Drying of thin colloidal films

Reports on Progress in Physics

Volumn 76, Issue 4, 2013, Pages

  Routh, Alexander F ^a  

^a UNIVERSITY OF CAMBRIDGE   (United Kingdom)

Author keywords

[No Author keywords available]

Indexed keywords

CHEMISTRY; COLLOID; MECHANICS; PHASE TRANSITION; REVIEW; VOLATILIZATION;

COLLOIDS; MECHANICAL PROCESSES; PHASE TRANSITION; VOLATILIZATION;

COLLOID;

EID: 84875937292     PISSN: 00344885     EISSN: None     Source Type: Journal    
DOI: 10.1088/0034-4885/76/4/046603     Document Type: Article

References (195)

1. Russel W B, Saville D A and Schowalter W R 1991 Colloidal Dispersions (Cambridge: Cambridge University Press)
2. Hunter R J 1985 Colloid Science (Oxford: Oxford University Press)
3. Deegan R D, Bakajin O, Dupont T F, Huber G, Nagel S R and Witten T A 1997 Capillary flow as the cause of ring stains from dried liquid drops Nature 389 827-9
4. Sheetz D P 1965 Formation of films by drying of latex J. Appl. Polym. Sci. 9 3759-73
5. Goehring L, Conroy R, Akhter A, Clegg W J and Routh A F 2010 Evolving mud crack patterns Soft Matter 6 3562-7
6. Wu Y, Eliyahu J, Liu P and Hu N-X 2012 Solvent based inke comprising silver nanoparticles US Patent Application
7. van Dam D B and Kuertan J G M 2008 Modeling the drying of ink-jet-printed structures and experimental verification Langmuir 24 582-9
8. Gaskin R E (ed) 2007 Annulus spray deposit structures and enhanced ai-adjuvant association with adjunvanted flowables Proc. 8th Int. Symp. on Adjuvans for Agrochemicals (ASAA2007) (Columbus, OH, USA,) (The Netherlands: International Society for Agrochemical Adjuvants)
9. Faers M A and Pontzen R 2008 Factors influencing the association between active ingredient and adjuvant in the leaf deposit of adjuvant containing suspoemulsion formulations Pest Manag. Sci. 64 820-33
10. Willmer D, Baldwin K A, Kwartnik C and Fairhurst D J 2010 Growth of solid conical structures during multistage drying of sesile poly(ethylene oxide) droplets Phys. Chem. Chem. Phys. 12 3998-4004
11. Baldwin K A, Granjard M, Willmer D I, Sefiane K and Fairhurst D J 2011 Drying and deposition of poly(ethylene oxide) droplets determined by peclet number Soft Matter 7 7819-26
12. Baldwin K A, Roest S, Fairhurst D J, Sefiane K and Shanahan M E R 2012 Monolith formation and ring-stain suppression in low-pressure evaporation of poly(ethylene oxide) droplets J. Fluid Mech. 695 321-9
13. Kajiya T, Nishitani E, Yamaue T and Doi M 2006 Piling-to-buckling transition in the drying process of polymer solution drop on substrate having a large contact angle Phys. Rev. E 73 011601
14. Head D A 2006 Modeling the elasticdeformation of polymer crusts formed by sessile droplet evaporation Phys. Rev. E 74 021601
15. Han W and Lin Z 2012 Learning from 'coffee rings': ordered structures enabled by controlled evaporative self-assembly Angew. Chem. Int. Ed. 51 1534-46
16. Harris D J, Hu H, Conrad J C and Lewis J A 2007 Patterning colloidal films via evaporative lithography Phys. Rev. Lett. 98 148301
17. Harris D J and Lewis J A 2008 Marangoni effects on evaporative lithographic patterning of colloidal films Langmuir 24 3681-5
18. Harris D J, Conrad J C and Lewis J A 2009 Evaporative lithographic patterning of binary colloidal films Phil. Trans. R. Soc. A 367 5157-65
19. Parneix C, Vandoolaeghe P, Nikolayev V S, Quere D, Li J and Cabane B 2010 Dips and rims in dried colloidal films Phys. Rev. Lett. 105 266103
20. Georgiadis A, Routh A F, Murray M W and Keddie J L 2011 Bespoke periodic topography in hard polymer films by infrared radiation-assisted evaporative lithography Soft Matter 7 11098-102
