Harmonic signatures of static eccentricities in the stator voltages and in the rotor current of no-load salient-pole synchronous generators

IEEE Transactions on Industrial Electronics

Volumn 58, Issue 5, 2011, Pages 1606-1624

  Bruzzese, Claudio ^a   Joksimovic, Gojko ^b  

^a SAPIENZA UNIVERSITY OF ROME   (Italy)

^b UNIVERSITY OF MONTENEGRO   (Montenegro)

Author keywords

Fault diagnosis; machine voltage analysis; rotor current analysis; rotor eccentricities; synchronous generator (SG)

Indexed keywords

FAULT DIAGNOSIS; FAULT SENSITIVITY; FUNDAMENTAL FREQUENCIES; LOAD VOLTAGES; MACHINE VOLTAGE ANALYSIS; ROTATION FREQUENCIES; ROTOR CURRENT; ROTOR CURRENT ANALYSIS; ROTOR ECCENTRICITIES; SALIENT POLE SYNCHRONOUS MACHINES; STATIC ECCENTRICITIES; STATOR VOLTAGES; STATOR WINDING; THEORETICAL PREDICTION; VOLTAGE HARMONICS; WINDING FUNCTION APPROACH;

EXPERIMENTS; HARMONIC ANALYSIS; POLES; ROTORS; ROTORS (WINDINGS); SPOT WELDING; STATORS; SYNCHRONOUS GENERATORS; TRANSFORMER WINDINGS; WINDING;

ELECTRIC FAULT CURRENTS;

EID: 79954476144     PISSN: 02780046     EISSN: None     Source Type: Journal    
DOI: 10.1109/TIE.2010.2087296     Document Type: Article

References (28)

