-
1
-
-
0032476391
-
Elastoplastic finite element analysis of metal deformation using polycrystal constitutive models
-
10.1016/S0045-7825(98)00034-6 0045-7825
-
Marin E and Dawson P R 1998 Elastoplastic finite element analysis of metal deformation using polycrystal constitutive models Comput. Methods Appl. Mech. Eng. 165 1-21
-
(1998)
Comput. Methods Appl. Mech. Eng.
, vol.165
, pp. 1-21
-
-
Marin, E.1
Dawson, P.R.2
-
2
-
-
0032476428
-
On modeling the elasto-viscoplastic response of metals using polycrystal plasticity
-
10.1016/S0045-7825(98)00033-4 0045-7825
-
Marin E and Dawson P R 1998 On modeling the elasto-viscoplastic response of metals using polycrystal plasticity Comput. Methods Appl. Mech. Eng. 165 23-41
-
(1998)
Comput. Methods Appl. Mech. Eng.
, vol.165
, pp. 23-41
-
-
Marin, E.1
Dawson, P.R.2
-
3
-
-
22144443198
-
Crystal level continuum modelling of phase transformations: The α ↔ ε transformation in iron
-
DOI 10.1088/0965-0393/13/5/006, PII S0965039305885766
-
Barton N R, Benson D J and Becker R 2005 Crystal level continuum modeling of phase transformations: the α ↔ ε transformation in iron Modelling Simul. Mater. Sci. Eng. 13 707-31 (Pubitemid 40970548)
-
(2005)
Modelling and Simulation in Materials Science and Engineering
, vol.13
, Issue.5
, pp. 707-731
-
-
Barton, N.R.1
Benson, D.J.2
Becker, R.3
-
5
-
-
35748966431
-
Embedded polycrystal plasticity and adaptive sampling
-
DOI 10.1016/j.ijplas.2007.03.004, PII S0749641907000423
-
Barton N R, Knap J, Arsenlis A, Becker R, Hornung R D and Jefferson D R 2008 Embedded polycrystal plasticity and adaptive sampling Int. J. Plast. 24 242-66 (Pubitemid 350051695)
-
(2008)
International Journal of Plasticity
, vol.24
, Issue.2
, pp. 242-266
-
-
Barton, N.R.1
Knap, J.2
Arsenlis, A.3
Becker, R.4
Hornung, R.D.5
Jefferson, D.R.6
-
6
-
-
80052088713
-
Modeling large-strain deformation behaviour and neighborhood effects during hot working of a coarse-grain nickel-base superalloy
-
Turner T J and Semiatin S L 2011 Modeling large-strain deformation behaviour and neighborhood effects during hot working of a coarse-grain nickel-base superalloy Modelling Simul. Materi. Sci. Eng. 19 065010
-
(2011)
Modelling Simul. Materi. Sci. Eng.
, vol.19
, pp. 065010
-
-
Turner, T.J.1
Semiatin, S.L.2
-
7
-
-
0026172254
-
Analysis of texture evolution in channel die compression - I. Effects of grain interaction
-
DOI 10.1016/0956-7151(91)90209-J
-
Becker R 1991 Analysis of texture evolution in channel die compression: I. Effects of grain interaction Acta Metall. Mater. 39 1211-30 (Pubitemid 21649795)
-
(1991)
Acta metallurgica et materialia
, vol.39
, Issue.6
, pp. 1211-1230
-
-
Becker, R.1
-
8
-
-
0030109901
-
Direct observation of orientation change by channel die compression of polycrystalline aluminum - Use of a split sample
-
DOI 10.1016/1359-6454(95)00186-7
-
Panchanadeeswaran S, Doherty R D and Becker R 1996 Direct observation of orientation change by channel die compression of polycrystalline aluminum - use of a split sample Acta Mater. 44 1233-62 (Pubitemid 126339413)
-
(1996)
Acta Materialia
, vol.44
, Issue.3
, pp. 1233-1262
-
-
Panchanadeeswaran, S.1
Doherty, R.D.2
Becker, R.3
-
9
-
-
0029344308
-
Effects of grain interactions on deformation and local texture in polycrystals
-
10.1016/0956-7151(94)00460-Y 0956-7151
-
Becker R and Panchanadeeswaran S 1995 Effects of grain interactions on deformation and local texture in polycrystals Acta Metall. Mater. 43 2701-19
-
(1995)
Acta Metall. Mater.
