Structural engineering of polyurethane coatings for high performance applications

Progress in Polymer Science (Oxford)

Volumn 32, Issue 3, 2007, Pages 352-418

  Chattopadhyay, D K ^a   Raju, K V S N ^a  

^a INDIAN INSTITUTE OF CHEMICAL TECHNOLOGY   (India)

Author keywords

Coatings; High performance; Hyperbranched; Nanostructuring; Polyurethane

Indexed keywords

COATINGS; DISPERSIONS; FLAME RETARDANTS; FLUORINE CONTAINING POLYMERS; MONOMERS; NANOSTRUCTURED MATERIALS; SURFACE PROPERTIES;

CARBAMATE CHEMISTRY; HIGH PERFORMANCE; HYPERBRANCHED; NANOSTRUCTURING;

POLYURETHANES;

EID: 33847318838     PISSN: 00796700     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.progpolymsci.2006.05.003     Document Type: Review

References (489)

1. Bayer O. The diisocyanate polyaddition process (polyurethanes). Description of a new principle for building up high-molecular compounds. Angew Chem A59 (1947) 257
2. Wang F. Doctoral dissertation; polydimethylsiloxane modification of segmented thermoplastic polyurethanes and polyureas (1998), Virginia Polytechnic Institute and State University
3. Levchik S.V., and Weil E.D. Thermal decomposition, combustion and fire-retardancy of polyurethanes-a review of the recent literature. Polym Int 53 (2004) 1585-1610
4. Janischewski K, Reichel D. Aqueous two component polyurethane coatings, preparation thereof and use thereof. US patent 6048926, 2000.
5. Wicks Jr. Z.W. Blocked isocyanates. Prog Org Coat 3 (1975) 73-99
6. Wicks Jr. Z.W. New developments in the field of blocked isocyanates. Prog Org Coat 9 (1981) 3-28
7. Blencowe A., Clarke A., Drew M.G.B., Hayes W., Slark A., and Woodward P. Alternative syntheses of linear polyurethanes using masked isocyanate monomers. React Funct Polym 66 (2006) 1284-1295
8. Katsobashvili VYa, Babkin BM, Salnikova GA, Simonova NI, Eremina TN, Kulikova TN, et al. Blocked isocyanates. USSR patent 508449, 1976.
9. Rainer G, Johann O, Elmar W, Guenter D. Protective coating for glass surfaces. Ger Offen DE 2740253, 19790315, 1979.
10. Nasar A.S., Subramani S., and Radhakrishnan G. Synthesis and properties of imidazole-blocked diisocyanates. Polym Int 48 (1999) 614-620
11. Muhlebach A. Pyrazoles-a novel class of blocking agents for isocyanates. J Polym Sci: Part A: Polym Chem 32 (1994) 753-765
12. Goldstein SL, O'Connor JM, Lickei DL, Barnowski Jr HG, Burt WF, Blackwell RS. Low viscosity polyuretidione polyurethanes and their use as curatives for solvent and water borne coatings. US patent 5861193, 1999.
13. Saunders JH, Frisch KC. Polyurethanes: chemistry and technology, vol. XVI. High polymers, Part I. New York: Wiley; 1962.
14. Guo SH. Hydroxy-functional acrylate resins. US patent 5571884, 1996
15. Guo SH. Hydroxy-functional acrylate resins. US patent 5525693, 1996.
16. Wamprecht C, Sonntag M. Polyester polyols and their use as a binder component in two-component polyurethane coating compositions. US patent 6423816, 2002.
17. Santos D, Manuel A. Polyester polyols and their use as the polyol component in two-component polyurethane paints. US patent 6184332, 2001.
18. Brown D.W., Lowry R.E., and Smith L.E. Kinetics of hydrolytic aging of polyester urethane elastomers. Macromolecules 13 (1980) 248-252
19. Pegoretti A., Fambri L., Penati A., and Kolarik J. Hydrolytic resistance of model poly(ether urethane ureas) and poly(ester urethane ureas). J Appl Polym Sci 70 (1998) 577-586
20. Burdeniuc JJ, Kamzelski AZ. Blowing catalyst compositions containing hydroxyl and surface active groups for the production of polyurethane foams. European patent 1702913, 2006.
21. Roy S, Majumdar KK. Preparation of organo-tin catalyst useful for preparation of polyurethanes. Indian patent 194604, 2004.
22. Caillaud J.L., Deguillaume S., Vincent M., Giannotta J.C., and Widmaier J.M. Influence of a metallic filler on polyurethane formation. Polym Int 40 (1996) 1-7
23. Cooper S.L., and Tobolsky A.V. Anomalous depression of rubbery modulus through crosslinking. J Appl Polym Sci 11 (1967) 1361-1369
24. Dzierza W. Mechanical properties of crosslinked polyurethanes. J Appl Polym Sci 22 (1978) 1331-1342
25. Britain J.W., and Gemeinhardt P.G. Catalysis of the isocyanate-hydroxyl reaction. J Appl Polym Sci 4 (1960) 207-211
26. Lenz R.W. Organic chemistry of synthetic high polymers (1967), Interscience, New York [Chapter 7]
27. Sasaki N., Yokoyama T., and Tanaka T. Properties of isocyanurate-type crosslinked polyurethanes. J Polym Sci: Polym Chem Ed 11 (1973) 1765-1779
28. Hepburn C. Polyurethane elastomers. 2nd ed (1992), Elsevier, London, New York
29. Mayr A.E., Cook W.D., Edward G.H., and Murray G.J. Cure and properties of unfoamed polyurethanes based on uretonimine modified methylene-diphenyl diisocyanate. Polym Int 49 (2000) 293-301
30. ASTM Standard D16-00. Technology for paint, related coatings, materials, and applications
31. Dieterich D., Grigat E., Hahn W., Hespe H., and Schmelzer H.G. Principles of polyurethane chemistry and special applications. In: Oertel G. (Ed). Polyurethane handbook (1993), Hanser Publishers, Munich 11-53
32. Seymour R.W., and Cooper S.L. Viscoelastic properties of polyurethane block polymers. Adv Urethane Sci Technol 3 (1974) 66-80
33. Cooper S.L., and Tobolsky A.V. Properties of linear elastomeric polyurethanes. J App Polym Sci 10 (1966) 1837-1844
34. Schollenberger CS. Simulated vulcanizates of polyurethane elastomers. US patent 2871218, 1959.
35. Koutsky J.A., Hien N.V., and Cooper S.L. Some results on electron microscope investigations of polyether-urethane and polyester-urethane block copolymers. J Polym Sci: Part B: Polym Lett 8 (1970) 353-359
36. Miller J.A., Lin S.B., Hwang K.K.S., Wu K.S., Gibson P.E., and Cooper S.L. Properties of polyether-polyurethane block copolymers: effects of hard segment length distribution. Macromolecules 18 (1985) 32-44
37. Sanchez-Adsuar M.S., Papon E., and Villenave J.J. Influence of the synthesis conditions on the properties of thermoplastic polyurethane elastomers. J Appl Polym Sci 76 (2000) 1590-1595
38. Paik Sung C.S., Hu C.B., and Wu C.S. Properties of segmented poly(urethaneureas) based on 2,4-toluene diisocyanate. 1. Thermal transitions, X-ray studies, and comparison with segmented poly(urethanes). Macromolecules 13 (1980) 111-116
39. Sung C.S.P., Smith T.W., and Sung N.H. Properties of segmented polyether poly(urethaneureas) based of 2,4-toluene diisocyanate. 2. Infrared and mechanical studies. Macromolecules 13 (1980) 117-121
40. Adhikari R., Gunatillake P.A., McCarthy S.J., and Meijs G.F. Mixed macrodiol-based siloxane polyurethanes: effect of the comacrodiol structure on properties and morphology. J Appl Polym Sci 78 (2000) 1071-1082
41. Martin D.J., Meijs G.F., Gunatillake P.A., McCarthy S.J., and Renwick G.M. The effect of average soft segment length on morphology and properties of a series of polyurethane elastomers. II. SAXS-DSC annealing study. J Appl Polym Sci 64 (1997) 803-817
42. Wang C.B., and Cooper S.L. Morphology and properties of segmented polyether polyurethaneureas. Macromolecules 16 (1983) 775-786
43. Aitken R.R., and Jeffs G.M.F. Thermoplastic polyurethane elastomers based on aliphatic diisocyanates: thermal transitions. Polymer 18 (1977) 197-198
44. Seymour R.W., and Cooper S.L. Thermal analysis of polyurethane block polymers. Macromolecules 6 (1973) 48-53
45. Leung L.M., and Koberstein J.T. DSC annealing study of microphase separation and multiple endothermic behavior in polyether-based polyurethane block copolymers. Macromolecules 19 (1986) 706-713
46. Yoo S., Lee H.S., and Seo S.W. Orientation and phase separated structure of polyurethanes having various chemical structures. Pollimo 21 (1997) 459-467
47. Van Bogart J.W.V., Gibson P.E., and Cooper S.L. Structure-property relationships in polycaprolactone-polyurethanes. J Polym Sci: Polym Phys Ed 21 (1983) 65-95
48. Hartmann B., Duffy J.V., Lee G.F., and Balizer E. Thermal and dynamic mechanical properties of polyurethaneureas. J Appl Polym Sci 35 (1988) 1829-1852
49. Frontini P.M., Rink M., and Pavan A. Development of polyurethane engineering thermoplastics. II. Structure and properties. J Appl Polym Sci 48 (1993) 2023-2032
50. Stanford J.L., Still R.H., and Wilkinson A.N. Effects of soft-segment prepolymer functionality on structure-property relations in RIM copolyurethanes. Polymer 44 (2003) 3985-3994
51. Camargo R.E., Macosko C.W., Tirre U.M., and Wellinghoff S.T. Phase separation studies in rim polyurethanes catalyst and hard segment crystallinity effects. Polymer 26 (1985) 1145-1154
52. Nishimura H., Kojima H., Yarita T., and Nishiro M. Phase structure of polyetherpolyol-4,4 prime -diphenylmethane diisocyanate-based reaction injection molded (rim) polyurethanes. Polym Eng Sci 26 (1986) 585-592
53. Markovs R.A. Effect of polyol structure in diamine extended rim systems. J Cell Plast 21 (1985) 326-331
54. Petrovic Z.S., and Javni I. The effect of soft-segment length and concentration on phase separation in segmented polyurethanes. J Polym Sci: Part B: Polym Phys 27 (1989) 545-560
55. Stanford J.L., Still R.H., and Wilkinson A.N. Effects of soft segment prepolymer functionality on structure development in RIM copolymers. Polymer 36 (1995) 3555-3564
56. Paul C.J., Nair M.G.R., Koshy P., and Idage B.B. Segmented block copolymers of natural rubber and bisphenol A-toluene diisocyanate oligomers. J Appl Polym Sci 74 (1999) 706-721
57. Pandya M.V., Deshpande D.D., and Hundiwale D.G. Effect of diisocyanate structure on viscoelastic, thermal, mechanical and electrical properties of cast polyurethanes. J Appl Polym Sci 32 (1986) 4959-4969
58. Schneider N.S., Sung C.S.P., Matton R.W., and Illinger J.L. Thermal transition behavior of polyurethanes based on toluene diisocyanate. Macromolecules 8 (1975) 62-67
59. Speckhard R.A., Strate G.V., Gibson P.E., and Cooper S.L. Properties of polyisobutylene-polyurethane block copolymers: I. Macroglycols from ozonolysis of isobutylene-isoprene copolymer. Polym Eng Sci 23 (1983) 337-349
60. Chang S.L., Yu T.L., Huang C.C., Chen W.C., Linliu K., and Lin T.L. Effect of polyester side-chains on the phase segregation of polyurethanes using small-angle X-ray scattering. Polymer 39 (1998) 3479-3489
61. Bengston B., Feger C., Macknight W.J., and Schneider N.S. Thermal and mechanical properties of solution polymerized segmented polyurethanes with butadiene soft segments. Polymer 26 (1985) 895-900
62. Camberlin Y., Pascault J.P., Letoffe M., and Claudy P. Synthesis and DSC study of model hard segments from diphenyl methane diisocyanate and butane diol. J Polym Sci: Polym Chem Ed 20 (1982) 383-392