1. P. J. Tavner, B. G. Gaydon, and D. M. Ward, "Monitoring generators and large motors," Proc. Inst. Elect. Eng., vol. 133, pt. B, no. 3, pp. 169-180, May 1986.
2. Y. P. Aksenov, I. V. Yaroshenko, G. Noe, A. V. Andreev, and I. Arces, "Pattern analysis of turbine generators on-line discharge zone location in windings," in Proc. IEEE SDEMPED Conf., Cargese, France, Aug. 31-Sep. 3 2009, pp. 1-6.
3. J. Edmonds, A. Daneshpooy, S. J. Murray, and R. A. Sire, "Turbogenerators stator core study," in Proc. IEEE SDEMPED Conf., Cracow, Poland, Sep. 6-8, 2007, pp. 441-446.
4. R. Romary, S. Jelassi, and J. F. Brudny, "Stator-interlaminar-fault detection using an external-flux-density sensor," IEEE Trans. Ind. Electron., vol. 57, no. 1, pp. 237-243, Jan. 2010.
5. P. Talas and P. Toom, "Dynamic measurement and analysis of air gap variations in large hydroelectric generators," IEEE Trans. Power App. Syst., vol. PAS-102, no. 9, pp. 3098-3106, Sep. 1983. (Pubitemid 13603609)
6. G. B. Pollock and J. F. Lyles, "Vertical hydraulic generators experience with dynamic air gap monitoring," IEEE Trans. Energy Convers., vol. 7, no. 4, pp. 660-668, Dec. 1992. (Pubitemid 23590733)
7. M. Kiani, W. J. Lee, R. Kenarangui, and B. Fahimi, "Detection of rotor faults in synchronous generators," in Proc. IEEE SDEMPED Conf., Cracow, Poland, Sep. 6-8, 2007, pp. 266-271.
8. P. J. Tavner and J. Penman, Condition Monitoring of Electrical Machines. Letchworth, U.K.: Res. Press Limited, 1987.
9. H. A. Toliyat and S. Nandi, "Condition monitoring and fault diagnosis of electrical machines," in Conf. Rec. IEEE IAS Annu. Meeting, Phoenix, AZ, Oct. 3-7, 1999, pp. 197-204. (Pubitemid 30544182)
10. J. Bialik and J. Zawilak, "Vibration modeling of the two-speed, large power, synchronous motor," in Proc. IEEE SDEMPED Conf., Cracow, Poland, Sep. 6-8, 2007, pp. 173-177.
11. G. Traxler-Samek, T. Lugand, and A. Schwery, "Additional losses in the damper winding of large hydrogenerators at open-circuit and load conditions," IEEE Trans. Ind. Electron., vol. 57, no. 1, pp. 154-160, Jan. 2010.
12. J. Faiz and M. Ojaghi, "Instantaneous-power harmonics as indexes for mixed eccentricity fault in mains-fed and open/closed-loop driveconnected squirrel-cage induction motors," IEEE Trans. Ind. Electron., vol. 56, no. 11, pp. 4718-4726, Nov. 2009.
13. H. A. Toliyat and T. A. Lipo, "Transient analysis of cage induction machines under stator, rotor bar and end ring faults," IEEE Trans. Energy Convers., vol. 10, no. 2, pp. 241-247, Jun. 1995.
14. G. M. Joksimovic, "Dynamic simulation of cage induction machine with air gap eccentricity," Proc. Inst. Elect. Eng.-Electr. Power Appl., vol. 152, no. 4, pp. 803-811, Jul. 2005. (Pubitemid 41067896)
15. W. T. Thomson and A. Barbour, "On line current monitoring and application of a finite element method to predict the level of static airgap eccentricity in three-phase induction motors," IEEE Trans. Energy Convers., vol. 13, no. 4, pp. 347-357, Dec. 1998.
16. G. M. Joksimovic, M. D. Durovic, J. Penman, and N. Arthur, "Dynamic simulation of dynamic eccentricity in induction machines-Winding function approach," IEEE Trans. Energy Convers., vol. 15, no. 2, pp. 143-148, Jun. 2000.
17. R. N. Andriamalala, H. Razik, L. Baghli, and F. M. Sargos, "Eccentricity fault diagnosis of a dual-stator winding induction machine drive considering the slotting effects," IEEE Trans. Ind. Electron., vol. 55, no. 12, pp. 4238-4251, Dec. 2008.
18. A. Bellini, F. Filippetti, C. Tassoni, and G. A. Capolino, "Advances in diagnostic techniques for induction machines," IEEE Trans. Ind. Electron., vol. 55, no. 12, pp. 4109-4126, Dec. 2008.
19. D. Morinigo-Sotelo, L. A. Garcia-Escudero, O. Duque-Perez, and M. Perez-Alonso, "Practical aspects of mixed-eccentricity detection in PWM voltage-source-inverter-fed induction motors," IEEE Trans. Ind. Electron., vol. 57, no. 1, pp. 252-262, Jan. 2010.
20. C. Bruzzese, E. Santini, V. Benucci, and A. Millerani, "Model-based eccentricity diagnosis for a ship brushless generator exploiting the Machine Voltage Signature Analysis (MVSA)," in Proc. IEEE SDEMPED Conf., Cargese, France, Aug. 31-Sep. 3, 2009, pp. 1-9.
21. H. A. Toliyat and N. A. Al-Nuaim, "Simulation and detection of dynamic air-gap eccentricity in salient-pole synchronous machines," IEEE Trans. Ind. Appl., vol. 35, no. 1, pp. 86-93, Jan./Feb. 1999.
22. N. A. Al-Nuaim and H. A. Toliyat, "A novel method for modeling dynamic air-gap eccentricity in synchronous machines based on modified winding function theory," IEEE Trans. Energy Convers., vol. 13, no. 2, pp. 156-162, Jun. 1998. (Pubitemid 128741425)
23. C. Bruzzese, A. Giordani, and E. Santini, "Static and dynamic rotor eccentricity on-line detection and discrimination in synchronous generators by no-load E.M.F. space vector loci analysis," in Proc. SPEEDAM Conf., Ischia, Italy, Jun. 18-20, 2008, pp. 1259-1264.
24. C. Bruzzese, A. Giordani, A. Rossi, and E. Santini, "Synchronous generator eccentricities modeling by an improved MWFA and fault signature evaluation in no-load E.M.F.s and current spectra," in Proc. SPEEDAM Conf., Ischia, Italy, Jun. 18-20, 2008.
25. X. Luo, Y. Liao, H. A. Toliyat, A. El-Antably, and T. A. Lipo, "Multiple coupled circuit modeling of induction machines," IEEE Trans. Ind. Appl., vol. 31, no. 2, pp. 311-318, Mar./Apr. 1995.
26. G. M. Joksimovic, D. M. Durovic, and B. A. Obradovic, "Skew and linear rise of MMF across slot modeling-winding function approach," IEEE Trans. Energy Convers., vol. 14, no. 3, pp. 315-320, Sep. 1999.
27. G. M. Joksimovic and J. Penman, "The detection of inter-turn short circuits in the stator windings of operating motors," IEEE Trans. Ind. Electron., vol. 47, no. 5, pp. 1078-1084, Oct. 2000.
28. X. Tu, L. A. Dessaint, M. El Kahel, and A. O. Barry, "A new model of synchronous machine internal faults based on winding distribution," IEEE Trans. Ind. Electron., vol. 53, no. 6, pp. 1818-1828, Dec. 2006.