Some digital signal processing techniques for induction machines diagnosis

SDEMPED 2011 - 8th IEEE Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives

Volumn , Issue , 2011, Pages 322-329

  Kia, Shahin Hedayati ^a   Henao, Humberto ^a   Capolino, Gérard André ^a  

^a UNIVERSITÉ DE PICARDIE JULES VERNE   (France)

Author keywords

Digital signal processing; Electrical machines; Envelope analysis; Fault diagnosis; Fourier transforms; Motor current signature analysis; Motor protection; Stator current demodulation; Time frequency analysis; Wavelet transforms

Indexed keywords

ELECTRICAL MACHINE; ENVELOPE ANALYSIS; FOURIER; MOTOR CURRENT SIGNATURE ANALYSIS; MOTOR PROTECTION; TIME FREQUENCY ANALYSIS;

DIGITAL SIGNAL PROCESSING; ELECTRIC FAULT CURRENTS; ELECTRIC MACHINERY; FAILURE ANALYSIS; FOURIER TRANSFORMS; FREQUENCY DOMAIN ANALYSIS; POWER ELECTRONICS; STATORS; VIBRATION ANALYSIS; WAVELET TRANSFORMS;

TIME DOMAIN ANALYSIS;

EID: 81255147074     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1109/DEMPED.2011.6063643     Document Type: Conference Paper

References (41)

