, Powers JM. Flexural strength and modulus of opalescent porcelains [Abstract]. J Dent Res 1994;73:135.
58. Ward MT, Tate WH, Powers, JM. Surface roughness of opalescent porcelains after polishing. Oper Dent 1995;20:106-10.
59. Grossman DG. Processing a dental ceramic by casting methods. In: O'Brien WJ, Craig RG, eds. Proceedings of conference on recent developments in dental ceramics. Columbus, Ohio: American Ceramic Society, 1985:19-40.
60. Geller W, Kwiatkowski SJ. The Willi's glass crown: a new solution in the dark and shadowed zones of esthetic porcelain restorations. Quint Dent Tech 1987;11:233-42.
61. Campbell SD. Esthetic modification of cast dental-ceramic restorations. Int J Prosthodont 1990;3:123-9.
62. Abbate MF, Tjan AHL, Fox WM. Comparison of the marginal fit of various ceramic crown systems. J PROSTHET DENT 1989;61:527-31.
63. Vahidi F, Egloff ET, Panno FV. Evaluation of marginal adaptation of all-ceramic crowns and metal ceramic crowns. J PROSTHET DENT 1991; 66:426-31.
64. Weaver JD, Johson GH, Bales DJ. Marginal adaptation of castable ceramic crowns. J PROSTHET DENT 1991;66:747-53
65. Holmes JR, Sulik WD, Holland GA, Bayne SC. Marginal fit of castable ceramic crowns. J PROSTHET DENT 1992;67:594-9.
66. Pelletier LB, Giordano RA, Campbell SD, Pober RL. Dimensional and compositional analysis of In-Ceram alumina and die material [Abstract]. J Dent Res 1992;71:253.
67. Pober RL, Giordano RA, Campbell SD, Pelletier LB. Compositional analysis of In-Ceram infusion glass [Abstract]. J Dent Res 1992;71:253.
68. Seghi RR, Sorensen JA. Relative flexural strength of six new ceramic materials. Int J Prosthodont 1995;8:239-46.
69. Clause H. Vita In-Ceram, a new system for producing aluminum oxide crown and bridge substructures (German). Quintessenz Zahntech 1990;16:35-46.
70. Probster L, Diehl J. Slip-casting alumina ceramics for crown and bridge restorations. Quint Int 1992;23:25-31.
71. Sorensen JA, Torres TJ, Kang SK, Avera SP. Marginal fidelity of ceramic crowns with different margin designs [Abstract]. J Dent Res 1990;69:279.
72. Sorensen JA, Rang SK, Kyomen SM, Avera SP, Faulkner R. Marginal fidelity of all-ceramic bridges [Abstract]. J Dent Res 1991;70:540.
73. Kappert HF, Altvater A. Field study on the accuracy of fit and the marginal seal of In-Ceram crowns and bridges (German). Dtsch Zahnarztl Z 1991;46:151-3.
74. Seghi RR, Sorensen JA, Engleman MJ, Roumanas E, Torres TJ. Flexural strength of new ceramic materials [Abstract]. J Dent Res 1990;69: 299.
75. Giordano R, Pelletier L, Campbell S, Pober R. Flexural strength of an infused ceramic, glass-ceramic, and feldspathic porcelain. J PROSTHET DENT 1995;73:411-8.
76. Probster L. Survival rate of In-Ceram restorations. Int J Prosthodont 1993;6:259-63.
77. Carrier DD, Kelly JR. In-Ceram failure behavior and core-veneer interface quality as influenced by residual infiltration glass. J Prosthodont 1995; 4:237-42.
78. Giordano R, Drummond J, Lynn L. Shear bond strength of porcelain, glass and composite to In-Ceram [Abstract]. J Dent Res 1994;73:196.
79. Kelly JR, Tesk JA, Sorensen JA. Failure of all-ceramic fixed partial dentures in vitro and in vivo: analysis and modeling. J Dent Res 1995;74:1253-8.
80. Kern M, Knode H, Strub JR. The all-porcelain, resin-bonded bridge. Quintessence Int 1991;22:257-62.
81. Kern M, Schwarzback W, Strub JR. Stability of all-porcelain resin-bonded fixed restorations with different designs: an in vitro study. Int J Prosthodont 1992;5:108-13.
82. Kern M, Thompson V.P. Bonding to glass infiltrated alumina ceramic: adhesive methods and their durability. J PROSTHET DENT 1995;73: 240-9.
83. Sadoun M, Asmussen E. Bonding of resin cements to an aluminous ceramic: a new surface treatment. Dent Mater 1994;10:185-9.
84. Dürr D, Schultheiss R, Kern M, Strub JR. Clinical comparison of porcelain-fused-to-metal and all-porcelain resin-bonded bridges [Abstract]. J Dent Res 1993;72:217.