, vol.43
, pp. 2701-2719
-
-
Becker, R.1
Panchanadeeswaran, S.2
-
10
-
-
0034744152
-
Evolution of grain-scale microstructure during large strain simple compression of polycrystalline aluminum with quasi-columnar grains: OIM measurements and numerical simulations
-
DOI 10.1016/S0749-6419(00)00072-3, PII S0749641900000723
-
Bhattacharyya A, El-Danaf E, Kalidindi S R and Doherty R D 2001 Evolution of grain-scale microstructure during large strain simple compression of polycrystalline aluminum with quasi-columnar grains: OIM measurements and numerical simulations Int. J. Plast. 17 861-83 (Pubitemid 32447408)
-
(2001)
International Journal of Plasticity
, vol.17
, Issue.6
, pp. 861-883
-
-
Bhattacharyya, A.1
El-Danaf, E.2
Kalidindi, S.R.3
Doherty, R.D.4
-
11
-
-
0033885990
-
Plastic heterogeneities of a copper multicrystal deformed in uniaxial tension: experimental study and finite element simulations
-
DOI 10.1016/S1359-6454(99)00408-5
-
Delaire F, Raphanel J L and Rey C 2000 Plastic heterogeneities of a copper multicrystal deformed in uniaxial tension: experimental study and finite element simulations Acta Mater. 48 1075-87 (Pubitemid 30573951)
-
(2000)
Acta Materialia
, vol.48
, Issue.5
, pp. 1075-1087
-
-
Delaire, F.1
Raphanel, J.L.2
Rey, C.3
-
12
-
-
0035834199
-
Micromechanical and macromechanical effects in grain scale polycrystal plasticity experimentation and simulation
-
DOI 10.1016/S1359-6454(01)00242-7, PII S1359645401002427
-
Raabe D, Sachtleber M, Zhao Z, Roters F and Zaefferer S 2001 Micromechancial and macromechanical effects in grain scale polycrystal plasticity experimentation and simulation Acta Mater. 49 3433-41 (Pubitemid 32842094)
-
(2001)
Acta Materialia
, vol.49
, Issue.17
, pp. 3433-3441
-
-
Raabe, D.1
Sachtleber, M.2
Zhao, Z.3
Roters, F.4
Zaefferer, S.5
-
13
-
-
0141975307
-
A procedure for identifying the plastic behavior of single crystals from the local response of polycrystal
-
10.1016/S1359-6454(03)00413-0 1359-6454
-
Hoc T, Crepin J, Gelebart L and Zaoui A 2003 A procedure for identifying the plastic behavior of single crystals from the local response of polycrystal Acta Mater. 51 5477-88
-
(2003)
Acta Mater.
, vol.51
, pp. 5477-5488
-
-
Hoc, T.1
Crepin, J.2
Gelebart, L.3
Zaoui, A.4
-
14
-
-
0000187953
-
Modeling the mechanical behavior of a multicrystalline zinc coating on a hot-dip galvanized steel sheet
-
10.1016/S0927-0256(00)00155-5 0927-0256
-
Parisot R, Forest S, Gourgues A-F, Pineau A and Mareuse D 2000 Modeling the mechanical behavior of a multicrystalline zinc coating on a hot-dip galvanized steel sheet Comput. Mater. Sci. 19 189-204
-
(2000)
Comput. Mater. Sci.
, vol.19
, pp. 189-204
-
-
Parisot, R.1
Forest, S.2
Gourgues, A.-F.3
Pineau, A.4
Mareuse, D.5
-
15
-
-
67849135594
-
A combined experimental and simulation study to examine lateral constraint effects on microcompression of single-slip oriented single crystals
-
10.1016/j.actamat.2009.06.029 1359-6454
-
Shade P A, Wheeler R, Choi Y S and Uchic M 2009 A combined experimental and simulation study to examine lateral constraint effects on microcompression of single-slip oriented single crystals Acta Mater. 57 4580-7
-
(2009)
Acta Mater.