63. Blackwell J., Nagarajan M.R., and Haitink T.B. Structure of polyurethane elastomers: effect of chain extender length on the structure of MDI/diol hard segments. Polymer 23 (1982) 950-956
64. Hwang K.K.S., Wu G., Lin S.B., and Cooper S.L. Synthesis and characterization of MDI-butanediol urethane model compounds. J Polym Sci: Polym Chem Ed 22 (1984) 1677-1697
65. Eisenbach C.D., and Gunter C. Synthesis and properties of tailor-made hard segments and analogous segmented polyurethane elastomers. Proceedings of the ACS division of polymeric materials science and engineering 49 (1983) 239-243
66. Qin Z.Y., Macosko C.W., and Wellinghoff S.T. Synthesis and characterization of model urethane compounds. Macromolecules 18 (1985) 553-557
67. Briber R.M., and Thomas E.L. The structure of MDI/BDO-based polyurethanes: diffraction studies on model compounds and oriented thin films. J Polym Sci: Polym Phys Ed 23 (1985) 1915-1932
68. Tonelli C., Trombetta T., and Maccone P. Synthesis and physical characterization of model hard segments based on diphenyl methane diisocyanate and hydroquinone bis(2-hydroxyethyl) ether. J Polym Sci: Part A: Polym Chem 37 (1999) 1473-1487
69. Tonelli C., Trombetta T., Scicchitano M., Simeone G., and Ajroldi G. New fluorinated thermoplastic elastomers. J Appl Polym Sci 59 (1996) 311-327
70. Schollenberger C.S., and Dinbergs K.J. Thermoplastic urethane molecular weight-property relations. J Elastoplast 5 (1973) 222-251
71. Aneja A., and Wilkes G.L. On the issue of urea phase connectivity in formulations based on molded flexible polyurethane foams. J Appl Polym Sci 85 (2002) 2956-2967
72. Aneja A., Wilkes G.L., and Rightor E.G. Study of slabstock flexible polyurethane foams based on varied toluene diisocyanate isomer ratios. J Polym Sci Part B: Polym Phys 41 (2003) 258-268
73. Smith C.H., and Petersen C.A. Effect of diisocyanate structure on load-bearing properties of flexible urethan foams. SPE J 18/4 (1962) 455-459
74. Sung C.S.P., and Schneider N.S. Infrared studies of hydrogen bonding in toluene diisocyanate based polyurethanes. Macromolecules 8 (1975) 68-73
75. Nierzwicki W., and Walczynski B. Study of toluene diisocyanate-based polyurethanes of various isomer ratios. J Appl Polym Sci 41 (1990) 907-915
76. Barbeau P., Gerard J.F., Magny B., and Pascault J.P. Effect of the diisocyanate on the structure and properties of polyurethane acrylate prepolymers. J Polym Sci: Part B: Polym Phys 38 (2000) 2750-2768
77. Lipatova T.E., Shilov V.V., and Minenko N.N. The heterogeneous structure of polyurethane networks. Angew Makromol Chem 100 (1981) 99-115
78. Adsuar M.S.S., Papon E., and Villenave J.J. Influence of the synthesis conditions on the properties of thermoplastic polyurethane elastomers. J Appl Polym Sci 76 (2000) 1590-1595
79. Rogulska M., Podkościelny W., Kultys A., Pikus S., and Poździk E. Studies on thermoplastic polyurethanes based on new diphenylethane-derivative diols. I. Synthesis and characterization of nonsegmented polyurethanes from HDI and MDI. Eur Polym J 42 (2006) 1786-1797
80. Prisacariu C., Olley R.H., Caraculacu A.A., Bassett D.C., and Martin C. The effect of hard segment ordering in copolyurethane elastomers obtained by using simultaneously two types of diisocyanates. Polymer 44 (2003) 5407-5421
81. Hong J.L., Lillya C.P., and Chein J.C.W. Degree of phase separation in polyether-polyurethane copolymers with different chemical structures of hard segments. Polymer 33 (1992) 4347-4351
82. Pandya M.V., Deshpande D.D., and Hundiwale D.G. Thermal behavior of cast polyurethane elastomers. J Appl Polym Sci 35 (1988) 1803-1815
83. Vlajic M., Enes T., Aisa S., and Vahid S. Chemical structure and properties of polyurethane elastomers II. The effects of the chain extenders and crosslinkers on the properties of thermoplastic and thermosetting elastomers. Polimeri 11 (1990) 15-18
84. Petrovic Z.S., Javni I., and Divjakovic V. Structure and physical properties of segmented polyurethane elastomers containing chemical crosslinks in the hard segment. J Polym Sci: Part B: Polym Phys 36 (1998) 221-235
85. Liaw D.J. The relative physical and thermal properties of polyurethane elastomers: Effect of chain extenders of bisphenols, diisocyanate, and polyol structures. Appl Polym Sci 66 (1997) 1251-1265
86. Blackwell J., and Nagarajan M.R. Conformational analysis of poly(mdi-butandiol) hard segment in polyurethane elastomers. Polymer 22 (1981) 202-208
87. Blackwell J., Quay J.R., Nagarajan M.R., Born L., and Hespe H. Molecular parameters for the prediction of polyurethane structures. J Polym Sci: Polym Phys Edu 22 (1984) 1247-1259
88. Auten K.L., and Petrovic Z.S. Synthesis, structural characterization, and properties of polyurethane elastomers containing various degrees of unsaturation in the chain extenders. J Polym Sci: Part B, Polym Phys 40 (2002) 1316-1333
89. Barikani M., and Barmar M. Thermoplastic polyurethane elastomers: synthesis, and study of effective structural parameters. Iran Polym J 5 (1996) 231-235
90. Zawadski S.F., and Akcelrud L. HTPB-based polyurethanes: a correlation study between morphology and mechanical behaviour. Polym Int 42 (1997) 422-428
91. Minoura Y., Yamashita S., Okamoto H., Matsuo T., Izawa M., and Kohmoto S.I. Crosslinking and mechanical property of liquid rubber. I. Curative effect of aliphatic diols. J Appl Polym Sci 22 (1978) 1817-1844
92. Siegmann A., Cohen D., and Narkis M. Polyurethane elastomers containing polybutadiene and aliphatic diols: Structure-property relationships. Polym Eng Sci 27 (1987) 1187-1194
93. Yen M.S., Chen P.Y., and Tsai H.S. Synthesis, properties, and dyeing application of nonionic waterborne polyurethanes with different chain length of ethyldiamines as the chain extender. J Appl Polym Sci 90 (2003) 2824-2833
94. Ahn T.O., Jung S.U., Jeong H.M., and Lee S.W. Properties of polyurethanes with mixed chain extenders and mixed soft segments. J Appl Polym Sci 51 (1994) 43-49
95. Sperling L.H., Cooper S.L., and Tobolsky A.V. Elastomeric and mechanical properties of poly-m-carboranylenesiloxanes. J Appl Polym Sci 10 (1966) 1725-1735
96. Christenson C.P., Harthcock M.A., Meadows M.D., Spell H.L., Howard W.L., Creswick M.W., et al. Model MDI/butanediol polyurethanes: molecular structure, morphology, physical and mechanical properties. J Polym Sci Polym Phys Ed 24 (1986) 1404-1439
97. Mishra A.K., Chattopadhyay D.K., Sreedhar B., and Raju K.V.S.N. FT-IR and XPS studies of polyurethane-urea-imide coatings. Prog Org Coat 55 (2006) 231-243
98. Pimentel G.C., and Sederholm C.H. Correlation of infrared stretching frequencies and hydrogen bond distances in crystals. J Chem Phys 24 (1956) 639-641
99. Yu T.L., Lin T.L., Tsai Y.M., and Liu W.J. Morphology of polyurethanes with triol monomer crosslinked on hard segments. J Polym Sci: Part B, Polym Phys 37 (1999) 2673-2681
100. Masiulanis B., and Zielinski R. Mechanical, thermal, and electric properties of polyurethaneimide elastomers. J Appl Polym Sci 30 (1985) 2731-2741
101. Smith T.L., and Magnusson A.B. Diisocyanate-linked polymers. III. Relationships between the composition and ultimate tensile properties of some polyurethane elastomers. J Appl Polym Sci 5 (1961) 218-232
102. Haska S.B., Bayramli E., Pekel F., and Ozkar S. Mechanical properties of HTPB-IPDI-based elastomers. J Appl Polym Sci 64 (1997) 2347-2354
103. Kothandaraman H., Venkatarao K., and Thanoo B.C. Preparation, properties, and crosslinking studies on polyurethane elastomers. Polym J 21 (1989) 829-839
104. Kothandaraman H., Venkatarao K., and Thanoo B.C. Crosslinking studies of polyether-ester-based polyurethane systems. J Appl Polym Sci 39 (1990) 943-954
105. Consaga J.P., and French D.M. Properties of hydroxyl-terminated polybutadiene-urethane systems. J Appl Polym Sci 15 (1971) 2941-2956
106. Spirkova M., Matejka L., Hlavata D., Meissner B., and Pytela J. Polybutadiene-based polyurethanes with controlled properties: preparation and characterization. J Appl Polym Sci 77 (2000) 381-389
107. Kontou E., Spathis G., Niaounakis M., and Kefalas V. Physical and chemical cross-linking effects in polyurethane elastomers. Colloid Polym Sci 268 (1990) 636-644
108. Desai S., Thakore I.M., Sarawade B.D., and Devi S. Effect of polyols and diisocyanates on thermo-mechanical and morphological properties of polyurethanes. Eur Polym J 36 (2000) 711-725
109. Paulmer R.D.A., Shah C.S., Patni M.J., and Pandya M.V. Effect of crosslinking agents on the structure and properties of polyurethane millable elastomer composites. J Appl Polym Sci 43 (1991) 1953-1959
110. Chiou B.S., and Schoen P.E. Effects of crosslinking on thermal and mechanical properties of polyurethanes. J Appl Polym Sci 83 (2002) 212-223
111. Thomas O., Priester Jr. R.D., Hinze K.J., and Latham D.D. Effect of cross-link density on the morphology, thermal and mechanical properties of flexible molded polyurea/urethane foams and films. J Polym Sci: Part B: Polym Phys 32 (1994) 2155-2169
112. Dounis D.V., and Wilkes G.L. Influence of diethanolamine on hard segment ordering in flexible polyurethane foams. J Appl Polym Sci 65 (1997) 525-537
113. Petrovic Z.S., Ilavsky M., Dus¡;ek K., Vidakovic M., Javni I., and Banjanin B. Effect of crosslinking on properties of polyurethane elastomers. J Appl Polym Sci 42 (1991) 391-398
114. Petrovic Z.S., Javni I., and Banhegy G. Mechanical and dielectric properties of segmented polyurethane elastomers containing chemical crosslinks in the hard segment. J Polym Sci: Part B: Polym Phys 36 (1998) 237-251
115. Renz H., and Bruchmann B. Pathways targeting solvent-free PUR coatings. Prog Org Coat 43 (2001) 32-40
116. Hood J.D., Blount W.W., and Sade W.T. Polyester resin synthesis techniques for achieving lower VOC and improved coating performance. J Coat Technol 58 739 (1986) 49-52
117. Wicks Z.W., Jones F.N., and Pappas S.P. Organic coatings science and technology. Film formation, components, and appearance vol. I (1992), Wiley, New York [Chapter 8]
118. Belote S.N., and Blount W.W. Optimizing resins for low VOC. J Coat Technol 53 681 (1981) 33-37
119. Ni H., Daum J.L., Thiltgen P.R., Soucek M.D., Simonsick Jr. W.J., Zhong W., et al. Cycloaliphatic polyester-based high-solids polyurethane coatings: II. The effect of difunctional acid. Prog Org Coat 45 (2002) 49-58
120. Ludewig M, Weikard J, Stoeckel N. Allophanate-containing modified polyurethanes. US patent 0205911, 2006.
121. Kohlstruk S, Bockhoff I, Ewald M, Lomoelder R. Catalyst and process for preparing low-viscosity and color-reduced polyisocyanates containing isocyanurate groups. US patent 7001973, 2006.