85. Kern M, Strub JR. Clinical use and experiences with resin-bonded fixed partial dentures made out of the aluminum oxide ceramic In-Ceram (German). Dtsch Zahnarztl Z 1992;47:532-5.
86. Dong JK, Luthy H, Wohlwend A, Scharer P. Heat-pressed ceramics: technology and strength. Int J Prosthodont 1992;5:9-16.
87. Denry IL, Rosenstiel SF, Holloway JA. Characterization of crystalline leucite in feldspathic dental porcelains [Abstract], J Dent Res 1994; 73:369.
88. Mackert JR, Russell CM. Leucite crystallization during Empress processing [Abstract]. J Dent Res 1995;74:166.
89. Richards MW, Kelly JR. Indentation-strength of unpressed and pressed Empress disks [Abstract]. J Dent Res 1994;73:191.
90. Krejci I, Krejci D, Lutz F. Clinical evaluation of a new pressed glass ceramic inlay material over 1.5 years. Quintessence Int 1992;23:181-6.
91. Sorensen JA, Fanuscu MI, Choi C, Mito W. Status of clinical trial on Empress crowns [Abstract]. J Dent Res 1995;74:159.
92. Molin M, Karlsson S. A clinical evaluation of the Optec inlay system. Acta Odontol Scand 1992;50:227-33.
93. Lüthy H, Gougoulakis A, Loeffel O, Mörmann WH. Flexure strength of computer machined ceramics. In: Mörmann WH, ed. Proceedings of the International Symposium on Computer Restorations. Regensdorf-Zurich, Switzerland. Chicago: Quintessence Publ Co, 1991:603-12.
94. Kelly JR, Lüthy H, Gougoulakis A, Pober R, Mörmann WH. Machining effects on feldspathic porcelain and glass ceramic: fractographic analysis. In: Mörmann WH,ed. Proceedings of the International Symposium on Computer Restorations. Regensdorf-Zurich, Switzerland. Chicago: Quintessence Publ Co, 1991:253-73.
95. O'Brien WJ. Dental materials: properties and selection. Chicago: Quintessence Publ Co, 1989:413-546.
96. Grossman DG. Structure and physical properties of DICOR/MGC glass-ceramic. In: Mörmann WH, ed. Proceedings of the International Symposium on Computer Restorations. Regensdorf-Zurich, Switzerland. Chicago: Quintessence Publ Co, 1991:103-15.
97. Kümin P, Lüthy H, Mormann WH. Festigkeit von Keramic und Polymer nach CAD/CIM-Bearbeitung und im Verbund mit Dentin. Schweiz Monatsschr Zahnmed 1993;103:1261-8.
98. Isenberg BP, Essig ME, Leinfelder KF. Three-year clinical evaluation of CAD/CAM restorations. J Esthet Dent 1992;4:173-6.
99. Mörmann W, Krejci I. Computer-designed inlays after 5 years in situ: clinical performance and scanning electron microscopic evaluation. Quint Int 1992;23:109-15.
100. Walther W, Reiss B, Toutenburg H. Longitudinale ereignisanalyse von Cerec-Einlagefüllungen. Dtsch Zahnartzl Z 1994;49:914-7.
101. Sorensen JA, McLaren E, Avera SP. Marginal fidelity and microleakage of ceramic inlay systems [Abstract]. J Dent Res 1994;73:119.
102. Thordrup M, Isido F, H_rsted-Bindslev P. Cerec or laboratory inlay? In: Mörmann WH, ed. Proceedings of the International Symposium on Computer Restorations. Regensdorf-Zurieh, Switzerland. Chicago: Quintessence Publ Co, 1991:91-101.
103. Kawai K, Isenberg BP, Leinfelder KF. Effect of gap dimension on composite resin cement wear. Quint Int 1994;25:53-8.
104. Hayashi M, Kawai K, Torii M, Tsuchitani Y. Marginal adaptation and ut of Celay inlay [Abstract]. J Dent Res 1994;73:136.
105. Seirvo S, Bandettini B, Siervo P, Falleni A, Siervo R. The Celay system: a comparison of the fit of direct and indirect fabrication techniques. Int J Prosthodont 1994;7:434-9.
106. Giordano R. Unpublished data, 1994. Boston University, Boston.
107. Kelly JR, Campbell SD, Bowen HK. Fracture-surface analysis of dental ceramics. J PROSTHET DENT 1989;62:536-41.
108. Kelly JR, Giordano R, Pober R, Cima MJ. Fracture-surface analysis of dental ceramics: clinically-failed restoration. Int J Prosthodont 1990;3:430-40.
109. Thompson JY, Anusavice KJ, Morris H. Fracture surface characterization of clinically failed all-ceramic crowns. J Dent Res 1974;73:1824-32.
