Vegetable oil-based polymers: Properties, processing and applications

Vegetable Oil-Based Polymers: Properties, Processing and Applications

Volumn , Issue , 2012, Pages

  Karak, Niranjan ^a  

^a TEZPUR UNIVERSITY   (India)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84882628007     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1533/9780857097149     Document Type: Book

References (418)

1. P. J. Flory, Principles of Polymer Chemistry, 3rd Printing, Cornel University Press, Ithaca, New York, 1962.
2. N. Karak, Fundamentals of Polymers - Raw Materials to Finish Products, PHI Learning, New Delhi, 2009.
3. P. Ghosh, Polymer Science and Technology of Plastics and Rubbers, 2nd editon, Tata McGraw-Hill, New Delhi, 2003.
4. A. S. Abd-El-Aziz, C. E. Carraher, C. U. Pittman and M. Zeldin, Macromolecules Containing Metal and Metal-like Elements, Volume 5, Metal-Coordination Polymers, Wiley, New York, 2005.
5. E. Chiellini and K. Solaro (eds), Biodegradable Polymers and Plastics, Kluwer Academic Publication, New York, 2003.
6. C. E. Carraher, Introduction to Polymer Chemistry, 2nd edition. Wiley, New York, 2007.
7. J. R. Fried, Polymer Science and Technology, 2nd edition, Printice-Hall, New Delhi, 2005.
8. H. R. Allcock, Introduction to Materials Chemistry, Wiley, New York, 2008.
9. J. J. Meister, Polymer Modifi cation: Principles, Technique, and Applications, CRC Press, Boca Raton, 2000.
10. L. Yu, Biodegradable Polymer Blends and Composites from Renewable Resources, John Wiley, New York, 2008.
11. L. A. Utracki (ed.), Polymer Blends Handbook, Kluwer Academic, Norwell, 2002.
12. G. Odian, Principles of Polymerisations, 3rd edition, Wiley-Interscience, New York, 2004.
13. M. S. Bhatnagar, A Textbook of Polymers (Chemistry and Technology of Polymers), Volumes I-III, S. Chand & Co., New Delhi, 2004.
14. S. Maiti (ed.), Analysis and Characterization of Polymers, Anusandhan Prakashan, Midnapore, 2003.
15. D. W. van Krevelen and K. Nijenhuis, Properties of Polymers, Elsevier, London, 2009.
16. A. Kumar and R. Gupta, Fundamentals of Polymer Engineering, Marcel Dekker, New York, 2003.
17. A. Rawe, Principles of Polymer Chemistry, 2nd edition, Kluwer Academic Publication, New York, 2000.
18. C. E. Carraher Jr., Seymour/Carraher's Polymer Chemistry, 6th edition, Marcel Dekker, New York, 2003.
19. Z. Tadmor and G.G. Gogos, Principles of Polymer Processing, Wiley, New York, 2006.
20. J. A. Brydson, Plastics Materials, Butterworths, London, 1982.
21. J. P. Jain, M. Sokolsky, N. Kumar and A. J. Domb, 'Fatty acid based biodegradable polymer', Polym Rev, 2008, 48, 156-91.
22. N. Karak, Fundamentals of Polymers - Raw Materials to Finished Products, PHI Learning, New Delhi, 2009.
23. S. Maiti and T. Jana, Biodegradable Polymers Polymer Recycle and Waste Management, Anusandhan Prakashan, Midnapore, 2005.
24. Y. Lu, L. Tighzert, P. Dole and D. Erre, 'Preparation and properties of starch thermoplastics modifi ed with waterborne polyurethane from renewable resources', Polymer, 2005, 46, 9863-70.
25. A. Azapagic, A. Emsley and I. Hamerton, Polymers, the Environment and Sustainable Development, Wiley, Hoboken, 2003.
26. S. Dumitriu, Polymeric Biomaterials, Marcel Dekker, New York, 2002.
27. J. P. Jain, M. Sokolsky, N. Kumar and A. J. Domb, Fatty acid based biodegradable polymer, Polym Rev, 2008, 48, 156-91.
28. J. K. Pandey, A. P. Kumar, M. Misra, A. K. Mohanty, L. T. Drzal and R. P. Singh, 'Recent advances in biodegradable nanocomposites', J Nanosci Nanotechnol, 2005, 5, 497-526.
29. S. S. Ray and M. Bousmina, 'Biodegradable polymers and their layered silicate nanocomposites: In greening the 21st century materials world', Prog Mater Sci, 2005, 50, 962-1079.
30. E. Chiellini and K. Solaro (eds), Biodegradable Polymers and Plastics, Kluwer Academic, New York, 2003.
31. J. Kohn, W. J. Welsh and D. Knight, 'A new approach to the rationale discovery of polymeric biomaterials', Biomaterials, 2007, 28, 4171-7.
32. D. K. Platt, Biodegradable Polymers, Smithers Rapra Technology, New Delhi, 2007.
33. L. S. Nair and C. T. Laurencin, 'Biodegradable polymers as biomaterials', Prog Polym Sci, 2007, 32, 762-98.
34. H. Salehizadeh and M. C. M. Van Loosdrecht, 'Production of polyhydroxyalkanoates by mixed culture: recent trends and biotechnological importance', Biotechnol Adv, 2004, 22, 261-79.
35. M. Jenkins, Biomedical Polymers, Woodhead Publishing, New York, 2007.
36. T. Nakajima-Kambe, Y. Shigeno-Akustu, N. Nomura, F. Onuma and T. Nakahara, 'Microbial degradation of polyurethane, polyester polyurethanes and polyether polyurethanes', Appl Microbiol Biotechnol, 1999, 51, 134-40.
37. G. T. Howard, 'Biodegradation of polyurethane: A review', Int Biodeterior Biodegrad, 2002, 49, 245-52.
38. Y. Tokiwa and B. P. Calabia, 'Biodegradability and biodegradation of polyesters', J Polym Environ, 2007, 15, 259-67.
39. R. Duncan, 'The dawning era of polymer therapeutics', Nat Rev Drug Discovery, 2003, 2, 347-60.
40. G. G. Gultekin, C. Atalay-Oral, F. Sahin, D. Karastova, S. B. Tantekin-Ersolmaz and F. S. Guner, 'Fatty acid-based polyurethane fi lms for wound dressing applications', J Mater Sci: Mater Med, 2009, 20, 421-31.
41. H. J. Wang, M. Z. Rong, M. Q. Zhang, J. Hu, H. W. Chen, and T. Czigány, 'Biodegradable foam plastics based on castor oil', Biomacromolecules, 2008, 9, 615-23.
42. H. Yeganeh and P. Hojati-Talemi, 'Preparation and properties of novel biodegradable polyurethane networks based on castor oil and poly(ethylene glycol)', Polym Degrad Stab, 2007, 92, 480-9.
43. R. L. Shogren, Z. Petrovic, Z. Liu, and S. Erhan, 'Biodegradation behavior of some vegetable oil-based polymers', J Polym Environ, 2004, 12, 173-8.
44. T. Jana, B. C. Roy and S. Maiti, 'Characterization and evaluation of the acrylonitrile grafted biodegradable fi lm', J Surf Sci Technol, 2004, 20, 213-27.
45. T. H. Goswami and M. M. Maity, 'Biodegradability of gelatin-PF resin blends by soil burial method', Polym Degrad Stab, 1998, 61, 355-9.
46. J. D. Gu, 'Microbial colonization of polymeric materials for space applications and mechanisms of biodeterioration: A review', Int Biodeterior Biodegrad, 2007, 59, 170-9.
47. J. G. Gu and J. D. Gu, 'Methods currently used in testing microbiological degradation and deterioration of a wide range of polymeric materials with various degree of degradability: A review', J Polym Environ, 2005, 13, 65-74.
48. R. Solaro, A. Corti and E. Chiellini, 'A new respirometric test simulating soil burial conditions for the evaluation of polymer biodegradation', J Environ Polym Degrad, 1998, 6, 203-8.
49. A. Calmon, S. Guillaume, V. B. Maurel, P. Feuilloley and F. Silvestre, 'Evaluation of material biodegradability in real conditions-development of a burial test and an analysis methodology based on numerical vision', J Environ Polym Degrad, 1999, 7, 157-66.
50. L. Edwin and P. M. Ashraf, 'Assessment of biodeterioration of rubber wood exposed to fi eld conditions', Int Biodeterior Biodegrad, 2006, 57, 31-6.
51. S. Dutta, N. Karak, J. P. Saikia and B. Konwar, 'Biodegradation of epoxy and MF modifi ed polyurethane fi lms derived from a sustainable resource', J Polym Environ, 2010, 18, 167-76.
52. S. Dutta, N. Karak, J. P. Saikia and B. Konwar, 'Biocompatible epoxy modifi ed bio-based polyurethane nanocomposites: mechanical property, cytotoxicity and biodegradation', Bioresour Technol, 2009, 100, 6391-7.
53. S. Sarkar, P. K. Singha, S. Dey, M. Mohanty and B. Adhikari, 'Synthesis, characterization, and cytotoxicity analysis of a biodegradable polyurethane', Mater Manuf Processes, 2006, 21, 291-6.
54. M. Martina and D. W. Hutmacher, 'Biodegradable polymers applied in tissue engineering research: A review', Polym Int, 2007, 56, 145-57.
55. C. J. Weber, V. Haugaard, R. Festersen and G. Bertelsen, 'Production and applications of biobased packaging materials for the food industry', Food Addit Contam, 2002, 19, 172-7.
56. M. Kolybaba, L. G. Tabil, S. Panigrahi, W. J. Crerar, T. Powell and B. Wang, 'Biodegradable Polymers: Past, Present, and Future', An ASAE Meeting Presentation, 2003, RRV03-0007, 1-15.
57. V. C. Malshe and M. Sikchi, Basics of Paint Technology, Part I, UICT Mumbai, 2004.
58. S. Paul, Surface Coatings Science and Technology, 2nd edn., John Wiley & Sons, New York, 1997.
59. H. A. M. van der Vossen and G. S. Mkamilo (eds.), Vegetable Oils, Backhuys Publishers, Wageningen, 2007.
60. G. Gultekin, C. Atalay-Oral, S. Erkal, F. Sahin, D. Karastova, S. B. Tantekin-Ersolmaz and F. S. Guner, J Mater Sci: Mater Med, 'Fatty acid-based polyurethane fi lms for wound dressing applications', 2009, 20, 421-31.
61. D. G. Hayes, 'Enzyme-catalyzed modifi cation of oilseed materials to produce eco-friendly products', J Am Oil Chem Soc, 2004, 81, 1077-103.
62. E. Sharmin, S. M. Ashraf and S. Ahmad, 'Synthesis, characterisation, antibacterial and corrosion protective properties of epoxies, epoxy-polyols and epoxypolyurethane coatings from linseed and Pongamia glabra seed oils', Int J Biol Macromol, 2007, 40, 407-22.