122. Ewald M, Windmueller M, Poersch W, Kohlstruk S. Catalysts for preparing polyisocyanates containing isocyanurate groups, and their use. US patent 6875243, 2005.
123. Richter F.U., Schmitz J., Laas H.J., and Halpaap R. Catalysis in polyisocyanate manufacture. Polym Preprints 44 1 (2003) 46-47
124. Witzeman S.J., Nottingham D.W., and Rector F.D. Comparison of methods for the preparation of acetoacetylated coating resins. J Coat Technol 62 789 (1990) 101-112
125. Noomen A. Application of Michael addition chemistry in coatings technology. Prog Org Coat 32 (1997) 137-142
126. Clemens R.J., and Rector F.D. Comparison of catalysts for crosslinking acetoacetylated resins via the Michael reaction. J Coat Technol 61 770 (1989) 83-91
127. Rector F.D., Blount W.W., and Leonard D.R. Applications for acetoacetyl chemistry in thermoset coatings. J Coat Technol 61 771 (1989) 31-37
128. Yezrielev AI, Rigopoulos KR, Ryan RW, Kuo KK, Knudsen GA. Low viscosity, high solids polyesterdiols and compositions containing same. US patent 5976706, 1999.
129. Birnbrich B.V. Novel synthesis of low VOC polymeric dispersions and their application in waterborne coatings. Prog Org Coat 29 (1996) 31-38
130. Narayan R., Chattopadhyay D.K., Sreedhar B., and Raju K.V.S.N. Cure, viscoelastic and mechanical properties of hydroxylated polyester melamine high solids coatings. J Mater Sci 37 (2002) 4911-4918
131. Narayan R., and Raju K.V.S.N. Properties of acetoacetylated hydroxylated polyesters based polyurethane coatings. Prog Org Coat 45 (2002) 59-67
132. Narayan R., Chattopadhyay D.K., Sreedhar B., Raju K.V.S.N., Mallikarjuna N.N., and Aminabhavi T.M. Degradation profiles of polyester-urethane (hydroxylated polyester/diphenylmethane diisocyanate) and polyester-melamine (hydroxylated polyester/hexamethoxymethylmelamine) coatings: an accelerated weathering study. J Appl Polym Sci 97 (2005) 1069-1081
133. Narayan R., Chattopadhyay D.K., Sreedhar B., Raju K.V.S.N., Mallikarjuna N.N., and Aminabhavi T.M. Degradation profiles of polyester-urethane (HP-MDI) and polyester-melamine (HP-HMMM) coatings: a thermal study. J Appl Polym Sci 97 (2005) 518-526
134. Hofacker S, Gertzmann R, Fleck O, Ruttmann G, Brummer H. NCO prepolymers prepared from isophorone diisocyanate and having a low monomer content. US patent 6825376, 2004.
135. Hung JM, Graham M. Catalyst for reactive hot melt adhesives. US patent 5550191, 1996
136. Li Y, Lohrey JD. Moisture-curable polyurethane hot melt adhesives containing reactive amine catalysts. US patent 6635722, 2003.
137. Ni H., Skaja A.D., Sailer R.A., and Soucek M.D. Moisture-curing alkoxysilane-functionalized isocyanurate coatings. Macromol Chem Phys 201 (2000) 722-732
138. Chattopadhyay D.K., Sreedhar B., and Raju K.V.S.N. Effect of chain extender on phase mixing and coating properties of polyurethane ureas. Ind Eng Chem Res 44 (2005) 1772-1779
139. Chattopadhyay D.K., Sreedhar B., and Raju K.V.S.N. Thermal stability of chemically crosslinked moisture-cured polyurethane coatings. J Appl Polym Sci 95 (2005) 1509-1518
140. Chattopadhyay D.K., Sreedhar B., and Raju K.V.S.N. Influence of varying hard segments on the properties of chemically crosslinked moisture cured polyurethane urea. J Polym Sci Part B: Polym Phys 44 (2006) 102-118
141. Chattopadhyay D.K., Prasad P.S.R., Sreedhar B., and Raju K.V.S.N. The phase mixing of moisture cured polyurethane-urea during cure. Prog Org Coat 54 (2005) 296-304
142. Chattopadhyay D.K., Panda S.S., and Raju K.V.S.N. Properties of diamine chain extended polyurethane-urea coatings. Jpn J Color Mater., Shikazai 77 (2004) 540-547
143. Chattopadhyay D.K., and Raju K.V.S.N. Effect of synthetic ingredients on the coating properties of moisture cured polyurethane-ureas. Paintindia 55 8 (2005) 47-56
144. Chattopadhyay D.K., Sreedhar B., and Raju K.V.S.N. The phase mixing studies on moisture cured crosslinked poly-urethane-ureas during cure. Polymer 47 (2006) 3814-3825
145. Chou CY, Jones AT, Johnson TL. Moisture scavenging oxazolidines. US patent 5264148, 1993
146. Chou CY, Malocha RE, Nocito V. Moisture-scavenging iminoalcohol-oxazolidine mixtures. US patent 5223174, 1993
147. Yang HS, Hung PLK. Method for scavenging moisture in polyisocyanates and formulations thereof. US patent 6291577, 2001.
148. Yeganeh H., and Shamekhi M.A. Poly(urethane-imide-imide), a new generation of thermoplastic polyurethane elastomers with enhanced thermal stability. Polymer 45 (2004) 359-365
149. Liao D.C., and Heieh K.H. Synthesis and characterization of bismaleimides derived from polyurethanes. J Polym Sci: Part A Polym Chem 32 (1994) 1665-1672
150. Mishra A.K., Chattopadhyay D.K., Sreedhar B., and Raju K.V.S.N. Thermal and dynamic mechanical characterization of polyurethane-urea-imide coatings. J Appl Polym Sci 102 (2006) 3158-3167
151. Lin M.F., Shu Y.C., Tsen W.C., and Chuang F.-S. Synthesis of polyurethane-imide (PU-imide) copolymers with different dianhydrides and their properties. Polym Int 48 (1999) 433-445
152. Patel H.S., and Vyas H.S. Poly(urethane-imide)s-1. Europ Polym J 27 (1991) 93-96
153. Patel H.S., Shah V.J., and Vyas H.S. Synthesis, characterization and glass reinforcement of poly(urethane-imide)s-III. High Perform Polym 4 (1992) 247-258
154. Zuo M., and Takeichi T. Novel method for the preparation of poly(urethane-imide)s and their properties. J Polym Sci A: Polym Chem 35 (1997) 3745-3753
155. Ataei S.M., and Keshavarz S. Synthesis and characterization of novel diimide-dinaphthols and resulting poly(urethane-imide)s. Polym Int 52 (2003) 1487-1492
156. Gnanarajan T.P., Nasar S.A., Iyer N.P., and Radhakrishnan G. Synthesis of poly(urethane-imide) using aromatic secondary amine-blocked polyurethane prepolymers. J Polym Sci A: Polym Chem 38 (2000) 4032-4037
157. Iyer N.P., Gnanarajan T.P., and Radhakrishnan G. Mechanical and thermal properties of networks prepared from reactive poly(urethane-imide)s and blocked polyurethane prepolymer. Macromol Chem Phys 203 (2002) 712-717
158. Primeaux DJ, Zimmerman RL, Hillman KM. Method of preparing spray elastomer systems. US patent 6605684, 2003.
159. Roesler RR, Squiller EP. Polyurea coatings from dimethyl-substituted polyaspartic ester mixtures. US patent 6482333, 2002.
160. Roesler RR, Squiller EP. Polyurea coatings from dimethyl-substituted polyaspartic ester mixtures. US patent 6458293, 2002.
161. Wicks DA, Yeske PE. Polyurea coating compositions having improved pot lives. US patent 5243012, 1993.
162. Wicks DA, Yeske PE. Control of the reaction between polyaspartic esters and aliphatic polyisocyanates. Proceedings water-borne and higher solids and powder coatings symposium, New Orleans LA, 24-26 February 1993.
163. Hansen RG, Moren DM, Purgett MD. Secondary aspartic acid amide esters. US patent 6469199, 2002.
164. Howarth G.A. Polyurethanes, polyurethane dispersions and polyureas: past, present and future. Surf Coat Int Pt B: Coat Trans 86 2 (2003) 111-118
165. Freiter ER. Epoxy resin coating composition. US patent 4020034, 1977.
166. Hoeschele GK. Heat-activatable polyurethane powder coatings. US patent 4069208, 1978.
167. Ohrbom WH, December TS. Powder coatings containing oxirane groups beta to urethane or urea groups. US patent 6849337, 2005.
168. Edwards P.A., Striemer G., and Webster D.C. Novel polyurethane coating technology through glycidyl carbamate chemistry. JCT Res 2 7 (2005) 517-527
169. Edwards P.A., Striemer G., and Webster D.C. Synthesis, characterization and self-crosslinking of glycidyl carbamate functional resins. Prog Org Coat 57 (2006) 128-139
170. Studer K., Decker C., Beck E., and Schwalm R. Overcoming oxygen inhibition in UV-curing of acrylate coatings by carbon dioxide inerting, Part I. Prog Org Coat 48 (2003) 92-100
171. Ong IW, Julia M, Wilson CB, Robert S. Antimicrobial radiation curable coating. US patent 7098256, 2006.
172. Price N.L. Free radical and cationic photoinitiators in ultraviolet light curable coatings. J Coat Technol 67 849 (1995) 27-34
173. Krajnik JM, Olesen KR, Vandezande GA. Waterborne coating having improved chemical resistance. US patent 6869996, 2005.
174. Hart RE. Water-based, solvent-free or low VOC, two-component polyurethane coatings. US patent 5693703, 1997.
175. Dieterich D. Aqueous emulsions, dispersions and solutions of polyurethanes; synthesis and properties. Prog Org Coat 9 (1981) 281-340
176. Barni A., and Levi M. Aqueous polyurethane dispersions: A comparative study of polymerization processes. J Appl Polym Sci 88 (2003) 716-723
177. Rosthauser J.W., and Nachtkamp K. Waterborne polyurethanes. In: Frisch K.C., and Klempner D. (Eds). Advances in urethane Science and technology vol. 10 (1987), Technomic Publishing, Lancaster, PA 121-162
178. Yang C.H., Lin S.M., and Wen T.C. Application of statistical experimental strategies to the process optimization of waterborne polyurethane. Polym Eng Sci 35 (1995) 722-730
179. Chinwanitcharoen C., Kanoh S., Yamada T., Hayashi S., and Sugano S. Preparation of aqueous dispersible polyurethane: effect of acetone on the particle size and storage stability of polyurethane emulsion. J Appl Polym Sci 91 (2004) 3455-3461
180. Anderle GA, Lenhard SL, Lubnin AV, Snow GE, Tamareselvy K. Plasticized waterborne polyurethane dispersions and manufacturing process. US patent 2002028875, 2002.
