-
1
-
-
71849120381
-
Material characterization and residual stresses simulation during the manufacturing process of epoxy matrix composites
-
Abou Msallem Y., Jacquemin F., Boyard N., Poitou A., Delaunay D., Chatel S. Material characterization and residual stresses simulation during the manufacturing process of epoxy matrix composites. Compos Part A: Appl Sci Manuf 2010, 41(1):108-115.
-
(2010)
Compos Part A: Appl Sci Manuf
, vol.41
, Issue.1
, pp. 108-115
-
-
Abou Msallem, Y.1
Jacquemin, F.2
Boyard, N.3
Poitou, A.4
Delaunay, D.5
Chatel, S.6
-
2
-
-
84867778609
-
Viscoelastic analysis of residual stress in thermosetting resins introduced during curing process
-
Allison IM, editor. 11th International conference on, experimental mechanics, Oxford-UK
-
Shimbo M, Yamabe M, Miyano Y. Viscoelastic analysis of residual stress in thermosetting resins introduced during curing process. In: Allison IM, editor. 11th International conference on, experimental mechanics, Oxford-UK; 1998. p. 1325-1330.
-
(1998)
, pp. 1325-1330
-
-
Shimbo M1
Yamabe, M.2
Miyano, Y.3
-
3
-
-
84872957198
-
Evolution of chemical and thermal curvatures in thermoset laminated composite plates during the fabrication process
-
Nawab Y., Jacquemin F., Casari P., Boyard N., Sobotka V. Evolution of chemical and thermal curvatures in thermoset laminated composite plates during the fabrication process. J Compos Mater 2012, 10.1177/0021998312440130.
-
(2012)
J Compos Mater
-
-
Nawab, Y.1
Jacquemin, F.2
Casari, P.3
Boyard, N.4
Sobotka, V.5
-
4
-
-
0028406423
-
A simple dilatometer for thermoset cure shrinkage and thermal expansion measurements
-
Snow A.W., Armistead J.P. A simple dilatometer for thermoset cure shrinkage and thermal expansion measurements. J Appl Polym Sci 1994, 52(3):401-411.
-
(1994)
J Appl Polym Sci
, vol.52
, Issue.3
, pp. 401-411
-
-
Snow, A.W.1
Armistead, J.P.2
-
5
-
-
0030086344
-
Volume shrinkage characteristics in the cure of low-shrink unsaturated polyester resins
-
Yan-Jyi H., Chiou-Ming L. Volume shrinkage characteristics in the cure of low-shrink unsaturated polyester resins. Polymer 1996, 37:401-412.
-
(1996)
Polymer
, vol.37
, pp. 401-412
-
-
Yan-Jyi, H.1
Chiou-Ming, L.2
-
6
-
-
0027112367
-
Development of a dilatometer and its application to low-shrink unsaturated polyester resins
-
Mark K., Lee L.J. Development of a dilatometer and its application to low-shrink unsaturated polyester resins. J Appl Polym Sci 1992, 45(1):37-50.
-
(1992)
J Appl Polym Sci
, vol.45
, Issue.1
, pp. 37-50
-
-
Mark, K.1
Lee, L.J.2
-
7
-
-
0029306054
-
Dilatometric study of low profile unsaturated polyester resins
-
Mark K., Shailesh M., Lee L.J. Dilatometric study of low profile unsaturated polyester resins. Polym Eng Sci 1995, 35(10):823-836.
-
(1995)
Polym Eng Sci
, vol.35
, Issue.10
, pp. 823-836
-
-
Mark, K.1
Shailesh, M.2
Lee, L.J.3
-
8
-
-
0034546066
-
A new method to reduce cure-induced stresses in thermoset polymer composites, Part I: Test method
-
Madhukar M.S., Genidy M.S., Russell J.D. A new method to reduce cure-induced stresses in thermoset polymer composites, Part I: Test method. J Compos Mater 2000, 34(22):1882-1904.
-
(2000)
J Compos Mater
, vol.34
, Issue.22
, pp. 1882-1904
-
-
Madhukar, M.S.1
Genidy, M.S.2
Russell, J.D.3
-
9
-
-
0242666907
-
In-situ measurement of chemical shrinkage of MY750 epoxy resin by a novel gravimetric method
-
Li C., Potter K., Wisnom M.R., Stringer G. In-situ measurement of chemical shrinkage of MY750 epoxy resin by a novel gravimetric method. Compos Sci Technol 2004, 64(1):55-64.
