Beyond the numbers: Charting chemical reaction space

Organic Process Research and Development

Volumn 17, Issue 1, 2013, Pages 40-46

  Murray, Paul M ^a   Tyler, Simon N G ^a   Moseley, Jonathan D ^a  

^a CATSCI LTD   (United Kingdom)

Author keywords

[No Author keywords available]

Indexed keywords

CRITICAL INFORMATION; DISCRETE PARAMETERS; KEY FEATURE; PARAMETER SETTING; POTENTIAL REACTIONS; TRANSITION-METAL-CATALYSED REACTIONS;

DESIGN OF EXPERIMENTS; OPTIMIZATION; PRINCIPAL COMPONENT ANALYSIS; TRANSITION METALS;

INFORMATION DISSEMINATION;

EID: 84872691770     PISSN: 10836160     EISSN: 1520586X     Source Type: Journal    
DOI: 10.1021/op300275p     Document Type: Article

References (58)

1. Custers, J. P. A.; Hersmis, M. C.; Meuldijk, J.; Vekemans, J. A. J. M.; Hulshof, L. A. Org. Process Res. Dev. 2002, 6, 645-651
2. Moseley, J. D.; Bansal, P.; Bowden, S. A.; Couch, A. E. M.; Hubacek, I.; Weingärtner, G. Org. Process Res. Dev. 2006, 10, 153-158
3. Anderson, N. G. Practical Considerations for Scale-Up. In Practical Process Research and Development: A Guide For Organic Chemists, 2 nd ed.; Academic Press: New York, 2012.
4. Reichardt, C.; Welton, T. Solvents and Solvent Effects in Organic Chemistry, 4 th ed.; Wiley-VCH: Weinheim, 2011.
5. Anderson, N. G. Solvent Selection. In Practical Process Research and Development: A Guide For Organic Chemists, 2 nd ed.; Academic Press: New York, 2012.
6. Lathbury, D. Org. Process Res. Dev. 2007, 11, 104 and references therein
7. Although at small scale the agitation method and vessel geometry are rarely important (although see the following for a rare example at small scale: Lennox, A. J. J.; Lloyd-Jones, G. C. J. Am. Chem. Soc. 2012, 134, 7431-7441), such issues often become significant on scale-up as discussed in ref 3
8. It is worth noting that the solvent boiling point may not be limiting when using autoclave or sealed vessel microwave reactors. Indeed, at least one experimental design study predicted that better results could be achieved above the solvent boiling point, for which the authors then used microwave technology; see: Gopalsamy, A.; Shi, M.; Nilakantan, R. Org. Process Res. Dev. 2007, 11, 450-454
9. Corey, E. J.; Cheng, X.-M. The Logic of Chemical Synthesis; John Wiley and Sons: New York, 1995.
10. Nicolaou, K. C.; Sorensen, E. J. Classics in Total Synthesis; VCH, Weinheim, 1996.
11. Blaser, H. U.; Schmidt, E., Eds. Asymmetric Catalysis on Industrial Scale; Wiley-VCH: Weinheim, 2004.
12. Blaser, H. U.; Federsel, H.-J., Eds. Asymmetric Catalysis on Industrial Scale, 2 nd ed.; Wiley-VCH: Weinheim, 2010.
13. Slagt, V. F.; de Vries, A. H. M.; de Vries, J. G.; Kellogg, R. M. Org. Process Res. Dev. 2010, 14, 30-47
14. Magano, J.; Dunetz, J. R. Chem. Rev. 2011, 111, 2177-2250
15. Lewis acid cooperation in Ni catalysis: Nakao, Y.; Yamada, Y.; Kashihara, N.; Hiyama, T. J. Am. Chem. Soc. 2010, 132, 13666-13668
16. Enhancement of enantioselectivity by alcohols in an asymmetric hydrogenation reaction: Ito, J.-I.; Teshima, T.; Nishiyama, H. Chem. Commun. 2012, 48, 1105-1107
17. Use of Zn in a Hiyama reaction: Minami, Y.; Shiraishi, Y.; Yamada, K.; Hiyama, T. J. Am. Chem. Soc. 2012, 134, 6124-6127
18. For further practical issues, see Anderson, N. G. Optimizing Catalytic Reactions. In Practical Process Research and Development: A Guide For Organic Chemists, 2 nd ed.; Academic Press: New York, 2012.
19. Maldonado, A. G.; Rothenberg, G. Chem. Soc. Rev. 2010, 39, 1891-1902
