Surface energy changes and their relationship with the dispersibility of salmeterol xinafoate powders for inhalation after storage at high RH

European Journal of Pharmaceutical Sciences

Volumn 38, Issue 4, 2009, Pages 347-354

  Das, Shyamal ^a   Larson, Ian ^a   Young, Paul ^b   Stewart, Peter ^a  

^a MONASH UNIVERSITY   (Australia)

^b UNIVERSITY OF SYDNEY   (Australia)

Author keywords

Dispersibility; Powder for inhalation; Relative humidity; Salmeterol xinafoate; Storage; Surface energy

Indexed keywords

LACTOSE; SALMETEROL XINAFOATE;

ARTICLE; CONTROLLED STUDY; DRUG FORMULATION; DRUG SOLUBILITY; DRUG STORAGE; ENERGY; HUMIDITY; INVERSE GAS CHROMATOGRAPHY; POWDER INHALER; PRIORITY JOURNAL; SCANNING ELECTRON MICROSCOPY; SURFACE PROPERTY;

ADMINISTRATION, INHALATION; ALBUTEROL; BRONCHODILATOR AGENTS; DRUG STABILITY; DRUG STORAGE; HUMIDITY; PARTICLE SIZE; POWDERS; SURFACE PROPERTIES;

EID: 70349985702     PISSN: 09280987     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ejps.2009.08.007     Document Type: Article

References (65)