21. Georgiadis A, Bryant P A, Murray M W, Beharrell P and Keddie J L 2011 Resolving the film formation dilemma with infrared radiation assisted sintering Langmuir 27 2176-80
22. Keddie J L and Georgiadis A 2010 A method of making a hard latex and and hard latex World Patent Application
23. Georgiadis A, Muhamad F N and Keddie J L 2013 Aesthetically-textured hard latex coatings by fast IR-assisted evaporative lithography Prog. Org. Coat. accepted
24. Utgenannt A, Keddie J L, Muskens O L and Kanaras A G 2013 Directed organisation of gold nanoparticles in polymer coatings through infrared-assisted evaporative lithography Chem. Commun. Advance article DOI:10.1039/C2CC37844B
25. Arshad T A and Bonnecaze R T 2013 Templated evaporative lithography for high throughput fabrication of nanopatterned films Nanoscale 5 624-33
26. Keddie J L and Routh A F 2010 Fundamentals of Latex Film Formation: Processes and Properties (Springer Laboratory) (Berlin: Springer)
27. Keddie J L 1997 Film formation of latex Mater. Sci. Eng. R 21 101-70
28. Yunker P J, Still T, Lohr M A and Yodh A G 2011 Suppression of the coffee-ring effect by shape dependent capillary interactions Nature 476 308-11
29. Eral H B, Mampallil Augustine D, Duits M H G and Mugele F 2011 Suppressing the coffee stain effect: how to control colloidal self-assembly in evaporating drops using electrowetting Soft Matter 7 4954-8
30. Shmuylovich L, Shen A Q and Stone H A 2002 Surface morphology of drying latex films: multiple ring formation Langmuir 18 3441-5
31. White L R 1982 Capillary rise in powders J. Colloid Interface Sci. 90 536-8
32. Routh A F and Russel W B 1999 A process model for latex film formation: limiting regimes for individual driving forces Langmuir 15 7762-73
33. Salamanca J M, Ciampi E, Faux D A, Glover P M, McDonald P J, Routh A F, Peters A C I A, Satguru R and Keddie J L 2001 Lateral drying in thick films of waterborne polymer colloids Langmuir 17 3202-8
34. Goehring L, Clegg W J and Routh A F 2010 Solidification and ordering during drying of a colloidal dispersion Langmuir 26 9269-75
35. Routh A F, Russel W B, Tang J and El-Aasser M S 2001 A process model for latex film formation: optical drying fronts J. Coat. Technol. 73 41-8
36. Hodges C S, Ding Y and Biggs S 2010 The influence of nanoparticle shape on the drying of colloidal dispersions J. Colloid Interface Sci. 352 99-106
37. Haw M D, Gillie M and Poon W C K 2001 Effects of phase behaviour on the drying of colloidal suspensions Langmuir 18 1626-33
38. Ma Y, Davis H T and Scriven L E 2005 Microstructure development in drying latex coatings Prog. Org. Coat. 52 46-62
39. Petersen C, Heldmann C and Johannsmann D 1999 Internal stresses during film formation of polymer latices Langmuir 15 7745-51
40. Tirumkudulu M S and Russel W B 2004 Role of capillary stresses in film formation Langmuir 20 2947-61
41. Yow H N, Beristain I, Goikeotxea M, Barandiaran M J and Routh A F 2010 Evolving stresses in latex films as a function of temperature Langmuir 26 6335-42
42. Yow H N, Goikeotxea M, Goehring L and Routh A F 2010 Effect of film thickness and particle size on cracking stresses in drying latex films J. Colloid Interface Sci. 352 542-8
43. Vanderhoff J W, Bradford E B and Carrington W K 1973 The transport of water through latex films J. Polym. Sci. 41 155-74
44. Croll S G 1986 Drying of latex paint J. Coat. Technol. 58 41-9