63. S. Z. Erhan, Industrial Uses of Vegetable Oils, Industry Publications Services, London, 2005.
64. E. Can, R. P. Wool and S. Kusefoglu, 'Soybean- and castor-oil-based thermosetting polymers: Mechanical properties', J Appl Polym Sci, 2006, 102, 1497-504.
65. I. O. Igwe and O. Ogbobe, 'Studies on the properties of polyesters and polyester blends of selected vegetable oils', J Appl Polym Sci, 2000, 75, 1441-6.
66. N. Dutta, N. Karak and S. K. Dolui, 'Synthesis and characterisation of polyester resins based on Nahar seed oil', Prog Org Coat, 2004, 49, 146-52.
67. V. C. Patel, J. Varughese, P. A. Krishnamoorthy, R. C. Jain, A. K. Singh and M. Ramamoorty, 'Synthesis of alkyd resin from jatropha and rapeseed oils and their applications in electrical insulation', J Appl Polym Sci, 2008, 107, 1724-9.
68. M. A. Saied, S. H. Mansour, M. Eweis, M. Z. El-Sabee, A. L. G. Saad and K. N. Abdel Nour, 'Some biophysical properties of castor oil esterifi ed with some acid anhydrides', Eur J Lipid Sci Technol, 2008, 110, 926-34.
69. S. Tiwari and S. Tiwari, 'Preparation and properties of mahua oil-based liquid crystalline pentalkyds', J Appl Polym Sci, 2009, 114, 2648-54.
70. M. N. Belgacem and A. Gandini (eds.), Monomers, Polymers and Composites from Renewable Resources, Elsivier, Amsterdam, 2008.
71. R. Zamora, G. Gomez and F. J. Hidalgo, 'Classifi cation of vegetable oils by highresolution 13C NMR spectroscopy using chromatographically obtained oil fractions', J Am Oil Chem Soc, 2002, 79, 267-72.
72. G. Cravotto, L. Boffa, S. Mantegna, P. Perego, M. Avogadro and P. Cintas, 'Improved extraction of vegetable oils under high-intensity ultrasound and/or microwaves', Ultrason Sonochem, 2008, 15, 898-902.
73. E. Reverchon and C. Marrone, 'Modeling and simulation of the supercritical CO2 extraction of vegetable oils', J Supercrit Fluids, 2001, 19, 161-75.
74. A. Solladie-Cavallo, H. Senouci, L. Jierry, A. Klein, M. Bouquey and J. Terrisse, 'Linseed oil and mixture with maleic anhydride: 1H and 13C NMR', J Am Oil Chem Soc, 2003, 80, 311-14.
75. F. O. Ayorinde, K. Garvin and K. Saeed, 'Determination of the fatty acid composition of saponifi ed vegetable oils using matrix-assisted laser desorption/ionization time-of-fl ight mass spectrometry', Rapid Commun Mass Spectrom, 2000, 14, 608-15.
76. A. I. Aigbodion and C. K. S. Pillai, 'Synthesis and molecular weight characterisation of rubber seed oil-modifi ed alkyd resins', J Appl Polym Sci, 2001, 79, 2431-8.
77. M. F. Ramadan and J. T. Mörsel, 'Analysis of glycolipids from black cumin (Nigella sativa L.), coriander (Coriandrum sativu m L.) and niger (Guizotia abyssinica Cass.) oilseeds', Food Chem, 2003, 80, 197-204.
78. E. B. Cahoon, E. F. Marillia, K. L. Stecca, S. E. Hall, D. C. Taylor and A. J. Kinney, 'Production of fatty acid components of Meadowfoam oil in somatic soybean embryos', Plant Physiol, 2000, 124, 243-52.
79. J. O. Metzger and U. Bornscheuer, 'Lipids as renewable resources: current state of chemical and biotechnological conversion and diversifi cation', Appl Microbiol Biotechnol, 2006, 71, 13-22.
80. N. A. Porter, L. S. Lehman, B. A. Weber and K. J. Smith, 'Unifi ed mechanism for polyunsaturated fatty acid autoxidation. Competition of peroxy radical hydrogen atom abstraction, β-scission, and cyclisation', J Am Chem Soc, 1981, 103, 6447-55.
81. G. Yildiz, R. L. Wehling and S. L. Cuppett, 'Method for determining oxidation of vegetable oils by near-infrared spectroscopy', J Am Oil Chem Soc, 2001, 78, 495-502.
82. J. C. Espín, C. Soler-Rivas and H. J. Wichers, 'Characterisation of the total free radical scavenger capacity of vegetable oils and oil fractions using 2,2-diphenyl-1-picrylhydrazyl radical', J Agric Food Chem, 2000, 48, 648-56.
83. N. Dutta, N. Karak and S. K. Dolui, 'Structural analysis, rheological behaviour and the performance of fi lms for surface coatings' application of heated and unheated Nahar seed oil', Polym Degrad Stabil, 2005, 88, 317-23.
84. S. Gómez-Alonso, G. Fregapane, M. D. Salvador, and M. H. Gordon, 'Changes in phenolic composition and antioxidant activity of virgin olive oil during frying', J Agric Food Chem, 2003, 51, 667-72.
85. P. P. Kundu and T. R. Kukreja, 'Surface modifi cation of carbon black by vegetable oil - Its effect on the rheometric, hardness, abrasion, rebound resilience, tensile, tear, and adhesion properties', J Appl Polym Sci, 2002, 84, 256-60.
86. A. I. Aigbodion, F. E. Okieimen, E. O. Obazee and I. O. Bakare, 'Utilisation of maleinized rubber seed oil and its alkyd resin as binders in water-borne coatings', Prog Org Coat, 2003, 46, 28-31.
87. A. I. Aigbodion, C. K. S. Pillai, I. O. Bakare and L. E. Yahaya, 'Synthesis, characterisation and evaluation of heated rubber seed oil and rubber seed oilmodifi ed alkyd resins as binders in surface coatings', Ind J Chem Technol, 2001, 8, 378-84.
88. J. T. P. Derksen, F. P. Cuperus and P. Kolster, 'Renewable resources in coatings technology: A review', Prog Org Coat, 1996, 27, 45-53.
89. H. Kohno, R. Suzuki, Y. Yasui, M. Hosokawa, K. Miyashita and T. Tanaka, 'Pomegranate seed oil rich in conjugated linolenic acid suppresses chemically induced colon carcinogenesis in rats', Cancer Sci, 2004, 95, 481-6.
90. J. O. Metzger, 'Fats and oils as renewable feedstock for chemistry', Eur J Lipid Sci Technol, 2009, 111, 865-76.
91. K. Hill, 'Fats and oils as oleochemical raw materials', Pure Appl Chem, 2000, 72, 1255-64.
92. A. Rybak, P. A. Fokou and M. A. R. Meier, 'Metathesis as a versatile tool in oleochemistry', Eur J Lipid Sci Technol, 2008, 110, 797-804.
93. E. H. Pryde and J. A. Rothfus, Industrial and Nonfood Uses of Vegetable Oils, McGraw-Hill, New York, 1989.
94. A. Kumar and S. Sharma, 'An evaluation of multipurpose oil seed crop for industrial uses (Jatropha curcas L.): A review', Ind Crops Prod, 2008, 28, 1-10.
95. A. S. Ramadhas, S, Jayaraj and C. Muraleedharan, 'Use of vegetable oils as I.C. engine fuels - A review', Renewable Energy, 2004, 29, 727-42.
96. A. Demirba, 'Biodiesel fuels from vegetable oils via catalytic and non-catalytic supercritical alcohol transesterifi cations and other methods: a survey', Energy Convers Manage, 2003, 44, 2093-109.
97. B. K. Barnwal and M. P. Sharma, 'Prospects of biodiesel production from vegetable oils in India', Renewable Sustainable Energy Rev, 2005, 9, 363-78.
98. R. Joseph, R. Alex, V. S. Vi nod, C. K. Premalatha and B. Kuriakose, 'Studies on epoxidised rubber seed oil as plasticiser for acrylonitrile butadiene rubber', J Appl Polym Sci, 2003, 89, 668-73.
99. A. Blanco, 'Vegetable oil-based plasticizer', Plastics Eng, 2005, 61, 7.
100. P. Sabin, B. Benjelloun-Mlayah and M. Delmas, 'Offset printing inks based on rapeseed and sunfl ower oil. Part I: Synthesis and characterisation of rapeseed oil- and sunfl ower oil-modifi ed alkyd resins', J Am Oil Chem Soc, 1997, 74, 481-9.
101. S. Hussain, A. H. Fawcett and P. Taylor, 'Use of polymers from biomass in paints', Prog Org Coat, 2002, 45, 435-9.
102. A. I. Aigbodion and C. K. S. Pillai, 'Preparation, analysis and applications of rubber seed oil and its derivatives in surface coatings', Prog Org Coat, 2000, 38, 187-92.
103. S. Ahmad, S. M. Ashraf, F. Naqvi, S. Yadav and A. Hasnat, 'A polyesteramide from Pongamia glabra oil for biologically safe anticorrosive coating', Prog Org Coat, 2003, 47, 95-102.
104. V. C. Malshe and M. Sikchi, Basics of Paint Technology, Part I, UICT, Mumbai, 2004.
105. S. Paul, Surface Coatings Science and Technology, 2nd edn, John Wiley & Sons, New York, 1997.
106. Oil and Colour Chemist's Association of Australia, Surface Coatings, Vol. 1, Chapman and Hall, London, 1981.
107. Z. W. Wicks, J. Frank, N. Jones and S. P. Pappas, Organic Coatings Science and Technology, 2nd edn, John Wiley & Sons, New Jersey, 1999.
108. K. Manczyk and P. Szewczyk, 'Highly branched high solids alkyd resins', Prog Org Coat, 2002, 44, 99-109.
109. F. A. El-Hai, I. A. Sabbah, A. M. Naser and N. S. Abdel-Rehim, 'High performance alkyd resin compositions for coating', Int J Polym Mater, 2004, 53, 871-8.
110. I. O. Igwe and O. Ogbobe, 'Studies on the properties of polyesters and polyester blends of selected vegetable oils', J Appl Polym Sci, 2000, 75, 1441-6.
111. S. Miao, S. Zhang, Z. Su and P. Wang, Chemoenzymatic synthesis of oleic acidbased polyesters for use as highly stable biomaterials, J Polym Sci Part A: Polym Chem, 2008, 46, 4243-8.
112. N. Dutta, N. Karak and S. K. Dolui, Synthesis and characterization of polyester resins based on Nahar seed oil, Prog Org Coat, 2004, 49, 146-52.
113. N. Dutta, N. Karak and S. K. Dolui, Stoving paint from Mesua ferrea L. seed oil based short oil polyester and MF resins blend, Prog Org Coat, 2007, 58, 40-5.
114. V. C. Patel, J. Varughese, P. A. Krishnamoorthy, R. C. Jain, A. K. Singh and M. Ramamoorty, Synthesis of alkyd resin from jatropha and rapeseed oils and their applications in electrical insulation, J Appl Polym Sci, 2008, 107, 1724-9.
115. M. A. Saied, S. H. Mansour, M. Eweis, M. Z. El-Sabee, A. L. G. Saad and K.N. Abdel Nour, Some biophysical properties of castor oil esterifi ed with some acid anhydrides, Eur J Lipid Sci Technol, 2008, 110, 926-34.
