Effects of Injection Pressure, Injection-Rate Shape, and Heat Release on Liquid Length

SAE International Journal of Engines

Volumn 5, Issue 2, 2012, Pages 415-429

  Fisher, Brian ^a   Mueller, Charles J ^a  

^a SANDIA NATIONAL LABORATORIES   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

COMBUSTION CHAMBERS; DIESEL FUELS; ENGINE CYLINDERS; ENGINES; FUEL PURIFICATION; FUELS; LIQUIDS;

AMBIENT CONDITIONS; COMMON RAIL FUEL SYSTEM; COMMON RAIL INJECTOR; COMPRESSIVE HEATING; CONSTANT VOLUME COMBUSTION CHAMBERS; ELECTRONICALLY CONTROLLED UNIT; INJECTION PRESSURES; THERMODYNAMIC CONDITIONS;

DENSITY OF GASES;

EID: 84879121158     PISSN: 19463936     EISSN: 19463944     Source Type: Journal    
DOI: 10.4271/2012-01-0463     Document Type: Article

References (51)

1. Mueller, C.Martin, G.Briggs, T.Duffy, K., , , and , “An Experimental Investigation of In-Cylinder Processes Under Dual-Injection Conditions in a DI Diesel Engine,” SAE Technical Paper 2004-01-1843, 2004, doi:10.4271/2004-01-1843.
2. Kashdan, J.Mendez, S.Bruneaux, G., , and , “On the Origin of Unburned Hydrocarbon Emissions in a Wall Guided, Low NOx Diesel Combustion System,” SAE Technical Paper 2007-01-1836, 2007, doi:10.4271/2007-01-1836.
3. Opat, R.Ra, Y.Gonzalez, D., M.Krieger, R., , , et al., “Investigation of Mixing and Temperature Effects on HC/CO Emissions for Highly Dilute Low Temperature Combustion in a Light Duty Diesel Engine,” SAE Technical Paper 2007-01-0193, 2007, doi:10.4271/2007-01-0193.
4. Martin, G.Mueller, C.Milam, D.Radovanovic, M., , , et al., “Early Direct-Injection, Low-Temperature Combustion of Diesel Fuel in an Optical Engine Utilizing a 15-Hole, Dual-Row, Narrow-Included-Angle Nozzle,” SAE Int. J. Engines 1(1):1057-1082, 2009, doi:10.4271/2008-01-2400.
5. Takeda, Y.Keiichi, N.Keiichi, N., , and , “Emission Characteristics of Premixed Lean Diesel Combustion with Extremely Early Staged Fuel Injection,” SAE Technical Paper 961163, 1996, doi: 10.4271/961163.
6. Drake, M.Fansler, T.Solomon, A.Szekely, G., , , and , “Piston Fuel Films as a Source of Smoke and Hydrocarbon Emissions from a Wall-Controlled Spark-Ignited Direct-Injection Engine,” SAE Technical Paper 2003-01-0547, 2003, doi:10.4271/2003-01-0547.
7. Hardy, W.Reitz, R. and , “A Study of the Effects of High EGR, High Equivalence Ratio, and Mixing Time on Emissions Levels in a Heavy-Duty Diesel Engine for PCCI Combustion,” SAE Technical Paper 2006-01-0026, 2006, doi:10.4271/2006-01-0026.
8. Fang, H.Alleman, T.McCormick, R., , and , “Quantification of Biodiesel Content in Fuels and Lubricants by FTIR and NMR Spectroscopy,” SAE Technical Paper 2006-01-3301, 2006, doi:10.4271/2006-01-3301.
9. Andreae, M.Fang, H.Bhandary, K., , and , “Biodiesel and Fuel Dilution of Engine Oil,” SAE Technical Paper 2007-01-4036, 2007, doi:10.4271/2007-01-4036.