, vol.57
, pp. 4580-4587
-
-
Shade, P.A.1
Wheeler, R.2
Choi, Y.S.3
Uchic, M.4
-
16
-
-
29844443118
-
Application of micro-sample testing to study fundamental aspects of plastic flow
-
DOI 10.1016/j.scriptamat.2005.11.016, PII S1359646205007360, Viewpoint Set no. 39: Statistical Mechanics and Coarse Graning of Dislocation Behavior for Continuum Plasticity
-
Uchic M D, Wheeler R and Shade P A 2006 Application of micro-sample testing to study fundamental aspects of plastic flow Scr. Mater. 54 759-64 (Pubitemid 43038787)
-
(2006)
Scripta Materialia
, vol.54
, Issue.5
, pp. 759-764
-
-
Uchic, M.D.1
Dimiduk, D.M.2
Wheeler, R.3
Shade, P.A.4
Fraser, H.L.5
-
17
-
-
84857657291
-
Insights gained through image analysis during in-situ micromechanical experiments
-
10.1007/s11837-011-0224-x 1047-4838
-
Wheeler R, Shade P A and Uchic M D 2012 Insights gained through image analysis during in-situ micromechanical experiments JOM 64 58-65
-
(2012)
JOM
, vol.64
, pp. 58-65
-
-
Wheeler, R.1
Shade, P.A.2
Uchic, M.D.3
-
18
-
-
84862152693
-
Stencil mask methodology for the parallelized production of microscale mechanical test samples
-
10.1063/1.4720944 0034-6748 053903
-
Shade P A, Kim S L, Wheeler R and Uchic M D 2012 Stencil mask methodology for the parallelized production of microscale mechanical test samples Rev. Sci. Instrum. 83 053903
-
(2012)
Rev. Sci. Instrum.
, vol.83
-
-
Shade, P.A.1
Kim, S.L.2
Wheeler, R.3
Uchic, M.D.4
-
20
-
-
33751206544
-
3D reconstruction and characterization of polycrystalline microstructures using a FIB-SEM system
-
DOI 10.1016/j.matchar.2006.01.019, PII S1044580306000623
-
Groeber M A, Haley B K, Uchic M D, Dimiduk D M and Ghosh S 2006 3D reconstruction and characterization of polycrystalline microstructures using a FIB-SEM system Mater. Charact. 57 259-73 (Pubitemid 44781083)
-
(2006)
Materials Characterization
, vol.57
, Issue.4-5
, pp. 259-273
-
-
Groeber, M.A.1
Haley, B.K.2
Uchic, M.D.3
Dimiduk, D.M.4
Ghosh, S.5
-
21
-
-
33646184563
-
3D microstructural characterization of nickel superalloys via serial-sectioning using a dual beam FIB-SEM
-
10.1016/j.scriptamat.2006.02.039 1359-6462
-
Uchic M D, Groeber M A, Dimiduk D M and Simmons J P 2006 3D microstructural characterization of nickel superalloys via serial-sectioning using a dual beam FIB-SEM Scr. Mater. 55 23-8
-
(2006)
Scr. Mater.
, vol.55
, pp. 23-28
-
-
Uchic, M.D.1
Groeber, M.A.2
Dimiduk, D.M.3
Simmons, J.P.4
-
22
-
-
33644983239
-
Three-dimensional investigation of the texture and microstructure below a nanoindent in a Cu single crystal using 3D EBSD and crystal plasticity finite element simulations
-
10.1016/j.actamat.2005.12.014 1359-6454
-
Zaafarani N, Raabe D, Singh R N, Roters F and Zaefferer S 2006 Three-dimensional investigation of the texture and microstructure below a nanoindent in a Cu single crystal using 3D EBSD and crystal plasticity finite element simulations Acta Mater. 54 1863-76
-
(2006)
Acta Mater.
