Modeling large-strain deformation behavior and neighborhood effects during hot working of a coarse-grain nickel-base superalloy

Modelling and Simulation in Materials Science and Engineering

Volumn 19, Issue 6, 2011, Pages

  Turner, T J ^a   Semiatin, S L ^a  

^a AIR FORCE RESEARCH LABORATORY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

CRYSTAL PLASTICITY; DEFORMATION BEHAVIOR; DEFORMATION HETEROGENEITIES; DEFORMATION PROCESSING; HETEROGENEOUS DEFORMATION; LARGE STRAINS; MICROSTRUCTURE EVOLUTIONS; MISORIENTATIONS; NICKEL BASE SUPERALLOY; PRINCIPAL FACTORS; SIMULATION PREDICTION; SIMULATION RESULT; UNDEFORMED MATERIALS; UNIAXIAL COMPRESSION TESTS;

COMPRESSION TESTING; CRYSTAL MICROSTRUCTURE; FINITE ELEMENT METHOD; HOT WORKING; INGOTS;

DEFORMATION;

EID: 80052088713     PISSN: 09650393     EISSN: 1361651X     Source Type: Journal    
DOI: 10.1088/0965-0393/19/6/065010     Document Type: Article

References (70)

1. Semiatin S L, Fagin P N, Glavicic M G and Raabe D 2004 Deformation behavior of waspaloy at hot-working temperatures Scr. Mater. 50 625-9
2. Forbes Jones R M and Jackman L A 1999 The structural evolution of superalloy ingots during hot working JOM 51 27-31
3. Semiatin S L, Weaver D S, Fagin P N, Glavicic M G, Goetz R L, Frey N D, Kramb R C and Antony M M 2004 Deformation and recrystallization behavior during hot working of a coarse-grain, nickel-base superalloy ingot material Metall. Mater. Trans. A 35 679-93
4. Weaver D S and Semiatin S L 2007 Recrystallization and grain-growth behavior of a nickel-base superalloy during multi-hit deformation Scr. Mater. 57 1044-7 (Pubitemid 47381505)
5. Sachtleber M, Zhao Z and Raabe D 2002 Experimental investigation of plastic grain interaction Mater. Sci. Eng. A 336 81-7 (Pubitemid 35235653)
6. Turner T J and Miller M P 2007 Modeling the influence of material structure on deformation induced surface roughening in AA7050 thick plate ASME J. Eng. Mater. Technol. 129 367-79 (Pubitemid 47229439)
7. Zhao Z, Ramesh M, Raabe D, Cuitino A M and Radovitzky R 2008 Investigation of three-dimensional aspects of grain-scale plastic surface deformation of an aluminum oligocrystal Int. J. Plast. 24 2278-97
8. Dawson P R, Mika D P and Barton N R 2002 Finite element modeling of lattice misorientations in aluminum polycrystals Scr. Mater. 47 713-17
9. Mika D P and Dawson P R 1998 Effects of grain interaction on deformation in polycrystals Mater. Sci. Eng. A 257 62-76 (Pubitemid 128383944)
10. Mika D P and Dawson P R 1999 Polycrystal plasticity modeling of intracrystalline boundary texture Acta Mater. 47 1355-69
11. Raabe D, Sachtleber M, Zhao Z, Roters F and Zaefferer S 2001 Micromechanical and macromechanical effects in grain scale polycrystal plasticity experimentation and simulation Acta Mater. 49 3433-41 (Pubitemid 32842094)
12. Raabe D, Zhao Z and Mao W 2002 On the dependence of in-grain subdivision and deformation texture of aluminum on grain interaction Acta Mater. 50 4379-94
13. Kanjarla A K, Van Houtte P and Delannay L 2010 Assessment of plastic heterogeneity in grain interaction models using crystal plasticity finite element method Int. J. Plast. 26 1220-33
14. Sarma G, Radhakrishnan B and Zacharia T 2001 Mesoscale simulations of microstructure and texture evolution during deformation of columnar grains Microstructure Modeling and Prediction during Thermomechanical Processing ed R Srinivasan et al (Warrendale, PA: TMS) pp 37-46
15. Delannay L, Melchior M A, Kanjarla A K, Van Houtte P and Signorelli J W 2008 CPFEM investigation of the effect of grain shape on the planar anisotropy and the shear banding of textured metal sheets Proc. ICOTOM 15 vol S14-5 ed A D Rolett (Pittsburgh, PA: Carnegie Mellon University) pp 1-12
16. Delaire F, Raphanel J L and Rey C 2000 Plastic heterogeneities of a copper multicrystal deformed in uniaxial tension: experimental study and finite element simulations Acta Mater. 48 1075-87 (Pubitemid 30573951)
17. Heripre E, Dexet M, Crepin J, Gelebart L, Roos A, Bornert M and Caldemaison D 2007 Coupling between experimental measurements and polycrystal finite element calculations for micromechanical study of metallic materials Int. J. Plast. 23 1512-39 (Pubitemid 46777250)