116. S. Tiwari and S. Tiwari, Preparation and properties of mahua oil-based liquid crystalline pentalkyds, J Appl Polym Sci, 2009, 114, 2648-54.
117. M. N. Belgacem and A. Gandini (eds), Monomers, Polymers and Composites from Renewable Resources, Elsivier, Amsterdam, 2008.
118. A. I. Aigbodion and C. K. S. Pillai, Synthesis and molecular weight characterization of rubber seed oil-modifi ed alkyd resins, J Appl Polym Sci, 2001, 79, 2431-8.
119. N. Thanamongkollit, K. R. Miller and M. D. Soucek, Synthesis of UV-curable tung oil and UV-curable tung oil based alkyd, Prog Org Coat, 2012, 73, 425-34.
120. T. V. Fomenko, V. V. Sergeeva and E. E. Leschenko, Composition for Protective Coatings, RU Pat. 2216567, 2003.
121. C. O. Akintayo and K. O. Adebowale, 'Synthesis, characterization and evaluation of chlorinated Albizia benth medium oil alkyds', Prog Org Coat, 2004, 50, 138-43.
122. E. Can, R. P. Wool and S. Kusefoglu, Soybean- and castor-oil-based thermosetting polymers: Mechanical properties, J Appl Polym Sci, 2006, 102, 1497-504.
123. C. O. Akintayo and K. O. Adebowale, Synthesis and characterization of acrylated Albizia benth medium oil alkyds, Prog Org Coat, 2004, 50, 207-12.
124. C. I. Elsner, E. Cavalcanti, O. Ferraz and A. R. Di Sarli, Evaluation of the surface treatment effect on the anticorrosive performance of paint systems on steel, Prog Org Coat, 2003, 48, 50-62.
125. O. Saravari, P. Phapant and V. Pimpan, Synthesis of water-reducible acrylic- alkyd resins based on modifi ed palm oil, J Appl Polym Sci, 2005, 96, 1170-5.
126. H. J. Wang, M. Z. Rong, M.Q. Zhang, J. Hu, H. W. Chen and T. Czigany, Biodegradable foam plastics based on castor oil, Biomacromolecules, 2008, 9, 615-23.
127. R. J. Minari, M. Goikoetxea, I. Beristain, M. Paulis, M. J. Barandiaran and J. M. Asua, Molecular characterization of alkyd/acrylic latexes prepared by miniemulsion polymerization, J Appl Polym Sci, 2009, 114, 3143-51.
128. Y. V. Emel'yanov, V. P. Shaboldin, Y. N. Kuznetsov, N. P. Moskvin, L. M. Vasil'va, T. A. Romanova, and N. A. Bykovskaya, Composition for Paints, RU Pat. 2203295, 2003.
129. N. Dutta, N. Karak and S. K. Dolui, Alkyd-epoxy blends as multipurpose coatings, J Appl Polym Sci, 2006, 100, 516-21.
130. N. Dutta, N. Karak and S. K. Dolui, High performance at low cost blending seed oil modifi ed polyesters with MF resins for high quality Industrial coatings, Eur Coat J, 2006, 3, 42-7.
131. K. T. Lu, C. T. Liu, S. M. Lin, 'The effect of alkyd resins on the properties of AA-NC semi-IPNs as binders in wood fi nish', J Appl Polym Sci, 2004, 93, 1923-7.
132. C. Wang, G. Lin, J. H. Pae, F. N. Jones, H. Ye and W. Shen, 'Novel synthesis of carboxy-functional soybean acrylic-alkyd resins for water-reducible coatings', J Coat Technol, 2000, 72, 55-61.
133. A. I. Aigbodion, F. E. Okieimen, E. O. Obazee and I. O. Bakare, Utilisation of maleinized rubber seed oil and its alkyd r esin as binders in water-borne coatings, Prog Org Coat, 2003, 46, 28-31.
134. A. I. Aigbodion, F. E. Okieimen, E. U. Ikhuoria, I. O. Bakare and E. O. Obazee, Rubber seed oil modifi ed with maleic anhydride and fumaric acid and their alkyd resins as binders in water-reducible coatings, J Appl Polym Sci, 2003, 89, 3256-9.
135. O. Saravari, P. Phapant and V. Pimpan, Synthesis of water-reducible acrylicalkyd resins based on modifi ed palm oil, J Appl Polym Sci, 2005, 96, 1170-5.
136. E. A. Indeikin, O. A. Kulikova and V. B. Manerov, Physical-chemical conditions for production of alkyd-acrylic dispersion, Macromol Symp, 2002, 187, 563-71.
137. S. N. Gan and B. Y. Tan, FTIR studies of the curing reactions of palm oil alkyd- melamine enamels, J Appl Polym Sci, 2001, 80, 2309-15.
138. A. Spyros, Characterization of unsaturated polyester and alkyd resins Using one- and two-dimensional NMR spectroscopy, J Appl Polym Sci, 2003, 88, 1881-8.
139. A. Spyros, Quantitative determination of the distribution of free hydroxylic and carboxylic groups in unsaturated polyester and alkyd resins by 31P-NMR spectroscopy, J Appl Polym Sci, 2002, 83, 1635-42.
140. F. Stefanoiu, L. Candy, C. Vaca-Garcia and E. Borredon, Kinetics and mechanism of the reaction between maleic anhydride and fatty acid esters and the structure of the products, Eur J Lipid Sci Technol, 2008, 110, 441-7.
141. S. Aydin, H. Akcay, E. Özkan, F. S. Güner and A. T. Erciyes, 'The effects of anhydride type and amount on viscosity and fi lm properties of alkyd resin', Prog Org Coat, 2004, 51, 273-9.
142. S. Majumdar, D. Kumar and Y. P. S. Nirvan, 'Acrylate grafted dehydrated castor oil alkyd: A binder for exterior paints, J Coat Technol, 1998, 70, 27-33.
143. P. K. Maiti, An antitracking varnish for rated electrical application, J Appl Polym Sci, 2009, 111, 3065-73.
144. I. V. Voronin, V. Y. Naumenko and V. F. Petrunin, Radar Absorbing Material and Method of Manufacturing, RU Pat. 2200749, 2003.
145. S. S. Mahapatra and N. Karak, 'Synthesis and characterization of polyesteramide resins from Nahar seed oil for surface coating applications', Prog Org Coat, 2004, 51, 103-8.
146. S. Ahmad, S. M. Ashraf, F. Naqvi, S. Yadav and A. Hasnat, 'A polyesteramide from Pongamia glabra oil for biologically safe anticorrosive coating', Prog Org Coat, 2003, 47, 95-102.
147. S. Ahmad, S. M. Ashraf, F. Naqvi, S. Yadav and A. Hasnat, 'A polyesteramide from annona squamosa oil for anticorrosive coating', J Polym Mater, 2001, 18, 53-9.
148. A. S. Trevino and D. L. Trumbo, 'Acetoacetylated castor oil in coatings applications', Prog Org Coat, 2002, 44, 49-54.
149. D. A. Raval, T. K. Roy and V. M. Mannari, 'Castor oil based polyesteramideamino resin systems for industrial coating applications', J Sci Ind Res, 1996, 55, 263-7.
150. S. M. Ashraf, S. Ahmad, U. Riaz, M. Alam and H. O. Sharma, 'Miscibility behavior of blend of polyesteramides of linseed oil and dehydrated castor oil with poly(methacrylic acid)', J Appl Polym Sci, 2007, 103, 1367-74.
151. S. Ahmad, S. M. Ashraf and F. Zafar, 'Development of linseed oil based polyesteramide without organic solvent at lower temperature', J Appl Polym Sci, 2007, 104, 1143-8.
152. M. Alam, A. R. Ray and S. Ahmad, 'Synthesis and characterization of poly(ester amide urethane) from linseed oil as anticorrosive coatings', J Appl Polym Sci, 2009, 114, 3268-73.
153. S. Mistry and D. Agarwal, 'Studies on the fi lm characteristics of polyesteramide resins based on hydroxy ethyl fatty acid amide', Pigment Resin Technol, 2009, 38, 366-71.
154. F. Zafar, S. M. Ashraf and S. Ahmad, 'Studies on zinc-containing linseed oil based polyesteramide', React Funct Polym, 2007, 67, 928-35.
155. F. Zafar, S. M. Ashraf and S. Ahmad, 'In situ development of Zn/Cd-incorporated poly(ester amide-urethane) from sustainable resource', J Appl Polym Sci, 2008, 110, 584-93.
156. F. Zafar, S. M. Ashraf and S. Ahmad, 'Cd and Zn-incorporated polyesteramide coating materials from seed oil-A renewable resource', Prog Org Coat, 2007, 57, 68-75.
157. X. Chen, H. Zhong, L. Jia, J. Ling, R. Tang, J. Qiao and Z. Zhang, 'Polyesteramides used for hot melt adhesives: Synthesis and effect of inherent viscosity on properties', J Appl Polym Sci, 2001, 81, 2696-3001.
158. T. K. Roy, V. M. Mannari and D. A. Raval, 'Synthesis and applications of oilmodifi ed polyesteramide resins for surface coatings', J Sci Ind Res, 1997, 56, 159-63.
159. T. K. Roy, D. A. Raval and V. M. Mannari, 'Water-dispersible polyesteramide resins for surface coating applications', Int J Polym Mater, 1998, 42, 39-52.
160. F. Zafar, E. Sharmin, S. M. Ashraf and S. Ahmad, 'Ambient-cured polyesteramidebased anticorrosive coatings from linseed oil-A sustainable resource', J Appl Polym Sci, 2005, 97, 1818-24.
161. F. Zafar, S. M. Ashraf and S. Ahmad, 'Air drying polyesteramide from a sustainable resource', Prog Org Coat, 2004, 52, 250-6.
162. S. Ahmad, S. M. Ashraf, E. Sharmin and M. Alam, 'Ambient cured tartaric acid modifi ed oil fatty amide anticorrosive coatings', J Macromol Sci Part A: PAC, 2005, 42, 751-64.
163. S. Ahmad, S. M. Ashraf and M. Alam, 'Studies on melamine modifi ed polyesteramide as anticorrosive coatings from linseed oil: A sustainable resource', J Macromol Sc Part A: PAC, 2006, 43, 773-83.
164. S. Ahmad, S. M. Ashraf and M. Alam, 'Synthesis and characterization of piperazine-modifi ed linseed oil fatty amide coatings', Int J Polym Anal Charact, 2006, 43, 171-84.
165. S. Aqeel, H. A. El-Wahab, A. Mahdy, F. A. El-Hai and M. A. El-Fattah, 'New modifi ed polyesteramide resin for industrial applications', Prog Org Coat, 2010, 68, 219-24.
166. S. Ahmed, S. M. Ashraf, F. Naqvi, S. Yadav and F. Zafar, 'Development and characterization of vinylated polyesteramide from non-edible seeds oils', Prog Org Coat, 2006, 56, 1-7.