, vol.54
, pp. 1863-1876
-
-
Zaafarani, N.1
Raabe, D.2
Singh, R.N.3
Roters, F.4
Zaefferer, S.5
-
23
-
-
36048948564
-
3D polycrystalline microstructure reconstruction from FIB generated serial sections for FE analysis
-
DOI 10.1016/j.commatsci.2007.04.007, PII S0927025607000997
-
Bhandari Y, Sarkar S, Groeber M, Uchic M D, Dimiduk D M and Ghosh S 2007 3D polycrystalline microstructure reconstruction from FIB generated serial sections for FE analysis Comput. Mater. Sci. 41 222-35 (Pubitemid 350081110)
-
(2007)
Computational Materials Science
, vol.41
, Issue.2
, pp. 222-235
-
-
Bhandari, Y.1
Sarkar, S.2
Groeber, M.3
Uchic, M.D.4
Dimiduk, D.M.5
Ghosh, S.6
-
24
-
-
39949085250
-
CAD-based reconstruction of 3D polycrystalline alloy microstructures from FIB generated serial sections
-
10.1016/j.cad.2007.11.003 0010-4485
-
Ghosh S, Bhandari Y and Groeber M 2008 CAD-based reconstruction of 3D polycrystalline alloy microstructures from FIB generated serial sections Comput.-Aided Des. 40 293-310
-
(2008)
Comput.-Aided Des.
, vol.40
, pp. 293-310
-
-
Ghosh, S.1
Bhandari, Y.2
Groeber, M.3
-
27
-
-
0000649503
-
Plastic strain in metals
-
0020-2975
-
Taylor G I 1938 Plastic strain in metals J. Inst. Met 62 307-24
-
(1938)
J. Inst. Met
, vol.62
, pp. 307-324
-
-
Taylor, G.I.1
-
28
-
-
0000229884
-
The relationship between stress and strain for homogeneous deformation
-
0020-2975
-
Voce E 1948 The relationship between stress and strain for homogeneous deformation J. Inst. Met. 74 537-62
-
(1948)
J. Inst. Met.
, vol.74
, pp. 537-562
-
-
Voce, E.1
-
29
-
-
0016884466
-
Laws for work-hardening and low-temperature creep
-
10.1115/1.3443340 0094-4289
-
Kocks U F 1976 Laws for work-hardening and low-temperature creep ASME J. Eng. Mater. Technol. 98 76-85
-
(1976)
ASME J. Eng. Mater. Technol.
, vol.98
, pp. 76-85
-
-
Kocks, U.F.1
-
30
-
-
0024774103
-
On modeling the development of crystallographic texture in bulk forming processes
-
10.1016/0749-6419(89)90020-X 0749-6419
-
Mathur K and Dawson P R 1989 On modeling the development of crystallographic texture in bulk forming processes Inter. J. Plast. 5 67-94
-
(1989)
Inter. J. Plast.
, vol.5
, pp. 67-94
-
-
Mathur, K.1
Dawson, P.R.2
-
31
-
-
0020140945
-
Analysis of nonuniform and localized deformation in ductile single crystals
-
DOI 10.1016/0001-6160(82)90005-0
-
Peirce D, Asaro R J and Needleman A 1982 Overview no. 21 An analysis of non-uniform and localized deformation in ductile single crystals Acta Metall. 30 1087-119 (Pubitemid 12520837)
-
(1982)
Acta Metallurgica
, vol.30
, Issue.6
, pp. 1087-1119
-
-
Peirce, D.1
Asaro, R.J.2
Needleman, A.3
-
32
-
-
0020876453
-
Material rate dependence and localized deformation in crystalline solids
-
DOI 10.1016/0001-6160(83)90014-7
-
Peirce D, Asaro R J and Needleman A 1983 Material rate dependence and localized deformation in crystalline solids Acta Metall. 31 1951-76 (Pubitemid 14505740)
-
(1983)
Acta Metallurgica
, vol.31
, Issue.12
, pp. 1951-1976
-
-
Peirce, D.1
Asaro, R.J.2
Needleman, A.3
-
34
-
-
0022083554
-
Texture development and strain hardening in rate dependent polycrystals
-
DOI 10.1016/0001-6160(85)90188-9
-