45. Croll S G 1987 Heat and mass transfer in latex paints during drying J. Coat. Technol. 59 81-92
46. Reyes Y and Duda Y 2005 Modeling of drying in films of colloidal particles Langmuir 21 7057-60
47. Routh A F and Zimmerman W B 2004 Distribution of particles during solvent evaporation from films Chem. Eng. Sci. 59 2961-8
48. Ekanayake P, McDonald P J and Keddie J L 2009 An experimental test of the scaling prediction for the spatial distribution of water during the drying of colloidal films Euro. Phys. J. Spec. Top. 166 21-7
49. Narita T, Hebraud P and Lequeux F 2005 Effects of the rate of evaporation and film thickness on the nonuniform drying of film-forming concentrated colloidal suspensions Euro. Phys. J. E 17 69-76
50. Konig A M, Weerakkody T G, Keddie J L and Johannsmann D 2008 Heterogeneous drying of colloidal polymer films: dependence on added salt Langmuir 24 7580-9
51. Sarkar A and Tirumkudulu M S 2009 Consolidation of charged colloids during drying Langmuir 25 4945-53
52. Buss F, Roberts C C, Crawford K S, Peters K and Francis L F 2011 Effect of soluble polymer binder on particle distribution in a drying particulate coating J. Colloid Interface Sci. 359 112-20
53. Shimmin R G, DiMauro A J and Braun P V 2006 Slow vertical deposition of colloidal crystals: a langmuir-blodgett process? Langmuir 22 6507-13
54. Cardinal C M, Jung Y D, Ahn K H and Francis L F 2010 Drying regime maps for particulate coatings AIChE J. 56 2769-80
55. Trueman R E, Lago Domingues E, Emmett S N, Murray M and Routh A F 2012 Auto-stratification in drying colloidal dispersions: a diffusive model J. Colloid Interface Sci. 377 207-12
56. Trueman R E, Lago Domingues E, Emmett S N, Murray M, Keddie J L and Routh A F 2012 Auto-stratification in drying colloidal dispersions: experimental investigations Langmuir 18 3420-8
57. Atmuri A, Bhatia S R and Routh A F 2012 Auto-stratification in drying colloidal dispersions: effect of particle interactions Langmuir 28 2652-8
58. Nikiforow I, Adams J, Konig A M, Langhoff A, Phol K, Turshatov A and Johannsmann D 2010 Self-stratification during film formation from latex blends driven by differences in collective diffusivity Langmuir 26 13162-7
59. Luo H, Cardinal C M, Scriven L E and Francis L F 2008 Ceramic nanoparticle/monodisperse latex coatings Langmuir 24 5552-61
60. Lei C H, Ouzineb K, Dupont O and Keddie J L 2007 Probing particle structure in waterborne pressure-sensitive adhesives with atomic force microscopy J. Colloid Interface Sci. 307 56-63
61. Gundabala V R, Lei C H, Ouzineb K, Dupont O, Keddie J L and Routh A F 2008 Lateral surface nonuniformities in drying latex films AIChE J. 54 3092-105
62. Gundabala V R, Zimmerman W B and Routh A F 2004 A model for surfactant distribution in latex coatings Langmuir 20 8721-7
63. Dingenouts N and Ballauff M 1999 First stage of film formation by latexes investigated by small angle x-ray scattering Langmuir 15 3283-8
64. Mallegol J, Bennett G, McDonald P J and Keddie J L 2006 Skin development during the film formation of waterborne acrylic pressure-sensitive adhesives containing tackifying resin J. Adhes. 82 217-38
65. Ciampi E and McDonald P J 2003 Skin formation and water distribution in semicrystalline polymer layers cast from solution: a magnetic resonance imaging study Macromolecules 36 8398-405
66. Wallin M, Glover P M, Hellgren A C, Keddie J L and McDonald P J 2000 Depth profiles of polymer mobility during the film formation of a latex dispersion undergoing photoinitiated cross-linking Macromolecules 33 8443-52