10. Fang, H.Whitacre, S.Yamaguchi, E.Boons, M., , , and , “Biodiesel Impact on Wear Protection of Engine Oils,” SAE Technical Paper 2007-01-4141, 2007, doi:10.4271/2007-01-4141.
11. Devlin, C.Passut, C.Campbell, R.Jao, T., , , and , “Biodiesel Fuel Effect on Diesel Engine Lubrication,” SAE Technical Paper 2008-01-2375, 2008, doi:10.4271/2008-01-2375.
12. Thornton, M.Alleman, T.Luecke, J.McCormick, R., , , and , “Impacts of Biodiesel Fuel Blends Oil Dilution on Light-Duty Diesel Engine Operation,” SAE Int. J. Fuels Lubr. 2(1):781-788, 2009, doi:10.4271/2009-01-1790.
13. Fang, T.Coverdill, R.Lee, C.White, R., , , and , “Smokeless Combustion within a Small-Bore HSDI Diesel Engine Using a Narrow Angle Injector,” SAE Technical Paper 2007-01-0203, 2007, doi:10.4271/2007-01-0203.
14. Yokota, H.Kudo, Y.Nakajima, H.Kakegawa, T., , , et al., “A New Concept for Low Emission Diesel Combustion,” SAE Technical Paper 970891, 1997, doi: 10.4271/970891.
15. Klingbeil, A.Juneja, H.Ra, Y.Reitz, R., , , and , “Premixed Diesel Combustion Analysis in a Heavy-Duty Diesel Engine,” SAE Technical Paper 2003-01-0341, 2003, doi:10.4271/2003-01-0341.
16. Kanda, T.Hakozaki, T.Uchimoto, T.Hatano, J., , , et al., “PCCI Operation with Early Injection of Conventional Diesel Fuel,” SAE Technical Paper 2005-01-0378, 2005, doi:10.4271/2005-01-0378.
17. Kook, S.Bae, C.Miles, P.Choi, D., , , et al., “The Influence of Charge Dilution and Injection Timing on Low-Temperature Diesel Combustion and Emissions,” SAE Technical Paper 2005-01-3837, 2005, doi:10.4271/2005-01-3837.
18. Lechner, G.Jacobs, T.Chryssakis, C.Assanis, D., , , et al., “Evaluation of a Narrow Spray Cone Angle, Advanced Injection Timing Strategy to Achieve Partially Premixed Compression Ignition Combustion in a Diesel Engine,” SAE Technical Paper 2005-01-0167, 2005, doi:10.4271/2005-01-0167.
19. Minato, A.Tanaka, T.Nishimura, T., , and , “Investigation of Premixed Lean Diesel Combustion with Ultra High Pressure Injection,” SAE Technical Paper 2005-01-0914, 2005, doi:10.4271/2005-01-0914.
20. Musculus, M., “Multiple Simultaneous Optical Diagnostic Imaging of Early-Injection Low-Temperature Combustion in a Heavy-Duty Diesel Engine,” SAE Technical Paper 2006-01-0079, 2006, doi:10.4271/2006-01-0079.
21. Huestis, E.Erickson, P.Musculus, M., , and , “In-Cylinder and Exhaust Soot in Low-Temperature Combustion Using a Wide-Range of EGR in a Heavy-Duty Diesel Engine,” SAE Technical Paper 2007-01-4017, 2007, doi:10.4271/2007-01-4017.
22. Genzale, C.Reitz, R.Musculus, M., , and , “Effects of Piston Bowl Geometry on Mixture Development and Late-Injection Low-Temperature Combustion in a Heavy-Duty Diesel Engine,” SAE Int. J. Engines 1(1):913-937, 2009, doi:10.4271/2008-01-1330.
23. Naber, J.Siebers, D. and , “Effects of Gas Density and Vaporization on Penetration and Dispersion of Diesel Sprays,” SAE Technical Paper 960034, 1996, doi: 10.4271/960034.