167. F. Zafar, E. Sharmin, S. M. Ashraf and S. Ahmad, 'Studies on poly(styreneco-maleic anhydride)-modifi ed polyesteramide-based anticorrosive coatings synthesized from a sustainable resource', J Appl Polym Sci, 2004, 92, 2538-44.
168. S. Ahmad, S. M. Ashraf, A. Hasnat, S. Yadav and A. Jamal, 'Studies on urethanemodifi ed alumina-fi lled polyesteramide anticorrosive coatings cured at ambient temperature', J Appl Polym Sci, 2001, 82, 1855-65.
169. S. Ahmad, S. M. Ashraf, F. Naqvi, S. Yadav and F. Zafar, 'Alumina-incorporated polyesteramide from non-edible seed oils', J Macromol Sci Part A: PAC, 2006, 43, 1409-19.
170. S. Ahmad, S. M. Ashraf, A. Hasnat, E. Sharmin and A. Kamal, 'Antimony acrylate modifi ed polyesteramide anticorrosive coatings from a sustainable resource', J Polym Mater, 2005, 22, 377-84.
171. S. Ahmad, M. M. Haque, S. M. Ashraf and S. Ahmad, 'Urethane modifi ed boron fi lled polyesteramide: A novel anti-microbial polymer from a sustainable resource', Eur Polym J, 2004, 40, 2097-104.
172. S. S. Mahapatra and N. Karak, 'Hyperbranched polyamine: A promising curing agent for a vegetable oil-based poly(ester-amide) resin', Prog Org Coat, 2007, 60, 328-34.
173. Z. Qian, S. Li, Y. He, C. Li and X. Liu, 'Synthesis and thermal degradation of biodegradable polyesteramide based on ∑-caprolactone and 11-aminoundecanoic acid', Polym Degrad Stabil, 2003, 81, 279-86.
174. N. P. Bharathi, N. U. Khan, S. Shreaz and A. A. Hashmi, 'Seed oil based zinc bioactive polymers: Synthesis, characterization and biological studies', J Inorg Organomet Polym Mater, 2009, 19, 558-65.
175. C. Park, E. Y. Kim, Y. T. Yoo and S. S. Im, 'Effect of hydrophilicity on the biodegradability of polyesteramides', J Appl Polym Sci, 2003, 90, 2708-14.
176. K. Kojio, S. Nakashima and M. Furukawa, 'Microphase-separated structure and mechanical properties of norbornane diisocyanate-based polyurethanes', Polymer, 2007, 48, 997-1004.
177. B. F. Pierce, A. H. Brown and V. V. Sheares, 'Thermoplastic poly(ester urethane)s with novel soft segments', Macromolecules, 2008, 41, 3866-73.
178. G. Lligadas, J. C. Ronda, M. Galia and V. Cadiz, 'Poly(ether urethane) networks from renewable resources as candidate biomaterials: Synthesis and characterization', Biomacromolecules, 2007, 8, 686-92.
179. C. Hepburn, Polyurethane Elastomers, 2nd edition, Elsevier Applied Science, London, 1992.
180. C. Zhang and S. Feng, 'Effect of glycols on the properties of polyester polyols and of room-temperature-curable casting polyurethanes', Polym Int, 2004, 53, 1936-40.
181. H. Yeganeh and M. R. Mehdizadeh, 'Synthesis and properties of isocyanate curable millable polyurethane elastomers based on castor oil as a renewable resource polyol', Eur Polym J, 2004, 40, 1233-8.
182. K. Somani, S. Kansara, R. Parmar and N. Patel, 'High solids polyurethane coatings from castor-oil-based polyester-polyols', Int J Polym Mater, 2004, 53, 283-93.
183. S. Ahmad, S. M. Ashraf, E. Sharmin, F. Zafar and A. Hasnat, 'Studies on ambient cured polyurethane modifi ed epoxy coatings synthesized from a sustainable resource', Prog Cryst Growth Charact Mater, 2002, 45, 83-8.
184. J. John, M. Bhattacharya and R. B. Turner, 'Characterization of polyurethane foams from soybean oil', J Appl Polym Sci, 2002, 86, 3097-107.
185. A. Guo, D. Demydov, W. Zhang and Z. S. Petrovic, 'Polyols and polyurethanes from hydroformylation of soybean oil', J Polym Environ, 2002, 10, 49-52.
186. V. Sharma and P. P. Kundu, 'Addition polymers from natural oils-A review', Prog Polym Sci, 2006, 31, 983-1008.
187. Z. S. Petrovic, A. Guo and W. Zhang, 'Structure and properties of polyurethanes based on halogenated and nonhalogenated soy-polyols', J Polym Sci Part A: Polym Chem, 2000, 38, 4062-9.
188. T. W. Pechar, G. L. Wilkes, B. Zhou and N. Luo, 'Characterization of soy-based polyurethane networks prepared with different diisocyanates and their blends with petroleum-based polyols', J Appl Polym Sci, 2007, 106, 2350-62.
189. M. Szycher, Szycher's Handbook of Polyurethanes, CRC press, Boca Raton, 1999.
190. Z. S. Petrovic, 'Polyurethanes from vegetable oils', Polym Rev, 2008, 48, 109-55.
191. N. M. K. Lamba, K. A. Woodhouse and S. L. Cooper, Polyurethanes in Biomedical Applications, CRC Press, Boca Raton, 1998.
192. D. K. Chattopadhyay and K. V. S. N. Raju, 'Structural engineering of polyurethane coatings for high performance applications', Prog Polym Sci, 2007, 47, 352-418.
193. K. I. Suresh and V. S. Kishanprasad, 'Synthesis, structure, and properties of novel polyols from cardanol and developed polyurethanes', Ind Eng Chem Res, 2005, 44, 4504-12.
194. S. Dinda, A. V. Patwardhan, V. V. Goud and N. C. Pradhan, 'Epoxidation of cottonseed oil by aqueous hydrogen peroxide catalysed by liquid inorganic acids', Bioresource Technol, 2008, 100, 3737-44.
195. V. V. Goud, A. V. Patwardhan, S. Dinda and N. C. Pradhan, 'Epoxidation of karanja (Pongamia glabra) oil catalysed by acidic ion exchange resin', Eur J Lipid Sci Technol, 2007, 109, 575-84.
196. Y. Guo, V. M. Mannari and J. L. Massingill, 'Hydrolysis of epoxidized soybean oil in the presence of phosphoric acid', J Am Oil Chem Soc, 2007, 84, 929-35.
197. L. L. Monteavaro, E. O. Silva, A. P. O. Costa, D. Samios, A. E. Gerbase and C. L. Petzhold, 'Polyurethane networks from formiated soy polyols: Synthesis and mechanical characterization', J Am Oil Chem Soc, 2005, 82, 365-71.
198. R. Mungroo, N. C. Pradhan, V. V. Goud and A. K. Dalai, 'Epoxidation of canola oil with hydrogen peroxide catalyzed by acidic ion exchange resin', J Am Oil Chem Soc, 2008, 85, 887-96.
199. P. Tran, D. Graiver and R. Narayan, 'Ozone-mediated polyol synthesis from soybean oil', J Am Oil Chem Soc, 2005, 82, 653-9.
200. I. Javni, W. Zhang and Z. S. Petrovic, 'Effect of different isocyanates on the properties of soy-based polyurethanes', J Appl Polym Sci, 2003, 88, 2912-16.
201. B. Tamami, S. Sohn, G. L. Wilkes and G. L. B. Tamami, 'Incorporation of carbon dioxide into soybean oil and subsequent preparation and studies of nonisocyanate polyurethane networks', J Appl Polym Sci, 2004, 92, 883-9.
202. H. Yeganeh and P. H. Talemi, 'Preparation and properties of novel biodegradable polyurethane networks based on castor oil and poly(ethylene glycol)', Polym Degrad Stabil, 2007, 92, 480-9.
203. A. Guo, W. Zhang and Z. S. Petrovic, 'Structure-property relationships in polyurethanes derived from soybean oil', J Mater Sci, 2006, 41, 4914-20.
204. F. S. Guner, A. Gumusel, S. Calica and A. T. Erciyes, 'Study of fi lm properties of some urethane oils', J Coat Technol, 2002, 74, 55-9.
205. A. Koprululu, A. Onen, I. E. Serhatli and F. S. Guner, 'Synthesis of triglyceridebased urethane macromers and their use in copolymerization', Prog Org Coat, 2008, 63, 365-71.
206. S. Dutta and N. Karak, 'Synthesis, characterization of poly(urethane amide) resins from Nahar seed oil for surface coating applications', Prog Org Coat, 2005, 53, 147-52.
207. S. Dutta and N. Karak, 'Effect of the NCO/OH ratio on the properties of Mesua Ferrea L. seed oil-modifi ed polyurethane resins', Polym Int, 2006, 55, 49-56.
208. V. D. Athawale and K. R. Joshi, 'Chemoenzymatic synthesis of PURs', Eur Coat J, 2000, 6, 42-6.
209. H. Yeganeh and M. A. Shamekhi, 'Novel polyurethane insulating coatings based on polyhydroxyl compounds, derived from glycolysed PET and castor oil', J Appl Polym Sci, 2006, 99, 1222-33.
210. Y. H. Hu, Y. Gao, D. N. Wang, C. P. Hu, S. Zu, L. Vanoverloop and D. Randall, 'Rigid polyurethane foam prepared from a rape seed oil based polyol', J Appl Polym Sci, 2002, 84, 591-7.
211. C. S. Lee, T. L. Ooj, C. H. Chuah and S. Ahmad, 'Rigid polyurethane foam production from palm oil-based epoxidized diethanolamides', J Am Oil Chem Soc, 2007, 84, 1161-7.
212. H. P. Bhunia, G. B. Nando, T. K. Chaki, A. Basak, S. Lenka and P. L. Nayak, 'Synthesis and characterization of polymers from cashewnut shell liquid (CNSL), a renewable resource II. Synthesis of polyurethanes', Eur Polym J, 1999, 35, 1381-91.
213. C. S. Sanmathi, S. Prasannakumar and B. S. Sherigara, 'Interpenetrating polymer networks based on polyol modifi ed castor oil polyurethane and poly(2-ethoxyethyl methacrylate): Synthesis, chemical, mechanical, thermal properties, and morphology', J Appl Polym Sci, 2004, 94, 1029-34.
214. S. Dutta and N. Karak, 'Mesua Ferrea L seed oil based polyurethane and melamine-formaldehyde blends', Euas Chem Technol J, 2005, 7, 251-60.
215. S. Dutta and N. Karak, 'Blends of Mesua ferrea L. seed oil based polyurethane with epoxy resin', Pigment Resin Technol, 2007, 36, 74-82.
216. G. Gündüz, A. H. Khalid, A. Mecidolu and L. Aras, 'Water-borne and air-drying oil-based resins', Prog Org Coat, 2005, 49, 259-69.
217. Y. S. Hu, Y. Tao, and C. P. Hu, 'Polyurethaneurea/vinyl polymer hybrid aqueous dispersions based on renewable material', Biomacromolecules, 2001, 2, 80-4.