1. Adi H., Larson I., Chiou H., Young P., Traini D., and Stewart P. Agglomerate strength and dispersion of salmeterol xinafoate from powder mixtures for inhalation. Pharm. Res. 23 (2006) 2556-2565
2. Alway B., Sangchantra R., and Stewart P. Modelling the dissolution of diazepam in lactose interactive mixtures. Int. J. Pharm. 130 (1996) 213-224
3. Balard H., Saada A., Siffert B., and Papirer E. Influence of water on the retention of organic probes on clays studied by IGC. Clays Clay Miner. 45 (1997) 489-495
4. Berard V., Lesniewska E., Andres C., Pertuy D., Laroche C., and Pourcelot Y. Dry powder inhaler: influence of humidity on topology and adhesion studied by AFM. Int. J. Pharm. 232 (2002) 213-224
5. Berard V., Lesniewska E., Andres C., Pertuy D., Laroche C., and Pourcelot Y. Affinity scale between a carrier and a drug in DPI studied by atomic force microscopy. Int. J. Pharm. 247 (2002) 127-137
6. Bernhard F., and Steckel H. Proposing a model that correlates surface energy values to aerosol data. Proceedings of the Drug Delivery Lungs. The Aerosol Society, Edinburgh, UK (2005)
7. Borgstrom L., Asking L., and Lipniunas P. An in vivo and in vitro comparison of two powder inhalers following storage at hot/humid conditions. J. Aerosol Med. 18 (2005) 304-310
8. Braun M., Oschmann R., and Schmidt P. Influence of excipients and storage humidity on the deposition of disodium cromoglycate (DSCG) in the twin impinger. Int. J. Pharm. 135 (1996) 53-62
9. Brouwers H. Particle-size distribution and packing fraction of geometric random packings. Phys. Rev. E 74 (2006) 031309
10. Brunauer P., Emmett E., and Teller J. Adsorption of gases in multimolecular layers. J. Am. Chem. Soc. 60 (1938) 309
11. Butt J., and Kappl M. Normal capillary forces. Adv. Colloid Int. Sci. 146 (2009) 48-60
12. Callahan J., Cleary G., Elefant M., Kaplan G., Kensler T., and Nash R. Equilibrium moisture content of pharmaceutical excipients. Drug Dev. Ind. Pharm. 8 (1982) 355-369
13. Cline D., and Dalby R. Predicting the quality of powders for inhalation from surface energy and area. Pharm. Res. 19 (2002) 1274-1277
14. Crooks M., and Ho R. Ordered mixing in direct compression of tablets. Powder Technol. 14 (1976) 161-167
15. Das S., Larson I., Young P., and Stewart P. Influence of storage relative humidity on the dispersion of salmeterol xinafoate powders for inhalation. J. Pharm. Sci. 98 (2009) 1015-1027
16. Derjaguin B., Muller V., and Toporov Y. Effects of contact deformations on the adhesion of particles. J. Coll. Int. Sci. 53 (1975) 314-326
17. Feeley J., Shekunov B., Chow A., and York P. Surface and aerodynamic characteristics of particles for inhalation produced using supercritical fluid technology. Proc. Millennium World Congr. Pharm. Sci. (2000)
18. Fowkes F. Attractive forces at interfaces. J. Ind. Eng. Chem. 56 (1964) 40-52
19. Fowkes F. In: Mittal K. (Ed). Physico-chemical Aspects of Polymer Sciences (1983), Plenum, New York pp. 583
20. Geuns E., Toren J., Barends D., and Bult A. Decrease of the stage-2 deposition in the twin stage impinger during storage of beclomethasone dipropionate dry powder inhalers in controlled and uncontrolled humidities. Eur. J. Pharm. Biopharm. 44 (1997) 187-194
21. Giles C., MacEwan T., Nakhwa S., and Smith D. Studies in adsorption. Part XI. A system for classification of solution adsorption isotherms, and its use in diagnosis of adsorption mechanisms and in measurement of specific surface areas of solids. J. Chem. Soc. 3 (1960) 3973-3993
22. Glaab V., Frieb R., Kubiak R., Ossadnik S., and Schiewe J. Investigating the effect of environmental humidity on fine particle dose data of powder inhalation products. In: Dalby R., Byron P., Peart J., Suman J., Farr S., and Young P. (Eds). Proc. Res. Drug Delivery Conf. Scottsdale, Arizona, USA. River Grove, IL (2008), Davis Healthcare International Publishing 409-412
23. Grimsey I., Feeley J., and York P. Analysis of the surface energy of pharmaceutical powders by inverse gas chromatography. J. Pharm. Sci. 91 (2002) 571-583
24. Harjunen P., Lankinen T., Salonen H., Lehto V., and Jarvinen K. Effects of carriers and storage of formulation on the lung deposition of a hydrophobic and hydrophilic drug from a DPI. Int. J. Pharm. 263 (2003) 151-163
25. Hickey A., Concessio N., Oort V., and Platz R. Factors influencing the dispersion of dry powders as aerosols. Pharm. Technol. (1994) 58-84
26. Hindle M., and Makinen G. Effects of humidity on the in vitro aerosol performance and aerodynamic size distribution of cromolyn sodium for inhalation. Eur. J. Pharm. Sci. 4 (1996) S142
27. Johnson D., Wenger E., and Lambros M. Aersolization and hygroscopic growth evaluation of lyophilized liposome aerosols under controlled temperature and relative humidity conditions. Aerosol Sci. Technol. 25 (1996) 22-30
28. Johnson K., Kendall K., and Roberts A. Surface energy and the contacts of elastic solids. Proc. Royal Soc. Lond. A 324 (1971) 301-313
29. Kendall K., and Stainton C. Adhesion and aggregation of fine particles. Powder Technol. 92 (2001) 815-822
