Achieving a Hot Melt Extrusion Design Space for the Production of Solid Solutions

Chemical Engineering in the Pharmaceutical Industry: R&D to Manufacturing

Volumn , Issue , 2010, Pages 819-836

  Schenck, Luke ^a   Troup, Gregory M ^a   Lowinger, Mike ^a   Li, Li ^a   Mckelvey, Craig ^a  

^a MERCK RESEARCH LABORATORIES   (United States)

Author keywords

Hot melt extrusion design space for production of solid solutions; Multiple processes and process conditions material with similar in vivo response risk assessment, and quality attribute definition; Solid state and thermal characterization methods coupled with DFSS driven measurement system analysis

Indexed keywords

EID: 84874020529     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1002/9780470882221.ch42     Document Type: Chapter

References (48)

1. Repka M, Majumdar S, Battu SK, Srirangam R, Upadhye SB. Application of hot-melt extrusion for drug delivery. Expert Opin. Drug Deliv. 2008;5(12):1357-1376
2. Lipinski C. Poor aqueous solubility-an industry wide problem in drug discovery. Am. Pharm. Rev. 2002;5:82-85
3. Benet LZ,WuCY. Using a Biopharmaceutics Drug Disposition Classification System to Predict Bioavailability and Elimination Characteristics of New Molecular Entities. NJDMDG, Somerset, NJ, 2006
4. Leuner C, Dressman J. Improving drug solubility for oral delivery using solid dispersion. Eur. J. Pharm. Biopharm. Sci. 00;50(1):47-60
5. Serajuddin A.T.M. Solid dispersion of poorly water-soluble drugs: Early promises, subsequent problems, and recent breakthroughs. J. Pharm. Sci. 1999;88(10):1058-1066
6. Chiou WL, Riegelman S. Pharmaceutical applications of solid dispersion systems. J. Pharm. Sci. 1971;60(9):1281-130
7. Yu L. Amorphous pharmaceutical solids: Preparation, characterization and stabilization. Adv. Drug Deliv. Rev. 2001;48(1):27-42
8. Friesen DT, Shanker R, Crew M, Smithey DT, Curatolo WJ, Nightingale JA. Hydroxypropyl methylcellulose acetate succinate-based spray-dried dispersions: An overview. Mol. Pharmaceut. 2008;5(6):1003-1019
9. Curatolo W, Nightingale JA, Herbig SM. Utility of hydroxylpropylmethylcellulose acetate succinate (HPMCAS) for initiation and maintenance of drug supersaturation in the GI milieu. Pharm. Res. 2009;26(6):1419-1431
10. Oh DM, Curl RL, Amidon GL. Estimating the fraction of dose absorbed from suspensions of poorly soluble compounds in humans:Amathematicalmodel.Pharm.Res.1993;10(2):264-270
11. Moser JD, et al. Enhancing bioavailability of poorly soluble drugs using spray dried solid dispersions: Part I. Am. Pharm. Rev. (2008), 11(6):68, 70-71, 73
12. Vanden Mooter G, et al. Evaluation of Inutec SP1 as a new carrier in the formulation of solid dispersions for poorly soluble drugs. Int. J. Pharm. 2006;316(1-2):1-6
13. Janssens S, et al. Characterization of ternary solid dispersions of itraconazole, PEG 6000, and HPMC 2910, J. Pharm. Sci. 2008;97(6):2110-2120
14. Patterson JE, et al. Preparation of glass solutions of three poorly soluble drugs by spray drying, melt extrusion and ball milling. Int. J. Pharm. 2007;336(1):22-34
15. Dong Z, et al. Evaluation of solid state properties of solid dispersions prepared by hot-melt extrusion and solvent coprecipitation. Int. J. Pharm. 2008;355(1-2):141-149
16. Patterson JE, et al. Melt extrusion and spray drying of carbamazepine and dipyridamole with polyvinylpurrolidone/vinyl acetate copolymers. Drug Dev. Ind. Pharm. 2008;34(1):95-106
17. Hauser JR. The house of quality. Harvard Bus. Rev. 1988; May-June:3-13
18. ICH Q9. Quality Risk Management
19. Kim EK, White JL. Transient compositional effects from feeders in a starved flow modular co-rotating twin-screw extruder. Polym. Eng. Sci. 2002;42 (Nov):2084-2093
20. Todd D. Practical aspects of processing in intermeshing twin screw extruders. J. Reinforc. Plast. Compos. 1998; Vol. 17: 1607-1616