218. S. S. Narine, X. Kong, L. Bouzidi and P. Sporns, 'Physical properties of polyurethanes produced from polyols from seed oils: I. Elastomers', J Am Oil Chem Soc, 2007, 84, 55-63.
219. N. U. Soriano, V. P. Migo and M. Matsumura, 'Ozonation of sunfl ower oil: Spectroscopic monitoring of the degree of unsaturation', J Am Oil Chem Soc, 2003, 80, 997-1001.
220. A. Zlatanic, C. Lava, W. Zhang and Z. S. Petrovic, 'Effect of structure on properties of polyols and polyurethanes based on different vegetable oils', J Polym Sci Part B: Polym Phys, 2004, 42, 809-16.
221. T. Vlcek and Z. S. Petrovic, 'Optimization of the chemoenzymatic epoxidation of soybean oil', J Am Oil Chem Soc, 2006, 83, 247-52.
222. E. Sharmin, M. S. Alam, R. K. Philip and S. Ahmad, 'Linseed amide diol/DGEBA epoxy blends for coating applications: Preparation, characterization, ageing studies and coating properties', Prog Org Coat, 2010, 67, 170-9.
223. F. S. Guner, M. Baranak, S. Soytas and A. T. Erciyes, 'Flow behavior of oilmodifi ed polymer solutions', Prog Org Coat, 2004, 50, 172-8.
224. J. G. Krishna, O. S. Josyulu, J. Sobhanadri and R. Subrahmaniam, 'Dielectric behaviour of isocyanate-terminated polymers', J Phys D Appl Phys, 1982, 15, 2315-24.
225. R. L. Shogren, Z. Petrovic, Z. Liu and S. Z. Erhan, 'Biodegradation behavior of some vegetable oil-based polymers', J Polym Environ, 2004, 12, 173-8.
226. K. H. Badri, Z. Othman and S. H. Ahmad, 'Rigid polyurethane foams from oil palm resources', J Mater Sci, 2004, 39, 5541-2.
227. O. Yilmaz, F. S. Guner and A. T. Erciyes, 'The usage of linseed oil-based polyurethanes as a rheological modifi er', J Appl Polym Sci, 2005, 98, 1032-5.
228. S. Dutta, N. Karak and T. Jana, 'Evaluation of Mesua ferrea L. seed oil modifi ed polyurethane paints', Prog Org Coat, 2009, 65, 131-5.
229. H. Yeganeh and H. R. Moeini, 'Novel polyurethane electrical insulator coatings based on amide-ester-ether polyols derived from castor oil and re-cycled poly(ethylene terephthalate)', High Performance Polym, 2007, 19, 113-26.
230. S. Ahmad, M. Haque, S. M. Ashraf and S. Ahmad, 'Urethane modifi ed boron fi lled polyesteramide: a novel anti-microbial polymer from a sustainable resource', Eur Polym J, 2004, 40, 2097-104.
231. G. Du, A. Tekin, E. G. Hammond and L. K. Woo, 'Catalytic epoxidation of methyl linoleate', J Am Oil Chem Soc, 2004, 81, 477-80.
232. A. E. Gerbase, J. R. Gregório, M. Martinelli, M. C. Brasil and A. N. F. Mendes, 'Epoxidation of soy-bean oil by the methyltrioxorhenium-CH2Cl2/H2O2 catalytic biphasic system', J Am Oil Chem Soc, 2002, 79, 179-81.
233. G. Das and N. Karak, 'Mesua ferrea L. seed oil-based epoxy resins', J Appl Polym Sci, 2010, 118, 128-34.
234. G. Das and N. Karak, 'Thermostable and fl ame retardant Mesua ferrea L. seed oil based non-halogenated epoxy resin/clay nanocomposites', Prog Org Coat, 2010, 69, 495-503.
235. F. E. Okieimen, O. I. Bakare and C. O. Okieimen, 'Studies on the epoxidation of rubber seed oil', Ind Crops Products, 2002, 15, 139-44.
236. M. T. Benaniba, N. Belhaneche-Bensemra, G. Gelbard, 'Stabilization of PVC by epoxidized sunfl ower oil in the presence of zinc and calcium stearates', Polym Degrad Stabil, 2003, 82, 245-9.
237. E. Sharmin, S. M. Ashraf and S. Ahmad, 'Epoxidation, hydroxylation, acrylation and urethanation of Linum usitatissimum seed oil and its derivatives', Eur J Lipid Sci Technol, 2007, 109, 134-46.
238. S. Dinda, A. V. Patwardhan, V. V. Goud and N. C. Pradhan, 'Epoxidation of cotton-seed oil by aqueous hydrogen peroxide catalysed by liquid inorganic acids', Bioresource Technol, 2008, 99, 3737-44.
239. J. Chen, M. D. Soucek, W. J. Simonsick and R. W. Celikay, 'Synthesis and photopolymerization of norbornyl epoxidized linseed oil', Polymer, 2002, 43, 5379-89.
240. P. Muturi, D. Wang and S. Dirlikov, 'Epoxidized vegetable oils as reactive diluents I. Comparison of vernonia, epoxidized soybean and epoxidized linseed oils', Prog Org Coat, 1994, 25, 85-94.
241. V. V. Goud, N. C. Pradhan and A. V. Patwardhan, 'Epoxidation of karanja (Pongamia glabra) oil by H2O2', J Am Oil Chem Soc, 2006, 83, 635-40.
242. G. Das and N. Karak, 'Epoxidized Mesua ferrea L. seed oil-based reactive diluent for BPA epoxy resin and their green nanocomposites', Prog Org Coat, 2009, 66, 59-64.
243. G. Das and N. Karak, 'Epoxidized Mesua ferrea L. seed oil plasticized thermostable PVC and clay nanocomposites', J Vinyl Additive Technol, 2012, in press.
244. V. V. Goud, A. V. Patwardhan and N. C. Pradhan, 'Studies on the epoxidation of mahua oil (Madhumica indica) by hydrogen peroxide', Bioresource Technol, 2006, 97, 1365-71.
245. A. Köckritz, M. Blumenstein and A. Martin, 'Epoxidation of methyl oleate with molecular oxygen in the presence of aldehydes', Eur J Lipid Sci Technol, 2008, 110, 581-6.
246. V. V. Goud, A. V. Patwardhan, S. Dinda, and N. C. Pradhan, 'Kinetics of epoxidation of jatropha oil with peroxyacetic and peroxyformic acid catalysed by acidic ion exchange resin', Chem Eng Sci, 2007, 62, 4065-76.
247. A. O. Bouh and J. H. Espenson, 'Epoxidation reactions with urea-hydrogen peroxide catalyzed by methyltrioxorhenium(vii) on niobia', J Mol Catal A: Chemical, 2003, 200, 43-7.
248. S. Ahmad, F. Naqvi, E. Sharmin and K. L. Verma, 'Development of amine-acid cured Annona squamosa oil epoxy anticorrosive polymeric coatings', Prog Org Coat, 2006, 55, 268-75.
249. A. Shabeer, A. Garg, S. Sundararaman, K. Chandrashekhara, V. Flanigan and S. Kapila, 'Dynamic mechanical characterization of a soy-based epoxy resin system', J Appl Polym Sci, 2005, 98, 1772-80.
250. C. Cai, H. Dai, R. Chen, C. Su, X. Xu, S. Zhang and L. Yang, 'Studies on the kinetics of in situ epoxidation of vegetable oils', Eur J Lipid Sci Technol, 2008, 110, 341-6.
251. F. E. Okieimen, 'Studies in the utilisation of epoxidised vegetable oils as thermal stabiliser for polyvinyl chloride', Ind Crops Products, 2002, 15, 71-5.
252. A. Campanella and M. A. Baltanas, 'Degradation of the oxirane ring of Epoxidized vegetable oil in liquid-liquid system: 1. Hydrolysis and attack by H2O2', Latin Am Appl Res, 2005, 35, 205-10.
253. V. V. Goud, A. V. Patwardhan, S. Dinda and N. C. Pradhan, 'Epoxidation of karanja (Pongamia glabra) oil catalysed by acidic ion exchange resin', Eur J Lipid Sci Technol, 2007, 109, 575-84.
254. L. M. DeEspinosa, J. C. Ronda, M. Galia and V. Cadiz, 'A new enone-containing triglyceride derivative as precursor of thermosets from renewable resources', J Polym Sci Part A: Polym Chem, 2008, 46, 6843-50.
255. C. Orellana-Coca, S. Camocho, D. Adlercreutz, M. M. Andersson, B. Mattiasson and R. Hatti-Kaul, 'Chemo-enzymatic epoxidation of linoleic acid: Parameters infl uencing the reaction', Eur J Lipid Sci Technol, 2005, 107, 864-70.
256. J. Chen, M. D. Soucek, W. J. Simonsick and R. W. Celikay, 'Epoxidation of partially norbornylized linseed oil', Macromol Chem Phys, 2002, 203, 2042-57.
257. S. Zafar, F. Zafar, U. Riaz and S. Ahmad, 'Synthesis, characterization, and anticorrosive coating properties of waterborne interpenetrating polymer network based on epoxy-acrylic-oleic acid with butylated melamine formaldehyde', J Appl Polym Sci, 2009, 113, 827-38.
258. S. Zafar, F. Zafar, U. Riaz and S. Ahmad, 'Synthesis, characterization, and anticorrosive coating properties of waterborne interpenetrating polymer network based on epoxy-acrylic-oleic acid with butylated melamine formaldehyde', J Appl Polym Sci, 2009, 113, 827-38.
259. G. Lligadas, J. C. Ronda, M. Galia and V. Cadiz, 'Development of novel phosphorus-containing epoxy resins from renewable resources', J Polym Sci Part A: Polym Chem, 2006, 44, 6717-27.
260. G. Lligadas, J. C. Ronda, M. Galia and V. Cadiz, 'Synthesis and properties of thermosetting polymers from a phosphorous-containing fatty acid derivative', J Polym Sci Part A: Polym Chem, 2006, 44, 5630-44.
261. R. D. Ashby, T. A. Foglia, D. K. Y. Solaiman, C. K. Liu, A. Nunez and G. Eggink, 'Viscoelastic properties of linseed oil-based medium chain length poly(hydroxyalkanoate) fi lms: Effects of epoxidation and curing', Int J Biol Macromol, 2000, 27, 355-61.
262. L. Fu, L. Yang, C. Zhao and L. Ma, 'Thermal and mechanical properties of acrylated expoxidized-soybean oil-based thermosets', J Appl Polym Sci, 2010, 117, 2220-2225.
263. E. Sharmin, S. M. Ashraf and S. Ahmad, 'Synthesis, characterization, antibacterial and corrosion protective properties of epoxies, epoxy-polyols and epoxy-polyurethane coatings from linseed and Pongamia glabra seed oils', Int J Biol Macromol, 2007, 40, 407-22.
264. H. Esen, S. Kusefoglu and R. Wool, 'Photolytic and free-radical polymerization of monomethyl maleate esters of epoxidized plant oil triglycerides', J Appl Polym Sci, 2007, 103, 626-33.
