Characterising surface energy of pharmaceutical powders by inverse gas chromatography at finite dilution

Journal of Pharmacy and Pharmacology

Volumn 64, Issue 9, 2012, Pages 1337-1348

  Das, Shyamal C ^a   Stewart, Peter J ^a  

^a MONASH UNIVERSITY   (Australia)

Author keywords

inverse gas chromatography; micronisation; mixing; storage; surface energy distributions

Indexed keywords

ACETIC ACID ETHYL ESTER; DICHLOROMETHANE; HEPTANE; INDOMETACIN; LACTOSE; MAGNESIUM STEARATE; NONANE; OCTANE;

ARTICLE; CHEMICAL PROCEDURES; COHESION; CONTROLLED STUDY; DILUTION; DRUG COATING; DRUG MIXTURE; DRUG STORAGE; ENERGY; FINITE DILUTION; HUMIDITY; INVERSE GAS CHROMATOGRAPHY; MECHANOFUSION; MICRONIZATION; PARTICLE SIZE; PHYSICAL PARAMETERS; POWDER; SCANNING ELECTRON MICROSCOPY; SURFACE ENERGY;

ADMINISTRATION, INHALATION; AEROSOLS; ANTI-INFLAMMATORY AGENTS, NON-STEROIDAL; CHROMATOGRAPHY, GAS; DRUG COMPOUNDING; DRUG DELIVERY SYSTEMS; DRUG STORAGE; DRY POWDER INHALERS; EXCIPIENTS; HUMANS; INDOMETHACIN; LACTOSE; MICROSCOPY, ELECTRON, SCANNING; OSMOLAR CONCENTRATION; PARTICLE SIZE; PHYSICOCHEMICAL PHENOMENA; POWDERS; SOLVENTS; STEARIC ACIDS; SURFACE PROPERTIES;

EID: 84864709022     PISSN: 00223573     EISSN: 20427158     Source Type: Journal    
DOI: 10.1111/j.2042-7158.2012.01533.x     Document Type: Article

References (41)

1. Grimsey I, et al,. Interpretation of differences in the surface energies of two optical forms of mannitol by inverse gas chromatography and molecular modelling. Int J Pharm 1999; 191: 43-50. (Pubitemid 29502176)
2. Thielmann F, Pearse D,. Determination of surface heterogeneity profiles on graphite by finite concentration inverse gas chromatography. J Chromatogr A 2002; 969: 323-327. (Pubitemid 35253827)
3. Das S, et al,. Surface energy changes and their relationship with the dispersibility of salmeterol xinafoate powders for inhalation after storage at high RH. Eur J Pharm Sci 2009; 38: 347-354.
4. Thielmann F, et al,. Determination of the surface energy distributions of different processed lactose. Drug Dev Ind Pharm 2007; 33: 1240-1253. (Pubitemid 350208733)
5. Yla-Maihaniemi P, et al,. Inverse gas chromatographic method for measuring the dispersive surface energy distribution for particulates. Langmuir 2008; 24: 9551-9557.
6. Das S, et al,. Determination of the polar and total surface energy distributions of particulates by inverse gas chromatography. Langmuir 2011; 27: 521-523.
7. Das S, et al,. Understanding the dispersibility of lactose powders by total surface energy distributions determined using an inverse gas chromatography at finite dilution. In:, Dalby RN, et al., ed. Proceedings of Respiratory Drug Deliveries Europe Conference. Berlin: Davies Healthcare International Publishing, LLC, 2011: 359-362.
8. Das S, et al,. Use of surface energy distributions by inverse gas chromatography to understand mechanofusion processing and functionality of lactose coated with magnesium stearate. Eur J Pharm Sci 2011; 43: 325-333.
9. Leinonen UI, et al,. Physical and lubrication properties of magnesium stearate. J Pharm Sci 1992; 81: 1194-1198. (Pubitemid 23018127)
10. Tay T, et al,. Magnesium stearate increases salbutamol sulphate dispersion: what is the mechanism? Int J Pharm 2010; 383: 62-69.
11. Pfeffer R, et al,. Synthesis of engineered particulates with tailored properties using dry particle coating. Powder Technol 2001; 117: 40-67. (Pubitemid 32454970)
12. Zhou Q, et al,. Improving powder flow properties of a cohesive lactose monohydrate powder by intensive mechanical dry coating. J Pharm Sci 2010; 99: 969-981.
13. Kumon M, et al,. Novel approach to DPI carrier lactose with mechanofusion process with additives and evaluation by IGC. Chem Pharm Bull 2006; 54: 1508-1514. (Pubitemid 44703976)
14. Kumon M, et al,. Application and mechanofusion of inhalation profile improvement of DPI formulations by mechanofusion with magnesium stearate. Chem Pharm Bull 2008; 56: 617-625. (Pubitemid 351669426)
15. Egawa H, et al,. Solubility parameter and dissolution behaviour of cephalexin powders with different crystallinity. Chem Pharm Bull 1992; 40: 819-820.
16. Briggner L, et al,. The use of isothermal micro calorimetry in the study of changes in crystallinity induced during the processing of powders. Int J Pharm 1994; 105: 125-135. (Pubitemid 24097165)
17. Feeley JC, et al,. Determination of surface properties and flow characteristics of salbutamol sulphate, before and after micronisation. Int J Pharm 1998; 172: 89-96. (Pubitemid 28430246)
18. York P, et al,. Characterisation of the surface energetics of milled dl-propranolol hydrochloride using inverse gas chromatography and molecular modelling. Int J Pharm 1998; 174: 179-186. (Pubitemid 28487002)
19. Florence A, Salole E,. Changes in crystallinity and solubility on comminution of digoxin and observations on spironolactone. J Pharm Pharmacol 1976; 28: 479-480.
20. Jones MD, Price R,. The influence of fine excipient particles on the performance of carrier-based dry powder inhalation formulations. Pharm Res 2006; 23: 1665-1674. (Pubitemid 44200528)
21. Das S, et al,. Influence of storage relative humidity on the dispersion of salmeterol xinafoate powders for inhalation. J Pharm Sci 2009; 98: 1015-1027.
22. Adi H, et al,. Agglomerate strength and dispersion of salmeterol xinafoate from powder mixtures for inhalation. Pharm Res 2006; 23: 2556-2565. (Pubitemid 44691602)
23. Callahan J, et al,. Equilibrium moisture content of pharmaceutical excipients. Drug Dev Ind Pharm 1982; 8: 355-369.
24. Schultz J, et al,. The role of the interface in carbon-fiber epoxy composites. J Adh 1987; 23: 45-60.
25. Thielmann F, et al,. Investigation of the acid-base properties of an MCM supported ruthenium oxide catalyst by inverse gas chromatography and dynamic vapour sorption. In:, Jackson SD, et al., eds. Catalysis in Application. Cambridge, UK: Royal Soc. Chem., Thomas Graham House, 2003: 237.
26. Traini D, et al,. The influence of lactose pseudopolymorphic form on salbutamol sulfate-lactose interactions in DPI formulations. Drug Dev Ind Pharm 2008; 34: 992-1001.
27. van Oss CJ, et al,. Additive and nonadditive surface-tension components and the interpretation of contact angles. Langmuir 1988; 4: 884-891.
28. Das S, Stewart P,. Determination of surface energy distributions of different hydrate forms of magnesium stearate using inverse gas chromatography at finite dilution. Australian Controlled Release Society Conference, Hamilton Island, 2011, abstract no 32.
29. Yang J, et al,. Dry particle coating for improving the flowability of cohesive powders. Powder Technol 2005; 158: 21-33. (Pubitemid 41376283)
30. Green M, et al,. Surface coating of lactose and API particles with magnesium stearate. In:, Dalby RN, et al., eds. Proceedings of Respiratory Drug Delivery Europe Conference. Portugal: Davies Healthcare International Publishing, LLC, 2009: 445-448.
31. Zhou Q, et al,. Characterization of the surface properties of a model pharmaceutical fine powder modified with a pharmaceutical lubricant to improve flow via a mechanical dry coating approach. J Pharm Sci 2011; 100: 3421-3430.
32. Della Volpe C, Siboni S,. Acid-base solid surface free energies and the definition of scales in Good-van Oss-Chaudury theory. J Adhesion Sci Technol 2000; 14: 239-276.
33. Panzer U, Schreiber HP,. On the evaluation of surface interactions by inverse gas chromatography. Macromolecules 1992; 25: 3633-3637.
34. Hadjar H, et al,. An inverse gas chromatography study of crystalline and amorphous silicas. Colloids Surf A Physicochem Eng Aspects 1995; 99: 45-51.
35. Mukhopadhyay P, Schreiber HP,. Aspects of acid-base interactions and use of inverse gas chromatography. Colloids Surf A Physicochem Eng Aspects 1995; 100: 47-7136.
36. Hamieh T, et al,. New approach to characterise physicochemical properties of solid substrates by inverse gas chromatography at infinite dilution III. Determination of the acid-base properties of some solid substrates (polymers, oxides and carbon fibres): a new model. J Chromatogr A 2002; 969: 37-47. (Pubitemid 35253801)
37. Trowbridge L, et al,. Influence of milling on the surface properties of acetaminophen. Pharm Sci (Suppl) 1998; 1: 310.
38. Feeley JC,. The design and characterization of powder particles for respiratory drug delivery. Bradford, UK: University of Bradford, 1999 (dissertation).
39. Newell H, et al,. The use of inverse gas chromatography to measure the surface energy of crystalline, amorphous and recently milled lactose. Pharm Res 2001; 18: 662-666. (Pubitemid 32595796)
40. Heng JYY, et al,. The effects of milling on the surface properties of form I paracetamol crystals. Pharm Res 2006; 23: 1918-1927. (Pubitemid 44200556)
41. Das S, et al,. Agglomerate properties and dispersibility changes of salmeterol xinafoate from powders for inhalation after storage at high relative humidity. Eur J Pharm Sci 2009; 37: 442-450.