21. Lee SH. Continuous mixing of low viscosity and high viscosity polymer melts in a modular co-rotating twin screwextruder. Int. J. Polym. Proc. 1997; Vol. 12:316-322
22. Ishibashi J, Kikutani T. Experimental study of factors influencing throughput rate and process of polymer-mineral filler mixing in a twin screw extruder. Int. Polym. Proc. 2005; 20(4):388-397
23. Todd D. Plastics Compounding: Equipment & Processing, Hanser, Munich, 1998
24. Todd D. Practical aspects of processing in intermeshing twin screw extruders. J. Reinforc. Plast. Compos. 1998; Vol. 17: 1607-1616
25. Todd D. Melting of plastics in kneading blocks. Int. Polym. Proc. 1993; 113-118
26. Tadmor Z, Klein I. Engineering Principles of Plasticating Extrusion, Van Nostrand Reinhold, New York, 1970
27. Jung J, White JL. Investigation of melting phenomena in modular co-rotating twin screw extrusion. Int. Polym. Process. 2003;XVIII:127-132
28. Rauwendaal C. Polymer Extrusion, 4th edition,HanserGardner Publications, Inc., Cincinnati, OH, 2001, pp. 463-476
29. Potluri R, Todd D, Gogos C. Mixing immiscible blends in an intermeshing counter-rotating twin screwextruder. Adv. Polym. Technol. 2006; Vol. 25 no. 2:81-89
30. Lim S, White JL. Flow mechanisms, material distributions and phase morphology development in a modular intermeshing counter-rotating twin screw extruder of Leistritz design. Int. Polym. Process. 1994;IX:33-45
31. Denn MM. Simulation of polymer melt processing. AIChE J. 09; Vol. 55 1641-1647
32. Brouwer T, Todd D, Janssen LPB. Flow characteristics of screws and special mixing enhancers in a co-rotating twin screw extruder. Int. Polym. Process. 2002;XVII:26-32
33. Tadmor Z, Gogos C. Principles of Polymer Processing, 2nd edition, Wiley, 2006, pp. 322-354
34. Sekiguchi K, Obi N. Studies on absorption of entectic mixtures. Chem. Pharm. Bull. 1961;9:866-872
35. Breitenbach J. Melt extrusion: From process to drug delivery technology. Eur. J. Pharm. Biopharm. 2002;54(2): 7-117
36. ICH Q3C (R3). Impurities: Guidelines for Residual Solvents
37. Young CR, et al. Production of spherical pellets by a hot-melt extrusion and spheronization process. Int. J. Pharm. 2002;242:87-92
38. Rauwendaal, Cdel Pilar Noriega M. Troubleshooting the Extrusion Process, Hanser Gardner Publications, Inc, Cincinnati, OH, 2001, pp.67-70
39. Chong J. Calendering thermoplastic materials. J. Appl. Polym. Sci. 1968;12(1):19
40. Isayev A. Injection and Compression Molding Fundamentals, CRC Press, Boca Raton, FL, 1987
41. Nakamichi K, Nakano T, Yasuura J, Izumi S, Kawashima Y. The role of the kneading paddle and the effects of screw revolution speed and water content on the preparation of solid dispersions using a twin-screw extruder. Int. J. Pharm. 2002;241:203-211
42. Verreck G, et al. Hot stage extrusion of P-amino salicylic acid with EC usingCO2 as temporary plasticizer. J. Supercrit. Fluid. 2006;327:45-50
43. Munjal M, Elsohly MA, Repka MA. Polymeric systems for amorphous D9-tetrahydrocannabinol produced by hot-melt method. Part II: Effect of oxidation mechanisms and chemical interactions on stability. J. Pharm. Sci. 2006; (11):2473-2485
44. Villetti MA, et al. Thermal degradation of natural polymers. J. Therm. Anal. Calorim. 2002;67:295-303
45. Chen H, Sundararaj U, Nandakumar K, Wetzel MD. Investigation of the melting mechanism in an twin-screw extruder using a pulse method and online measurement. Ind. Eng. Chem. Res. 2004;43:6822-6831
46. Puaux JP, Bozga G, Ainser A. Residence time distribution in an corotating twin-screw extruder. Chem. Eng. Sci. 2000; :1641-1651
47. Kim EK, White JL. Transient compositional effects from feeders in a starved flow modular co-rotating twin-screw extruder. Polym. Eng. Sci. Nov 2002; 2084-2093
48. Zhu Y. Multivariable System Identification for Process Control, Pergamon, New York, 2001