265. S. M. Ashraf, S. Ahmad, U. Riaz, M. Alam and H. O. Sharma, 'Miscibility studies on linseed oil epoxy blend with poly(methacrylic acid)', J Appl Polym Sci, 2006, 99, 2512-19.
266. S. M. Ashraf, S. Ahmad, U. Riaz, A. Dev and R. Singhal, 'Miscibility and biodegradability studies of polystyrene/linseed oil epoxy blend derived from a sustainable resource', Iranian Polym J, 2007, 16, 469-76.
267. A. Shabeer, S. Sundararaman, K. Chandrashekhara and L. R. Dharani, 'Physicochemical properties and fracture behavior of soy-based resin', J Appl Polym Sci, 2007, 105, 656-63.
268. P. Czub, 'Synthesis of high-molecular-weight epoxy resins from modifi ed natural oils and bisphenol A or bisphenol A-based epoxy resins', Polym Adv Technol, 2009, 20, 194-208.
269. N. O. Shaker, E. M. Kandeel, E. E. Badr and M. M. El-Sawy, 'Synthesis and properties of renewable environment-friendly epoxy resins for surface coatings', J Dispersion Sci Technol, 2008, 29, 421-5.
270. S. J. Park, F. L. Jin and J. R. Lee, 'Synthesis and thermal properties of epoxidized vegetable oil', Macromol Rapid Commun, 2004, 25, 724-7.
271. F. L. Jin and S. J. Park, 'Thermomechanical behavior of epoxy resins modifi ed with epoxidized vegetable oils', Polym Int, 2008, 57, 577-83.
272. U. Konwar, G. Das and N. Karak, 'Mesua ferrea L. Seed oil based highly branched polyester and epoxy blends and their nanocomposites', J Appl Polym Sci, 2011, 121, 1076-85.
273. H. Miyagawa, M. Misra, L. T. Drzal and A. K. Mohanty, 'Fracture toughness and impact strength of anhydride-cured biobased epoxy', Polym Eng Sci, 2005, 45, 487-95.
274. L. K. Aggarwal, P. C. Thapliyal and S. R. Karade, 'Anticorrosive properties of the epoxy-cardanol resin based paints', Prog Org Coat, 2007, 59, 76-80.
275. C. Orellana-Coca, D. Adlercreutz, M. M. Andersson, B. Mattiasson and R. Hatti-Kaul, 'Analysis of fatty acid epoxidation by high performance liquid chromatography coupled with evaporative light scattering detection and mass spectrometry', Chem Phy Lipids, 2005, 135, 189-99.
276. J. D. Earls, J. E. White, L. C. López, Z. Lysenko, M. L. Dettloff and M. J. Null, 'Amine-cured ⌉-epoxy fatty acid triglycerides: Fundamental structure-property relationships', Polymer, 2007, 48, 712-19.
277. J. Zhu, K. Chandrashekhara, V. Flanigan and S. Kapila, 'Curing and mechanical characterization of a soy-based epoxy resin system', J Appl Polym Sci, 2004, 91, 1513-18.
278. F. E. Okieimen, C. Pavithran and I. O. Bakare, 'Epoxidation and hydroxylation of rubber seed oil: One-pot multi-step reactions', Eur J Lipid Sci Technol, 2005, 107, 330-6.
279. Y. C. Tu, H. Fan, G. J. Suppes and F. H. Hsieh, 'Physical properties of water-blown rigid polyurethane foams containing epoxidized soybean oil in different isocyanate indices', J Appl Polym Sci, 2009, 114, 2577-83.
280. P. K. T. Oldring and N. Turk (eds.), Polyamides. Resins for Surface Coatings, Vol. III, New York, Wiley, 2000.
281. R. P. Wool and X. S. Sun, Bio-Based Polymers and Composites, Elsevier, Amsterdam, 2005.
282. A. K. Mohanty, M. Misra and L. T. Drzal (eds.), Natural Fibers, Biopolymers and Biocomposites, CRC Press, Boca Raton, 2005.
283. V. Sharma and P. P. Kundu, 'Addition polymers from natural oils-A review', Prog Polym Sci, 2006, 31, 983-1008.
284. A. Rybak, P. A. Fokou and M. A. R. Meier, 'Metathesis as a versatile tool in oleochemistry', Eur J Lipid Sci Technol, 2008, 110, 797-804.
285. J. P. Jain, M. Sokolsky, N. Kumar and A. J. Domb, 'Fatty acid based biodegradable polymer', Polym Rev, 2008, 48, 156-91.
286. F. Li and R. C. Larock, 'Thermosetting polymers from cationic copolymerization of tung oil: Synthesis and characterization', J Appl Polym Sci, 2000, 78, 1044-56.
287. F. Li and R. C. Larock, 'New soybean oil-styrene-divinylbenzene thermosetting copolymers II: Dynamic mechanical properties', J Polym Sci Part B: Polym Phys, 2000, 38, 2721-38.
288. F. Li and R. C. Larock, 'Synthesis, structure and properties of new tung oil-styrene-divinylbenzene copolymers prepared by thermal polymerization', Biomacromolecules, 2003, 4, 1018-25.
289. P. P. Kundu and R. C. Larock, 'Novel conjugated linseed oil-styrenedivinylbenzene copolymers prepared by thermal polymerization 1: Effect of monomer concentration on the structure and properties', Biomacromolecules, 2005, 6, 797-806.
290. N. Alemdar, A. T. Erciyes and Y. Yagci, 'Styrenation of air-blown linseed oil by nitroxide-mediated radical polymerization', Prog Org Coat, 2010, 67, 55-9.
291. Y. Lu and R. C. Larock, 'Novel polymeric materials from vegetable oils and vinyl monomers: Preparation, properties, and applications', ChemSusChem, 2009, 2, 136-47.
292. F. Li and R. C. Larock, 'New soybean oil-styrene-divinylbenzene thermosetting copolymers I: Synthesis and characterization', J Appl Polym Sci, 2001, 80, 658-70.
293. M. Valverde, D. D. Andjelkovic, P. P. Kundu and R. C. Larock, 'Conjugated lowsaturation soybean oil thermosets: Free-radical copolymerization with dicyclopentadiene and divinylbenzene', J Appl Polym Sci, 2008, 107, 423-30.
294. P. H. Henna, D. D. Andjelkovic, P. P. Kundu and R. C. Larock, 'Biobased thermosets from the free-radical co-polymerization of conjugated linseed oil', J Appl Polym Sci, 2007, 104, 979-85.
295. J. Mallégol, J. Lemaire and J. L. Gardette, 'Drier infl uence on the curing of linseed oil', Prog Org Coat, 2000, 39, 107-13.
296. S. M. P. Meneghetti, R. F. de Souza, A. L. Monteiro and M. O. de Souza, 'Substitution of lead catalysts by zirconium in the oxidative polymerization of linseed oil', Prog Org Coat, 1998, 33, 219-24.
297. B. S. Rao and A. Palanisamy, 'Synthesis, photo curing and viscoelastic properties of triacrylate compositions based on ricinoleic acid amide derived from castor oil', Prog Org Coat, 2008, 63, 416-23.
298. B. S. Rao and A. Palanisamy, 'Photocuring and thermomechanical properties of multifunctional amide acrylate compositions derived from castor oil', Prog Org Coat, 2010, 67, 6-11.
299. T. Akbas, Ü. G. Beker, F. S. Güner, A. T. Erciyes and Y. Yagci, 'Drying and semidrying oil macromonomers, III. Styrenation of sunfl ower and linseed oils', J Appl Polym Sci, 2003, 93, 2373-6.
300. F. S. Guner, S. Usta, A. T. Erciyes and Y. Yagci, 'Styrenation of triglyeride oils by macromonomer technique', J Coat Technol, 2000, 72, 107-10.
301. R. C. Larock and M. W. Hanson, Lewis Acid-catalyzed Polymerization of Biological Oils and Resulting Polymeric Materials, US Pat. 6,211,315 (2001).
302. F. Li, M. V. Hanson and R.C. Larock, 'Soybean oil-divinylbenzene thermosetting polymers: Synthesis, structure, properties and their relationships', Polymer, 2001, 42, 1567-79.
303. P. P. Kundu and R. C. Larock, 'Effect of drying catalysts on the properties of thermal copolymers from conjugated linseed oil-styrene-divinylbenzene', Prog Org Coat, 2009, 65, 10-18.
304. T. Eren and S. H. Ksefoglu, 'Synthesis and characterization of copolymers of bromoacrylated methyl oleate', J Appl Polym Sci, 2004, 94, 2475-88.
305. S. P. Bunker and R. P. Wool, 'Synthesis and characterization of monomers and polymers for adhesives from methyl oleate', J Polym Sci Part A: Polym Chem, 2002, 40, 451-8.
306. D. P. Chatterjee and B. M. Mandal, 'Facile atom transfer radical homo and block copolymerization of higher alkyl methacrylates at ambient temperature using CuCl/PMDETA/quaternaryammonium halide catalyst system', Polymer, 2006, 47, 1812-19.
307. Y. Xia and R. C. Larock, 'Castor oil-based thermosets with varied crosslink densities prepared by ring-opening metathesis polymerization (ROMP)', Polymer, 2010, 51, 2508-14.
308. Y. Xia, Y. Lu and R. C. Larock, 'Ring-opening metathesis polymerization (ROMP) of norbornenyl-functionalized fatty alcohols', Polymer, 2010, 51, 53-61.
309. W. Jeong, T. C. Maulding, R.C. Larock and M. R. Kessler, 'Bio-based rubbers by concurrent cationic and ring-opening metathesis polymerization of a modifi ed linseed oil', Macromol Mater Eng, 2009, 294, 756-61.
310. P. H. Henna and R. C. Larock, 'Rubbery thermosets by ring-opening metathesis polymerization of a functionalized castor oil and cyclooctene', Macromol Mater Eng, 2007, 292, 1201-9.
311. H. Huang, R. Hoogenboom, M. A. M. Leenen, P. Guillet, A. M. Jonas, U. S. Schubert and J. F. Gohy, 'Solvent-induced morphological transition in corecross-linked block copolymer micelles', J Am Chem Soc, 2006, 128, 3784-8.
312. E. Can, S. H. Ksefoglu and R. P. Wool, 'Rigid, thermosetting liquid molding resins from renewable resources. I. Synthesis and polymerization of soy oil monoglyceride maleates', J Appl Polym Sci, 2001, 81, 69-77.
313. E. Can, S. H. Ksefoglu and R. P. Wool, 'Rigid thermosetting liquid molding resins from renewable resources. II. Copolymers of soybean oil monoglyceride maleates with neopentyl glycol and bisphenol A maleates', J Appl Polym Sci, 2002, 83, 972-80.
314. F. Li and R. C. Larock, 'New soybean oil-styrene-divinylbenzene thermosetting copolymers III: Tensile stress-strain behavior', J Polym Sci Part B: Polym Phys, 2001, 39, 60-77.
315. P. H. Henna, M. R. Kessler and R. C. Larock, 'Fabrication and properties of vegetable-oil-based glass fi ber composites by ring-opening metathesis polymerization', Macromol Mater Eng, 2008, 293, 979-90.