1. P. Zhang, Y. Du, T. G. Habetler, and B. Lu; "A survey of condition monitoring and protection methods for medium voltage induction motors," in Proc. of IEEE Energy Conversion Congress and Exposition (ECCE), San Jose California (USA), 20-24 Sept. 2009, pp. 3165-3174.
2. A. Bellini, F. Filippetti, C. Tassoni, and G.-A. Capolino, "Advances in diagnostic techniques for induction machines," IEEE Trans. Industrial Electronics, vol. 55, no. 12, pp. 4109-4126, Dec. 2008.
3. S. H. Kia, H. Henao, and G.-A. Capolino, "A high-resolution frequency estimation method for three-phase induction machine fault detection," IEEE Trans. Industrial Electronics, vol. 54, no. 4, pp. 2305-2314, Aug. 2007. (Pubitemid 47296521)
4. M. Aiello, A. Cataliotti, and S. Nuccio, "An induction motor speed measurement method based on current harmonic analysis with the chirp-z transform," IEEE Trans. Instrumentation and Measurement, vol. 54, no. 5, pp. 1811-1819, Oct. 2005. (Pubitemid 41555235)
5. A. Bellini, G. Franceschini, C. Tassoni, "Monitoring of induction machines by maximum covariance method for frequency tracking,"IEEE Trans. Industry Applications, vol. 42, no. 1, pp. 69-78, Jan./Feb. 2006.
6. A. Bellini, A. Yazidi, F. Filippetti, C. Rossi, and G.-A. Capolino, "High frequency resolution techniques for rotor fault detection of induction machines," IEEE Trans. Industrial Electronics, vol. 55, no. 12, pp. 4200-4209, Dec. 2008.
7. F. Cupertino, E. de Vanna, L. Salvatore, and S. Stasi, "Comparison of spectral estimation techniques applied to induction motor broken bars detection," in Proc. of IEEE SDEMPED, Atlanta (USA), 24-26 Aug. 2003, pp. 129-134.
8. S.M. Kay, Modern Spectral Estimation, Englewood Cliffs, Prentice-Hall, 1988.
9. J. R. Stack, R. G. Harley, and T. G. Habetler, "Bearing fault detection via autoregressive stator current modeling," IEEE Trans. Industry Applications, vol. 40, no. 3, pp. 740-747, May/Jun. 2004.
10. B. Ayhan, H. J. Trussell, M.-Y. Chow, and M.-H. Song, Member, IEEE "On the use of a lower sampling rate for broken rotor bar detection with DTFT and AR-based spectrum methods," IEEE Trans. Industrial Electronics, vol. 55, no. 3, pp. 1421-1434, Mar. 2008. (Pubitemid 351447583)
11. F. Cupertino, E. de Vanna, L. Salvatore, and S. Stasi, "Analysis techniques for detection of IM broken rotor bar after supply disconnection," IEEE Trans. Industry Applications, vol. 40, no. 2, pp. 562-533, Mar./Apr. 2004.
12. C. L. Nikias, and J. M. Mendel, "Signal processing with higher-order spectra," IEEE Signal Processing Magazine, pp. 10-38, Jul. 1993.
13. N. Arthur, and J. Penman, "Induction machine condition monitoring with higher order spectra," IEEE Trans. Industrial Electronics, vol. 47, no. 5, pp. 1031-1041, Oct. 2000.
14. J. R. Stack, R. G. Harley, and T. G. Habetler, "An amplitude modulation detector for fault diagnosis in rolling element bearings,"IEEE Trans. Industrial Electronics, vol. 51, no. 5, pp. 1097-1102, Oct. 2004.
15. H. Henao, J. Rastegar, G.-A. Capolino, and S. Sieg-Zieba, "Wire rope fault detection in a hoisting winch system by motor torque and current signature analysis," IEEE Trans. Industrial Electronics, to be published.
16. S. Rajagopalan, J. M. Aller, J. A. Restrepo, T. G. Habetler, and R. G. Harley, "Detection of rotor faults in brushless dc motors operating under nonstationary conditions," IEEE Trans. Industry Applications, vol. 42, no. 6, pp. 1464-1477, Nov./Dec. 2006.
17. M. Blödt, D. Bonacci, J. Regnier, M. Chabert, and J. Faucher, "Online monitoring of mechanical faults in variable-speed induction motor drives using the Wigner distribution," IEEE Trans. Industrial Electronics, vol. 55, no. 2, pp. 522-533, Feb. 2008. (Pubitemid 351344225)
18. M. Blödt, J. Regnier, and J. Faucher, "Distinguishing load torque oscillations and eccentricity faults in induction motors using stator current Wigner distributions," IEEE Trans. Industry Applications, vol. 45, no. 6, pp. 1991-2000, Nov./Dec. 2009.
19. S. Rajagopalan, J. A. Restrepo, J. M. Aller, T. G. Habetler, and R. G. Harley, "Nonstationary motor fault detection using recent quadratic time-frequency representations," IEEE Trans. Industry Applications, vol. 44, no. 3, pp. 735-744, May/Jun. 2008.
20. F. Auger, P. Flandrin, P. Gonçalvès, O. Lemoine, "Time-Frequency Toolbox", CNRS/Rice University, France, 1995/1996, available online at: http://tftb.nongnu.org
21. S. Mallat, A Wavelet Tour of Signal Processing, San Diego, CA, Academic Press, 1999.
22. J. Pons-Llinares, J. A. Antonino-Daviu, M. Riera-Guasp, M. Pineda-Sanchez, and V. Climente-Alarcon, "Induction motor diagnosis based on a transient current analytic wavelet transform via frequency B-Splines,"IEEE Trans. Industrial Electronics, to be published.