67. Juillerat F, Bowen P and Hoffman H 2006 Formation and drying of colloidal crystals using nanosized silica particles Langmuir 22 2249-57
68. Zhou Z, Li Q and Zhao X S 2006 Evolution of interparticle capillary forces during drying of colloidal crystals Langmuir 22 3692-7
69. Bucklow S 1997 The description of craquelure patterns Stud. Conservation 42 129-40
70. Bucklow S 1999 Description and classification of craquelure Stud. Conservation 44 233-44
71. Ball P 2004 Material witness: watching paint dry Nature Mater. 3 851
72. Walker J 1986 The amateur scientist: cracks in a surface look intricaly random but actually develop rather systematically Sci. Am. 255 204-11
73. Chiu R C, Garino T J and Cima M J 1993 Drying of granular ceramic films: I. Effect of processing variables on cracking behavior J. Am. Ceram. Soc. 76 2257-64
74. Chiu R C and Cima M J 1993 Drying of granular ceramic films: II. Drying stress and saturation uniformity J. Am. Ceram. Soc. 76 2769-77
75. Smith M I and Sharp J S 2011 Effects of substrate constraint on crack pattern formation in thin films of colloidal polystyrene particles Langmuir 27 8009-17
76. Tarafdar S and Sinha S 2008 Crack formation in dryin glaponite Indust. Eng. Chem. Res. 47 6459-64
77. Neda Z, Leung K t, Jozsa L and Ravasz M 2002 Spiral cracks in drying precipitates Phys. Rev. Lett. 88 5502
78. Lazarus V and Pauchard L 2011 From craquelures to spiral crack patterns: influence of layer thickness on the crack patterns induced by desiccation Soft Matter 7 2552-9
79. Goehring L, Clegg W J and Routh A F 2011 Wavy cracks in drying colloidal films Soft Matter 7 7984-7
80. Jing G and Ma J 2012 Formation of circular crack pattern in deposition self-assembled by drying nanoparticle suspension J. Phys. Chem. B 116 6225-31
81. Pauchard L, Adda-Bedia M, Allain C and Couder Y 2003 Morphologies resulting from the directional propagation of fractures Phys. Rev. E 67 7103
82. Hopfield J J 1946 Spiral cracks in glass tubes Nature 158 582-3
83. Yuse A and Sano M 1993 Transition between crack patterns in quenched glass plates Nature 362 329-31
84. Sasa S, Sekimoto K and Nakanishi H 1994 Oscillatory instability of crack propogations in quasistatic fracture Phys. Rev. E 50 1733-6
85. Adda-Bedia M and Pomeau Y 1995 Crack instabilities of a heated glass strip Phys. Rev. E 52 4105-13
86. Marder M 1994 Instability of a crack in a heated strip Phys. Rev. E 49 51-4
87. Boeck T, Bahr H A, Lampenscherf S and Bahr U 1999 Self-driven propogation of crack arrays: a stationary two-dimensional model Phys. Rev. E 59 1408-16
88. Yuse A and Sano M 1997 Instabilities of quasi-static crack patterns in quenched glass plates Physica D 108 365-78
89. Yang B and Ravi-Chandar K 2001 Crack path instabilities in a quenched glass plate J. Mech. Phys. Solids 49 91-130
90. Groisman A and Kaplan E 1994 An experimental study of cracking induced by desiccation Europhys. Lett. 25 415-20
91. Bohn S, Pauchard L and Couder Y 2005 Hierarchical crack pattern as formed by successive domain divisions: I. Temporal and geometrical hierarchy Phys. Rev. E 71 046214
92. Gauthier G, Lazarus V and Pauchard L 2010 Shrinkage star-shaped cracks: explaining the transition from 90 degrees to 120 degrees Eur. Phys. Lett. 89 6002
93. Shorlin K A, de Bruyn J R, Graham M and Morris S W 2000 Development and geometry of isotropic and directional shrinkage-crack patterns Phys. Rev. E 61 6950-7
94. Gabrielli A, Cafiero R and Caldarelli G 1999 Statistical properties of fractures in damaged materials Europhys. Lett. 45 13-9