24. Siebers, D., “Liquid-Phase Fuel Penetration in Diesel Sprays,” SAE Technical Paper 980809, 1998, doi: 10.4271/980809.
25. Higgins, B.Mueller, C.Siebers, D., , and , “Measurements of Fuel Effects on Liquid-Phase Penetration in DI Sprays1,” SAE Technical Paper 1999-01-0519, 1999, doi:10.4271/1999-01-0519.
26. Myong, K.Arai, M.Suzuki, H.Senda, J., , , et al., “Vaporization Characteristics and Liquid-Phase Penetration for Multi-Component Fuels,” SAE Technical Paper 2004-01-0529, 2004, doi:10.4271/2004-01-0529.
27. Desantes, J.M.Payri, R.Pastor, J.M.Gimeno, J., , , and , “Experimental Characterization of Internal Nozzle Flow and Diesel Spray Behavior. Part I: Nonevaporative Conditions,” Atomization and Sprays 15(5):489-516, 2005.
28. Desantes, J.Payri, R.Salvador, F.Gimeno, J., , , and , “Prediction of Spray Penetration by Means of Spray Momentum Flux,” SAE Technical Paper 2006-01-1387, 2006, doi:10.4271/2006-01-1387.
29. Jeong, H.Lee, K.Ikeda, Y., , and , “Investigation of the Spray Characteristics for a Secondary Fuel Injection Nozzle Using a Digital Image Processing Method,” Measurement Science and Technology 18(5):1591-1602, 2007.
30. Payri, R.Salvador, F.J.Gimeno, J.Zapata, L.D., , , and , “Diesel Nozzle Geometry Influence on Spray Liquid-Phase Fuel Penetration in Evaporative Conditions,” Fuel 87(7):1165-1176, 2008.
31. Pickett, L.Kook, S.Williams, T., , and , “Transient Liquid Penetration of Early-Injection Diesel Sprays,” SAE Int. J. Engines 2(1):785-804, 2009, doi:10.4271/2009-01-0839.
32. Pickett, L.Kook, S.Williams, T., , and , “Visualization of Diesel Spray Penetration, Cool-Flame, Ignition, High-Temperature Combustion, and Soot Formation Using High-Speed Imaging,” SAE Int. J. Engines 2(1):439-459, 2009, doi:10.4271/2009-01-0658.
33. Espey, C.Dec, J. and , “The Effect of TDC Temperature and Density on the Liquid-Phase Fuel Penetration in a D. I. Diesel Engine,” SAE Technical Paper 952456, 1995, doi: 10.4271/952456.
34. Ricart, L.Xin, J.Bower, G.Reitz, R., , , and , “In-Cylinder Measurement and Modeling of Liquid Fuel Spray Penetration in a Heavy-Duty Diesel Engine,” SAE Technical Paper 971591, 1997, doi: 10.4271/971591.
35. Zhang, L.Tsurushima, T.Ueda, T.Ishii, Y., , , et al., “Measurement of Liquid Phase Penetration of vaporating Spray in a DI Diesel Engine,” SAE Technical Paper 971645, 1997, doi: 10.4271/971645.
36. Canaan, R.Dec, J.Green, R.Daly, D., , , and , “The Influence of Fuel Volatility on the Liquid-Phase Fuel Penetration in a Heavy-Duty D.I. Diesel Engine,” SAE Technical Paper 980510, 1998, doi: 10.4271/980510.
37. Wang, T.Han, J.Xie, X.Lai, M., , , et al., “Direct Visualization of High Pressure Diesel Spray and Engine Combustion,” SAE Technical Paper 1999-01-3496, 1999, doi:10.4271/1999-01-3496.
38. Desantes, J.M.Pastor, J.V.Payri, R.Pastor, J.M., , , and , “Experimental Characterization of Internal Nozzle Flow and Diesel Spray Behavior. Part II: Evaporative Conditions,” Atomization and Sprays 15(5):517-543, 2005.