-
(2004)
Compos Sci Technol
, vol.64
, Issue.1
, pp. 55-64
-
-
Li, C.1
Potter, K.2
Wisnom, M.R.3
Stringer, G.4
-
10
-
-
77950861780
-
Shrinkage determination of a reactive polymer with volumetric dilatometry
-
Parlevliet P.P., Bersee H.E.N., Beukers A. Shrinkage determination of a reactive polymer with volumetric dilatometry. Polym Testing 2010, 29(4):433-439.
-
(2010)
Polym Testing
, vol.29
, Issue.4
, pp. 433-439
-
-
Parlevliet, P.P.1
Bersee, H.E.N.2
Beukers, A.3
-
11
-
-
77955430996
-
Evaluation of cure shrinkage measurement techniques for thermosetting resins
-
Shah DU, Schubel PJ. Evaluation of cure shrinkage measurement techniques for thermosetting resins. Polym Testing 2010;29(6): 629-39.
-
(2010)
Polym Testing
, vol.29
, Issue.6
, pp. 629-639
-
-
Shah, D.U.1
Schubel, P.J.2
-
12
-
-
2942532421
-
Real-time measurement of resin shrinkage during cure
-
Schoch K.F., Panackal P.A., Frank P.P. Real-time measurement of resin shrinkage during cure. Thermochim Acta 2004, 417(1):115-118.
-
(2004)
Thermochim Acta
, vol.417
, Issue.1
, pp. 115-118
-
-
Schoch, K.F.1
Panackal, P.A.2
Frank, P.P.3
-
13
-
-
77649192785
-
Measurement of (post-)curing strain development with fibre Bragg gratings
-
Parlevliet P.P., Bersee H.E.N., Beukers A. Measurement of (post-)curing strain development with fibre Bragg gratings. Polym Testing 2010, 29(3):291-301.
-
(2010)
Polym Testing
, vol.29
, Issue.3
, pp. 291-301
-
-
Parlevliet, P.P.1
Bersee, H.E.N.2
Beukers, A.3
-
14
-
-
33749531021
-
Real time monitoring of cure and gelification of a thermoset matrix
-
Antonucci V., Giordano M., Cusano A., Nasser J., Nicolais L. Real time monitoring of cure and gelification of a thermoset matrix. Compos Sci Technol 2006, 66(16):3273-3280.
-
(2006)
Compos Sci Technol
, vol.66
, Issue.16
, pp. 3273-3280
-
-
Antonucci, V.1
Giordano, M.2
Cusano, A.3
Nasser, J.4
Nicolais, L.5
-
15
-
-
45849152049
-
Monitoring of process induced strains in a single fibre composite using FBG sensor: a methodological study
-
Karalekas D., Cugnoni J., Botsis J. Monitoring of process induced strains in a single fibre composite using FBG sensor: a methodological study. Compos A Appl Sci Manuf 2008, 39(7):1118-1127.
-
(2008)
Compos A Appl Sci Manuf
, vol.39
, Issue.7
, pp. 1118-1127
-
-
Karalekas, D.1
Cugnoni, J.2
Botsis, J.3
-
16
-
-
2942659828
-
Monitoring by a single fiber Bragg grating of the process induced chemo-physical transformations of a model thermoset
-
Giordano M., Laudati A., Nasser J., Nicolais L., Cusano A., Cutolo A. Monitoring by a single fiber Bragg grating of the process induced chemo-physical transformations of a model thermoset. Sens Actuators, A 2004, 113(2):166-173.
-
(2004)
Sens Actuators, A
, vol.113
, Issue.2
, pp. 166-173
-
-
Giordano, M.1
Laudati, A.2
Nasser, J.3
Nicolais, L.4
Cusano, A.5
Cutolo, A.6
-
17
-
-
2942592129
-
A fresnel's reflection optical fiber sensor for thermoset polymer cure monitoring
-
Vacher S., Molimard J., Gagnaire H., Vautrin A. A fresnel's reflection optical fiber sensor for thermoset polymer cure monitoring. Polym Polym Compos 2003, 12(4):269-276.
-
(2003)
Polym Polym Compos
, vol.12
, Issue.4
, pp. 269-276
-
-
Vacher, S.1
Molimard, J.2
Gagnaire, H.3
Vautrin, A.4
-
18
-
-
0343714833
-
Chemical shrinkage and diffusion-controlled reaction of an epoxy molding compound
-
Tai H.J., Chou H.L. Chemical shrinkage and diffusion-controlled reaction of an epoxy molding compound. Eur Polym J 2000, 36:2213-2219.