18. Becker R 1991 Analysis of texture evolution in channel die compression: I. Effects of grain interaction Acta Metall. Mater. 39 1211-30 (Pubitemid 21649795)
19. Becker R and Panchanadeeswaran S 1995 Effects of grain interactions on deformation and local texture in polycrystals Acta Metall. Mater. 43 2701-19
20. Panchanadeeswaran S, Doherty R D and Becker R 1996 Direct observation of orientation change by channel die compression of polycrystalline aluminum - use of a split sample Acta Mater. 44 1233-62 (Pubitemid 126339413)
21. Bhattacharyya A, El-Danaf E, Kalidindi S R and Doherty R D 2001 Evolution of grain-scale microstructure during large strain simple compression of polycrystalline aluminum with quasi-columnar grains: OIM measurements and numerical simulations Int. J. Plast. 17 861-83 (Pubitemid 32447408)
22. Poulsen H F, Margulies L, Schmidt S and Winther G 2003 Lattice rotations of individual bulk grains: I. 3D x-ray characterization Acta Mater. 51 3821-30
23. Winther G, Margulies L, Schmidt S and Poulsen H F 2003 Lattice rotations of individual bulk grains: II. Correlation with initial orientation and model comparison Acta Mater. 52 2863-72
24. Quey R, Piot D and Driver J H 2010 Microtexture tracking in hot-deformed polycrystalline aluminium: experimental results Acta Mater. 58 1629-42
25. Quey R, Piot D and Driver J H 2010 Microtexture tracking in hot-deformed polycrystalline aluminium: comparison with simulations Acta Mater. 58 2271-81
26. Humphreys F J 1979 Local lattice rotations at second phase particles in deformed metals Acta Metall. 27 1801-14 (Pubitemid 10442280)
27. Humphreys F J and Ardakani M G 1994 The Deformation of particle-containing aluminum single crystals Acta Metal. Mater. 42 749-61
28. Humphreys J and Bate P 2003 Gradient plasticity around deformation structures Scr. Mater. 48 173-8 (Pubitemid 35412282)
29. Muzyka D R 1971 Controlling microstructures and properties of superalloys via use of precipitated phases Met. Eng. Q 11 12-20
30. Venables J A and Harland C J 1973 Electron back scattering patterns - a new technique for obtaining crystallographic information in the scanning electron microscope Phil. Mag. 27 1193-200
31. Dingley D J 1984 Diffraction from sub-micron areas using electron backscattering in a scanning electron microscope Scanning Electron Microsc. 2 569-75 (Pubitemid 14667198)
32. Weiland H 1994 Microtexture determination and its application to materials science JOM 46 37-41
33. Barton N R and Dawson P R 2001 A methodology for determining average lattice orientation and its application to the characterization of grain substructure Metall. Mater. Trans. A 32 1967-75 (Pubitemid 32813708)
34. Marin E and Dawson P R 1998 Elastoplastic finite element analysis of metal deformation using polycrystal constitutive models Comput. Methods Appl. Mech. Eng 165 1-21
35. Marin E and Dawson P R 1998 On modeling the elasto-viscoplastic response of metals using polycrystal plasticity Comput. Methods Appl. Mech. Eng. 165 23-41
36. Barton N R, Knap J, Arsenlis A, Becker R, Hornung R D and Jefferson D R 2008 Embedded polycrystal plasticity and adaptive sampling Int. J. Plast. 24 242-66 (Pubitemid 350051695)
37. Barton N R, Benson D J and Becker R 2004 Crystal level simulations using Eulerian finite element methods Materials Processing and Design: Modeling, Simulation and Applications, NUMIFORM 2004 712 (College Park, MD: AIP) 1624-9
38. Barton N R, Benson D J and Becker R 2005 Crystal level continuum modelling of phase transformations: the a↔e transformation in iron Modelling Simul. Mater. Sci. Eng. 13 707-31 (Pubitemid 40970548)
39. Barton N R, Reaugh J and Winter N 2008 Crystal level modeling of energetic materials Proc. 14th Int. Symp. on Plasticity (Kailua-Kona, Hawaii) (Fulton, MD: Neat Press)
40. Taylor G I 1938 Plastic Strain in Metals J. Inst. Met. 62 307-24
41. Kocks U F 1976 Laws for work-hardening and low-temperature creep ASME J. Eng. Mater. Technol. 98 76-85
42. Voce E 1948 The relationship between stress and strain for homogeneous deformation J. Inst. Met. 74 537-62