181. Lorenz V.O., Haulena F., and Kleborn D. Zum kautschukelastischen verhalten von polyurethan-ionomeren. Die Angew Macromol Chemie 33 (1973) 159-175
182. Lorenz O., and Hick H. Einfluß von lösungsmitteln auf den partikeldurchmesser von dispersionen anionischer polyurethanionomerer. Die Angew Macromol Chemie 72 (1978) 115-123
183. Zhu Y., and Sun D.-X. Preparation of silicon dioxide/polyurethane nanocomposites by a sol-gel process. J Appl Polym Sci 92 (2004) 2013-2016
184. Kim B.K., Kim T.K., and Jeong H.M. Aqueous dispersion of polyurethane anionomers from H12MDI/IPDI, PCL, BD, and DMPA. J Appl Polym Sci 53 (1994) 371-378
185. Chen Y., and Chen Y.L. Aqueous dispersions of polyurethane anionomers: effects of counteraction. J Appl Polym Sci 46 (1992) 435-443
186. Narayan R., Chattopadhyay D.K., Sreedhar B., Raju K.V.S.N., Mallikarjuna N.N., and Aminabhavi T.M. Synthesis and characterization of crosslinked polyurethane dispersions based on hydroxylated polyesters. J Appl Polym Sci 99 (2006) 368-380
187. Lai J.Z., Ling H.J., Yeh J.T., and Chen K.N. Polymer hybrids from self-emulsified PU anionomer and water-reducible acrylate copolymer via a postcuring reaction. J Appl Polym Sci 90 (2003) 3578-3587
188. Chen G.N., and Chen K.N. Self-curing behaviors of single pack aqueous-based polyurethane system. J Appl Polym Sci 63 (1997) 1609-1623
189. Chen G.-N., and Chen K.-N. Dual-curing of anionic aqueous-based polyurethanes at ambient temperature. J Appl Polym Sci 67 (1998) 1661-1671
190. Munir A., and Goethals E.J. Reactions of cationic living poly(tert-butyl aziridine). J Polym. Sci Part A: Polym Chem Ed 19 (1981) 1985-1994
191. Lai J.Z., Ling H.J., Yeh J.T., and Chen K.N. New self-curable, aqueous-based polyurethane system by an isophorone diisocyanate/uretedione aziridinyl derivative process. J Appl Polym Sci 94 (2004) 845-859
192. Hourston D.J., Williams G.D., Satguru R., Padget J.C., and Pears D. The influence of the degree of neutralization, the ionic moiety, and the counterion on water-dispersible polyurethanes. J Appl Polym Sci 74 (1999) 556-566
193. Son S.H., Lee H.J., and Kim J.H. Effects of carboxyl groups dissociation and dielectric constant on particle size of polyurethane dispersions. Colloids Surf A Physicochem Eng Aspects 133 (1998) 295-301
194. Kim B.K., and Lee J.C. Polyurethane ionomer dispersions from poly(neopentylene phthalate) glycol and isophorone diisocyanate. Polymer 37 (1996) 469-475
195. Lee S.Y., Lee J.S., and Kim B.K. Preparation and properties of water-borne polyurethanes. Polym Int 42 (1997) 67-76
196. Mequanint K., and Sanderson R.D. Phosphated polyurethane dispersions: synthesis, emulsification mechanisms and the effect of the neutralising base. Macromol Symp 178 (2002) 117-130
197. Hourston D.J., Williams G., Satguru R., Padget D.J., and Pears D. Structure-property study of polyurethane anionomers based on various polyols and diisocyanates. J Appl Polym Sci 66 (1997) 2035-2044
198. Barret K.E.J. Dispersion polymerization in organic media (1975), Wiley-Interscience, New York
199. Martin GE. Urethane nonaqueous dispersion for automotive base coat/clear coat applications. US patent 4705839, 1987.
200. Radhakrishnan B., Cloutet E., and Cramail H. Synthesis of uniform polyurethane particles by step growth polymerization in a dispersed medium. Colloid Polym Sci 280 (2002) 1122-1130
201. Yabuuchi N, Imamura T, Mukae T, Ishii K. Method of preparing microcapsules. US patent 5603986, 1997.
202. Dahotre B.D., Kadolkar P., and Shah S. Refractory ceramic coatings: processes, systems and wettability/adhesion. Surf Interface Anal 31 (2001) 659-672
203. Johansson M., Glauser T., Jansson A., Hult A., Malmström E., and Claesson H. Design of coating resins by changing the macromolecular architecture: solid and liquid coating systems. Prog Org Coat 48 (2003) 194-200
204. Swaminathan R. High-solids thermoset binders formed using hyperbranched polyols as reactive intermediates, coating compositions formed therewith, and methods of making and using same. US patent 6646049, 2003.
205. Kim H.Y. Hyperbranched polymers 10 years after. J Polym Sci: Part A: Polym Chem 36 (1998) 1685-1698
206. Malmström E., Johansson M., and Hult A. Hyperbranched aliphatic polyesters. Macromolecules 28 (1995) 1698-1703
207. Malmström E., Johansson M., and Hult A. The effect of terminal alkyl chains on hyperbranched polyesters based on 2,2-bis(hydroxymethyl)propionic acid. Macromol Chem Phys 197 (1996) 3199-3207
208. Hawker C.J., and Chu F. Hyperbranched poly(ether ketones): manipulation of structure and physical properties. Macromolecules 29 (1996) 4370-4380
209. Schmaljohann D., Haußler L., Potschke P., Voit B.I., and Loont-jens T.J.A. Modification with alkyl chains and the influence on thermal and mechanical properties of aromatic hyperbranched polyesters. Macromol Chem Phys 201 (2000) 49-57
210. Tomalia D.A., Naylor A.M., and Goddard W.A. Starburst dendrimers: molecular-level control of size, shape, surface chemistry, topology, and flexibility from atoms to macroscopic matter. Angew Chem Int Ed Engl 29 (1990) 138-175
211. Newkome G.R., Mooreld C.N., and Vogtle F. Dendritic macromolecules: concept synthesis perspectives (1996), Weinheim, VCH
212. Zeng F., and Zimmerman S.C. Dendrimers in supramolecular chemistry: from molecular recognition to self-assembly. Chem Rev 97 (1997) 1681-1712
213. Kim Y.H., and Webster O.W. Hyperbranched polymers. In: Mishra M.K., and Kobayashi S. (Eds). Star and hyperbranched polymers (1999), Marcel Dekker Inc., New York 201-238
214. Jiang D.L., and Aida T. Dendritic polymers: optical and photochemical properties. In: Fréchet J.M.J., and Tomalia D.A. (Eds). Dendrimers and other dendritic polymers (2001), Wiley, West Sussex 425-439
215. Peerlings H.W.I., Van Benthem R.A.T.M., and Meijer E.W. Fast and convenient construction of carbamate/urea-based dendrimers with a diisocyanate building block. J Polym Sci Part A: Polym Chem 39 (2001) 3112-3120
216. Sunder A., Heinemann J., and Frey H. Controlling the growth of polymer trees: concepts and perspectives for hyperbranched polymers. Chem-A: Euro J 6 (2000) 2499-2506
217. Johansson M., Malmström E., and Hult A. Synthesis, characterization, and curing of hyperbranched allyl ether-maleate functional ester resins. J Polym Sci, Part A: Polym Chem Ed 31 (1993) 619-624
218. Holter D., Burgath A., and Frey H. Degree of branching in hyperbranched polymers. Acta Polym 48 (1997) 30-35
219. Tomalia D.A., and Frechet J.M.J. Discovery of dendrimers and dendritic polymers: a brief historical perspective. J Polym Sci Part A: Polym Chem 40 (2002) 2719-2728
220. Voit B. New developments in hyperbranched polymers. J Polym Sci Part A: Polym Chem 38 (2000) 2505-2525
221. Voit B. Hyperbranched polymers-all problems solved after 15 years of research?. J Polym Sci Part A: Polym Chem 43 (2005) 2679-2699
222. 2B* monomers. J Polym Sci Part A: Polym Chem 42 (2004) 3062-3081
223. ® hyperbranched polyesteramides. J Polym Sci Part A: Polym Chem 42 (2004) 3110-3115
224. Teertstra S.J., and Gauthier M. Dendrigraft polymers: macromolecular engineering on a mesoscopic scale. Prog Polym Sci 29 (2004) 277-327
225. Tomalia D.A. Birth of a new macromolecular architecture: dendrimers as quantized building blocks for nanoscale synthetic polymer chemistry. Prog Polym Sci 30 (2005) 294-324
226. Hawker C.J., Lee R., and Frechet J.M.C. One-step synthesis of hyperbranched dendritic polyesters. J Am Chem Soc 113 (1991) 4583-4588
227. Bruchmann B., Koniger R., and Renz H. Tailor-made crosslinkers for high performance PUR coatings-hyperbranched polyisocyanates. Macromol Symp 187 (2002) 271-279
228. Kricheldorf H.R., and Schwarz G. Cyclic polymers by kinetically controlled step-growth polymerization. Macromol Rapid Commun 24 (2003) 359-381
229. Jikei M., Chon S.H., Kakimoto M.A., Kawauchi S., Imase T., and Watanabe J. Synthesis of hyperbranched aromatic polyamide from aromatic diamines and trimesic acid. Macromolecules 32 (1999) 2061-2064
230. 3 approach to hyperbranched aliphatic polyethers containing chain end epoxy substituents. Macromolecules 32 (1999) 6380-6382
231. Fang J., Kita H., and Okamoto K.-I. Hyperbranched polyimides for gas separation applications. 1. Synthesis and characterization. Macromolecules 33 (2000) 4639-4646
232. Flory P.J. Principles of polymer chemistry. Configurational and frictional properties of the polymer molecule in dilute solution (1953), Cornell University Press, Ithaca, New York [Chapter 9]
233. f-1 type units. J Am Chem Soc 74 (1952) 2718-2723
234. Flory P.J. Molecular size distribution in three dimensional polymers. I. Gelation. J Am Chem Soc 63 (1941) 3083-3090
235. Flory P.J. Molecular size distribution in three dimensional polymers. II. Trifunctional branching units. J Am Chem Soc 63 (1941) 3091-3096
236. Flory P.J. Molecular size distribution in three dimensional polymers. III. Tetrafunctional branching units. J Am Chem Soc 63 (1941) 3096-3100
237. n" approach to hyperbranched polymers with alternating ureido and urethano units. Macromolecules 36 (2003) 613-620
238. Gao C., and Yan D. Hyperbranched polymers: from synthesis to applications. Prog Polym Sci 29 (2004) 183-275
239. 2 approach. A simple and convenient synthetic strategy towards hyperbranched polyurea-urethanes. e-Polymers 014 (2003)
240. 2B* monomers. J Polym Sci Part A: Polym Chem 42 (2004) 3062-3081
241. McKee M.G., Unal S., Wilkes G.L., and Long T.E. Branched polyesters: recent advances in synthesis and performance. Prog Polym Sci 30 (2005) 507-539
242. Spindler R., and Frechet J.M.J. Synthesis and characterization of hyperbranched polyurethanes prepared from blocked isocyanate monomers by step-growth polymerization. Macromolecules 26 (1993) 4809-4813
243. Huybrechts J., and Dusek K. Star oligomers for low VOC polyurethane coatings. Surf Coatings Int 81 3 (1998) 117-127
244. Johansson M., and Hult A. Kinetics of formation of hyperbranched polyesters based on 2,2-bis(methylol)propionic acid. Macromolecules 29 (1996) 1222-1228
245. Malmstroem E., and Hult A. Hyperbranched polymers: a review. J Macromol Sci-Rev Macromol Chem Phys 37 (1997) 555-579
246. 2′-type monomers, 3. Polyaddition of N-methyl-1,3-propanediamine to divinyl sulfone. Macromol Chem Phys 202 (2001) 2623-2629
247. Ziemer A., Azizi M., Pleul D., Simon F., Michel S., Kreitschmann M., et al. Influence of hyperbranched polyesters on the surface tension of polyols. Langmuir 20 (2004) 8096-8102
248. Goswami A., and Singh A.K. Hyperbranched polyester having nitrogen core: synthesis and applications as metal ion extractant. React Funct Polym 61 (2004) 255-263