30. Lida K., Hayakawa Y., Okamoto H., Danjo K., and Luenberger H. Influence of storage humidity on the in vitro inhalation properties of salbutamol sulphate dry powder with surface covered lactose carrier. Chem. Pharm. Bull. 52 (2004) 444-446
31. Liu J., and Stewart P. De-aggregation during the dissolution of benzodiazepines in interactive mixtures. J. Pharm. Sci. 87 (1998) 1632-1638
32. Mackin L., Rowley G., and Fletcher E. An investigation of carrier particle type, electrostatic charge and relative humidity on in-vitro drug deposition from dry powder inhaler formulations. Pharm. Sci. 3 (1997) 583-586
33. Maggi L., Bruni R., and Conte U. Influence of moisture on the performance of a new dry powder inhaler. Int. J. Pharm. 177 (1999) 83-91
34. Mukhopadhyay P., and Schreiber H. Aspects of acid-base interactions and use of inverse gas chromatography. Colloids Surf. A: Physicochem. Eng. Aspects 100 (1995) 47-71
35. Newell H., Buckton G., Butler D., Thielmann F., and Williams D. The use of inverse phase gas chromatography to study the change of surface energy of amorphous lactose as a function of relative humidity and the processes of collapse and crystallisation. Int. J. Pharm. 217 (2001) 45-56
36. Padmadisastra Y., Kennedy R., and Stewart P. Influence of carrier moisture adsorption capacity on the degree of adhesion of interactive mixtures. Int. J. Pharm. 104 (1994) R1-R4
37. Padmadisastra Y., Kennedy R., and Stewart P. Solid bridge formation in sulphonamide-Emdex interactive systems. Int. J. Pharm. 112 (1994) 55-63
38. Podczeck F., Newton J., and James M. The influence of constant and changing relative humidity of the air on the autoadhesion force between pharmaceutical powder particles. Int. J. Pharm. 145 (1996) 221-229
39. Podczeck F., Newton J., and James M. Influence of relative humidity of storage air on the adhesion and autoadhesion of micronized particles to particulate and compacted powder surfaces. J. Colloids Interface Sci. 187 (1997) 484-491
40. Price R., Young P., Edge S., and Staniforth J. The influence of relative humidity on particulate interactions in carrier-based dry powder inhaler formulations. Int. J. Pharm. 246 (2002) 47-59
41. Ronggao J., Zhang P., Liqing W., Heng L., Wwisan P., and Chunlong W. Effect of surface modification on surface energy of lactose and performance of dry powder inhalers. Yaoxue Xuebao 40 (2005) 373-376
42. Saleem I., Smyth H., and Telko M. Prediction of dry powder inhaler formulation performance from surface energetics and blending dynamics. Drug Dev. Ind. Pharm. 34 (2008) 1002-1010
43. Schiavone H., Palakodaty S., Clark A., York P., and Tzannis S. Evaluation of SCF-engineered particle-based lactose blends in passive dry powder inhalers. Int. J. Pharm. 281 (2004) 55-66
44. Sethuraman V., and Hickey A. Powder properties and their influence on dry powder inhaler delivery of an antitubercular drug. AAPS PharmSciTech 3 (2002) 28
45. Schultz J., Lavielle L., and Martin C. The role of interface in carbon fibre-epoxy composites. J. Adhesion 23 (1987) 45-60
46. Sohn H., and Moreland C. The effect of particle size distribution on packing density. Can. J. Chem. Eng. 46 (1967) 162-167
47. Sooben K., Buckton G., and Newton J. The measurement of surface energies of materials used in wet granulation under dynamic and moist conditions. Pharm. Sci. (Suppl.) (2000) 2
48. Stewart P. Particle interaction in pharmaceutical systems. Pharm. Int. 7 (1986) 146-149
49. Sunkersett M., Grimsey I., Doughty S., Osborn J., York P., and Rowe R. The changes in surface energetics with relative humidity of carbamazepine and paracetamol as measured by inverse gas chromatography. Eur. J. Pharm. Sci. 13 (2001) 219-225
50. Thielmann F., Naderi M., Traini D., and Young P. Impact of lactose polymorphism on salbutamol sulphate lactose interactions in DPI formulations. In: Dalby R., Byron P., Peart J., Suman J., Farr S., and Young P. (Eds). Proc. Res. Drug Delivery Conf. Scottsdale, Arizona, USA. Davis Healthcare International Publishing, Boca Raton, Florida, USA (2006) 793-795
51. Ticehurst M., York P., Rowe R., and Dwivedi S. Characterisation of the surface properties of α-lactose monohydrate with inverse gas chromatography, used to detect batch variation. Int. J. Pharm. 141 (1996) 93-99
52. Tong H., Shekunov B., York P., and Chow A. Predicting the aerosol performance of dry powder inhalation formulations by interparticulate interaction analysis using inverse gas chromatography. J. Pharm. Sci. 95 (2006) 228-233
53. Traini D., Young P., Rogueda P., and Price R. The use of AFM and surface energy measurements to investigate drug-canister material interactions in a model pressurized metered dose inhaler formulation. Aerosol Sci. Technol. 40 (2006) 227-236
54. Traini D., Young P., Thielmann F., and Acharya M. The influence of lactose pseudopolymorphic form on salbutamol sulfate-lactose interactions in DPI formulations. Drug Dev. Ind. Pharm. 34 (2008) 992-1001
55. Van Oss C. Acid-base interfacial interactions in aqueous media. