Wear performances and wear mechanism study of bulk UHMWPE composites with nacre and CNT fillers and PFPE overcoat

Wear

Volumn 300, Issue 1-2, 2013, Pages 44-54

  Liu, Yemei ^a   Sinha, Sujeet K ^b  

^a NATIONAL UNIVERSITY OF SINGAPORE   (Singapore)

^b INDIAN INSTITUTE OF TECHNOLOGY KANPUR   (India)

Author keywords

Composite; Lubrication; Polymer; UHMWPE

Indexed keywords

CRYSTALLINITIES; PARTICLE REINFORCEMENT; PERFLUOROPOLYETHERS; PFPE LUBRICANTS; PIN-ON-DISK TRIBOMETERS; WATER MOLECULE; WEAR MECHANISMS; WEAR PERFORMANCE;

COMPOSITE MATERIALS; FILLERS; GEMS; HYDROGEN BONDS; JOINTS (ANATOMY); LUBRICATION; MAMMALS; POLYMERS; PROTEINS; REINFORCEMENT; TRIBOLOGY; ULTRAHIGH MOLECULAR WEIGHT POLYETHYLENES; WEAR OF MATERIALS;

NONMETALLIC MATRIX COMPOSITES;

EID: 84875345152     PISSN: 00431648     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.wear.2013.01.102     Document Type: Article

References (49)