23. S. Rajagopalan, J. M. Aller, J. A. Restrepo, T. G. Habetler, and R. G. Harley, "Analytic-wavelet-ridge-based detection of dynamic eccentricity in brushless direct current (BLDC) motors functioning under dynamic operating conditions," IEEE Trans. Industrial Electronics, vol. 54, no. 3, pp. 1410-1419, Jun. 2007.
24. F. Briz, M. W. Degner, P. Garcia, and D. Bragado, "Broken rotor bar detection in line-fed induction machines using complex wavelet analysis of startup transients," IEEE Trans. Industry Application, vol. 44, no. 3, pp. 760-768, May/Jun. 2008.
25. I. P. Tsoumas, G. Georgoulas, E. D. Mitronikas, and A. N. Safacas, "Asynchronous machine rotor fault diagnosis technique using complex wavelets," IEEE Trans. Energy Conversion, vol. 23, no. 2, pp. 444-459, Jun. 2008. (Pubitemid 351728785)
26. S. H. Kia, H. Henao, and G.-A. Capolino, "Diagnosis of broken-bar fault in induction machines using discrete wavelet transform without slip estimation," IEEE Trans. Industry Applications, vol. 45, no. 4, pp. 1395-1404, Jul./Aug. 2009.
27. M. Riera-Guasp, J. A. Antonino-Daviu, M. Pineda-Sanchez, R. Puche-Panadero, and J. Perez-Cruz, "A general approach for the transient detection of slip-dependent fault components based on the discrete wavelet transform," IEEE Trans. Industrial Electronics, vol. 55, no. 12, pp. 4167-4180, Dec. 2008.
28. A. Ordaz-Moreno, R. Romero-Troncoso, J. A. Vite-Frias, J. R. Rivera-Gillen, and A. Garcia-Perez, "Automatic online diagnosis algorithm for broken-bar detection on induction motors based on discrete wavelet transform for FPGA implementation," IEEE Trans. Industrial Electronics, vol. 55, no. 5, pp. 2193-2202, May 2008. (Pubitemid 351728770)
29. N. E. Huang and S. S. P. Shen, Hilbert-Huang Transform and its Applications. Singapore: World Scientific, 2005.
30. J. A. Rosero, L. Romeral, J. A. Ortega, and E. Rosero, "Short-circuit detection by means of empirical mode decomposition and Wigner-Ville distribution for PMSM running under dynamic condition," IEEE Trans. Industrial Electronics, vol. 56, no. 11, pp. 4534-4547, Nov. 2009.
31. J. A. Antonino-Daviu, M. Riera-Guasp, M. Pineda-Sanchez, and R. B. Pérez, "A critical comparison between DWT and Hilbert-Huang-based methods for the diagnosis of rotor bar failures in induction machines,"IEEE Trans. Industry Applications, vol. 45, no. 5, pp. 1794-1803, Sep./Oct. 2009.
32. B. Boashash, Time Frequency Signal Analysis and Processing - A Comprehensive Reference, 1st ed. Oxford, U.K.: Elsevier, 2003.
33. M. Blödt, M. Chabert, J. Regnier, and J. Faucher, "Mechanical load fault detection in induction motors by stator current time-frequency analysis," IEEE Trans. Industry Applications, vol. 42, no. 6, pp. 1454-1463, Nov./Dec. 2006.
34. R. Puche-Panadero, M. Pineda-Sanchez, M. Riera-Guasp, J. Roger-Folch, E. Hurtado-Perez, and J. Perez-Cruz, "Improved resolution of the MCSA method via Hilbert transform, enabling the diagnosis of rotor asymmetries at very low slip," IEEE Trans. Energy Conversion, vol. 24, no. 1, pp. 52-59, March 2009.
35. S. H. Kia, H. Henao, G.-A. Capolino, "Analytical and experimental study of gearbox mechanical effect on the induction machine stator current signature," IEEE Trans. Industry Applications, vol. 45, no. 4, pp. 1405-1415, Jul./Aug. 2009.
36. A. M. da Silva, R. J. Povinelli, and N. A. O. Demerdash, "Induction machine broken bar and stator short-circuit fault diagnostics based on three-phase stator current envelopes," IEEE Trans. Industrial Electronics, vol. 55, no. 3, pp. 1310-1318, March 2008.
37. W. Zhou, T. G. Habetler, and R. G. Harley, "Bearing fault detection via stator current noise cancellation and statistical control," IEEE Trans. Industrial Electronics, vol. 55, no. 12, pp. 4260-4269, Dec. 2008.
38. H. Douglas, P. Pillay, and A. K. Ziarani, "A new algorithm for transient motor current signature analysis using wavelets," IEEE Trans. Industry Applications, vol. 40, no. 5, pp. 1361-1368, Sep./Oct. 2004.
39. B. Akin, U. Orguner, H. A. Toliyat, and M. Rayner, "Phase-sensitive detection of motor fault signatures in the presence of noise," IEEE Trans. Industrial Electronics, vol. 55, no. 6, pp. 2539-2550, Jun. 2008.
40. S.H. Kia, H. Henao, G.-A. Capolino, "Torsional vibration assessment using induction machine electromagnetic torque estimation," IEEE Trans. Industrial Electronics, vol. 57, no. 1, pp. 209-219, Jan. 2010.
41. B. Trajin, J. Regnier, and J. Faucher, "Comparison between stator current and estimated mechanical speed for the detection of bearing wear in asynchronous drives," IEEE Trans. Industrial Electronics, vol. 56, no. 11, pp 4700-4709, Nov. 2009.