메뉴 건너뛰기
Journal of Micromechanics and Microengineering
Volumn 23, Issue 3, 2013, Pages
A high-brightness light guide plate with high precise double-sided microstructures fabricated using the fixed boundary hot embossing technique
Author keywords

[No Author keywords available]
Indexed keywords

FIXED BOUNDARIES; HOT EMBOSSING PROCESS; HOT EMBOSSING TECHNIQUE; LIGHT GUIDE PLATE; MICRO/NANOSTRUCTURES; NON-UNIFORM PRESSURES; OPEN DIE FORGING; UNIFORM HEATING;
EID: 84878090820     PISSN: 09601317     EISSN: 13616439     Source Type: Journal    
DOI: 10.1088/0960-1317/23/3/035033     Document Type: Article
Times cited : (18)
References (15)
  • 1
    • 33744552157 scopus 로고    scopus 로고
    • Rapid hot embossing of polymer microfeatures
    • DOI 10.1007/s00542-006-0098-y
    • Kimerling T E, Liu W, Kim B H and Yao D 2006 Rapid hot embossing of polymer microfeatures Microsyst. Technol. 12 730-5 (Pubitemid 43814542)
    • (2006) Microsystem Technologies , vol.12 , Issue.8 , pp. 730-735
    • Kimerling, T.E.1    Liu, W.2    Kim, B.H.3    Yao, D.4
  • 2
    • 77957838055 scopus 로고    scopus 로고
    • A gasbag-roller-assisted UV imprinting technique for fabrication of a microlens array on a PMMA substrate
    • 085038
    • Wu J T and Yang S Y 2010 A gasbag-roller-assisted UV imprinting technique for fabrication of a microlens array on a PMMA substrate Micromech. Microeng. 20 085038
    • (2010) Micromech. Microeng. , vol.20
    • Wu, J.T.1    Yang, S.Y.2
  • 3
    • 64149096816 scopus 로고    scopus 로고
    • Luminance and brightness field distribution of light guiding plate for backlight panel (BLP) by micro molding
    • 10.1002/pat.1224 1042-7147
    • Huang C F, Shen Y K, Lin Y, Yang J C and Wu C W 2008 Luminance and brightness field distribution of light guiding plate for backlight panel (BLP) by micro molding Polym. Adv. Technol. 19 1887-93
    • (2008) Polym. Adv. Technol. , vol.19 , Issue.12 , pp. 1887-1893
    • Huang, C.F.1    Shen, Y.K.2    Lin, Y.3    Yang, J.C.4    Wu, C.W.5
  • 4
    • 42549123521 scopus 로고    scopus 로고
    • Fabrication of an LCD light guide plate using closed-die hot embossing
    • 0960-1317 035006
    • Wu C H and Lu C H 2008 Fabrication of an LCD light guide plate using closed-die hot embossing J. Micromech. Microeng. 18 035006
    • (2008) J. Micromech. Microeng. , vol.18 , Issue.3
    • Wu, C.H.1    Lu, C.H.2
  • 5
    • 0038328833 scopus 로고    scopus 로고
    • Flow visualization of filling process during micro-injection molding
    • 0930-777X
    • Yang S Y, Nian S C and Sun I C 2002 Flow visualization of filling process during micro-injection molding Int. Polym. Process. 17 354-60
    • (2002) Int. Polym. Process. , vol.17 , pp. 354-360
    • Yang, S.Y.1    Nian, S.C.2    Sun, I.C.3
  • 6
    • 14044278032 scopus 로고    scopus 로고
    • Flow visualization of filling with aid of colored billets during impact micro-injection molding
    • Nian S C and Yang S Y 2004 Flow visualization of filling with aid of colored billets during impact micro-injection molding Int. Polym. Process. 19 402-407 (Pubitemid 40278915)
    • (2004) International Polymer Processing , vol.19 , Issue.4 , pp. 402-407
    • Nian, S.C.1    Yang, S.Y.2
  • 7
    • 77958550752 scopus 로고    scopus 로고
    • Step and repeat UV nanoimprint lithography on pre-spin coated resist film: A promising route for fabricating nanodevices
    • 10.1088/0957-4484/21/44/445301 0957-4484 445301
    • Peroz C, Dhuey S, Volger M, Wu Y, Olynick D and Cabrini S 2010 Step and repeat UV nanoimprint lithography on pre-spin coated resist film: a promising route for fabricating nanodevices Nanotechnology 21 445301
    • (2010) Nanotechnology , vol.21 , Issue.44
    • Peroz, C.1    Dhuey, S.2    Volger, M.3    Wu, Y.4    Olynick, D.5    Cabrini, S.6