249. Qiu T., Tang L., Fu Z., Tuo X., Li Y., Liu D., et al. Modification of end-groups of aliphatic hyperbranched polyester. Polym Adv Technol 15 (2004) 65-69
250. Chikh L., Arnaud X., Guillermain C., Tessier M., and Fradet A. Cyclizations in hyperbranched aliphatic polyesters and polyamides. Macromol Symp 199 (2003) 209-221
251. Pavlova E., Voit B., Duskova S.M., and Dusek K. Novel hyperbranched polymers for polyurethane coatings: their preparation and crosslinking with polyisocyanates. Polym Preprints 45 2 (2004) 217-218
252. Stumbe J.F., and Bruchmann B. Hyperbranched polyesters based on adipic acid and glycerol. Macromol Rapid Commun 25 (2004) 921-924
253. Frey H., and Haag R. Dendritic polyglycerol: a new versatile biocompatible material. Rev Mol Biotechnol 90 (2002) 257-267
254. Sunder A., Frey H., and Mulhaupt R. Hyperbranched polyglycerols by ring-opening multibranching polymerization. Macromol Symp 153 (2000) 187-196
255. Xinling W., Jianjun C., Ling H., and Xiaozhen T. Synthesis and ionic conductivity of hyperbranched poly(glycidol). J Polym Sci Part B: Polym Phys 39 (2001) 2225-2230
256. Xiaoying S., Xiaohui Y., Yunhang L., and Xinling W. Synthesis and characterization of a multiarm star polymer. J Polym Sci Part A: Polym Chem 42 (2004) 2356-2364
257. Zhai X., Peleshanko S., Klimenko N.S., Genson K.L., Vaknin D., Vortman M.Y., et al. Amphiphilic dendritic molecules: hyperbranched polyesters with alkyl-terminated branches. Macromolecules 36 (2003) 3101-3110
258. Ming W., Melis F., van de Grampel R.D., van Ravenstein L., Tian M., and van der Linde R. Low surface energy films based on partially fluorinated isocyanates: the effects of curing temperature. Prog Org Coat 48 (2003) 316-321
259. 2-type hyperbranched polyamides. Euro Polym J 39 (2003) 1201-1208
260. 2 monomer to form hyperbranched aromatic polyamide. Macromolecules 31 (1998) 5964-5966
261. Yang G., Jikei M., and Kakimoto M.A. Synthesis and properties of hyperbranched aromatic polyamide. Macromolecules 32 (1999) 2215-2220
262. Malmström E., Hult A., and Gedde U.W. Relaxation processes in hyperbranched polyesters: influence of terminal groups. Polymer 38 (1997) 4873-4879
263. Wei H., Lu Y., Shi W., Yuan H., and Chen Y. UV curing behavior of methacrylated hyperbranched poly(amine-ester)s. J Appl Polym Sci 80 (2001) 51-57
264. Kou H., Asif A., and Shi W. Photopolymerization kinetics of hyperbranched acrylated aromatic polyester. J Appl Polym Sci 89 (2003) 1500-1504
265. Johansson M., Glaser T., Rospo G., and Hult A. Radiation curing of hyperbranched polyester resins. J Appl Polym Sci 75 (2000) 612-618
266. Lange J., Stenroos E., Johansson M., and Malmstrom E. Barrier coatings for flexible packaging based on hyperbranched resins. Polymer 42 (2001) 7403-7410
267. Claesson H., Scheurer C., Malmstrom E., Johansson M., Hult A., Paulus W., et al. Semi-crystalline thermoset resins: tailoring rheological properties in melt using comb structures with crystalline grafts. Prog Org Coat 49 (2004) 13-22
268. Dzunuzovic E., Tasic S., Bozic B., Babic D., and Dunjic B. Dynamical mechanical analysis of photocrosslinked hyperbranched urethane acrylates. J Serb Chem Soc 69 (2004) 441-453
269. Dunjic B., Tasic S., and Bozic B. Hyperbranched urethane-acrylates. Eur Coat J 6 (2004) 36-41
270. Dzunuzovic E., Tasic S., Bozic B., Babic D., and Dunjic B. UV-curable hyperbranched urethane acrylate oligomers containing soybean fatty acids. Prog Org Coat 52 (2005) 136-143
271. Manczyk K., and Szewczyk P. Highly branched high solids alkyd resins. Prog Org Coat 44 (2002) 99-109
272. Hult A., Johansson M., and Malmstroem E. Dendritic resins for coating applications. Macromol Symp 98 (1995) 1159-1161
273. Xu G., and Shi W. Synthesis and characterization of hyperbranched polyurethane acrylates used as UV curable oligomers for coatings. Prog Org Coat 52 (2005) 110-117
274. Shi W., and Ranby B. Photopolymerization of dendritic methacrylated polyesters. I. Synthesis and properties. J Appl Polym Sci 59 (1996) 1937-1944
275. Tasic S., Bozic B., and Dunjic B. Synthesis of new hyperbranched urethane-acrylates and their evaluation in UV-curable coatings. Prog Org Coat 51 (2004) 320-327
276. Wei H., Kou H., Shi W., Nie K., and Shen X. Thermal and mechanical properties of UV-cured acrylated hyperbranched polyester and its blends with linear polyurethane acrylate. J Coat Technol 75 939 (2003) 37-40
277. Asif A., Huang C., and Shi W. UV curing behaviors and hydrophilic characteristics of UV curable waterborne hyperbranched aliphatic polyesters. Polym Adv Technol 14 (2003) 609-615
278. Asif A., and Shi W. Synthesis and properties of UV curable waterborne hyperbranched aliphatic polyester. Euro Polym J 39 (2003) 933-938
279. Asif A., Huang C., and Shi W. Structure-property study of waterborne, polyurethane acrylate dispersions based on hyperbranched aliphatic polyester for UV-curable coatings. Colloid Polym Sci 283 (2004) 200-208
280. Latella B.A., Ignat M., Barbe C.J., Cassidy D.J., and Bartlett J.R. Adhesion behaviour of organically-modified silicate coatings on stainless steel. J Sol-Gel Sci Technol 26 (2003) 765-770
281. Mackenzie J.D., and Bescher E. Some factors governing the coating of organic polymers by sol-gel derived hybrid materials. J Sol-Gel Sci Technol 27 (2003) 7-14
282. Schubert U. Polymers reinforced by covalently bonded inorganic clusters. Chem Mater 13 (2001) 3487-3494
283. Wilkes G.L., Orler B., and Huang H.H. Ceramers: hybrid materials incorporating polymeric/oligomeric species into inorganic glasses utilizing a sol-gel approach. Am Chem Soc, Polym Prepr 26 (1985) 300-302
284. Schmidt H. New type of non-crystalline solids between inorganic and organic materials. J Non-Cryst Solids 73 (1984) 681-691
285. Wen J., and Wilkes G.L. Organic/inorganic hybrid network materials by the sol-gel approach. Chem Mater 8 (1996) 1667-1681
286. Schubert U., Huesing N., and Lorenz A. Hybrid inorganic-organic materials by sol-gel processing of organofunctional metal alkoxides. Chem Mater 7 (1995) 2010-2027
287. Judeinstein P., and Sanchez C. Hybrid organic-inorganic materials: a land of multidisciplinarity. J Mater Chem 6 (1996) 511-526
288. Schottner G. Hybrid sol-gel-derived polymers: applications of multifunctional materials. Chem Mater 13 (2001) 3422-3435
289. Ribot F., Toledano P., and Sanchez C. Hydrolysis-condensation process of beta.-diketonates-modified cerium (IV) isopropoxide. Chem Mater 3 (1991) 759-764
290. Zhu Y., and Sun D.X. Preparation of silicon dioxide/polyurethane nanocomposites by a sol-gel process. J Appl Polym Sci 92 (2004) 2013-2016
291. Parashar G., Srivastava D., and Kumar P. Ethyl silicate binders for high performance coatings. Prog Org Coat 42 (2001) 1-14
292. Cushing B.L., Kolesnichenko V.L., and O'Connor C.J. Recent advances in the liquid-phase syntheses of inorganic nanoparticles. Chem Rev 104 (2004) 3893-3946
293. Tjong S.C., and Chen H. Nanocrystalline materials and coatings. Mater Sci Eng: R: Reports 45 (2004) 1-88
294. Goda H., and Frank C.W. Fluorescence studies of the hybrid composite of segmented-polyurethane and silica. Chem Mater 13 (2001) 2783-2787
295. Lichtenhan J.D., Vu H.Q., Carter J.A., Gilman J.W., and Ferer F.J. Silsesquioxane-siloxane copolymers from polyhedral silsesquioxanes. Macromolecules 26 (1993) 2141-2142
296. Matejka L., Dukh O., Brus J., Simonsick W.J., and Meissner B. Cage-like structure formation during sol-gel polymerization of glycidyloxypropyltrimethoxysilane. J Non-Cryst Solids 270 (2000) 34-47
297. Daniels M.W., and Francis L.F. Silane adsorption behavior, microstructure, and properties of glycidoxypropyltrimethoxysilane-modified colloidal silica coatings. J Colloid Interf Sci 205 (1998) 191-200
298. Daniels M.W., and Francis L.F. Effect of curing strategies on porosity in silane-modified silica colloidal coatings. Mater Res Soc Symp-Proc 576 (1999) 313-317
299. Atanacio A.J., Latella B.A., Barbe C.J., and Swain M.V. Mechanical properties and adhesion characteristics of hybrid sol-gel thin films. Surf Coat Technol 192 (2005) 354-364
300. Daniels M.W., Sefcik J., Francis L.F., and Cormick A.V.M. Reactions of a trifunctional silane coupling agent in the presence of colloidal silica sols in polar media. J Colloid Interf Sci 219 (1999) 351-356
301. Chu L., Daniels M.W., and Francis L.F. Glycidoxypropyltrimethoxysilane modified colloidal silica coatings. Mater Res Soc Symp-Proc 435 (1996) 221-225
302. Spirkova M., Brus J., Hlavata D., Kamisova H., Matejka L., and Strachota A. Preparation and characterization of hybrid organic-inorganic epoxide-based films and coatings prepared by the sol-gel process. J Appl Polym Sci 92 (2004) 937-950
303. Li C., and Wilkes G.L. Silicone/amine resin hybrid materials as abrasion resistant coatings. Chem Mater 13 (2001) 3663-3668
304. Etienne P., Phalippou J., and Sempere R. Mechanical properties of nanocomposite organosilicate films. J Mater Sci 33 (1998) 3999-4005
305. Oubaha M., Smaihi M., Etienne P., Coudray P., and Moreau Y. Spectroscopic characterization of intrinsic losses in an organic-inorganic hybrid waveguide synthesized by the sol-gel process. J Non-Cryst Solids 318 (2003) 305-313
306. Sanchez C., Lebeau B., Ribot F., and In M. Molecular design of sol-gel derived hybrid organic-inorganic nanocomposites. J Sol-Gel Sci Technol 19 (2000) 31-38
307. Matejka L., Dukh O., and Kolarik J. Reinforcement of crosslinked rubbery epoxies by in-situ formed silica. Polymer 41 (2000) 1449-1459
308. Takahashi R., and Terauchi A. Phase structure and mechanical and adhesion properties of epoxy/silica hybrids. Polymer 42 (2001) 5151-5158
309. Wen J., Vasudevan V.J., and Wilkes G.L. Abrasion resistance inorganic/organic coating materials prepared by the sol-gel method. J Sol-Gel Sci Technol 5 (1995) 115-126
310. 2 thin films by a sol-gel method. J Mater Sci 29 (1994) 5773-5778
311. Crivello J.V., Song K.Y., and Goshal R. Synthesis and photoinitiated cationic polymerization of organic-inorganic hybrid resins. Chem Mater 13 (2001) 1932-1942
312. Caruso F., Susha A.S., Giersig M., and Mohwald H. Magnetic core-shell particles: preparation of magnetite multilayers on polymer latex microspheres. Adv Mater 11 (1999) 950-952
313. Hofacker S., Mechtel M., Mager M., and Kraus H. Sol-gel: a new tool for coatings chemistry. Prog Org Coat 45 (2002) 159-164
314. Kan C., Yuan Q., Wang M., and Kong X. Synthesis of silicone-acrylate copolymer latexes and their film properties. Polym Adv Technol 7 (1996) 95-97