110. Anusavice KJ, Hojjatie B. Tensile stress in glass-ceramic crowns: effect of flaws and cementation voids. Int J Prosthodont 1992;5:351-8.
111. Moffa JP. Clinical evaluation of dental restorative materials - final report. Interagency Agreement No. 1Y01-DE40001-05, Letterman Army Institute of Research, San Francisco, 1988.
112. Malament KA, Grossman DG. Clinical application of bonded Dicor crowns: a two-year report [Abstract]. J Dent Res 1990;69:299.
113. Malament KA, Grossman DG. Bonded vs non-bonded Dicor crowns [Abstract]. J Dent Res 1992;71:321.
114. Ritter JE, Lin MR. Effect of polymer coatings on the strength and fatigue behavior of indented soda-lime glass. Glass Technology 1991;32: 51-4.
115. Rosenstiel SF, Gupta PK, Van der Sluys RA, Zimmerman MH. Strength of a dental glass-ceramic after surface coating, Dent Mater 1993;9:274-9.
116. Rosenstiel SF, Denry IL, Zhu W, Gupta PK, Van der Sluys RA. Fluoroalkylethyl silane coating as a moisture barrier for dental ceramics. J Biomed Mater Res 1993;27:415-7.
117. Kingery WD, Bowen HK, Uhlmann DR. Introduction to ceramics. 2nd ed. New York: John Wiley & Sons, 1976:816-46.
118. Piddock V, Qualtrough AJE, Brough I. An investigation of an ion strengthening paste for dental porcelains. Int J Prosthodont 1991;4: 132-7.
119. Denry IL, Rosenstiel SF, Holloway JA, Niemiec MS. Enhanced chemical strengthening of feldspathic dental porcelain. J Dent Res 1993;72: 1429-33.
120. Campbell SD, Giordano RA, Pober R. Flexural strength of Empress treated with glaze, veneer, and Tuf-coat [Abstract]. J Dent Res 1993; 72:187.
121. Seghi RR, Denry IL, Brajevic F. Effects of ion exchange on hardness and fracture toughness of dental ceramics. Int J Prosthodont 1992;5: 309-14.
122. Osborn GD, Denry IL, Rosenstiel, SF, Holloway JA. Effect of abrasion on the flexural strength of ion-exchanged porcelain [Abstract]. J Dent Res 1994;73:320.
123. Holloway JA, Denry IL, Rosenstiel SF. Strengthening of feldspathic porcelain by one-step dual ion exchange [Abstract]. J Dent Res 1994; 73:320.
124. Giordano RA, Campbell SD, Pober R. Flexural strength of feldspathic porcelain treated with ion exchange, overglaze, and polishing. J PROSTHET DENT 1994;71:468-72.
125. Anusavice KJ, Hojjatie B. Effect of thermal tempering on strength and crack propagation behavior of feldspathic porcelains. J Dent Res 1991;70:1009-13.
126. Hojjatie B, Anusavice KJ. Effects of initial temperature and tempering medium on thermal tempering of dental porcelains. J Dent Res 1993;72:566-71.
127. Anusavice KJ, Gray A, Shen C. Influence of initial flaw size on crack growth in air-tempered porcelain. J Dent Res 1991;70:131-6.
128. Anusavice KJ, Shen C, Vermost B, Chow B. Strengthening of porcelain by ion exchange subsequent to thermal tempering. Dent Mater 1992;8:149-52.
129. Hojjatie B, Anusavice KJ, Hsiao LI. Effect of abrasion on strength of thermally tempered dental ceramics [Abstract]. J Dent Res 1992;71: 208.
130. DeHoff PH, Vontivillu SB, Anusavice KJ, Wang Z. Viscoelastic analysis of PFM crowns using finite element methods [Abstract]. J Dent Res 1994;73:369.
131. Drummond JL. Cyclic fatigue of composite restorative materials. J Oral Rehabil 1989;16:509-20.
132. McKinney JE, Wu W. Relationship between subsurface damage and wear of dental restorative composites. J Dent Res 1982;61:1083-8.
133. Llobel A, Nicholls JI, Kois JC, Daly CH. Fatigue life of porcelain repair systems. Int J Prosthodont 1992;5:205-13.
134. Soderholm KJ, Zigan M, Ragan M, Fischlschweiger W, Bergman M. Hydrolytic degradation of dental composites. J Dent Res 1984;63:1248-54.
135. Bastioli C, Romano G. Water sorption and mechanical properties of acrylic based composites. J Mater Sci 1987;22:4207-14.
136. Mair LH, Vowels R. The effect of thermal cycling on the fracture toughness of seven composite restorative materials. Dent Mater 1989;5:23-6.