316. F. Li and R. C. Larock, 'New soybean oil-styrene-divinylbenzene thermosetting copolymers IV: Good damping properties', Polym Adv Technol, 2002, 13, 436-49.
317. N. Karak and S. Maiti, Dendrimers and Hyperbranched Polymers - Synthesis to Applications, MD Publications, New Delhi, 2008.
318. Y. Ishida, A. C. F. Sun, M. Jikei and M. Kakimoto, 'Synthesis of hyperbranched aromatic polyamides starting from dendrons as ABx monomers: Effect of monomer multiplicity on the degree of branching', Macromolecules, 2000, 33, 2832-8.
319. P. F. W. Simon and A. H. E. Muller, 'Synthesis of hyperbranched and highly branched methacrylates by self-condensing group transfer copolymerization', Macromolecules, 2001, 34, 6206-13.
320. J. Borah and N. Karak, 'Synthesis and characterization of a novel hyperbranched polyether', Polym Int, 2004, 53, 2026-30.
321. S. S. Mahapatra and N. Karak, 'Hyperbranched polyamine as multipurpose polymeric additives for LDPE and plasticized PVC', Eurasian Chem-Technol J, 2007, 9, 29-38.
322. J. Borah and N. Karak, 'Blends of triazine based hyperbranched polyether with LDPE and plasticized PVC', J Appl Polym Sci, 2007, 104, 648.
323. S. S. Mahapatra and N. Karak, 'Hyperbranched aromatic polyamines with striazine rings', J Appl Polym Sci, 2007, 106, 95-102.
324. U. Konwar and N. Karak, 'Mesua ferrea L. seed oil-based highly branched polyester resins', Polym Plastics Technol Eng, 2009, 48, 970-5.
325. U. Konwar, N. Karak and M. Mandal, 'Mesua ferrea L. seed oil-based highly thermostable and biodegradable polyester/clay nanocomposites', Polym Degrad Stabil, 2009, 94, 2221-30.
326. H. Deka and N. Karak, 'Shape-memory property and characterization of epoxy resin modifi ed Mesua ferrea L. seed oil based hyperbranched polyurethane', J Appl Polym Sci, 2010, 116, 106-15.
327. N. Karak, R. Konwarh and B. Voit, 'Catalytically active vegetable-oil based thermoplastic hyperbranched polyurethane/silver nanocomposites', Macromol Mater Eng, 2010, 295, 159-69.
328. U. Konwar and N. Karak, 'Hyperbranched polyether core containing vegetable oil modifi ed polyester and its clay nanocomposites', Polymer J, 2011, 43, 565-76.
329. B. Pettersson and K. Sörensen, 'High-solids alkyds based on hyperbranched (dendritic) polymers: A new concept with new opportunities', in Proceedings of the 21st Waterborne, High-solids and Powder Coatings Symposium, Vol. II, New Orleans, LA, 1994, 753-64.
330. J. Borah, S. S. Mahapatra, D. Saikia and N. Karak, 'Physical, thermal, dielectric and chemical properties of a hyperbranched polyether and its linear analog', Polym Degrad Stabil, 2006, 91, 2911-16.
331. C. Karakaya, G. Gunduz, L. Aras and I. A. Mecidoǧ lu, 'Synthesis of oil based hyperbranched resins and their modifi cation with melamine-formaldehyde resin', Prog Org Coat, 2007, 59, 265-73.
332. M. A. Elrehim, S. Said, A. Ghoneim and G. Turky, 'Dielectric properties of hyperbranched polyesteramide with long alkyl chain end groups', Macromol Symp, 2007, 254, 1-8.
333. N. Karak, S. Rana and J. W. Cho, 'Synthesis and characterization of castor oilmodifi ed hyperbranched polyurethanes', J Appl Polym Sci, 2009, 112, 736-43.
334. H. Deka and N. Karak, 'Bio-based hyperbranched polyurethanes for surface coating applications', Prog Org Coat, 2009, 66, 192-8.
335. N. Karak, B. Roy and B. Voit, 's-Triazine based hyperbranched polyethers: Synthesis, characterization and properties', J Polym Sci Part A: Polym Chem, 2010, 68, 3994-4004.
336. J. Samuelsson, P. Sundell and M. Johansson, 'Synthesis and polymerization of a radiation curable hyperbranched resin based on epoxy functional fatty acids', Prog Org Coat, 2004, 50, 193-8.
337. U. Konwar, G. Das and N. Karak, 'Mesua ferrea L. seed oil based highly branched polyester and epoxy blends and their nanocomposites', J Appl Polym Sci, 2011, 121, 1076-85.
338. S. S. Mahapatra and N. Karak, 'Hyperbranched polyamine: A promising agent for a vegetable oil based poly(ester-amide) resin', Prog Org Coat, 2007, 60, 328-34.
339. D. K. Chattopadhyay and D. C. Webster, 'Thermal stability and fl ame retardancy of polyurethanes', Prog Polym Sci, 2009, 34, 1068-133.
340. S. S. Mahapatra and N. Karak, 's-Triazine containing fl ame retardant hyperbranched Polyamines: synthesis, characterization and properties evaluation', Polym Degrad Stabil, 2007, 92, 947-55.
341. U. Konwar, N. Karak and T. Jana, 'Vegetable oil-based highly branched polyester modifi ed epoxy based low VOC high solid industrial paint', J Appl Polym Sci, 2011.
342. M. Johansson, T. Glauser, A. Jansson, A. Hult, E. Malmstrom and H. Claesson, 'Design of coating resins by changing the macromolecular architecture: Solid and liquid coating systems', Prog Org Coat, 2003, 48, 194-200.
343. G. Das and N. Karak, 'Epoxidized Mesua ferrea L. seed oil plasticized thermostable PVC and clay nanocomposites', J Vinyl Additive Technol, 2012, in Press.
344. G. Deka, H. Deka and N. Karak, 'Free radical scavenging magnetic iron-based nano-particles in hyperbranched and linear polymer matrices', J Macromol Polym Sci: PAC, 2009, 46, 1128-35.
345. R. P. Wool and X. S. Sun, Bio-based Polymers and Composites, Elsevier Academic Press, New York, 2005.
346. A. K. Mohanty, M. Misra and L. T. Drzal (eds), Natural Fibers, Biopolymers and Biocomposites, CRC Press, Taylor & Francis, Boca Raton, 2005.
347. C. Baillie (ed.), Green Composites Polymer Composites and the Environment, CRC Press, Boston, 2004.
348. D. N. Saheb and J. P. Jog, 'Natural fi ber polymer composites: A review', Adv Polym Technol, 1999, 18, 351-63.
349. A. K. Mohanty, M. Misra and G. Hinrichsen, 'Biofi bres, biodegradable polymers and biocomposites: An overview', Macromol Mater Eng, 2000, 276/277, 1-24.
350. K. Adekunle, D. Åkesson and M. Skrifvars, 'Biobased composites prepared by compression molding with a novel thermoset resin from soybean oil and a natural-fi ber reinforcement', J Appl Polym Sci, 2010, 116, 1759-65.
351. K. Chandrashekhara, S. Sundararaman, V. Flanigan and S. Kapila, 'Affordable composites using renewable materials', Mater Sci Eng A, 2005, 412, 2-6.
352. A. K. Mohanty, M. Misra and L. T. Drzal, 'Surface modifi cations of natural fi bers and performance of the resulting biocomposites: An overview', Polym Interfaces, 2001, 8, 313-17.
353. K. Adekunle, D. Åkesson and M. Skrifvars, 'Synthesis of reactive soybean oils for use as a biobased thermoset resins in structural natural fi ber composites', J Appl Polym Sci, 2010, 115, 3137-45.
354. M. I. Aranguren, M. A. Mosiewicki and J. Fernandez, 'Natural composites: Polymeric matrices based on vegetable resources', Mol Cryst Liq Cryst, 2006, 448, 145-59.
355. H. Kinoshita, K. Kaizu, M. Fukuda, H. Tokunaga, K. Koga and K. Ikeda, 'Development of green composite consists of woodchips, bamboo fi bers and biodegradable adhesive', Composites: Part B Eng, 2009, 40, 607-12.
356. S. Husic, I. Javni and Z. S. Petrovic, 'Thermal and mechanical properties of glass reinforced soy-based polyurethane composites', Compos Sci Technol, 2005, 65, 19-25.
357. M. A. Mosiewicki, G. A. Dell'Arciprete, M. I. Aranguren and N. E. Marcovich, 'Polyurethane foams obtained from castor oil-based polyol and fi lled with wood fl our', J Compos Mater, 2009, 43, 3057-72.
358. M. A. Mosiewicki, U. Casado, N. E. Marcovich and M. I. Aranguren, 'Vegetable oil based-polymers reinforced with wood fl our', Mol Cryst Liq Cryst, 2008, 484, 143-50.
359. Y. Chen, L. Zhang, R. Deng and H. Liang, 'Toughened composites prepared from castor oil based polyurethane and soy dreg by a one-step reactive extrusion process', J Appl Polym Sci, 2006, 101, 953-60.
360. R. V. Silva, D. Spinelli, W. W. Bose Filho, S. Claro Neto, G. O. Chierice and J. R. Tarpani, 'Fracture toughness of natural fi bers/castor oil polyurethane composites', Compos Sci Technol, 2006, 66, 1328-35.
361. S. Husic, I. Javni and Z. S. Petrovic, 'Thermal and mechanical properties of glass reinforced soy-based polyurethane composites', Compos Sci Technol, 2005, 65, 19-25.
362. S. Dutta, N. Karak and S. Baruah, 'Jute fi ber reinforced MFLSO based polyurethane green composites', J Appl Polym Sci, 2010, 115, 843-50.
363. M. A. Dweib, B. Hu, O'Donnell, H. W. Shenton and R. P. Wool, 'All natural composite sandwich beams for structural applications', Compos Struct, 2004, 63, 147-57.
364. A. O'Donnell, M. A. Dweib and R. P. Wool, 'Natural fi ber composites with plant oil-based resin', Compos Sci Technol, 2004, 64, 1135-45.
365. S. Khot, J. J. Lascala, E. Can, S. S. Morey, G. I. Williams, G. R. Palmese, S. H. Kusefoglu and R. P. Wool, 'Development and application of triglyceride-based polymers and composites', J Appl Polym Sci, 2001, 82, 703-23.
366. S. S. Morye and R. P. Wool, 'Mechanical properties of glass/fl ax hybrid composites based on a novel modifi ed soybean oil matrix material', Polym Compos, 2005, 26, 407-16.
367. C. K. Hong and R. P. Wool, 'Development of a bio-based composite material from soybean oil and keratin fi bers', J Appl Polym Sci, 2005, 95, 1524-38.
368. J. D. E. Pérez, D. P. Wiesenborn, D. M. Haagenson and R. L. Brudvik, 'Epoxy resins from high-oleic oils applied to composites', American Society of Agricultural and Biological Engineers Annual International Meeting 2009, Reno, NV, 1-14.