315. Du Y.J., Damron M., Tang G., Zheng H., Chu C.J., and Osborne J.H. Inorganic/organic hybrid coatings for aircraft aluminum alloy substrates. Prog Org Coat 41 (2001) 226-232
316. Bourgeat-Lami E., Espiard P., Guyot A., Gauthier C., David L., and Vigier G. Emulsion polymerization in the presence of colloidal silica particles. Application to the reinforcement of poly(ethyl acrylate) films. Die Angew Makromol Chem 242 (1996) 105-122
317. Chujo Y., and Saegusa T. Organic polymer hybrids with silica gel formed by means of the sol-gel method. Adv Polym Sci 100 (1992) 11-29
318. Rekondo A., Fernandez-Berridi M.J., and Irusta L. Synthesis of silanized polyether urethane hybrid systems. Study of the curing process through hydrogen bonding interactions. Europ Polym J 42 (2006) 2069-2080
319. ®s). Curr Opin Solid State Mater Sci 4 (1999) 571-580
320. Haas K.H., Amberg-Schwab S., and Rose K. Functionalized coating materials based on inorganic-organic polymers. Thin Solid Films 351 (1999) 198-203
321. Matejka L., Dusek K., Plestil J., Kriz J., and Lednicky F. Formation and structure of the epoxy-silica hybrids. Polymer 40 (1999) 171-181
322. Biasci L., Aglietto M., Ruggeri G., and Ciardelli F. Functionalization of montmorillonite by methyl methacrylate polymers containing side-chain ammonium cations. Polymer 35 (1994) 3295-3304
323. Viala Ph., Bourgeat-Lami E., Guyot A., Legrand P., and Lefebvre D. Pigment encapsulation by emulsion polymerisation, redespersible in water. Macromol Symp 187 (2002) 651-661
324. Corcos F., Bourgeat-Lami E., Novat C., and Lang J. Poly(styrene-b-ethylene oxide) copolymers as stabilizers for the synthesis of silica-polystyrene core-shell particles. Colloid Polym Sci 277 (1999) 1142-1151
325. Wizel S., Margel S., and Gedanken A. The preparation of a polystyrene-iron composite by using ultrasound radiation. Polym Int 49 (2000) 445-448
326. 2. Chem Mater 7 (1995) 1991-1994
327. Dirix Y., Bastiaansen C., Caseri W., and Smith P. Oriented pearl-necklace arrays of metallic nanoparticles in polymers: A new route toward polarization-dependent color filters. Adv Mater 11 (1999) 223-227
328. Matejka L., and Dukh O. Organic-inorganic hybrid networks. Macromol Symp 171 (2001) 181-188
329. Gomez-Romero P. Hybrid organic-inorganic materials-in search of synergic activity. Adv Mater 13 (2001) 163-174
330. Zhang T., Xi K., Chen H., and Yu X. Synthesis and properties of self-crosslinkable polyurethane-urea with silsesquioxane formation. J Appl Polym Sci 91 (2004) 190-195
331. Ni H., Simonsick Jr. W.J., Skaja A.D., Williams J.P., and Soucek M.D. Polyurea/polysiloxane ceramer coatings. Prog Org Coat 38 (2000) 97-110
332. Novak B.M. Hybrid nanocomposite materials-between inorganic glasses and organic polymers. Adv Mater 5 (1993) 422-433
333. Wei Y., Bakthavatehalam R., and Whitecar C.K. Synthesis of new organic-inorganic hybrid glasses. Chem Mater 2 (1990) 337-339
334. Wojcik A.B., and Klein L.C. Transparent inorganic/organic copolymers by the sol-gel process: copolymers of tetraethyl orthosilicate (TEOS), vinyl triethoxysilane (VTES) and (meth)acrylate monomers. J Sol-Gel Sci Technol 4 (1995) 57-66
335. Yu Y.Y., Chen C.Y., and Chen W.C. Synthesis and characterization of organic-inorganic hybrid thin films from poly(acrylic) and monodispersed colloidal silica. Polymer 44 (2003) 593-601
336. Liu Y.L., Hsu C.Y., Wang M.L., and Chen H.S. A novel approach of chemical functionalization on nano-scaled silica particles. Nanotechnology 14 (2003) 813-819
337. Liu Y.L., Hsu C.Y., and Hsu K.Y. Poly(methylmethacrylate)-silica nanocomposites films from surface-functionalized silica nanoparticles. Polymer 46 (2005) 1851-1856
338. Garrett TM, Gruzins I. Modified polyurethane including silica and method of manufacture thereof. US patent 5484832, 1996.
339. Chen S., Sui J., and Chen L. Positional assembly of hybrid polyurethane nanocomposites via incorporation of inorganic building blocks into organic polymer. Colloid Polym Sci 283 (2004) 66-73
340. Matejka L., Dukh O., Hlavata D., Meissner B., and Brus J. Cyclization and self-organization in polymerization of trialkoxysilanes. Macromolecules 34 (2001) 6904-6914
341. Sellinger A., and Laine R.M. Silsesquioxanes as synthetic platforms. 3. Photocurable, liquid epoxides as inorganic/organic hybrid precursors. Chem Mater 8 (1996) 1592-1593
342. Sanchez C., Soler-Illia G.J.D.A.A., Ribot F., Lalot T., Mayer C.R., and Cabuil V. Designed hybrid organic-inorganic nanocomposites from functional nanobuilding blocks. Chem Mater 13 (2001) 3061-3083
343. Waddon A.J., and Coughlin E.B. Crystal structure of polyhedral oligomeric silsequioxane (POSS) nano-materials: a study by X-ray diffraction and electron microscopy. Chem Mater 15 (2003) 4555-4561
344. Neumann D., Fisher M., Tran L., and Matisons J.G. Synthesis and characterization of an isocyanate functionalized polyhedral oligosilsesquioxane and the subsequent formation of an organic-inorganic hybrid polyurethane. J Am Chem Soc 124 (2002) 13998-13999
345. Fu B.X., Hsiao B.S., White H., Rafailovich M., Mather P.T., Jeon H.G., et al. Nanoscale reinforcement of polyhedral oligomeric silsesquioxane (POSS) in polyurethane elastomers. Polym Int 49 (2000) 437-440
346. Baney R.H., Itoh M., Sakakibara A., and Suzuki T. Silsesquioxanes. Chem Rev 95 (1995) 1409-1430
347. Lichtenhan J.D. Polyhedral oligomeric silsesquioxanes: building blocks for silsesquioxane-based polymers and hybrid materials. Comments Inorg Chem 17 (1995) 115-130
348. Lichtenhan J.D., Otonari Y.A., and Cam M.J. Linear hybrid polymer building blocks: methacrylate-functionalized polyhedral oligomeric silsesquioxane monomers and polymers. Macromolecules 28 (1995) 8435-8437
349. Kim K.M., and Chujo Y. Liquid-crystalline organic-inorganic hybrid polymers with functionalized silsesquioxanes. J Polym Sci Part A: Polym Chem 39 (2001) 4035-4043
350. Lee A., Xiao J., and Feher F.J. New approach in the synthesis of hybrid polymers grafted with polyhedral oligomeric silsesquioxane and their physical and viscoelastic properties. Macromolecules 38 (2005) 438-444
351. Fu B.X., Hsiao B.S., Pagola S., Stephens P., White H., Rafailovich M., et al. Structural development during deformation of polyurethane containing polyhedral oligomeric silsesquioxanes (POSS) molecules. Polymer 42 (2001) 599-611
352. Fu B.X., Zhang W., Hsiao B.S., Johanson G., Sauer B.B., Phillips S., et al. Synthesis and characterization of novel segmented polyurethanes containing polyhedral oligomeric silsesquioxanes (POSS) nanostructural molecules. Am Chem Soc, Polym Preprints 41 (2000) 587-588
353. Schwab J.J., Lichtenhan J.D., Chaffee K.P., Mather P.T., and Romo-Uribe A. Polyhedral oligomeric silsesquioxanes (POSS): silicon based monomers and their use in the preparation of hybrid polyurethanes. Mater Res Soc Symp-Proc 519 (1998) 21-27
354. Devaus E., Rochery M., and Bourbigot S. Polyurethane/clay and polyurethane/POSS nanocomposites as flame retarded coating for polyester and cotton fabrics. Fire Mater 26 (2002) 149-154
355. Liu H., and Zheng S. Polyurethane networks nanoreinforced by polyhedral oligomeric silsesquioxane. Macromol Rapid Commun 26 (2005) 196-200
356. Shea K.J., and Loy D.A. Bridged polysilsesquioxanes. Molecular-engineered hybrid organic-inorganic materials. Chem Mater 13 (2001) 3306-3319
357. Honma I., Nakajima H., Nishikawa O., Sugimoto T., and Nomura S. Organic/inorganic nano-composites for high temperature proton conducting polymer electrolytes. Solid State Ion 162-163 (2003) 237-245
358. Varma A.J., Deshpande M.D., and Nadkarni V.M. Morphology and mechanical properties of silicate filled polyurethane elastomers based on castor oil and polymeric MDI. Die Angew Makromol Chem 132 (1985) 203-209
359. Gleiter H. Nanocrystalline materials. Prog Mater Sci 33 (1989) 223-315
360. Baer D.R., Burrows P.E., and El-Azab A.A. Enhancing coating functionality using nanoscience and nanotechnology. Prog Org Coat 47 (2003) 342-356
361. Musil J. Hard and superhard nanocomposite coatings. Surf Coat Technol 125 (2000) 322-330
362. Holubar P., Jilek M., and Sima M. Present and possible future applications of superhard nanocomposite coatings. Surf Coat Technol 133-134 (2000) 145-151
363. Vaz F., and Rebouta L. Superhard nanocomposite Ti-Si-N coating. Mater Sci Forum 383 (2002) 143-149
364. Andrievski R.A. Films as nanostructured materials with characteristic mechanical properties. Mater Trans 42 (2001) 1471-1473
365. Landry C.J.T., Coltrain B.K., Landry M.R., Fitzgerald J.J., and Long V.K. Poly(vinyl acetate)/silica-filled materials: material properties of in situ vs fumed silica particles. Macromolecules 26 (1993) 3702-3712
366. Hajji P., David L., Gerard J.F., Pascault J.P., and Vigier G. Synthesis, structure, and morphology of polymer-silica hybrid nanocomposites based on hydroxyethyl methacrylate. J Polym Sci: Part B 37 (1999) 3172-3187
367. Ou Y., Yang F., and Yu Z.Z. A new conception on the toughness of nylon 6/silica nanocomposite prepared via in situ polymerization. J Polym Sci: Part B 36 (1998) 789-795
368. Reynaud E., Jouen T., Gauthier C., Vigier G., and Varlet J. Nanofillers in polymeric matrix: a study on silica reinforced PA6. Polymer 42 (2001) 8759-8768
369. 2 nanocomposites. Polymer 41 (2000) 2813-2825
370. Kashiwagi T., Gilman J.W., Butler K.M., Harris R.H., Shields J.R., and Asano A. Flame retardant mechanism of silica gel/silica. Fire Mater 24 (2000) 277-289
371. Kashiwagi T., Shields J.R., Harris Jr. R.H., and Davis R.D. Flame-retardant mechanism of silica: effects of resin molecular weight. J Appl Polym Sci 87 (2003) 1541-1553
372. Kashiwagi T., Morgan A.B., Antonucci J.M., VanLandingham M.R., Harris Jr. R.H., Awad W.H., et al. Thermal and flammability properties of a silica-poly(methylmethacrylate) nanocomposite. J Appl Polym Sci 89 (2003) 2072-2078
373. Koch C.C. Synthesis of nanostructured materials by mechanical milling: problems and opportunities. Nanostruct Mater 9 (1997) 13-22
374. Giannelis E.P. Polymer layered silicate nanocomposites. Adv Mater 8 (1996) 29-35
375. Osman M.A., Mittal V., Morbidelli M., and Suter U.W. Polyurethane adhesive nanocomposites as gas permeation barrier. Macromolecules 36 (2003) 9851-9858
376. Osman M.A., Ploetze M., and Suter U.W. Surface treatment of clay minerals-thermal stability, basal-plane spacing and surface coverage. J Mater Chem 13 (2003) 2359-2366
377. Tien Y.I., and Wei K.H. Hydrogen bonding and mechanical properties in segmented montmorillonite/polyurethane nanocomposites of different hard segment ratios. Polymer 42 (2001) 3213-3221