137. Nambu T, Watanabe, C, Tani, Y. Influence of water on the transverse strength of posterior composite resins. Jpn Dent Mater J 1991;10:138-48.
138. Kikuchi H, Nishiyama M, Antonucci JM. Effect of silanization methods on composite strength and durability [Abstract]. J Dent Res 1994;73:228.
139. Wolf DM, Powers JM, O'Keefe KL. Bond strength of composite to porcelain treated with new porcelain repair agents. Dent Mater 1992;8: 158-61.
140. Anusavice KJ. Degradability of dental ceramics. Adv Dent Res 1992; 6:82-9.
141. Mackert JR. Side-effects of dental ceramics. Adv Dent Res 1992;6:90-3.
142. International Standard ISO 9693:1991(E), Dental ceramic fused to metal restorative materials. Geneva, Switzerland: International Organization for Standardization.
143. International Standard ISO 6872:1995, Dental ceramic. Geneva, Switzerland: International Organization for Standardization.
144. Dickinson AJ, Madorb BK, Dykema RW. A comparative study of the strength of an aluminous porcelain and all-ceramic crown. J PROSTHET DENT 1989;61:297-304.
145. Lehner CR, Scharer P. All-ceramic crowns. Current Opinion in Dentistry, Current Science - Prosthodontics and Endodontics 1992:45-52.
146. Campbell SD. A comparative strength study of metal-ceramic and all-ceramic materials: modulus of rupture. J PROSTHET DENT 1989;62: 476-9.
147. Rizkalla AS, Jones DW, Sutow EJ, Hall GC. Mechanical properties of commercial high strength ceramic core materials [Abstract]. J Dent Res 1994;73:197.
148. Kelly JR. Perspectives on strength. Dent Mater 1995;11:103-10.
149. Ritter JE. Predicting lifetimes of materials and material structures. Dent Mater 1995;11:142-6.
150. Ritter JE. Critique of test methods for lifetime predictions. Dent Mater 1995;11:147-51.
151. Grant GT, Kelly JR. Fabrication and failure behavior of an all-ceramic FPD test analog [Abstract]. J Dent Res 1995;74:160.
152. Crispin BJ, Okamoto SK, Globe H. Effect of porcelain crown substructures on visually perceivable value. 1991;66:209-12.
153. Brewer JP, Akers CK, Garlapo DA, Sorensen SE. Spectrometric analysis of the influence of metal substructures on the color of metal-ceramic restorations. J Dent Res 1985;64:74-7.
154. Seghi RR, Johnston WM, O'Brien WJ. Spectrophotometric analysis of color differences between porcelain systems. J PROSTHET DENT 1986;56: 35-40.
155. Johnston WM, Kao EC. Assessment of appearance match by visual observation and clinical colorimetry. J Dent Res 1989;68:819-22.
156. Seghi RR, Johnston WM, O'Brien WJ. Performance assessment of colorimetric devices on dental porcelain. J Dent Res 1989;68: 1755-9.
157. Seghi RR, Hewlett ER, Kim J. Visual and instrumental colorimetric assessments of small color differences on translucent dental porcelain. J Dent Res 1989;68:1760-4.
158. Seghi RR. Effects of instrument-measuring geometry on colorimetric assessments of dental porcelain. J Dent Res 1990;69:1180-3.
159. Ishikawa-Nagai S, Sato RR, Ishibashi K. Using a computer color-matching system in color reproduction of porcelain restorations. Part 1. Application of CCM to the opaque layer. Int J Prosthodont 1992;6: 495-502.
160. Ishikawa-Nagai S, Sawafuji P, Tuchitoi H, Ishibashi K. Using a computer color-matching system in color reproduction of porcelain restorations. Part 2. Color reproduction of stratiform layer porcelain samples using CCM system. Int J Prosthodont 1993;6:522-7.
161. Ishikawa-Nagai S, Sato RR, Shiraishi A, Ishibashi K. Using a computer color-matching system in color reproduction of porcelain restorations. Part 3. A newly developed spectrometer designed for clinical application. Int J Prosthodont 1994;7:50-5.
162. Vargas MA, Lund PS, Fortin D. Translucency of human enamel and dentin [Abstract]. J Dent Res 1994;73:320.
163. Groh CL, O'Brien WJ, Boenke KM, Mora GP. Differences in color between fired porcelain and shade guides. Int J Prosthodont 1992;5: 510-4.
164. O'Brien WJ, Fan PL, Groh CL. Color difference coefficients of body-opaque double layers. Int J Prosthodont 1994;7:56-61.
165. McLean JW. The science and art of dental ceramics, vol 1. The nature of dental ceramics and their clinical use. Chicago: Quintessence Publ Co, 1979:122-43.