95. Korvin G 1989 Fractured but not fractal: fragmentation of the gulf of Suez basement Pure Appl. Geophys. 131 289-305
96. Bohn S, Platkiewicz J, Andreotti B, Adda-Bedia M and Couder Y 2005 Hierarchical crack pattern as formed by successive domain divisions: II. From disordered to deterministic behaviour Phys. Rev. E 71 046215
97. Tirumkudulu M S and Russel W B 2006 Cracking in drying latex films Langmuir 21 4938-48
98. Holmes D M, Kumar R V and Clegg W J 2006 Cracking during lateral drying of alumina suspensions J. Am. Ceram. Soc. 89 1908-13
99. Dufresne E R, Corwin E I, Greenblatt N A, Ashmore J, Wang D Y, Dinsmore A D, Cheng J X, Xie X S, Hutchinson J W and Weitz D A 2003 Flow and fracture in drying nanoparticle suspensions Phys. Rev. Lett. 91 4501
100. Dufresne E R, Stark D J, Greenblatt N A, Cheng J X, Hutchinson J W, Mahadevan L and Weitz D A 2006 Dynamics of fracture in drying suspensions Langmuir 22 7144-7
101. Lei H, Payne J A, McCormick A V, Francis L F, Gerberich W W and Scriven L E 2001 Stress development in drying coatings J. Appl. Poly. Sci. 81 1000-13
102. Lei H, Francis L F, Gerberich W W and Scriven L E 2002 Stress development in drying coatings after solidification AIChE J. 48 437-51
103. Cotterell B and Rice J R 1980 Slightly curved or kinked cracks Int. J. Fract. 16 155-169
104. Beuth J L 1992 Cracking of thin bonded films in residual tension Int. J. Solids Struct. 29 1657-75
105. Goehring L, Clegg W J and Routh A F 2013 Plasticity and fracture in drying colloidal films Phys. Rev. Lett. 110 024301
106. Bordia R K and Jagota A 1993 Crack growth and damage in constrained sintering films J. Am. Ceram. Soc. 76 2475-85
107. Jagota A and Hui C Y 1990 Mechanics of sintering thin films: I. Formulation and analytical results Mech. Mater. 9 107-19
108. Jagota A and Hui C Y 1991 Mechanics of sintering thin films: II. Cracking due to self-stress Mech. Mater. 11 221-34
109. Ye T, Suo Z and Evans A G 1992 Thin film cracking and the roles of substrate and interface Int. J. Solids Struct. 29 2639-48
110. Nahta R and Moran B 1995 Crack spacing in brittle films on dissimilar planar and axisymmetric elastic substrates Eng. Fract. Mech. 52 513-24
111. Beuth J L and Klingbeil N W 1996 Cracking in thin films bonded to elastic-plastic substrates J. Mech. Phys. Solids 44 1411-28
112. Schulze G W and Erdogan F 1998 Periodic cracking of elastic coatings Int. J. Solids Struct. 35 3615-34
113. Parker A P 1999 Stability of arrays of multiple edge cracks Eng. Fract. Mech. 62 577-91
114. Xia Z C and Hutchinson J W 2000 Crack patterns in thin films J. Mech. Phys. Solids 48 1107-31
115. Bai T, Pollard D D and Gao H 2000 Explanation for fracture spacing in layered materials Nature 403 753-6
116. Adda-Bedia M and Ben Amar M 2001 Fracture spacing in layered materials Phys. Rev. Lett. 86 9007
117. Hull D and Caddock B D 1999 Simulation of prismatic cracking of cooling basaly lava by the drying of sol-gels J. Mater. Sci. 34 5707-20
118. Lee W P and Routh A F 2004 Why do drying films crack? Langmuir 20 9885-8
119. Jagla E A 2002 Stable propagation of an ordered array of cracks during directional drying Phys. Rev. E 65 046147
120. Allain C and Limat L 1995 Regular patterns of cracks formed by directional drying of a colloidal suspension Phys. Rev. Lett. 74 2981-4
121. Komatsu T S and Sasa S I 1997 Pattern selection of cracks in directionally drying fracture Japan. J. Appl. Phys. 36 391-5
122. Gauthier G, Lazarus V and Pauchard L 2007 Alternating crack propagation during directional drying Langmuir 23 4715-8