-
(2000)
Eur Polym J
, vol.36
, pp. 2213-2219
-
-
Tai, H.J.1
Chou, H.L.2
-
19
-
-
5744236451
-
Residual stress build-up in thermoset films cured above their ultimate glass transition temperature
-
Lange J., Toll S., Månson J.-A.E., Hult A. Residual stress build-up in thermoset films cured above their ultimate glass transition temperature. Polymer 1995, 36(16):3135-3141.
-
(1995)
Polymer
, vol.36
, Issue.16
, pp. 3135-3141
-
-
Lange, J.1
Toll, S.2
Månson, J.-A.E.3
Hult, A.4
-
20
-
-
33846584606
-
Effect of filler concentration of rubbery shear and bulk modulus of molding compounds
-
Yang D.G., Jansen K.M.B., Ernst L.J., Zhang G.Q., Bressers H.J.L., Janssen J.H.J. Effect of filler concentration of rubbery shear and bulk modulus of molding compounds. Microelectron Reliab 2007, 47(2-3):233-239.
-
(2007)
Microelectron Reliab
, vol.47
, Issue.2-3
, pp. 233-239
-
-
Yang, D.G.1
Jansen, K.M.B.2
Ernst, L.J.3
Zhang, G.Q.4
Bressers, H.J.L.5
Janssen, J.H.J.6
-
21
-
-
63749101906
-
Determination of shrinkage and modulus development of thermosetting resins
-
Hoa S.V., Ouellette P., Ngo T.D. Determination of shrinkage and modulus development of thermosetting resins. J Compos Mater 2009, 43(7):783-803.
-
(2009)
J Compos Mater
, vol.43
, Issue.7
, pp. 783-803
-
-
Hoa, S.V.1
Ouellette, P.2
Ngo, T.D.3
-
22
-
-
33846505352
-
Behaviour of a moulded composite part: modelling of dilatometric curve (constant pressure) or pressure (constant volume) with temperature and conversion degree gradients
-
Boyard N., Millischer A., Sobotka V., Bailleul J.L., Delaunay D. Behaviour of a moulded composite part: modelling of dilatometric curve (constant pressure) or pressure (constant volume) with temperature and conversion degree gradients. Compos Sci Technol 2007, 67(6):943-954.
-
(2007)
Compos Sci Technol
, vol.67
, Issue.6
, pp. 943-954
-
-
Boyard, N.1
Millischer, A.2
Sobotka, V.3
Bailleul, J.L.4
Delaunay, D.5
-
23
-
-
0037414381
-
Analysis and modeling of PVTX diagram of an unsaturated polyester resin, thermoplastic additive, and mineral fillers blend
-
Boyard N., Vayer M., Sinturel C., Erre R., Delaunay D. Analysis and modeling of PVTX diagram of an unsaturated polyester resin, thermoplastic additive, and mineral fillers blend. J Appl Polym Sci 2003, 88(5):1258-1267.
-
(2003)
J Appl Polym Sci
, vol.88
, Issue.5
, pp. 1258-1267
-
-
Boyard, N.1
Vayer, M.2
Sinturel, C.3
Erre, R.4
Delaunay, D.5
-
24
-
-
84857184015
-
Measurement and modelling of chemical shrinkage of thermoset composites
-
Nawab Y., Boyard N., Sobotka V., Jacquemin F., Casari P. Measurement and modelling of chemical shrinkage of thermoset composites. Key Eng Mater 2012, 504:1129-1134.
-
(2012)
Key Eng Mater
, vol.504
, pp. 1129-1134
-
-
Nawab, Y.1
Boyard, N.2
Sobotka, V.3
Jacquemin, F.4
Casari, P.5
-
25
-
-
80053253611
-
A device to measure the shrinkage and heat transfers during the curing cycle of thermoset composites
-
Nawab Y., Boyard N., Sobotka V., Casari P., Jacquemin F. A device to measure the shrinkage and heat transfers during the curing cycle of thermoset composites. Adv Mater Res 2011, 326:19-28.
-
(2011)
Adv Mater Res
, vol.326
, pp. 19-28
-
-
Nawab, Y.1
Boyard, N.2
Sobotka, V.3
Casari, P.4
Jacquemin, F.5
-
26
-
-
0027341870
-
Cure shrinkage of thermoset composites
-
Russell J.D. Cure shrinkage of thermoset composites. SAMPE Quarterly 1992, 28-33.
-
(1992)
SAMPE Quarterly
, pp. 28-33
-
-
Russell, J.D.1
-
27
-
-
81955167361
-
Characterization and modeling the thermo-mechanical cure-dependent properties of epoxy molding compound
-
Sadeghinia M., Jansen K.M.B., Ernst L.J. Characterization and modeling the thermo-mechanical cure-dependent properties of epoxy molding compound. Int J Adhes Adhes 2012, 32:82-88.
-
(2012)
Int J Adhes Adhes
, vol.32
, pp. 82-88
-
-
Sadeghinia, M.1
Jansen, K.M.B.2
Ernst, L.J.3
-
28
-
-
26944447532
-
Time-resolved method for the measurement of volume changes during polymerization
-
Holst M., Schänzlin K., Wenzel M., Xu J., Lellinger D., Alig I. Time-resolved method for the measurement of volume changes during polymerization. J Polym Sci, Part B: Polym Phys 2005, 43(17):2314-2325.
-
(2005)
J Polym Sci, Part B: Polym Phys
, vol.43
, Issue.17
, pp. 2314-2325
-
-
Holst, M.1
Schänzlin, K.2
Wenzel, M.3
Xu, J.4
Lellinger, D.5
Alig, I.6
-
29
-
-
0025481064
-
Determination of chemical cure shrinkage in composite laminates
-
Daniel I.M., Karalekas D., Wang T.-M., Gotro J.T. Determination of chemical cure shrinkage in composite laminates. J Compos Technol Res Fall 1990, 12(3):172-176.
-
(1990)
J Compos Technol Res Fall
, vol.12
, Issue.3
, pp. 172-176
-
-
Daniel, I.M.1
Karalekas, D.2
Wang, T.-M.3
Gotro, J.T.4
-
30
-
-
33144472287
-
A note upon the development of residual curing strains in carbon/epoxy laminates. Study by thermomechanical analysis
-
Olivier P.A. A note upon the development of residual curing strains in carbon/epoxy laminates. Study by thermomechanical analysis. Compos A Appl Sci Manuf 2006, 37(4):602-616.
-
(2006)
Compos A Appl Sci Manuf
, vol.37
, Issue.4
, pp. 602-616
-
-
Olivier, P.A.1
-
31
-
-
2342628458
-
Modeling PVTX diagrams: application to various blends based on unsaturated polyester-influence of thermoplastic additive, fillers, and reinforcements
-
Boyard N., Vayer M., Sinturel C., Erre R., Delaunay D. Modeling PVTX diagrams: application to various blends based on unsaturated polyester-influence of thermoplastic additive, fillers, and reinforcements. J Appl Polym Sci 2004, 92(5):2976-2988.
-
(2004)
J Appl Polym Sci
, vol.92
, Issue.5
, pp. 2976-2988
-
-
Boyard, N.1
Vayer, M.2
Sinturel, C.3
Erre, R.4
Delaunay, D.5
-
32
-
-
84867762116
-
-
Transferts thermiques dans le procede d'injection BMC (Bulk Molding Compound). PhD thesis. Université de Nantes
-
Millischer A. Transferts thermiques dans le procede d'injection BMC (Bulk Molding Compound). PhD thesis. Université de Nantes; 2000.
-
(2000)
-
-
Millischer, A.1
-
33
-
-
1642480251
-
Heat transfer with mechanically driven thermal contact resistance at the polymer-mold interface in injection molding of polymers
-
Massé H., Arquis É, Delaunay D., Quilliet S., Le Bot P.H. Heat transfer with mechanically driven thermal contact resistance at the polymer-mold interface in injection molding of polymers. Int J Heat Mass Transf 2004, 47(8-9):2015-2027.
-
(2004)
Int J Heat Mass Transf
, vol.47
, Issue.8-9
, pp. 2015-2027
-
-
Massé, H.1
Arquis É2
Delaunay, D.3
Quilliet, S.4
Le Bot, P.H.5
-
35
-
-
0035651781
-
Thermal conductivity of insulations using guarded hot plates, including recent developments and sources of reference materials
-
David S. Thermal conductivity of insulations using guarded hot plates, including recent developments and sources of reference materials. Meas Sci Technol 2001, 12(12):R89.