1. Ingham E., Fisher J. The role of macrophages in osteolysis of total joint replacement. Biomaterials 2005, 26:1271-1286.
2. Kanaga Karuppiah K.S., Bruck A.L., Sundararajan S., Wang J., Lin Z., Xu Z.-H., Li X. Friction and wear behavior of ultra-high molecular weight polyethylene as a function of polymer crystallinity. Acta Biomaterialia 2008, 4:1401-1410.
3. Bruck A.L., Kanaga Karuppiah K.S., Sundararajan S., Wang J., Lin Z. Friction and wear behavior of ultrahigh molecular weight polyethylene as a function of crystallinity in the presence of the phospholipid dipalmitoyl phosphatidylcholine. Journal of Biomedical Materials Research Part B: Applied Biomaterials 2010, 93B:351-358.
4. Lewis G., Fencl R.M., Carroll M., Collins T. The relative influence of five variables on the in vitro wear rate of uncrosslinked UHMWPE acetabular cup liners. Biomaterials 2003, 24:1925-1935.
5. Colaço R., Gispert M.P., Serro A.P., Saramago B. An energy-based model for the wear of UHMWPE. Tribology Letters 2007, 26:119-124.
6. Sobieraj M.C., Kurtz S.M., Rimnac C.M. Large deformation compression induced crystallinity degradation of conventional and highly crosslinked UHMWPEs. Biomaterials 2005, 26:6430-6439.
7. Pruitt L.A. Deformation, yielding, fracture and fatigue behavior of conventional and highly cross-linked ultra high molecular weight polyethylene. Biomaterials 2005, 26:905-915.
8. Galetz M., Glatzel U. Molecular deformation mechanisms in UHMWPE during tribological loading in artificial joints. Tribology Letters 2010, 38:1-13.
9. Muratoglu O.K., Bragdon C.R., O'Connor D.O., Jasty M., Harris W.H., Gul R., McGarry F. Unified wear model for highly crosslinked ultra-high molecular weight polyethylenes (UHMWPE). Biomaterials 1999, 20:1463-1470.
10. Atwood S.A., Van Citters D.W., Patten E.W., Furmanski J., Ries M.D., Pruitt L.A. Tradeoffs amongst fatigue, wear, and oxidation resistance of cross-linked ultra-high molecular weight polyethylene. Journal of the Mechanical Behavior of Biomedical Materials 2011, 4:1033-1045.
11. Fu J., Ghali B.W., Lozynsky A.J., Oral E., Muratoglu O.K. Wear resistant UHMWPE with high toughness by high temperature melting and subsequent radiation cross-linking. Polymer 2011, 52:1155-1162.
12. Oral E., Wannomae K.K., Hawkins N., Harris W.H., Muratoglu O.K.O.K. [alpha]-Tocopherol-doped irradiated UHMWPE for high fatigue resistance and low wear. Biomaterials 2004, 25:5515-5522.
13. Renò F., Cannas M. UHMWPE and vitamin E bioactivity: An emerging perspective. Biomaterials 2006, 27:3039-3043.
14. Edidin A.A., Pruitt L., Jewett C.W., Crane D.J., Roberts D., Kurtz S.M. Plasticity-induced damage layer is a precursor to wear in radiation-cross-linked UHMWPE acetabular components for total hip replacement. Journal of Arthroplasty 1999, 14:616-627.
15. Gomoll A., Wanich T., Bellare A. J-integral fracture toughness and tearing modulus measurement of radiation cross-linked UHMWPE. Journal of Orthopaedic Research 2002, 20:1152-1156.
16. Furmanski J., Anderson M., Bal S., Greenwald A.S., Halley D., Penenberg B., Ries M., Pruitt L. Clinical fracture of cross-linked UHMWPE acetabular liners. Biomaterials 2009, 30:5572-5582.
17. Kurtz S.M., Pruitt L.A., Jewett C.W., Foulds J.R., Edidin A.A. Radiation and chemical crosslinking promote strain hardening behavior and molecular alignment in ultra high molecular weight polyethylene during multi-axial loading conditions. Biomaterials 1999, 20:1449-1462.
18. Goodman S.B., Fornasier V.L., Lee J., Kei J. The histological effects of the implantation of different sizes of polyethylene particles in the rabbit tibia. Journal of Biomedical Materials Research 1990, 24:517-524.
19. Green T.R., Fisher J., Stone M., Wroblewski B.M., Ingham E. Polyethylene particles of a [']critical size' are necessary for the induction of cytokines by macrophages in vitro. Biomaterials 1998, 19:2297-2302.
20. Affatato S., Fernandes B., Tucci A., Esposito L., Toni A. Isolation and morphological characterisation of UHMWPE wear debris generated in vitro. Biomaterials 2001, 22:2325-2331.
21. Ingram J.H., Stone M., Fisher J., Ingham E. The influence of molecular weight, crosslinking and counterface roughness on TNF-alpha production by macrophages in response to ultra high molecular weight polyethylene particles. Biomaterials 2004, 25:3511-3522.
22. Tipper J.L., Firkins P.J., Besong A.A., Barbour P.S.M., Nevelos J., Stone M.H., Ingham E., Fisher J. Characterisation of wear debris from UHMWPE on zirconia ceramic, metal-on-metal and alumina ceramic-on-ceramic hip prostheses generated in a physiological anatomical hip joint simulator. Wear 2001, 250:120-128.
23. Kevin Plumlee C.J.S. Improved wear resistance of orthopaedic UHMWPE by reinforcement with zirconium particles. Wear 2009, 267:710-717.
24. Christian S.B., Schwartz J., Mallapragada K. Effect of crosslinking and Pt-Zr quasicrystal fillers on the mechanical properties and wear resistance of UHMWPE for use in artificial joints. Wear 2007, 263:1072-1080.