123. Lee W P and Routh A F 2006 Temperature dependence of crack spacing in drying latex films Indust. Eng. Chem. Res. 45 6996-7001
124. Singh K B and Tirumkudulu M S 2007 Cracking in drying colloidal films Phys. Rev. Lett. 98 218302
125. Singh K B, Bhosale L R and Tirumkudulu M S 2009 Cracking in drying colloidal films of flocculated dispersions Langmuir 25 4284-7
126. Pauchard L, Parisse C and Allain F 1999 Influence of salt content on crack patterns formed through colloidal suspension desiccation Phys. Rev. E 59 3737-40
127. Kanai T and Sawada T 2009 New route to produce dry colloidal crystals without cracks Langmuir 25 12215-3317
128. Tzitzinou A, Keddie J L, Geurts J M, Peters A C I A and Satguru R 2000 Film formation of latex blends with bimodal particle size distributions: consideration of particle deformability and continuity of the dispersed phase Macromolecules 33 2695-708
129. Singh K B, Deoghare G and Tirumkudulu M S 2009 Cracking in soft-hard latex blends: theory and experiments Langmuir 25 751-60
130. Winnik M A and Feng J 1996 Latex blends: an approach to zero VOC coatings J. Coat. Technol. 68 39-50
131. Qiao J, Adams J and Johannsmann D 2012 Addition of halloysite nanotibes prevents cracking in drying latex films Langmuir 28 8674-80
132. Bellet D and Canham L 1998 Controlled drying; the key to better quality porous semiconductors Adv. Mater. 10 487-90
133. Picknett R G and Bexon R 1977 The evaporation of sessile or pendant drops in still air J. Colloid Interface Sci. 61 336-50
134. Erbil H Y, McHale G and Newton M I 2002 Drop evaporation on solid surfaces: constant contact angle mode Langmuir 18 2636-41
135. Popov Y O 2005 Evaporative deposition patterns: spatial dimension of the deposit Phys. Rev. E 71 036313
136. Deegan R D 2000 Pattern formation in drying drops Phys. Rev. E 61 475-85
137. Deegan R D, Bakajin O, Dupont T F, Huber G, Nagel S R and Witten T A 2000 Contact line deposits in an evaporating drop Phys. Rev. E 62 756-65
138. Hu H and Larson R G 2002 Evaporation of a sessile droplet on a substrate J. Phy. Chem. B 106 1334-44
139. Routh A F and Russel W B 1998 Horizontal drying fronts during solvent evaporation from latex films AIChE J. 44 2088-98
140. Fischer B J 2002 Particle convection in an evaporating droplet Langmuir 18 60-7
141. de Gans B J and Schubert U S 2004 Inkjet printing of well-defined polymer dots and arrays Langmuir 20 7789-93
142. O'Brien F E M 1948 The control of humidity by saturated salt solutions J. Sci. Instrum. Phys. Industry 25 73-6
143. Rockland L B 1960 Saturated salt solutions for static control of relative humidity between 5 °C and 40 °C Anal. Chem. 32 1375-6
144. Haines W B 1920 Studies in the physical properties of soil: V. The hysteresis effect in capillary properties and the modes of moisture distribution associated therewith J. Agric. Sci. 20 97-116
145. Haas A and Revil A 2009 Electrical burst signature of pore-scale displacements Water Resources Res. 45 10202
146. Herbert E, Balibar S and Caupin F 2006 Cavitation pressure in water Phys. Rev. E 74 1603
147. Kohonen M M 2006 Engineered wettability in tree capillaries Langmuir 22 3148-53
148. Oron A, Davis S H and Bankoff S G 1997 Long-scale evolution of thin liquid films Rev. Mod. Phys. 69 931-80
149. Craster R V and Matar O K 2009 Dynamics and stability of thin liquid films Rev. Mod. Phys. 81 1131-98
150. Leal L G 1992 Laminar Flow and Convective Transport Processes: scaling Principles and Asymptotic Analysis (Butterworth-Heinemann Series in Chemical Engineering) (Boston, MA: Butterworth-Heinemann)
