Stator-current spectrum signature of healthy cage rotor induction machines

IEEE Transactions on Industrial Electronics

Volumn 60, Issue 9, 2013, Pages 4025-4033

  Joksimovic, Gojko M ^a   Riger, Jaksa ^a   Wolbank, Thomas M ^b   Peric, Nedjeljko ^c   Vasak, Mario ^c  

^a UNIVERSITY OF MONTENEGRO   (Montenegro)

^b VIENNA UNIVERSITY OF TECHNOLOGY   (Austria)

^c UNIVERSITY OF ZAGREB   (Croatia)

Author keywords

Condition monitoring; fault detection; fault diagnosis; Fourier transforms; induction machines; induction motor drives; preventive maintenance; spectrum analysis

Indexed keywords

CONDITION MONITORING; ELECTRIC DRIVES; FAILURE ANALYSIS; FAULT DETECTION; FOURIER TRANSFORMS; HARMONIC ANALYSIS; INDUCTION MOTORS; MAGNETIC FLUX; POLES; PREVENTIVE MAINTENANCE; SPECTRUM ANALYSIS; STATORS;

INDUCTION MACHINES; INDUCTION MOTOR DRIVE; MAGNETOMOTIVE FORCE; MEASURED CURRENTS; MONITORING METHODS; PERMEANCE HARMONICS; ROTOR INDUCTION MOTORS; ROTOR SLOT HARMONICS;

ROTORS (WINDINGS);

EID: 84877740747     PISSN: 02780046     EISSN: None     Source Type: Journal    
DOI: 10.1109/TIE.2012.2236995     Document Type: Article

References (29)

1. A. Bellini, F. Filippetti, C. Tassoni, and G. A. Capolino, "Advances in diagnostic techniques for induction machines," IEEE Trans. Ind. Electron., vol. 55, no. 12, pp. 4109-4126, Dec. 2008.
2. S. H. Kia, H. Henao, and G. A. Capolino, "Windings monitoring of wound rotor induction machines under fluctuating load conditions," in Proc. IEEE IECON, 2011, pp. 3459-3465.
3. R. Kianinezhad, B. Nahid-Mobarakeh, L. Baghli, F. Betin, and G. A. Capolino, "Modeling and control of six-phase symmetrical induction machine under fault condition due to open phases," IEEE Trans. Ind. Electron., vol. 55, no. 5, pp. 1966-1977, May 2008. (Pubitemid 351728751)
4. K.-H. Kim, "Simple online fault detecting scheme for short-circuited turn in a PMSM through current harmonic monitoring," IEEE Trans. Ind. Electron., vol. 58, no. 6, pp. 2565-2568, Jun. 2011.
5. L. Cappochi, S. Toma, G. A. Capolino, F. Fnaiech, and A. Yazidi, "Wound-rotor induction generator short-circuit fault classification using a new neural network based on digital data," in Proc. SDEMPED, 2011, pp. 638-644.
6. L. Saidi, H. Henao, F. Fnaiech, G. A. Capolino, and G. Cirrincione, "Application of higher order spectral analysis for rotor broken bar detection in induction machines," in Proc. SDEMPED, 2011, pp. 31-38.
7. T. M. Wolbank, P. Nussbaumer, H. Chen, and P. E. Macheiner, "Monitoring of rotor-bar defects in inverter-fed induction machines at zero load and speed," IEEE Trans. Ind. Electron., vol. 58, no. 5, pp. 1468-1478, May 2011.
8. M. Blodt, D. Bonacci, J. Regnier, M. Chabert, and J. Faucher, "On-line monitoring of mechanical faults in variable-speed induction motor drives using the Wigner distribution," IEEE Trans. Ind. Electron., vol. 55, no. 2, pp. 522-533, Feb. 2008. (Pubitemid 351344225)
9. C. Bruzzese and G. Joksimovíc, "Harmonic signatures of static eccentricities in the stator voltages and in the rotor current of no-load salientpole synchronous generators," IEEE Trans. Ind. Electron., vol. 58, no. 5, pp. 1606-1624, May 2011.
10. R. N. Andriamalala, H. Razik, L. Baghli, and F. M. Sargos, "Eccentricity fault daignosis of a dual-stator winding induction machine drive considering the slotting effects," IEEE Trans. Ind. Electron., vol. 55, no. 12, pp. 4238-4251, Dec. 2008.
11. V. Choqueuse, M. E. L. Benbouzid, Y. Amirat, and S. Turri, "Diagnosis of three-phase electrical machines using multidimensional demodulation techniques," IEEE Trans. Ind. Electron., vol. 59, no. 4, pp. 2014-2023, Apr. 2012.
12. S. Nandi, T. C. Ilamparithi, S. B. Lee, and D. Hyun, "Detection of eccentricity faults in induction machines based on nameplate parameters," IEEE Trans. Ind. Electron., vol. 58, no. 5, pp. 1673-1683, May 2011.
13. D. Morinigo-Sotelo, L. A. Garcia-Escudero, O. Duque-Perez, and M. Perez-Alonso, "Practical aspects of mixed-eccentricity detection in PWM voltage-source-inverter-fed induction motors," IEEE Trans. Ind. Electron., vol. 57, no. 1, pp. 252-262, Jan. 2010.
14. M. A. Rodriguez-Blanco, A. Claudio-Sanchez, D. Theilliol, L. G. Vela-Valdes, P. Sibaja-Teran, L. Hernandez-Gonzalez, and J. Aguayo-Alquicira, "A failure-detection strategy for IGBT based on gate-voltage behavior applied to a motor drive system," IEEE Trans. Ind. Electron., vol. 58, no. 5, pp. 1625-1633, May 2011.
15. P. Lezana, J. Pou, T. A. Meynard, J. Rodriguez, S. Ceballos, and F. Richardeau, "Survey on fault operation on multilevel inverters," IEEE Trans. Ind. Electron., vol. 57, no. 7, pp. 2207-2218, Jul. 2010.
16. S. Nandi, H. A. Toliyat, and X. Li, "Condition monitoring and fault diagnosis of electrical motors-A review," IEEE Trans. Energy Convers., vol. 20, no. 4, pp. 719-729, Dec. 2005. (Pubitemid 41830047)
17. J. H. Jung, J. J. Lee, and B. H. Kwon, "Online diagnosis of induction motors using MCSA," IEEE Trans. Ind. Electron., vol. 53, no. 6, pp. 1842-1852, Dec. 2006.
18. G. Joksimovíc, J. Riger, T. Wolbank, N. Períc, and M. Vašak, "Stator line current spectrum content of a healthy cage rotor induction machine," in Proc. SDEMPED, Bologna, Italy, Sep. 2011, pp. 113-118.
19. S. Nandi, "Modeling of induction machines including stator and rotor slot effects," IEEE Trans. Ind. Appl., vol. 40, no. 4, pp. 1058-1065, Jul./Aug. 2004.
20. S. Williamson and Y. N. Feng, "Slot-harmonic fields in closed-slot machines," IEEE Trans. Ind. Appl., vol. 44, no. 4, pp. 1165-1171, Jul./Aug. 2008.
21. S. Nandi, "A detailed model of induction machines with saturation extendable for fault analysis," IEEE Trans. Ind. Appl., vol. 40, no. 5, pp. 1302-1309, Sep./Oct. 2004.
22. T. Jokinen and V. Hrabovcova, Design of Rotating Electrical Machines. Hoboken, NJ: Wiley, 2009.
23. G. Joksimovíc, M. Urovíc, and J. Penman, "Cage rotor MMF-Winding function approach," IEEE Power Eng. Rev., vol. 21, no. 4, pp. 64-66, Apr. 2001.
24. Z. Gao, T. G. Habetler, R. G. Harley, and R. S. Colby, "A sensorless rotor temperature estimator for induction machines based on a current harmonic spectral estimation scheme," IEEE Trans. Ind. Electron., vol. 55, no. 1, pp. 407-416, Jan. 2008.
25. X. R. Kiani, F. Betin, V. Lanfranchi, A. Yazidi, and G. A. Capolino, "Intelligent sensorless speed control of six-phase induction machine," in Proc. IECON, 2011, pp. 4198-4203.
26. S. H. Kia, H. Henao, and G. A. Capolino, "Some digital signal processing techniques for induction machines diagnosis," in Proc. SDEMPED, 2011, pp. 322-329.
27. G. Joksimovíc, "Line current spectrum analysis in saturated three-phase cage induction machine," Elect. Eng., vol. 91, no. 8, pp. 425-437, Apr. 2010.
28. B. Cassoret, J. P. Lecointe, and J. F. Brudny, "Influence of the pole number on the magnetic noise of electrical ac machines," Progr. Electromagn. Res. B, vol. 33, pp. 83-97, 2011.
29. K. Kim, A. G. Parlos, and R. M. Bharadwaj, "Sensorless fault diagnosis of induction motors," IEEE Trans. Ind. Electron., vol. 50, no. 5, pp. 1038-1051, Oct. 2003.