-
(2001)
Meas Sci Technol
, vol.12
, Issue.12
-
-
David, S.1
-
36
-
-
0030142127
-
Determination of temperature variable properties of composite materials: methodology and experimental results
-
Bailleul J.L., Delaunay D., Jarny Y. Determination of temperature variable properties of composite materials: methodology and experimental results. J Reinf Plast Compos 1996, 15(5):479-496.
-
(1996)
J Reinf Plast Compos
, vol.15
, Issue.5
, pp. 479-496
-
-
Bailleul, J.L.1
Delaunay, D.2
Jarny, Y.3
-
37
-
-
64549150953
-
A FEM coupling model for properties prediction during the curing of an epoxy matrix
-
Rabearison N., Jochum C., Grandidier J.C. A FEM coupling model for properties prediction during the curing of an epoxy matrix. Comput Mater Sci 2009, 45(3):715-724.
-
(2009)
Comput Mater Sci
, vol.45
, Issue.3
, pp. 715-724
-
-
Rabearison, N.1
Jochum, C.2
Grandidier, J.C.3
-
38
-
-
84985616417
-
Heat transfer and curing in polymer reaction molding
-
Broyer E., Macosko C.W. Heat transfer and curing in polymer reaction molding. AIChE J 1976, 22(2):268-276.
-
(1976)
AIChE J
, vol.22
, Issue.2
, pp. 268-276
-
-
Broyer, E.1
Macosko, C.W.2
-
39
-
-
84989028096
-
Cure of epoxy resins containing epoxidized polyols
-
Podgaiz P., Riccardi C.C., Williams R.J.J. Cure of epoxy resins containing epoxidized polyols. Polym Eng Sci 1992, 32(12):836-840.
-
(1992)
Polym Eng Sci
, vol.32
, Issue.12
, pp. 836-840
-
-
Podgaiz, P.1
Riccardi, C.C.2
Williams, R.J.J.3
-
40
-
-
84987014226
-
Differential scanning calorimetry of the epoxy cure reaction
-
Prime R.B. Differential scanning calorimetry of the epoxy cure reaction. Polym Eng Sci 1973, 13(5):365-371.
-
(1973)
Polym Eng Sci
, vol.13
, Issue.5
, pp. 365-371
-
-
Prime, R.B.1
-
41
-
-
84965444671
-
Kinetics and thermal characterization of thermoset cure
-
Kamal M.R., Sourour S. Kinetics and thermal characterization of thermoset cure. Polym Eng Sci 1973, 13(1):59-64.
-
(1973)
Polym Eng Sci
, vol.13
, Issue.1
, pp. 59-64
-
-
Kamal, M.R.1
Sourour, S.2
-
42
-
-
0029735246
-
Calculation of stresses in crosslinking polymers
-
Adolf D., Martin J.E. Calculation of stresses in crosslinking polymers. J Compos Mater 1996, 30(1):13-34.
-
(1996)
J Compos Mater
, vol.30
, Issue.1
, pp. 13-34
-
-
Adolf, D.1
Martin, J.E.2
-
43
-
-
2542475253
-
A thermodynamically consistent, nonlinear viscoelastic approach for modeling glassy polymers
-
Caruthers J.M., Adolf D.B., Chambers R.S., Shrikhande P. A thermodynamically consistent, nonlinear viscoelastic approach for modeling glassy polymers. Polymer 2004, 45(13):4577-4597.
-
(2004)
Polymer
, vol.45
, Issue.13
, pp. 4577-4597
-
-
Caruthers, J.M.1
Adolf, D.B.2
Chambers, R.S.3
Shrikhande, P.4
-
44
-
-
84867752497
-
-
Optimisation du cycle du cuisson de pièces épaisses en matériau composite. Application a un préimprégné résine époxide/ fibres de verre. PhD thesis. Université de Nantes
-
Bailleul Jl. Optimisation du cycle du cuisson de pièces épaisses en matériau composite. Application a un préimprégné résine époxide/ fibres de verre. PhD thesis. Université de Nantes; 1997.
-
(1997)
-
-
Bailleul, J.L.1
-
45
-
-
0023364331
-
A kinetic model for curing reactions of epoxides with amines
-
Chern C.S., Poehlein G.W. A kinetic model for curing reactions of epoxides with amines. Polym Eng Sci 1987, 27(11):788-795.
-
(1987)
Polym Eng Sci
, vol.27
, Issue.11
, pp. 788-795
-
-
Chern, C.S.1
Poehlein, G.W.2
|