Material characterization and residual stresses simulation during the manufacturing process of epoxy matrix composites

Composites Part A: Applied Science and Manufacturing

Volumn 41, Issue 1, 2010, Pages 108-115

  Abou Msallem, Y ^a   Jacquemin, F ^a   Boyard, N ^a   Poitou, A ^a   Delaunay, D ^a   Chatel, S ^b  

^a UNIVERSITÉ DE NANTES   (France)

^b AIRBUS GROUP INNOVATIONS   (Germany)

Author keywords

A. Thermosetting resin; B. Residual internal stress; B. Thermomechanical; D. Thermal analysis

Indexed keywords

A-THERMAL; CHEMICAL SHRINKAGE; CROSSLINKING REACTION; CURING PROCESS; DEGREE OF CURE; DYNAMIC MECHANICAL MEASUREMENTS; EPOXY-MATRIX COMPOSITE; FINITE ELEMENT SIMULATIONS; GEL POINT; GLASS TRANSITION TEMPERATURE; MANUFACTURING PROCESS; MATERIAL CHARACTERIZATIONS; MATERIAL PROPERTY; MECHANICAL MATERIALS; PREPREGS; RESIDUAL/INTERNAL STRESS; THERMAL ANALYSIS; THERMAL EXPANSION COEFFICIENTS; THERMO-MECHANICAL; THERMOMECHANICAL PROPERTIES; THERMOSETTING RESINS;

CROSSLINKING; CURING; GLASS TRANSITION; INDUSTRIAL APPLICATIONS; MECHANICAL PROPERTIES; RESIDUAL STRESSES; RESINS; SHRINKAGE; SIMULATORS; THERMAL EXPANSION; THERMOANALYSIS; THERMOMECHANICAL TREATMENT; THERMOSETS;

EPOXY RESINS;

EID: 71849120381     PISSN: 1359835X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.compositesa.2009.09.025     Document Type: Article

References (30)

1. Bogetti T.A., and Gillespie J.W. Process-induced stress and deformation in thick-section thermoset composite laminates. J Compos Mater 26 (1992) 626-660
2. Wisnom M.R., Gigliotti M., Ersoy N., Campbell M., and Potter K.D. Mechanisms generating residual stresses and distortion during manufacture of polymer-matrix composite structures. Compos Part A - Appl Sci 37 (2006) 522-529
3. Sirivedin S., Fenner D.N., Nath R.B., and Galiotis C. Matrix crack propagation criteria for model short-carbon fibre/epoxy composites. Compos Sci Technol 60 (2000) 2835-2847
4. Griffin O.H. Three-dimensional curing stresses in symmetric cross-ply laminates with temperature-dependent properties. J Compos Mater 17 (1983) 449-463
5. Hahn H.T. Residual stresses in polymer matrix composite laminates. J Compos Mater 10 (1976) 266-277
6. Nelson RH, Cairns DS. Prediction of dimensional changes in composite laminates during cure. In: 34th international SAMPE symposium and exhibition, May 8-11; 1989.
7. Ruiz E., and Trochu F. Numerical analysis of cure temperature and internal residual stresses in thin and thick parts. Compos Part A - Appl Sci 36 (2005) 806-826
8. White S.R., and Kim Y.K. Process-induced residual stresses analysis of AS4/3501-6 composite material. Mech Compos Mater Struct 5 (1998) 153-186
9. Boyard N., Millischer A., Sobotka V., Bailleul J.L., and Delaunay D. Behaviour of a moulded composite part. Modelling of dilatometric curve (constant pressure) or pressure (constant volume) with temperature and conversion degree gradients. Compos Sci Technol 67 (2007) 943-954
10. Boyard N., Vayer M., Sinturel C., Erre R., and Delaunay D. Analysis and modelling of PVTX diagram of an unsaturated polyester resin, thermoplastic additive, and mineral fillers blend. J Appl Polym Sci 88 (2003) 1258-1267
11. Kamal M.R., and Sourour S. Kinetics and thermal characterization of thermosets cure. Polym Eng Sci 13 (1973) 59-64
12. Prime R.B. Differential scanning calorimetry of the epoxy cure reaction. Polym Eng Sci 13 (1973) 365-371
13. Bailleul J.L., Delaunay D., and Jarny Y. Determination of temperature variable properties of composite materials: methodology and experimental results. J Reinf Plast Compos 15 (1996) 480-496
14. Ramis X., and Salla J.M. Effect of the initiator content and temperature on the curing of an unsaturated polyester resin. J Polym Sci 17 (1999) 751-768
15. Twu J.T., Hill R.R., Wang T.J., and Lee L.J. Numerical simulation of non-isothermal SMC (sheet molding compound) molding. Polym Compos 14 6 (1993) 503-514
16. Krol P., and Gawdzik A. Basic kinetic model for the reaction yielding polyurethanes. J Appl Polym Sci 58 (1995) 729-743
17. Chern C.S., and Poehlein G.W. A kinetic model for curing reaction of epoxides with amines. Polym Eng Sci 27 (1987) 788-795
18. Kim D.S., and Kim S.C. Rubber modified epoxy resin. 1: cure kinetics and chemorheology. Polym Eng Sci 34 (1994) 625-631
19. Millischer A., and Delaunay D. Heat transfer in bulk moulding compound injection process. J Reinf Plast Compos 20 6 (2001) 495-518
20. Pascault J.P., Sautereau H., Verdu J., and Williams R.J.J. Thermosetting polymers. 4th ed. (2002), Marcel Decker Inc.
21. Barkus E.J., and Kroekel C.H. Low shrink reinforced polyester systems. Appl Polym Symp 15 (1970) 113-135
22. Kinkelaar M., Muzumdar S., and Lee L.J. Development of a new dilatometer and its application to low-shrink unsaturated polyester resins. J Appl Polym Sci 45 (1992) 37-50
23. Liu C.J., Kiasat M.S., Nijhof H.J., Blockland H., and Marissen R. The effect of the addition of a low profile additive on the curing shrinkage of an unsaturated polyester resin. Polym Eng Sci 39 1 (1999) 18-25
24. Huang Y.J., and Liu C.M. Volume shrinkage characteristics in the cure of low-shrink unsaturated polyester resins. Polymer 37 3 (1996) 401-412
25. Winter H. Can the gel point of crosslinking polymer be detected by the G′-G″ crossover. Polym Eng Sci 27 (1987) 1698-1702
26. Huang X., Gillespie J.W., and Boghetti T.A. Process-induced stress for woven fabric thick section composite structures. Compos Struct 49 (2000) 303-312
27. Adolf D.B., and Chambers R.S. A thermodynamically consistent, nonlinear viscoelastic approach for modelling thermosets during cure. J Rheol 51 (2007) 23-50
28. Stauffer D. Introduction to percolation theory (1985), Taylor and Francis, London
29. Svanberg J.M., and Holmberg J.A. Prediction of the shape distortions part I: FE-implementation of a path dependent constitutive model. Compos Part A 35 (2004) 711-721
30. Fernlund G., Osooly A., Poursartip A., Vaziri R., Courdji R., Nelson K., et al. Finite element based prediction of process-induced deformation of autoclaved composite structures using 2D process analysis and 3D structural analysis. Compos Struct 62 (2003) 223-234