Asaro R J and Needleman A 1985 Overview no. 42 Texture development and strain hardening in rate dependent polycrystals Acta Metall. 33 923-53 (Pubitemid 15565280)
-
(1985)
Acta Metallurgica
, vol.33
, Issue.6
, pp. 923-953
-
-
Asaro, R.J.1
Needleman, A.2
-
35
-
-
0001059511
-
The distortion of an aluminum crystal during a tensile test
-
10.1098/rspa.1923.0023 1364-5021
-
Taylor G I and Elam C F 1923 The distortion of an aluminum crystal during a tensile test Proc. R. Soc. Lond. A 102 643-667
-
(1923)
Proc. R. Soc. Lond. A
, vol.102
, pp. 643-667
-
-
Taylor, G.I.1
Elam, C.F.2
-
36
-
-
0343300386
-
-
Technical Report UCRL-MA-152204
-
Anderson A, Cooper R, Neely R, Nichols A, Sharp R and Wallin B 2003 Users manual for ALE3D - an arbitrary Lagrange/Eulerian 3D code system Technical Report UCRL-MA-152204
-
(2003)
Users Manual for ALE3D - An Arbitrary Lagrange/Eulerian 3D Code System
-
-
Anderson, A.1
Cooper, R.2
Neely, R.3
Nichols, A.4
Sharp, R.5
Wallin, B.6
-
38
-
-
33846046905
-
Forward modeling method for microstructure reconstruction using x-ray diffraction microscopy: Single-crystal verification
-
DOI 10.1063/1.2400017
-
Suter R M, Hennessy D, Xiao C and Lienert U 2006 Forward Modeling method for microstructure reconstruction using x-ray diffraction microscopy: single-crystal verification Rev. Sci. Instrum. 77 123905 (Pubitemid 46058415)
-
(2006)
Review of Scientific Instruments
, vol.77
, Issue.12
, pp. 123905
-
-
Suter, R.M.1
Hennessy, D.2
Xiao, C.3
Lienert, U.4
-
39
-
-
80051526799
-
High-energy diffraction microscopy at the advanced photon source
-
10.1007/s11837-011-0116-0 1047-4838
-
Lienert U et al 2011 High-energy diffraction microscopy at the advanced photon source: JOM 63 70-77
-
(2011)
JOM
, vol.63
, pp. 70-77
-
-
Lienert, U.1
-
40
-
-
69249159422
-
In situ single-grain peak profile measurements on Ti-7Al during tensile deformation
-
10.1016/j.msea.2009.06.047 0921-5093
-
Leinert U, Brandes M C, Bernier J V, Weiss J, Shastri S, Mills M J and Miller M P 2009 In situ single-grain peak profile measurements on Ti-7Al during tensile deformation Mater. Sci. Eng. A 524 46-54
-
(2009)
Mater. Sci. Eng. A
, vol.524
, pp. 46-54
-
-
Leinert, U.1
Brandes, M.C.2
Bernier, J.V.3
Weiss, J.4
Shastri, S.5
Mills, M.J.6
Miller, M.P.7
-
42
-
-
33750719440
-
Distances for the solutions of stress tensor inversion in relation to misfit angles that accompany the solutions
-
DOI 10.1111/j.1365-246X.2006.03188.x
-
Yamaji A and Sato K 2006 Distances for the solution of stress tensor inversion in relation to misfit angles that accompany the solutions Geophys. J. Int. 167 933-42 (Pubitemid 44697449)
-
(2006)
Geophysical Journal International
, vol.167
, Issue.2
, pp. 933-942
-
-
Yamaji, A.1
Sato, K.2
-
43
-
-
70350621211
-
Analyzing the orientation dependence of stresses in polycrystals using vertices of the single crystal yield surface and crystallographic fibers of orientation space
-
10.1016/j.jmps.2009.08.007 0022-5096
-
Ritz H, Dawson P R and Marin T 2010 Analyzing the orientation dependence of stresses in polycrystals using vertices of the single crystal yield surface and crystallographic fibers of orientation space J. Mech. Phys. Solids 58 54-72
-
(2010)
J. Mech. Phys. Solids
, vol.58
, pp. 54-72
-
-
Ritz, H.1
Dawson, P.R.2
Marin, T.3
|