151. Zimmerman W B, Rees J M and Hewakandamby B N 2007 Numerical analysis of solutocapillary marangoni-induced interfacial waves Adv. Colloid Interface Sci. 134-135 346-59
152. Gundabala V R and Routh A F 2006 Thinning of drying latex films under the action of surfactant J. Colloid Interface Sci. 303 306-14
153. Yiantsios S G and Higgins B G 2006 Marangoni flows during drying of colloidal films Phys. Fluids 18 082103
154. Troian S M, Wu X L and Safran S A 1989 Fingering instability in thin wetting films Phys. Rev. Lett. 62 1496-1500
155. Yiantsios S G and Higgins B G 2010 A mechanism of marangoni instability in evaporating thin liquid films due to soluble surfactant Phys. Fluids 22 022102
156. Block M J 1956 Surface tension as the cause of Benard cells and surface deformation in a liquid film Nature 178 650-1
157. Vanhook S J, Schatz M F, Swift J B, McCormick M F and Swinney H L 1997 Long-wavelength surface tension driven benard convection:experiment and theory J. Fluid Mech. 345 45-78
158. Pearson J R A 1958 On convection cells induced by surface tension J. Fluid Mech. 4 489-500
159. Okuzono T, Kobayashi M and Doi M 2009 Final shape of a drying thin film Phys. Rev. E 80 021603
160. Kobayashi M, Makino M, Okuzono T and Doi M 2010 Interference effect in the drying of polymer droplets on substrate J. Phys. Soc. Japan 79 4802
161. Wang J and Evans J R G 2006 Segregation in multicomponent ceramic colloids during drying of droplets Phys. Rev. E 73 021501
162. Weonm B M and Je J H 2010 Capillary force reples coffee-ring effect Phys. Rev. E 82 015305
163. Bastacky J, Wodley C, LaBrie R and Backhus C 1987 A bibliography of low-temperature scanning electron microscopy (LTSEM, cryo-SEM) and scanning electron microscopy of frozen hydrated biological systems Scanning 9 219-25
164. Luo H, Scriven L E and Francis L F 2007 Cryo-SEM studies of latex/ceramic nanoparticle coating microstructure development J. Colloid Interface Sci. 316 500-9
165. Danilatos G D 1993 Introduction to the ESEM instrument Microsc. Res. Techn. 25 354-61
166. Keddie J L, Meredith P, Jones R A L and Donald A M 1995 Kinetics of film formation in acrylic latices studied with multiple-angle-of-incidence ellipsometry and environmental SEM Macromolecules 28 1673-2682
167. Keddie J L, Meredith P, Jones R A L and Donald A M 1996 Film formation of acrylic latices with varying concentrations of non-film-forming latex particles Langmuir 12 3793-801
168. Dragnevski K I, Routh A F, Murray M W and Donald A M 2010 Cracking in drying latex films: an ESEM experiment Langmuir 26 7747-51
169. Tzitzinou A, Jenneson P M, Clough A S, Keddie J L, Lu J R, Zhdan P, Treacher K E and Satguru R 1999 Surfactant concentration and morphology at the surfaces of acrylic latex films Prog. Org. Coat. 35 89-99
170. Mallegol J, Dupont O and Keddie J 2003 Morphology and elasticity of waterborne acrylic pressure-sensitive adhesives investigated with atomic force microscopy J. Adhes. Sci. 17 243-59
171. Mantle M D and Sederman A J 2003 Dynamic MRI in chemical process and reaction engineering Prog. Nucl. Magn. Reson. Spectrosc. 43 3-60
172. Glover P M, Aptaker P S, Bowler J R, Ciampi E and McDonald P J 1999 A novel high-gradient permanent magnet for the profiling of planar films and coatings J. Magn. Reson. 139 90-7
173. Ludwig I, Schabel W, Kind M, Castaing J C and Ferlin P 2007 Drying and film formation of industrial waterborne latices AIChE J. 53 549-60