43. Mathur K and Dawson P R 1989 On modeling the development of crystallographic texture in bulk forming processes Int. J. Plast. 5 67-94
44. Peirce D, Asaro R J and Needleman A 1982 Overview no. 21 An analysis of nonuniform and localized deformation in ductile single crystals Acta Metal. 30 1087-119 (Pubitemid 12520837)
45. Peirce D, Asaro R J and Needleman A 1983 Material rate dependence and localized deformation in crystalline solids Acta Metal. 31 1951-76 (Pubitemid 14505740)
46. Needleman A, Asaro R J, Lemonds J and Peirce D 1985 Finite element analysis of crystalline solids Comput. Methods Appl. Mech. Eng. 52 689-708
47. Asaro R J and Needleman A 1985 Overview no. 42 Texture development and strain hardening in rate dependent polycrystals Acta Metal. 33 923-53 (Pubitemid 15565280)
48. Taylor G I and Elam C F 1923 The distortion of an aluminum crystal during a tensile test Proc. R. Soc. Lond. A 102 643-67
49. Taylor G I 1938 Analysis of plastic strain in a cubic crystal Stephen Timoshenko 60th Anniversary Volume (New York: MacMillan) pp 218-24
50. Harren S V and Asaro R J 1989 Nonuniform deformations in polycrystals and aspects of the validity of the Taylor model J. Mech. Phys. Solids 37 191-232
51. Sarma G and Dawson P R 1996 Effects of interactions among crystals on inhomogeneous deformation of polycrystals Acta. Mater 44 1937-53 (Pubitemid 126329149)
52. Sarma G B and Dawson P R 1996 Texture predictions using a polycrystal plasticity model incorporating neighbor interactions Int. J. Plast. 12 1023-54 (Pubitemid 126403701)
53. Miller M P and Dawson P R 1997 Influence of slip system hardening assumptions on modeling stress dependence of work hardening J. Mech. Phys. Solids 45 1781-804
54. Becker R 1998 Effects of strain localization on surface roughening during sheet forming Acta Mater. 56 1385-401 (Pubitemid 128387891)
55. Turner T J, Miller M P and Barton N R 2002 The Influence of crystallographic texture and slip system strength on deformation induced shape changes in AA 7050 thick plate Mech. Mater. 34 605-25 (Pubitemid 35039839)
56. Buchheit T E, Wellman G W and Battaile C C 2005 Investigating the limits of polycrystal plasticity modeling Int. J. Plast. 21 221-49
57. Kocks U F 1964 Latent hardening and secondary slip in aluminum and silver Trans. Metall. Soc. AIME 230 1160-7
58. Ramaswami B, Kocks U F and Chalmers B 1965 Latent hardening in silver and an Ag-Au alloy Trans. Metall. Soc. AIME 233 927-31
59. Kocks U F and Brown T J 1966 Latent hardening in aluminum Acta Metall. 14 87-98
60. Jackson P J and Basinski Z S 1967 Latent hardening and the flow stress in copper single crystals Can. J. Phys. 45 247-72
61. Anderson A, Cooper R, Neely R, Nichols A, Sharp R and Wallin B 2003 Users manual for ALE3D - an arbitrary Lagrange/Eulerian 3D code system Technical Report UCRL-MA-152204 Lawrence Livermore National Laboratory
62. Barton N R and Dawson P R 2001 On the spatial arrangement of lattice orientation in hot-rolled multiphase titanium Modelling Simul. Mater. Sci. Eng 9 433-62
63. Chin G Y and Mammel W L 1969 Generalization and equivalence of the minimum work (Taylor) and maximum work (Bishop-Hill) principles for crystal plasticity Trans. TMS-AIME 245 1211-4
64. Hosford W F 1993 The Mechanics of Crystals and Textured Polycrystals (New York: Oxford University Press)
65. Kocks U F, Tome C N and Wenk H R 1998 Texture and Anisotropy (Cambridge: Cambridge University Press)
66. Backofen W A 1972 Deformation Processing (Reading MA: Addison-Wesley)
67. Dawson P R and Marin E B 1998 Computational mechanics for metal deformation processes using polycrystal plasticity Adv. Appl. Mech. 34 77-169
68. Cheong K and Busso E 2004 Discrete dislocation density modeling of single phase FCC polycrystal aggregates Acta Mater. 52 5665-75
69. Cheong K and Busso E 2006 Effects of lattice misorientatoins on strain heterogeneities in FCC polycrystals J. Mech. Phys. Solids 54 671-89 (Pubitemid 43121433)
70. Leinert U, Brandes M C, Bernier J V, Weiss J, Shastri S D, Mills M J and Miller M P 2009 In Situ single-grain peak profile measurements on Ti-7Al during tensile deformation Mater. Sci. Eng. A 524 46-54