39. Desantes, J.Pastor, J.Martínez, S.Riesco, J., , , and , “Experimental Characterization of the Liquid Phase Penetration on Evaporating Diesel Sprays,” SAE Technical Paper 2005-01-2095, 2005, doi:10.4271/2005-01-2095.
40. Martinez-Martinez, S.Sanchez-Cruz, F.A.Riesco-Avila, J.M.Gallegos-Munoz, A.Aceves, S.M., , , , and , “Liquid Penetration Length in Direct Diesel Fuel Injection,” Applied Thermal Engineering 28(14-15):1756-1762, 2008.
41. Ochoterena, R.Larsson, M.Andersson, S.Denbratt, I., , , and , “Optical Studies of Spray Development and Combustion Characterization of Oxygenated and Fischer-Tropsch Fuels,” SAE Technical Paper 2008-01-1393, 2008, doi:10.4271/2008-01-1393.
42. Siebers, D., “Scaling Liquid-Phase Fuel Penetration in Diesel Sprays Based on Mixing-Limited Vaporization,” SAE Technical Paper 1999-01-0528, 1999, doi:10.4271/1999-01-0528.
43. Fisher, B.T.Mueller, C.J. and , “Liquid Penetration Length of Heptamethylnonane and Trimethylpentane under Unsteady In-Cylinder Conditions,” Fuel 89(10):2673-2696, 2010.
44. Fisher, B.T.Knothe, G.Mueller, C.J., , and , “Liquid-Phase Penetration under Unsteady In-Cylinder Conditions: Soy- and Cuphea-Derived Biodiesel Fuels Versus Conventional Diesel,” Energy and Fuels 24(9):5163-5180, 2010.
45. Kempenaar, J.G.Mueller, C.J.Shollenberger, K.A., , and , “An Instrument for Measuring Orifice-Specific Fuel-Injection Rate from a Multi-Orifice Nozzle (FEDSM2008-55047).” Fluids Engineering Division Summer Meeting, Jacksonville, FL, Aug. 2008. American Society of Mechanical Engineers. 305-312. 2008.
46. Murphy, M.J.Taylor, J.D.McCormick, R.L., , and , “Compendium of Experimental Cetane Number Data,” National Renewable Energy Laboratory Report: NREL/SR-540-36805, 2004.
47. “Diesel 2007 ULSD (7-15 ppm) Certification Fuel,” Chevron Phillips Chemical Company, Sept. 24, 2008. Online source, http://www.cpchem.com/enu/tds_unsecured/Diesel_2007_ULSD.pdf. Accessed Mar. 31, 2010.
48. Mueller, C.Martin, G. and , “Effects of Oxygenated Compounds on Combustion and Soot Evolution in a DI Diesel Engine:Broadband Natural Luminosity Imaging,” SAE Technical Paper 2002-01-1631, 2002, doi:10.4271/2002-01-1631.
49. Mueller, C.Musculus, M. and , “Glow Plug Assisted Ignition and Combustion of Methanol in an Optical DI Diesel Engine,” SAE Technical Paper 2001-01-2004, 2001, doi:10.4271/2001-01-2004.
50. Physical and Thermodynamic Properties of Pure Chemicals, Ed. by Daubert, T.E.Danner, R.P.Sibul, H.M.Stebbins, C.C.Rowley, R.L.Wilding, W.V.Oscarson, J.L.Adams, M.E.Marshall, T.L.Zundel, N.A., , , , , , , , , and Taylor and Francis, New York, 2001. Online source, http://dippr.byu.edu/. Accessed Feb. 27, 2009.
51. Genzale, C.Pickett, L.Kook, S., , and , “Liquid Penetration of Diesel and Biodiesel Sprays at Late-Cycle Post-Injection Conditions,” SAE Int. J. Engines 3(1):479-495, 2010, doi:10.4271/2010-01-0610.