174. Ludwig I, Schabel W, Ferlin P, Castaing J C and Kind M 2009 Drying, film formation and open time of aqueous polymer dispersions Eur. Phys. J. Spec. Top. 166 39-43
175. Arnold C, Thalmann F, Marques C, Marie Y and Holl P 2010 Surfactant distribution in waterborne acrylic films: I. Bulk investigation J. Phys. Chem. B 114 9135-47
176. Arnold C, Klein G, Maaloum M, Ernstsson M, Larsson A, Marie Y and Holl P 2011 Surfactant distribution in waterborne acrylic films: II. Surface investigation Colloids Surf. A 374 58-68
177. Francis L F, McCormick A V, Vaessen D M and Payne J A 2002 Development and measurement of stress in polymer coatings J. Mater. Sci. 37 4717-31
178. Wedin P, Lewis J A and Bergstrom L 2005 Soluble organic additive effects on stress development during drying of calcium carbonate suspensions J. Colloid Interface Sci. 290 134-44
179. Martinez C J and Lewis J A 2002 Shape evolution and stress development during latex-silica film formation Langmuir 18 4689-98
180. von der Ehe K and Johannsmann D 2007 Maps of the stress distribution in drying latex films Rev. Sci. Instrum. 78 113904
181. Konig A M and Johannsmann D 2010 Stress fluctuations in drying polymer dispersions Langmuir 26 9437-41
182. Konig A M, Bourgeat-Lami E, Mellon V, von der Ehe K, Routh A F and Johannsmann D 2010 Dilational lateral stress in drying latex films Langmuir 26 3815-20
183. Xu Y, Engl W C, Jerison E R, Wallenstein K J, Hyland C, Wilen L A and Dufresne E R 2010 Imaging in-plane and normal stresses near an interface crack using traction force microscopy Proc. Natl Acad. Sci. 107 14964-7
184. Jerison E R, Xu Y, Wilen L A and Dufresne E R 2011 Deformation of an elastic substrate by a three-phase contact line Phys. Rev. Lett. 106 186103
185. German G K, Engl W C, Pashkovski E, Banerjee S, Xu Y, Mertz A F, Hyland C and Dufresne E R 2012 Heterogeneous drying stresses in stratum corneum Biophys. J. 102 2424-32
186. Rossnagel S M, Gilstrap P and Rujkorakarn R 1982 Stress measurement in thin films by geometrical optics J. Vac. Sci. Technol. 21 1045-6
187. Li J, Cabane B, Sztucki M, Gummel J and Goehring L 2012 Drying dip-coated colloidal films Langmuir 28 200-8
188. Dingenouts N and Ballauff M 1998 Assessment of spatial order in dried latexes by small angle x-ray sacttering Macromolecules 31 7423-9
189. Rieger J, Hadicke E, Ley G and Lindner P 1992 Crystals made of close-packed polymeric spheres: a neutron scattering study on latex films Phys. Rev. Lett. 68 2782-5
190. Joanicot M, Wong K, Richard J, Maquet J and Cabane B 1993 Ripening of cellular latex films Macromolecules 26 3168-75
191. Mallegol J, Gorce J P, Dupont O, Jeynes C, McDonald P J and Keddie J 2002 Origins and effects of a surfactant excess near the surface of waterborne acrylic pressure sensitive adhesives Langmuir 18 4478-87
192. Kunkel J P and Urban M W 1993 Surface and interfacial FT-IR spectroscopic studies of latexes: VIII. The effect of particle and copolymer composition on surfactant exudation in styrene-n-butyl acrylate copolymer latex films J. Appl. Polym. Sci. 50 1217-23
193. Zhao C L, Dobler F, Pith T, Holl Y and Lambla M 1989 Surface composition of coalesced acrylic latex films studied by XPs and SIMs J. Colloid Interface Sci. 128 437-49
194. Kajiya T and Doi M 2008 Dynamics of drying process of polymer solution droplets: analysis of polymer transport and control of film profiles Nihon Reoroji Gakkaishi 39 17-28
195. Kajiya T, Kobayashi W, Okuzono T and Doi M 2010 Controlling profiles of polymer dots by switching between evaporation and condensation Langmuir 26 10429-32