378. Theng BKG. The chemistry of clay-organic reactions. London: Adam Hilger; New York:Wiley; 1974.
379. Zilg C., Thomann R., Mulhaupt R., and Finter J. Polyurethane nanocomposites containing laminated anisotropic nanoparticles derived from organophilic layered silicates. Adv Mater 11 1 (1999) 49-52
380. Ma J., Zhang S., and Qi Z. Synthesis and characterization of elastomeric polyurethane/clay nanocomposites. J Appl Polym Sci 82 (2001) 1444-1448
381. Burgentzlé D., Duchet J., Gérard J.F., Jupin A., and Fillon B. Solvent-based nanocomposite coatings: I. Dispersion of organophilic montmorillonite in organic solvents. J Colloid Inter Sci 278 (2004) 26-39
382. Kojima Y., Usuki A., Kawasumi M., Okada A., Fukushima Y., Kurauchi T., et al. Mechanical properties of nylon 6-clay hybrid. J Mater Res 8 (1993) 1185-1189
383. Wang Z., and Pinnavia T.J. Nanolayer reinforcement of elastomeric polyurethane. Chem Mater 10 (1998) 3769-3771
384. Solarski S., Benali S., Rochery M., Devaux E., Alexandre M., Monteverde F., et al. Synthesis of a polyurethane/clay nanocomposite used as coating: Interactions between the counterions of clay and the isocyanate and incidence on the nanocomposite structure. J Appl Polym Sci 95 (2005) 238-244
385. Gilman J.W. Flammability and thermal stability studies of polymer layered-silicate (clay) nanocomposites. Appl Clay Sci 15 (1999) 31-49
386. Zhu J., Morgan A.B., Lamelas J., and Wilkie C.A. Fire properties of polystyrene-clay nanocomposites. Chem Mater 13 (2001) 3774-3780
387. Zanetti M., Camino G., and Mulhaupt R. Combustion behaviour of EVA/fluorohectorite nanocomposites. Polym Degrad Stabil 74 (2001) 413-417
388. Kawasumi M., Hasegawa N., Kato M., Usuki A., and Okada A. Preparation and mechanical properties of polypropylene-clay hybrids. Macromolecules 30 (1997) 6333-6338
389. Wang Z., and Pinnavaia T.J. Hybrid organic-inorganic nanocomposites: exfoliation of magadiite nanolayers in an elastomeric epoxy polymer. Chem Mater 10 (1998) 1820-1826
390. Manias E., Touny A., Wu L., Strawhecker K., Lu B., and Chung T.C. Polypropylene/montmorillonite nanocomposites. Review of the synthetic routes and materials properties. Chem Mater 13 (2001) 3516-3523
391. Alexandre M., and Dubois P. Polymer-layered silicate nanocomposites: preparation, properties and uses of a new class of materials. Mater Sci Eng R: Rep 28 (2000) 1-63
392. Chen T.K., Tien Y.I., and Wie K.H. Synthesis and characterization of novel segmented polyurethane/clay nanocomposites. Polymer 41 (2000) 1345-1353
393. Yao K.J., Song M., Hourston D.J., and Luo D.Z. Polymer/layered clay nanocomposites: 2 polyurethane nanocomposites. Polymer 43 (2002) 1017-1020
394. Yeh J.M., Liou S.J., Lai M.C., Chang Y.W., Huang C.Y., Chen C.P., et al. Comparative studies of the properties of poly(methyl methacrylate)-clay nanocomposite materials prepared by in situ emulsion polymerization and solution dispersion. J Appl Polym Sci 94 (2004) 1936-1946
395. Takeichi T., and Guo Y. Synthesis and characterization of poly(urethane-benzoxazine)/clay hybrid nanocomposites. J Appl Polym Sci 90 (2003) 4075-4083
396. Lan T., and Pinnavaia T.J. Clay-reinforced epoxy nanocomposites. Chem Mater 6 (1994) 2216-2219
397. Lan T., Kaviratna P.D., and Pinnavaia T.J. Mechanism of clay tactoid exfoliation in epoxy-clay nanocomposites. Chem Mater 7 (1995) 2144-2150
398. Chen T.K., Tien Y.I., and Wei K.H. Synthesis and characterization of novel segmented polyurethane/clay nanocomposite via poly(ε-caprolactone)/clay. J Polym Sci A: Polym Chem 37 (1999) 2225-2233
399. Tien Y.I., and Wei K.H. High-tensile-property layered silicates/polyurethane nanocomposites by using reactive silicates as pseudo chain extenders. Macromolecules 34 (2001) 9045-9052
400. Tien Y.I., and Wei K.H. The effect of nano-sized silicate layers from montmorillonite on glass transition, dynamic mechanical and thermal degradation properties of segmented polyurethane. J Appl Polym Sci 86 (2002) 1741-1748
401. Duquesne S., Bras M.L., Bourbigot S., Delobel R., Vezin H., Camino G., et al. Expandable graphite: a fire retardant additive for polyurethane coatings. Fire Mater 27 (2003) 103-117
402. Lee DH, Hyun DH, Cho HS, Kim SB. Nonhalogenated flame retardant for polyurethane using melamine cyanurate, and its preparation method. Korean patent 2005104873, 2005.
403. Lu S.Y., and Hamerton I. Recent developments in the chemistry of halogen-free flame retardant polymers. Prog Polym Sci 27 (2002) 1661-1712
404. Hsiue G.H., Shiao S.J., Wei H.F., Kuo W.J., and Sha Y.A. Novel phosphorus-containing dicyclopentadiene-modified phenolic resins for flame-retardancy applications. J Appl Polym Sci 79 (2001) 342-349
405. Price D., Pyrah K., Hull T.R., Milnes G.J., Wooley W.D., Ebdon J.R., et al. Ignition temperatures and pyrolysis of a flame-retardant methyl methacrylate copolymer containing diethyl(methacryloyloxymethyl)- phosphonate units. Polym Int 49 (2000) 1164-1168
406. Bertelli G., Camino G., Marchetti E., Costa L., Casorati E., and Locatelli R. Parameters affecting fire retardant effectiveness in intumescent systems. Polym Degrad Stabil 25 (1989) 277-292
407. Sivriev C., Zabski L., and Borissov G. Rigid polyurethane foams with reduced flammability based on new phosphorus-and nitrogen-containing diols. Eur Polym J 28 (1992) 9-13
408. Park HS, Chung DJ, Lee AR, You HJ. Modified polyester pre-polymer containing triphosphorus and preparation thereof, and two-part flame resistant polyurethane coating comprising the same. Korean patent 078527, 2005.
409. Ma Z.L., Zhao W.G., Liu Y.F., and Shi J.R. Intumescent polyurethane coatings with reduced flammability based on spirocyclic phosphate-containing polyols. J Appl Polym Sci 66 (1997) 471-475
410. Wang C.S., and Shieh J.Y. Phosphorus-containing epoxy resin for an electronic application. J Appl Polym Sci 73 (1999) 353-361
411. Wang C.S., and Lin C.H. Properties and curing kinetic of diglycidyl ether of bisphenol A cured with a phosphorus-containing diamine. J Appl Polym Sci 74 (1999) 1635-1645
412. Wang C.S., and Lin C.H. Synthesis and properties of phosphorus containing advanced epoxy resins. J Appl Polym Sci 75 (2000) 429-436
413. Wang C.S., and Lin C.H. Synthesis and properties of phosphorus-containing epoxy resins by novel method. J Polym Sci A: Polym Chem 37 (1999) 3903-3909
414. Lin C.H., Wu C.Y., and Wang C.S. Synthesis and properties of phosphorus-containing advanced epoxy resins. II. J Appl Polym Sci 78 (2000) 228-235
415. Chang S.J., and Chang F.C. Synthesis and characterization of copolyesters containing the phosphorus linking pendent groups. J Appl Polym Sci 72 (1999) 109-122
416. Wang C.S., and Shieh J.Y. Synthesis and properties of epoxy resins containing bis(3-hydroxyphenyl) phenyl phosphate. Euro Polym J 36 (2000) 443-452
417. Kuo P.L., Chang J.M., and Wang T.L. Flame-retarding materials-I. Syntheses and flame-retarding property of alkylphosphate-type polyols and corresponding polyurethanes. J Appl Polym Sci 69 (1998) 1635-1643
418. Chang T.C., Chiu Y.S., Chen H.B., and Ho S.Y. Degradation of phosphorus-containing polyurethanes. Polym Degrad Stab 47 (1995) 375-381
419. Park H.S., Kwon S.Y., Seo K.J., Im W.B., Wu J.P., and Kim S.K. Preparation and physical properties of polyurethane flame retardant coatings using phosphorus-containing lactone modified polyesters. J Coat Technol 71 899 (1999) 59-65
420. Park H.S., Kim D.W., Hwang K.H., Yoon B.S., Wu J.P., Park J.W., et al. Preparation and characterization of polyurethane flame-retardant coatings using pyrophosphoric lactone-modified polyesters/isophorone diisocyanate-isocyanurate. J Appl Polym Sci 80 (2001) 2316-2327
421. Mequanint K., Sanderson R., and Pasch H. Thermogravimetric study of phosphated polyurethane ionomers. Polym Degrad Stab 77 (2002) 121-128
422. Zhu S.W., and Shi W.F. Synthesis and photopolymerization of hyperbranched polyurethane acrylates applied to UV curable flame retardant coatings. Polym Int 51 (2002) 223-227
423. Zhu S.W., and Shi W.F. Flame retardant mechanism of hyperbranched polyurethane acrylates used for UV curable flame retardant coatings. Polym Degrad Stab 75 (2002) 543-547
424. Zhu S., and Shi W. Synthesis, characterization and flame retardancy of methacrylated phosphate/diphosphate. Polym Int 53 (2004) 266-271
425. Wang T.L., Cho Y.L., and Kuo P.L. Flame-retarding materials. II. Synthesis and flame-retarding properties of phosphorus-on-pendent and phosphorus-on-skeleton polyols and the corresponding polyurethanes. J Appl Polym Sci 82 (2001) 343-357
426. Shao C.H., Huang J.J., Chen G.N., Yeh J.T., and Chen K.N. Thermal and combustion behaviors of aqueous-based polyurethane system with phosphorus and nitrogen containing curing agent. Polym Degrad Stab 65 (1999) 359-371
427. Wang T.Z., and Chen K.N. Introduction of covalently bonded phosphorus into aqueous-based polyurethane system via postcuring reaction. J Appl Polym Sci 74 (1999) 2499-2509
428. Huang W.K., Yeh J.T., Chen K.J., and Chen K.N. Flame retardation improvement of aqueous-based polyurethane with aziridinyl phosphazene curing system. J Appl Polym Sci 79 (2001) 662-673
429. Allcock H.R. The synthesis of functional polyphosphazenes and their surfaces. Appl Organomet Chem 12 (1998) 659-666
430. Allcock H.R. Inorganic-organic polymers. Adv Mater 6 (1994) 106-115
431. De Jaeger R., and Gleria M. Poly(organophosphazene)s and related compounds: synthesis, properties and applications. Prog Polym Sci 23 (1998) 179-276
432. Chiu W.Y., Wang P.S., and Don T.M. Synthesis and properties of polyurethanes blended with poly(bispropoxyphosphazene). Polym Degrad Stab 66 (1999) 233-239
433. Mathew D., Nair C.P.R., and Ninan K.N. Phosphazene-triazine cyclomatrix network polymers: some aspects of synthesis, thermal- and flame-retardant characteristics. Polym Int 49 (2000) 48-56
434. Stewart F.F., and Harrup M.K. Phosphazene monomers from the regiospecific reaction of tert-butylhydroquinone with hexachlorocyclotriphosphazene: a new composite material precursor. J Appl Polym Sci 72 (1999) 1085-1090