25. Wang D.Z.Q., Ge S. Biotribological behavior of ultra-high molecular weight polyethylene composites containing Ti in a hip joint simulator. Proc. ImechE 2007, 221:307-313.
26. Ge S.W.Shirong, Huang Xiaolong Increasing the wear resistance of UHMWPE acetabular cups by adding natural biocompatible particles. Wear 2009, 267:770-776.
27. Chang N., Bellare A., Cohen R.E., Spector M. Wear behavior of bulk oriented and fiber reinforced UHMWPE. Wear 2000, 241:109-117.
28. Xie X.L., Tang C.Y., Chan K.Y.Y., Wu X.C., Tsui C.P., Cheung C.Y. Wear performance of ultrahigh molecular weight polyethylene/quartz composites. Biomaterials 2003, 24:1889-1896.
29. Liu A., Qu S., Chao M., Zhu M., Weng J., Zhou Z. UHMWPE carrying estradiol to treat the particle-induced osteolysis-Processing and characterizing. Journal of Biomedical Materials Research Part A 2009, 90A:496-505.
30. Balani K., Anderson R., Laha T., Andara M., Tercero J., Crumpler E., Agarwal A. Plasma-sprayed carbon nanotube reinforced hydroxyapatite coatings and their interaction with human osteoblasts in vitro. Biomaterials 2007, 28:618-624.
31. Balani K., Chen Y., Harimkar S.P., Dahotre N.B., Agarwal A. Tribological behavior of plasma-sprayed carbon nanotube-reinforced hydroxyapatite coating in physiological solution. Acta Biomaterialia 2007, 3:944-951.
32. Zoo Y.-S., An J.-W., Lim D.-P., Lim D.-S. Effect of carbon nanotube addition on tribological behavior of UHMWPE. Tribology Letters 2004, 16:305-309.
33. Atlan G., Balmain N., Berland S., Vidal B., Lopez É. Reconstruction of human maxillary defects with nacre powder: histological evidence for bone regeneration. Comptes Rendus de l'Académie des Sciences - Series III - Sciences de la Vie 1997, 320:253-258.
34. Duplat D., Chabadel A., Gallet M., Berland S., Bédouet L., Rousseau M., Kamel S., Milet C., Jurdic P., Brazier M., Lopez E. The in vitro osteoclastic degradation of nacre. Biomaterials 2007, 28:2155-2162.
35. Lamghari M., Berland S., Laurent A., Huet H., Lopez E. Bone reactions to nacre injected percutaneously into the vertebrae of sheep. Biomaterials 2001, 22:555-562.
36. Westbroek P., Marin F. A marriage of bone and nacre. Nature 1998, 392:861-862.
37. Panjwani B., Satyanarayana N., Sinha S.K. Tribological characterization of a biocompatible thin film of UHMWPE on Ti6Al4V and the effects of PFPE as top lubricating layer. Journal of the Mechanical Behavior of Biomedical Materials 2011, 4:953-960.
38. N. Satyanarayana, S.K. Sinha, Tribology of PFPE overcoated self-assembled monolayers deposited on silicon surface: Effect of thermal treatment, in: 2005 World Tribology Congress III, September 12, 2005-September 16, 2005, American Society of Mechanical Engineers, Washington, D.C., United states, 2005, pp. 401-402.
39. Satyanarayana N., Sinha S.K., Ong B.H. Tribology of a novel UHMWPE/PFPE dual-film coated onto Si surface. Sensors and Actuators A: Physical 2006, 128:98-108.
40. Sinha S., Lee C., Lim S.C. Tribological Performance of UHMWPE and PFPE Coated Films on Aluminium Surface. Tribology Letters 2008, 29:193-199.
41. Heuberger M.P., Widmer M.R., Zobeley E., Glockshuber R., Spencer N.D. Protein-mediated boundary lubrication in arthroplasty. Biomaterials 2005, 26:1165-1173.
42. DesJardins J., Aurora A., Tanner S.L., Pace T.B., Acampora K.B., Laberge M. Increased total knee arthroplasty ultra-high molecular weight polyethylene wear using a clinically relevant hyaluronic acid simulator lubricant. Proc. Inst. Mech. Eng. H 2006, 220:609-623.
43. Ruan S.L., Gao P., Yang X.G., Yu T.X. Toughening high performance ultrahigh molecular weight polyethylene using multiwalled carbon nanotubes. Polymer 2003, 44:5643-5654.
44. Kanagaraj S., Varanda F.R., Zhil'tsova T.V., Oliveira M.S.A., Simões J.A.O. Mechanical properties of high density polyethylene/carbon nanotube composites. Composites Science and Technology 2007, 67:3071-3077.
45. Martínez-Morlanes M.J., Castell P., Martínez-Nogués V., Martinez M.T., Alonso P.J., Puértolas J.A. Effects of gamma-irradiation on UHMWPE/MWNT nanocomposites. Composites Science and Technology 2011, 71:282-288.
46. Li L., Li B., Hood M.A., Li C.Y. Carbon nanotube induced polymer crystallization: The formation of nanohybrid shish-kebabs. Polymer 2009, 50:953-965.
47. Haggenmueller R., Fischer J.E., Winey K.I. Single wall carbon nanotube/polyethylene nanocomposites: nucleating and templating polyethylene crystallites. Macromolecules 2006, 39:2964-2971.
48. Sui G., Zhong W.H., Ren X., Wang X.Q., Yang X.P. Structure, mechanical properties and friction behavior of UHMWPE/HDPE/carbon nanofibers. Materials Chemistry and Physics 2009, 115:404-412.
49. Yang B.X., Pramoda K.P., Xu G.Q., Goh S.H. Mechanical reinforcement of polyethylene using polyethylene-grafted multiwalled carbon nanotubes. Advanced Functional Materials 2007, 17:2062-2069.