369. N. Boquillon, 'Use of an epoxidized oil-based resin as matrix in vegetable fi berreinforced composites', J Appl Polym Sci, 2006, 101, 4037-43.
370. Z. S. Liu, S. Z. Erhan, J. Xu and P. D. Calvert, 'Development of soybean oil-based composites by solid freeform fabrication method: Epoxidized soybean oil with bis- or polyalkyleneamine curing agents system', J Appl Polym Sci, 2002, 85, 2100-7.
371. Z. S. Liu, S. Z. Erhan and P. D. Calvert, 'Solid free form fabrication of soybean oil based composites reinforced with clay and fi bers'. J Am Oil Chem Soc, 2004, 81, 605-10.
372. Z. Liu, S. Z. Erhan, D. E. Akin and F. E. Barton, ' "Green" composites from renewable resources: Preparation of epoxidized soybean oil and fl ax fi ber composites', J Agric Food Chem, 2006, 54, 2134-7.
373. Z. S. Liu, S. Z. Erhan and P. D. Calvert, 'Solid freeform fabrication of epoxidized soybean oil/epoxy composites with di, tri, and polyethylene amine curing agents', J Appl Polym Sci, 2004, 93, 356-63.
374. N. Imai, H. Ueda, H. Kagevama and H. Uyama, 'Development of new bio-based composites using soybean oil as main component', Polym Preprints, 2006, 55, 5660-1.
375. M. Tatlari, C. A. Ulven, N. Sailer, D. P. Wiesenborn, K. Tostenson, P. Polansky and A. Krog, 'Vegetable oil-based epoxy/E-glass composite materals: Properties and synthesis', 38th SAMPE Fall Technical Conference: Global Advances in Materials and Process Engineering, Dallas, 2006.
376. Y. Lu and R. C. Larock, 'Corn oil-based composites reinforced with continuous glass fi bers: Fabrication and properties', J Appl Polym Sci, 2006, 102, 3345-53.
377. G. I. Williams and R. P. Wool, 'Composites from natural fi bers and soy oil resins', Appl Compos Mater, 2000, 7, 421-32.
378. G. Cao, Nanostructures and Nanomaterials: Synthesis, Properties and Applications, Imperial College Press, London, 2004.
379. N. Karak, 'Polymer (epoxy) clay nanocomposites', J Polym Mater, 2006, 23, 1-20.
380. U. Konwar, N. Karak and M. Mandal, 'Vegetable oil based highly branched polyester/clay silver nanocomposites as antimicrobial surface coating materials', Prog Org Coat, 2010, 68, 265-73.
381. S. Rana, N. Karak, J. W. Cho and Y. H. Kim, 'Enhanced dispersion of carbon nano-tubes in hyperbranched polyurethane and properties of nanocomposites', Nanotechnology, 2008, 19, 495707 (8 pp).
382. H. Deka and N. Karak, 'Vegetable oil based hyperbranched thermosetting polyurethane/ clay nanocomposites', Nanoscale Res Lett, 2009, 4, 758-65.
383. G. Das and N. Karak, 'Vegetable oil ased fl ame retardant epoxy/clay nanocomposites', Polym Degrad Stab, 2009, 94, 1948-54.
384. U. Konwar, N. Karak and M. Mandal, 'Mesua ferrea L. seed oil based highly thermostable and biodegradable polyester/clay nanocomposites', Polym Degrad Stab, 2009, 94, 2221-30.
385. N. Karak, R. Konwarh and B. Voit, 'Catalytically active vegetable-oil based thermoplastic hyperbranched polyurethane/silver nanocomposites', Macromol Mater Eng, 2009, 295, 159-69.
386. H. Deka and N. Karak, 'Infl uence of highly branched poly(amido amine) on the properties of hyperbranched polyurethane/clay nanocomposites', Mater Chem Phys, 2010, 124, 120-28.
387. W. H. Hoidy, M. B. Ahmad, E. A. Jaffar, A. Mulla and N. A. B. Ibrahim, 'Synthesis and characterization of organoclay from sodium montmorillonite and fatty hydroxamic acids', Am J Appl Sci, 2009, 6, 1567-72.
388. G. Das and N. Karak, 'Mesua ferrea L. seed oil based amido-amine modifi ed nano-clay/epoxy nanocomposites', J Appl Polym Sci, 2012, 124, 2403-13.
389. U. Konwar, G. Das and N. Karak, 'Mesua ferrea L. seed oil based highly branched polyester and epoxy blends and their nanocomposites', J Appl Polym Sci, 2011, 121, 1076-85.
390. U. Konwar, N. Karak and M. Mandal, 'Mesua ferrea L. seed oil based highly branched environment friendly polyester resin/clay nanocomposites', J Polym Environ, 2011, 91, 90-9.
391. U. Konwar and N. Karak, 'Hyperbranched polyether core containing vegetable oil modifi ed polyester and its clay nanocomposites', Polymer J, 2011, 43, 565-76.
392. J. Alam, U. Riaz and S. Ahmad, 'Nanostructured polyaniline reinforced sustainable resource (soy oil alkyd) based composites', Polym Compos, 2010, 31, 32-7.
393. V. Sharma, J. S. Banait, R. C. Larock and P. P. Kundu, 'Synthesis and characterization of linseed oil based nanocomposites', Polym Compos, 2010, 31, 630-7.
394. S. K. Dhoke and A. S. Khanna, 'Effect of nano-ZnO particles on the corrosion behaviour of alkyd-based waterborne coatings', Prog Org Coat, 2009, 64, 371-82.
395. H. Deka, N. Karak, R. D. Kalita and A. K. 'Buragohain, Biocompatible hyperbranched polyurethane/multi-walled carbon nanotube composites as shape memory materials', Carbon, 2010, 48, 2013-22.
396. H. Deka and N. Karak, 'Rheological study of vegetable oil based hyperbranched polyurethane/multi-walled carbon nanotube nanocomposites', Polym-Plastics Technol Eng, 2011, 50, 797-803.
397. H. Deka, N. Karak, R. D. Kalita and A. K. Buragohain, 'Bio-based thermostable, biodegradable and biocompatible hyperbranched polyurethane/Ag nanocomposites with antimicrobial activity', Polym Degrad Stab, 2010, 95, 1509-17.
398. T. Dongyan, Q. Liangsheng, J. Zheng and C. Weimin, 'Preparation, morphology, and thermoelectric property studies of BaTiO3 superfi ne fi ber/castor oil polyurethane-based IPN nanocomposites', J Appl Polym Sci, 2002, 84, 709-15.
399. H. Deka and N. Karak, 'Bio-based hyperbranched polyurethane/clay nanocomposites: Adhesive, mechanical and thermal properties', Polym Adv Technol 2011, 22, 973-80.
400. S. Dutta, N. Karak, J. P. Saikia and B. Konwar, 'Biocompatible epoxy modifi ed bio-based polyurethane nanocomposites: mechanical property, cytotoxicity and biodegradation', Bioresour Technol, 2009, 100, 6391-7.
401. G. Deka, H. Deka and N. Karak, 'Free radical scavenging magnetic iron-based nano-particles in hyperbranched and linear polymer matrices', J Macromol Polym Sci: PAC, 2009, 46, 1128-35.
402. M. Liu, Z. S. Petrovic and Y. Xu, 'Bio-based polyurethane-clay nanocomposite foams: syntheses and properties', Mater Res Soc Symp Proc, 2009, 1188, 1188-LL04-05.
403. D. Akram, S. Ahmad, E. Sharmin and S. Ahmad, 'Silica reinforced organic-inorganic hybrid polyurethane nanocomposites from sustainable resource', Macromol Chem Phys, 2009, 211, 412-19.
404. S. M. Ashraf, S. Ahmad and U. Riaz, 'Development of novel conducting composites of linseed-oil based poly(urethane amide) with nanostructured poly(1-naphthylamine)', Polym Int, 2007, 56, 1173-81.
405. S. M. Ashraf, S. Ahmad and U. Riaz, 'Development of sustainable resource-based nanostructured polyaniline/castor oil polyurethane composites', Adv Polym Technol, 2009, 28, 26-31.
406. G. Das and N. Karak, 'Epoxidized Mesua ferrea L. seed oil based reactive diluent for BPA epoxy resin and their green nanocomposites', Prog Org Coat, 2009, 66, 59-64.
407. G. Das and N. Karak, 'Thermostable and fl ame retardant Mesua ferrea L. seed oil based non-halogenated epoxy resin/clay nanocomposites', Prog Org Coat, 2010, 69, 495-503.
408. H. Uyama, M. Kuwabara, T. Tsujimoto, M. Nakano, A. Usuki and S. Kobayashi, 'Green nanocomposites from renewable resources: Plant oil-clay hybrid materials', Chem Mater, 2003, 15, 2492-4.
409. W. Thielemans, I. M. McAninch, V. Barron, W. J. Blau and R. P. Wool, 'Impure carbon nano-tubes as reinforcements for acrylated epoxidized soy oil composites', J Appl Polym Sci, 2005, 98, 1325-38.
410. V. Tanrattanakul and P. Saithai, 'Mechanical properties of bioplastics and bioplastic- organoclay nanocomposites prepared from epoxidized soybean oil with different epoxide contents', J Appl Polym Sci, 2009, 114, 3057-67.
411. M. Shibata, N. Teramoto, Y. Someya and S. Suzuki, 'Bio-based nanocomposites composed of photo-cured epoxidized soybean oil and supramolecular hydroxystearic acid nanofi bers', J Polym Sci Part B: Polym Phys, 2009, 47, 669-73.
412. J. Lu, C. K. Hong and R. P. Wool, 'Bio-based nanocomposites from functionalized plant oils and layered silicate', J Polym Sci Part B: Polym Phys, 2004, 42, 1441-50.
413. N. Jiratumnukul and R. Intarat, 'Ultraviolet-curable epoxidized sunfl ower oil/ organoclay nanocomposite coatings', J Appl Polym Sci, 2008, 110, 2164-7.
414. G. Lligadas, J. C. Ronda, M. Galià and V. Cádiz, 'Bionanocomposites from renewable resources: Epoxidized linseed oil-polyhedral oligomeric silsesquioxanes hybrid materials', Biomacromolecules, 2006, 12, 3521-6.
415. Y. Lu and R. C. Larock, 'Bio-based nanocomposites from corn oil and functionalized organoclay prepared by cationic polymerization', Macromol Mater Eng, 2007, 292, 863-72.
416. V. Sharma, J. S. Banait and P. P. Kundu, 'Swelling kinetics of linseed oil based nanocomposites', J Appl Polym Sci 2009, 114, 446-56.
417. H. Liu, L. Zhang, J. Li, D. Hauang, Y. Wang and Y. Li, 'Mechanical and thermal properties of nano-hydroxyapatite/polyurethane composites', Acta Materiae Compositae Sinica, 2010-03.
418. Q. Jia, S. Shan, Y. Wang and L. Gu, 'Tribological performance and thermal behavior of epoxy resin nanocomposites containing polyurethane and organoclay', Adv Polym Technol, 2008, 27, 859-64.