20. Burello, E.; Rotheberg, G. Int. J. Mol. Sci. 2006, 7, 375-404
21. Burello, E.; Rothenberg, G. Adv. Synth. Catal. 2005, 347, 1969-1977
22. Burello, E.; Farrusseng, D.; Rothenberg, G. Adv. Synth. Catal. 2004, 346, 1844-1853
23. Burello, E.; Rothenberg, G. Adv. Synth. Catal. 2003, 345, 1334-1340
24. Suzuki, A. Angew. Chem., Int. Ed. 2011, 50, 6722-6737
25. Although not always! See, for example: Denmark, S. E.; Butler, C. R. J. Am. Chem. Soc. 2008, 130, 3690-3704
26. Tolman, C. A. Chem. Rev. 1977, 77, 313-48
27. Bunten, K. A.; Chen, L.; Fernandez, A. L.; Poe, A. J. Coord. Chem. Rev. 2002, 233-234, 41-51
28. Freixa, Z.; van Leeuwen, P. W. N. M. Dalton Trans. 2003, 1890-1901
29. Table A-1, pp 408-413 in Reichardt (ref 4.).
30. Table 4.3, pp 86-87 in Anderson (ref 5.).
31. Table 1, p. 35 in Hayes, B. L. Microwave Synthesis: Chemistry at the Speed of Light; CEM Publishing: Mathews, NC, 2002.
32. Lennox, A. J. J.; Lloyd-Jones, G. C. Isr. J. Chem. 2010, 50, 664-674
33. Miyaura, N. Top. Curr. Chem. 2002, 219, 11-59
34. Carlson, R.; Carlson, J. E. Design and Optimization in Organic Synthesis, 2 nd ed.; Data Handling in Science and Technology; Elsevier: Amsterdam, 2005; Vol. 24.
35. Owen, M. R.; Luscombe, C.; Lai, L.-W.; Godbert, S.; Crookes, D. L.; Emiabata-Smith, D. Org. Process Res. Dev. 2001, 5, 308-323
36. Lendrem, D.; Owen, M.; Godbert, S. Org. Process Res. Dev. 2001, 5, 324-327
37. Roberge, D. M. Org. Process Res. Dev. 2004, 8, 1049-1053
38. Gozálvez, J. M.; García-Díaz, J. C. J. Chem. Educ. 2006, 83, 647-650
39. Subra, P.; Jestin, P. Ind. Eng. Chem. Res. 2000, 39, 4178-4184 (solvents)
40. Martínez, B.; Rincón, F.; Ibáñez, M. V. J. Agric. Food Chem. 2000, 48, 2097-2100
41. Gooding, O. W.; Vo, L.; Bhattacharyya, S.; Labadie, J. W. J. Comb. Chem. 2002, 4, 576-583
42. Gooding, O. W. Curr. Opin. Chem. Biol. 2004, 8, 297-304
43. Muthukumar, M.; Sargunamani, D.; Selvakumar, N.; Rao, J. V. Dyes Pigm. 2004, 63, 127-134
44. Sjövall, S.; Hansen, L.; Granquist, B. Org. Process Res. Dev. 2004, 8, 802-807 (formulation)
45. Guo, Y.; Srinivasan, S.; Gaiki, S. Chromatographia 2007, 66, 223-229
46. Prakasham, R. S.; Rao, C. S; Rao, R. S.; Lakshmi, G. S.; Sarma, P. N. J. Appl. Microbiol. 2007, 102, 1382-1391
47. Oberg, A. L.; Vitek, O. J. Proteome Res. 2009, 8, 2144-2156 (mass spectrometry)
48. Gruendling, T.; Guilhaus, M.; Barner-Kowollik, C. Macromol. Rapid Commun. 2009, 30, 589-597
49. Liu, B.; Zhang, Y. Environ. Sci. Technol. 2011, 45, 3504-3510 (geochemistry)
50. Casciato, M. J.; Kim, S.; Lu, J. C.; Hess, D. W.; Grover, M. A. Ind. Eng. Chem. Res. 2012, 51, 4363-4370 (nanomaterials)
51. Carlson, R.; Carlson, J. E. Org. Process Res. Dev. 2005, 9, 680-689
52. Carlson, R.; Lundstedt, T.; Albano, C. Acta Chem. Scand., Ser. B 1985, 39, 79-91
53. Carlson, R.; Lundstedt, T.; Nordahl, Å.; Prochazka, M. Acta Chem. Scand., Ser. B 1986, 40, 522-533
54. Carlson, R.; Prochazka, M. P.; Lundstedt, T. Acta Chem. Scand., Ser. B 1988, 42, 157-165
55. Jover, J.; Fey, N.; Harvey, J. N.; Lloyd-Jones, G. C.; Orpen, A. G.; Owen-Smith, G. J. J.; Murray, P.; Hose, D. R. J.; Osborne, R.; Purdie, M. Organometallics 2010, 29, 6245-6258
56. Jover, J.; Fey, N.; Harvey, J. N.; Lloyd-Jones, G. C.; Orpen, A. G.; Owen-Smith, G. J. J.; Murray, P.; Hose, D. R. J.; Osborne, R.; Purdie, M. Organometallics 2012, 31, 5302-5306
57. Fey, N.; Haddow, M. F.; Harvey, J. N.; McMullin, C. L.; Orpen, A. G. Dalton Trans. 2009, 8183-8196
58. Moseley, J. D.; Murray, P. M.; Turp, E. R.; Tyler, S. N. G.; Burn, R. T. Tetrahedron 2012, 68, 6010-6017