435. Chen-Yang Y.W., Chuang J.R., Yang Y.C., Li C.Y., and Chiu Y.S. New UV-curable cyclotriphosphazenes as fire-retardant coating materials for wood. J Appl Polym Sci 69 (1998) 115-122
436. Huang W.K., Chen K.J., Yeh J.T., and Chen K.N. Curing and combustion properties of a PU-coating system with UV-reactive phosphazene. J Appl Polym Sci 85 (2002) 1980-1991
437. Gleria M., and De Jaeger R. Aspects of phosphazene research. J Inorg Organomet Polym 111 (2001) 1-45
438. Armitage P., Ebdon J.R., Hunt B.J., Jones M.S., and Thorpe F.G. Chemical modification of polymers to improve flame retardance-I. The influence of boron-containing groups. Polym Degrad Stabil 54 (1996) 387-393
439. Czuprynski B., and Paciorek J. The effect of tri(2-hydroxypropyl) borate on the properties of rigid polyurethane-polyisocyanurate foams. Polimery 44 (1999) 552-554
440. Myers R.E., Dickens Jr. E.D., Licursi E., and Evans R.E. Ammonium pentaborate: an intumescent flame retardant for thermoplastic polyurethanes. J Fire Sci 3 (1985) 432-449
441. Czuprynski B., Paciorek-Sadowska J., and Liszkowska J. Effect of selected boranes on properties of rigid polyurethane-polyisocyanurate foams. J Polym Eng 22 (2002) 59-74
442. Czuprynski B., Paciorek-Sadowska J., and Liszkowska J. The effect of tri(1-chloro-3-etoxy-propane-2-ol) borate on the properties of rigid polyurethane-polyisocyanurate foams. Polimery 47 (2002) 727-729
443. Kaszynski P. "Four decades of organic chemistry of closo-boranes: a synthetic toolbox for constructing liquid crystal materials. A review. Collect Czech Chem Commun 64 (1999) 895-926
444. Cheung M.S., Chan H.S., and Xie Z. Synthesis and structural characterization of hydroxyethyl- and alkoxyethyl-o-carboranes and their alkali and rare earth metal complexes. Organometallics 23 (2004) 517-526
445. Ohta K., Goto T., and Endo Y. New synthetic method of 1,2-diaryl-1,2-dicarba-closo-dodecaboranes employing aromatic nucleophilic substitution (SNAr) reaction. Tetrahedr Lett 46 (2005) 483-485
446. Fox M.A., and Wade K. Model compounds and monomers for phenylene ether carboranylene ketone (PECK) polymer synthesis: preparation and characterization of boron-arylated ortho-carboranes bearing carboxyphenyl, phenoxyphenyl or benzoylphenyl substituents. J Mater Chem 12 (2002) 1301-1306
447. Packirisamy S. Decaborane (14)-based polymers. Prog Polym Sci 21 (1996) 707-773
448. Delman A.D., Kelly J.J., and Simms B.B. Thermal stability of structurally related polymers containing carborane and phthalocyanine groups. J Polym Sci: Part A-1: Polym Chem 8 (1970) 111-123
449. Parrott M.C., Marchington E.B., Valliant J.F., and Adronov A. Preparation of synthons for carborane containing macromolecules. Macromol Symp 196 (2003) 201-211
450. Munekata S. Fluoropolymers as coating material. Prog Org Coat 16 (1994) 113-134
451. Sung L.P., Vicini S., Ho D.L., Hedhli L., Olmstead C., and Wood K.A. Effect of microstructure of fluorinated acrylic coatings on UV degradation testing. Polymer 45 (2004) 6639-6646
452. Locaspi A. Easy-cleaning fluorocoatings for GFRC and architectural. In: Proceedings of the III conference on fluorine in coatings, Orlando, FL, January 1999
453. Deflorian F., Fedrizzi L., Locaspi A., and Bonora P.L. Testing of corrosion resistant fluoropolymer coatings. Electrochimica Acta 38 14 (1993) 1945-1950
454. Temtchenko T, Marchetti R, Maccone P, Radice S, Perfluo-ropolyetherbased coil coatings. In: Proceedings of the II conferenceon fluorine in coatings, Munich, Germany, 24-26 February 1997.
455. Temtchenko T., Marchetti R., and Locaspi A. Self-cleaning perfluoropolyether based coatings. Surf Coat Int 81 9 (1998) 448-451
456. Locaspi A, Marchetti R, Temtchenko T, Sanguineti A. Novelfluorinated high performance antigraffiti coatings for transparentplastics. In: Proceedings of the 17th international conference on coatings, inks and adhesives for plastics and elastomers, Milan, Italy, 27-28 October 1997.
457. Kirchner JR, Bennett Jr WW. Coatings containing fluorinated esters. US patent 5670573, 1997.
458. Moncur MV, Hoo LH, Houghton EJ. Transparent fluorinated polyurethane coating compositions and methods of use thereof. US patent 6001923, 1999.
459. Lehmler H.J., and Bummer P.M. Mixing of partially fluorinated carboxylic acids with their hydrocarbon analogs at the air-water interface. J Colloid Interf Sci 249 (2002) 381-387
460. Scicchitano M., and Turri S. Cyclic acetals of fluorinated polyether macrodiols. J Fluorine Chem 95 (1999) 97-103
461. Hung M.H., Farnham W.B., Feiring A.E., and Rozen S. Functional fluoromonomers and fluoropolymers. In: Hougham G., Cassidy P.E., Johns K., and Davidson T. (Eds). Fluoropolymers: synthesis vol. 1 (1999), Plenum Press, New York 51-66
462. Iezzi R.A., Gaboury S., and Wood A. Acrylic-fluoropolymer mixtures and their use in coatings. Prog Org Coat 40 (2000) 55-60
463. Iezzi R.A. Fluoropolymer coatings for architectural application, modern fluoropolymer (1997), Wiley, New York p. 271 [Chapter 14]
464. Furukawa M. Property-structure relationships of polyurethane elastomers: improvement of hydrolytic stability and thermal stability. J Appl Polym Sci: Appl Polym Symp 53 (1994) 61-76
465. Tonelli C., Trombetta T., Scicchitano M., and Castiglioni G. New perfluoropolyether soft segment containing polyurethanes. J Appl Polym Sci 57 (1995) 1031-1042
466. Fabbri P., Messori M., Montecchi M., Nannarone S., Pasquali L., Pilati F., et al. Perfluoropolyether-based organic-inorganic hybrid coatings. Polymer 47 (2006) 1055-1062
467. Anton D. Surface-fluorinated coatings. Adv Mater 10 (1998) 1197-1205
468. Yoon S.C., and Ratner B.D. Surface structure of segmented poly(ether urethanes) and poly(ether urethane ureas) with various perfluoro chain extenders. An X-ray photoelectron spectroscopic investigation. Macromolecules 19 (1986) 1068-1079
469. Yoon S.C., and Ratner B.D. Surface and bulk structure of segmented poly(ether urethanes) with perfluoro chain extenders. 2. FTIR, DSC, and X-ray photoelectron spectroscopic studies. Macromolecules 21 (1988) 2392-2400
470. Yoon S.C., and Ratner B.D. Surface and bulk structure of segmented poly(ether urethanes) with perfluoro chain extenders. 3. Effects of annealing, casting solvent, and casting conditions. Macromolecules 21 (1988) 2401-2404
471. Yoon S.C., Sung Y.K., and Ratner B.D. Surface and bulk structure of segmented poly(ether urethanes) with perfluoro chain extenders. 4. Role of hydrogen bonding on thermal transitions. Macromolecules 23 (1990) 4351-4356
472. Yoon S.C., Ratner B.D., Ivan B., and Kennedy J.P. Surface and bulk structure of segmented poly(ether urethanes) with perfluoro chain extenders. 5. Incorporation of poly(dimethylsiloxane) and polyisobutylene macroglycols. Macromolecules 27 (1994) 1548-1554
473. Eberhard K, Beate B, Christian F, Juan GB. Fluorine-containing blocked isocyanates. US patent 6509433, 2003.
474. Ho T., and Wynne K.J. A new fluorinated polyurethane: polymerization, characterization, and mechanical properties. Macromolecules 25 (1992) 3521-3527
475. Honeychuck R.V., Ho T., Wynne K.J., and Nissan R.A. Preparation and characterization of polyurethanes based on a series of fluorinated diols. Chem Mater 5 (1993) 1299-1306
476. Yu X.H., Okkema A.Z., and Cooper S.L. Synthesis and physical properties of poly(fluoroalkylether)urethanes. J Appl Polym Sci 41 (1990) 1777-1795
477. Edelman P.G., Castner D.G., and Ratner B.D. Perfluoropolyether soft segment containing polyurethanes. Synthesis, characterization and surface properties. Am Chem Soc, Polym Prepr 31 (1990) 314-315
478. Pilati F., Toselli M., Re A., Bottino F.A., Pollicino A., and Recca A. Surface investigation by ESCA of poly(ethylene terephthalate)-perfluoro polyether block copolymers. Macromolecules 23 (1990) 348-350
479. Bongiovanni R., Malucelli G., Pollicino A., Tonelli C., Simeone G., and Priola A. Perfluoropolyether structures as surface modifying agents of UV-curable systems. Macromol Chem Phys 199 (1998) 1099-1105
480. Bongiovanni R., Beamson G., Mamo A., Priola A., Recca A., and Tonelli C. High resolution XPS investigation of photocured films containing perfluoropolyether acrylates. Polymer 41 (2000) 409-414
481. Bottino F.A., Di Pasquale G., Pollicino A., Pilati F., Toselli M., and Tonelli C. XPS study on surface segregation in poly(ethylene-iso/terephthalate)-perfluoropolyether block copolymers. Macromolecules 31 (1998) 7814-7819
482. Danusso F., Levi M., Gianotti G., and Turri S. Some physical properties of two homologous series of perfluoro-polyoxyalkylene oligomers. Eur Polym J 30 (1994) 647-651
483. Temtchenko T., Turri S., Novelli S., and Delucchi M. New developments in perfluoropolyether resins technology: high solid and durable polyurethanes for heavy duty and clear OEM coatings. Prog Org Coat 43 (2001) 75-84
484. Turri S., Scicchitano M., Simeone G., and Tonelli C. Chemical approaches toward the definition of new high-solid and high-performance fluorocoatings. Prog Org Coat 32 (1997) 205-213
485. Barbucci A., Delucchi M., Goretta L., and Cerisola G. Electrochemical and physico-chemical characterization of fluorinated organic coatings for steel and concrete protection: influence of the pigment volume concentration. Prog Org Coat 33 (1998) 139-148
486. Delucchi M., Turri S., Barbucci A., Bassi M., Novelli S., and Cerisola G. Fluoropolyether coatings: relationships of electrochemical impedance spectroscopy measurements, barrier properties, and polymer structure. J Polym Sci Part B: Polym Phys 40 (2002) 52-64
487. Delucchi M., Turri S., Barbucci A., Novelli S., and Cerisola G. Investigation on physico-chemical and electrochemical properties of fluoropolyether coatings. Prog Org Coat 44 (2002) 227-232
488. Tonelli C., and Ajroldi G. New fluoro-modified thermoplastic polyurethanes. J Appl Polym Sci 87 (2003) 2279-2294
489. Kim Y.S., Lee J.S., Ji Q., and McGrath J.E. Surface properties of fluorinated oxetane polyol modified polyurethane block copolymers. Polymer 43 (2002) 7161-7170