Finite-element modelling of heat transfer in shaped metal deposition and experimental validation

Acta Materialia

Volumn 60, Issue 19, 2012, Pages 6621-6630

  Fachinotti, Víctor D ^a   Cardona, Alberto ^a   Baufeld, Bernd ^b   Van Der Biest, Omer ^b  

^a UNIVERSIDAD NACIONAL DEL LITORAL   (Argentina)

^b UNIVERSITY OF LEUVEN   (Belgium)

Author keywords

Finite elements; Microstructure; Shaped metal deposition; Temperature evolution

Indexed keywords

COMPLEX PROCESSES; DEPOSITION PROCESS; EXPERIMENTAL OBSERVATION; EXPERIMENTAL VALIDATIONS; FABRICATION PROCESS; FABRICATION TECHNIQUE; FINITE ELEMENT; FINITE ELEMENT MODELLING; FINITE-ELEMENT MODELS; HEAT INPUT; HEAT TRANSFER PROBLEMS; HEATING AND COOLING RATES; HIGH TEMPERATURE GRADIENT; LAYER DEPOSITION; METAL DEPOSITION; NUMBER OF LAYERS; PREDICTED TEMPERATURE FIELD; PROCESS PARAMETERS; SEALED CHAMBERS; TEMPERATURE EVOLUTION; TI-6AL-4V ALLOY; TRAVEL SPEED; TUNGSTEN INERT GAS WELDING; WIRE FEED RATE;

FINITE ELEMENT METHOD; HEATING; MANIPULATORS; MICROSTRUCTURE; THERMOANALYSIS; TUNGSTEN; WALLS (STRUCTURAL PARTITIONS);

DEPOSITION;

EID: 84867533011     PISSN: 13596454     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.actamat.2012.08.031     Document Type: Article

References (56)

1. Bishop J. Shaped metal deposition apparatus. US patent application 20100251961, Rolls-Royce plc, London; 2010.
2. B. Baufeld, O. Van der Biest, and R. Gault Int J Mater Res 11 2011 1536 1542 http://dx.doi.org/10.3139/146.110217
3. J. Goldak, and M. Akhlaghi Computational welding mechanics 2005 Springer Science+Business Media, Inc
4. L.E. Lindgren Computational welding mechanics Thermomechanical and microstructural simulations 2007 Woodhead Publishing Ltd
5. A.J. Dalhuijsen, and A. Segal Int J Numer Methods Eng 23 1986 1807 1829
6. V.R. Voller, C.R. Swaminathan, and B.G. Thomas Int J Numer Methods Eng 30 1990 875 898
7. K.K. Tamma, and R.R. Namburu Int J Numer Methods Eng 29 1990 1473 1485
8. M. Yao, and A. Chait Metall Trans B 24 1993 279 300
9. V.D. Fachinotti, A. Cardona, and A.E. Huespe Int J Numer Methods Eng 44 1999 1863 1884
10. L. Costa, R. Vilar, T. Reti, and A. Deus Acta Mater 53 2005 3987 3999
11. Longuet A, Colin C, Peyre P, Quilici S, Cailletaud G. Modélisation de la fabrication directe de pièces par projection laser: application au Ti-6Al-4V. In: Matériaux 2006, Dijon, France; 2006.
12. A. Longuet, Y. Robert, E. Aeby-Gautier, B. Appolaire, J.F. Mariage, and C. Colin Comput Mater Sci 46 2009 761 766
13. M. Chiumenti, M. Cervera, A. Salmi, C. Agelet de Saracibar, N. Dialami, and K. Matsui Comput Methods Appl Mech Eng 199 2010 2343 2359
14. A. Lundbäck, and L. Lindgren Finite Elem Anal Des 47 2011 1169 1177
15. A. Anca, V.D. Fachinotti, G. Escobar-Palafox, and A. Cardona Int J Numer Methods Eng 85 1 2011 84 106
16. V.D. Fachinotti, A.A. Anca, and A. Cardona Int J Numer Methods Biomed Eng 27 2011 595 607
17. M.A. Wahab, M.J. Painter, and M.H. Davies J Mater Process Technol 77 1998 233 239
18. P. Ferro, H. Porzner, A. Tiziani, and F. Bonollo Model Simulat Mater Sci Eng 14 2006 117 136
19. M. Abid, and M. Siddique Int J Pres Ves Pip 82 2005 860 871
20. Edstorp M. Weld pool simulations. Licentiate thesis. Department of Mathematical Sciences, Chalmers University of Technology and University of Gothenburg, Sweden; 2008.
21. Z. Barsoum, and A. Lundbäck Eng Fail Anal 16 2009 2281 2289
22. L.E. Lindgren Comput Methods Appl Mech Eng 195 2006 6710 6736
23. Kelly SM. Thermal and microstructure modeling of metal deposition processes with application to Ti-6Al-4V. PhD thesis. Virginia Polytechic Institute and State University; 2004.
24. S.M. Kelly, and S.L. Kampe Metall Mater Trans A 35 2004 1869 1879
25. Charles C, Järvstråt N. Modelling Ti-6Al-4V microstructure by evolution laws implemented as finite element subroutines: application to TIG metal deposition. In: David SA, DebRoy T, DuPont JN, Koseki T, Smartt HB, editors. Proceedings of the 8th international conference trends in welding research; 2009, p. 477-85.
26. B. Baufeld, and O. Van der Biest Sci Technol Adv Mater 10 2009 doi:10.1088/1468-6996/10/1/015008.
27. J. Goldak, A. Chakravarti, and M. Bibby Metall Trans B 15 1984 299 305
28. J.W. Elmer, and T.A. Palmer J Appl Phys 95 12 2004 8327 8339
29. N.K. Babu, S.G.S. Raman, R. Mythili, and S. Saroja Mater Charact 58 2007 581 587
30. M. Balasubramanian, V. Jayabalan, and V. Balasubramanian Mater Lett 62 2008 1102 1106
31. R. Rai, J.W. Elmer, T.A. Palmer, and T. DebRoy J Phys D: Appl Phys 40 2007 5753 5766
32. Kelly SM. Characterization and thermal modeling of laser formed Ti-6Al-4V. Master's thesis. Virginia Polytechnic Institute and State University; 2002.
33. Robert Y. Simulation numérique du soudage du TA6V par laser YAG impulsionnel: caractérisation expérimentale et modélisation des aspects thermomécanique associées à ce procédé. PhD thesis. Ecole des Mines de Paris; 2007.
34. Dike JJ, Ortega AR, Rangaswamy P. Finite element modeling and validation of residual stresses in 304l girth welds. In: 5th International conference on trends in welding research, Pine Mountain, GA; 1998.
35. Bonifaz EA. Weld Res 2000;(Suppl. May):121-5.
36. Ericsson M. Simulation of robotic tig-welding. Licentiate thesis. Department of Technology, University of Trollhättan/Uddevalla, Sweden; 2003.
37. R.H. Yeh, S.P. Liaw, and H.B. Yu J Mar Sci Technol 11 4 2003 213 220
38. W. Zhang, C.H. Kim, and T. DebRoy J Appl Phys 95 9 2004 5220 5229
39. H.V. Zhuk, P.A. Kobryn, and S.L. Semiatin J Mater Process Technol 190 2007 387 392
40. Mufti RA. Mechanical and microstructure investigation of weld based rapid prototyping. PhD thesis. Ghulam Ishaq Khan Institute of Engineering Sciences and Technology Session, Pakistan; 2008.
41. A. Askari, and S. Das J Mater Process Technol 173 2006 1 13
42. O.C. Zienkiewicz, and R.L. Taylor The finite element method Volume 1: The basis 5th ed. 2000 Butterworth-Heinemann
43. Nguyen NT, Ohta A, Matsuoka K, Susuki N, Maeda Y. Weld Res 1999;(Suppl. August):265-74.
44. Mendez, P.F. Joining metals using semi-solid slurries. Master's thesis, Massachusetts Institute of Technology; 1995.
45. C. Carmignani, R. Mares, and G. Toselli Comput Methods Appl Mech Eng 179 1999 197 214
46. S.K. Bate, R. Charles, D. Everett, D. OGara, A. Warren, and S. Yellowlees Sensitivity of predicted residual stresses to modelling assumptions A.G. Youtsos, Residual stress and its effects on fatigue and fracture 2006 Springer 105 115
47. A. Anca, A. Cardona, J. Risso, and V.D. Fachinotti Appl Math Model 35 35 2011 688 707
48. J. Goldak, M. Bibby, J. Moore, R. House, and B. Patel Metall Trans B 17 1985 587 600
49. C.S. Wu, J. Chen, and Y.M. Zhang Comput Mater Sci 39 3 2007 635 642
50. JAHM Software, Inc,. MPDB v7.37. 2011.
51. H.G. Fan, and R. Kovacevic J Phys D: Appl Phys 37 2004 2531 2544
52. C.S. Wu, P.C. Zhao, and Y.M. Zhang Weld Res 2004 330 335
53. C.S. Wu, and F. Fan Model Simulat Mater Sci Eng 12 2004 13 20
54. Charles C, Järvstråt N. Development of a microstructure model for metal deposition of titanium alloy Ti-6Al-4V. In: Proceedings of the 11th world conference on titanium (Ti-2007), Kyoto, Japan; 2007.
55. C. Charles Murgau, R. Pederson, and L.E. Lindgren Model Simulat Mater Sci Eng 20 2012 055006
56. T. Ahmed, and H.J. Rack Mater Sci Eng A 243 1998 206 211