  • 8
    • 64149092738 scopus 로고    scopus 로고
    • Study on the formation defect of nano imprinted optical waveguide devices and nano-indentation detection
    • 10.1002/pat.1164 1042-7147
    • Weng Y J, Weng Y C, Yang S Y and Wong J L 2008 Study on the formation defect of nano imprinted optical waveguide devices and nano-indentation detection Polym. Adv. Technol. 19 1704-9
    • (2008) Polym. Adv. Technol. , vol.19 , Issue.12 , pp. 1704-1709
    • Weng, Y.J.1    Weng, Y.C.2    Yang, S.Y.3    Wong, J.L.4
  • 9
    • 40349089750 scopus 로고    scopus 로고
    • Fabrication of large area resin microlens arrays using gas-assisted ultraviolet embossing
    • DOI 10.1364/OE.16.003041
    • Huang P H, Huang T C, Sun Y T and Yang S Y 2008 Fabrication of large area resin microlens arrays using gas-assisted ultraviolet embossing Opt. Express 16 3041-8 (Pubitemid 351342523)
    • (2008) Optics Express , vol.16 , Issue.5 , pp. 3041-3048
    • Huang, P.-H.1    Huang, T.-C.2    Sun, Y.-T.3    Yang, S.-Y.4
  • 10
    • 51849089090 scopus 로고    scopus 로고
    • Large-area and thin light guide plate fabricated using UV base imprinting
    • 10.1364/OE.16.015033 1094-4087
    • Huang P H, Huang T C, Sun Y T and Yang S Y 2008 Large-area and thin light guide plate fabricated using UV base imprinting Opt. Express 16 15033-8
    • (2008) Opt. Express , vol.16 , Issue.19 , pp. 15033-15038
    • Huang, P.H.1    Huang, T.C.2    Sun, Y.T.3    Yang, S.Y.4
  • 11
    • 0034508819 scopus 로고    scopus 로고
    • Flow behaviour of thin polymer films used for hot embossing lithography
    • DOI 10.1016/S0167-9317(00)00414-7
    • Heydermana L J, Schifta H, Davida C, Gobrechta J and Schweizerb T 2000 Flow behaviour of thin polymer films used for hot embossing lithography Microelectron. Eng. 54 229-45 (Pubitemid 32035506)
    • (2000) Microelectronic Engineering , vol.54 , Issue.3-4 , pp. 229-245
    • Heyderman, L.J.1    Schift, H.2    David, C.3    Gobrecht, J.4    Schweizer, T.5
  • 12
    • 70450285211 scopus 로고    scopus 로고
    • Deformation behavior of solid polymer during hot embossing process
    • 10.1016/j.mee.2009.07.014 0167-9317
    • Liu C, Li J M, Liu J S and Wang L D 2010 Deformation behavior of solid polymer during hot embossing process Microelectron. Eng. 87 200-7
    • (2010) Microelectron. Eng. , vol.87 , Issue.2 , pp. 200-207
    • Liu, C.1    Li, J.M.2    Liu, J.S.3    Wang, L.D.4
  • 13
    • 18744368492 scopus 로고    scopus 로고
    • Development of fluid-based heating and pressing systems for micro hot embossing
    • DOI 10.1007/s00542-004-0481-5
    • Chang J H and Yang S Y 2005 Development of fluid-based heating and pressing systems for micro hot embossing Microsyst. Technol. 11 396-403 (Pubitemid 40666692)
    • (2005) Microsystem Technologies , vol.11 , Issue.6 , pp. 396-403
    • Chang, J.-H.1    Yang, S.-Y.2
  • 14
    • 0742268922 scopus 로고    scopus 로고
    • Gas pressurized hot embossing for transcription of micro-features
    • 10.1007/s00542-003-0311-1 0946-7076
    • Chang J H and Yang S Y 2003 Gas pressurized hot embossing for transcription of micro-features Microsyst. Technol. 10 76-80
    • (2003) Microsyst. Technol. , vol.10 , Issue.1 , pp. 76-80
    • Chang, J.H.1    Yang, S.Y.2
  • 15
    • 30344467564 scopus 로고    scopus 로고
    • Large-scale hot embossing
    • DOI 10.1007/s00542-005-0012-z, Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS
    • Worgull M, Heckele M and Schomburg W K 2005 Large-scale hot embossing Microsyst. Technol. 12 110-5 (Pubitemid 43060925)
    • (2005) Microsystem Technologies , vol.12 , Issue.1 , pp. 110-115
    • Worgull, M.1    Heckele, M.2    Schomburg, W.K.3

* 이 정보는 Elsevier사의 SCOPUS DB에서 KISTI가 분석하여 추출한 것입니다.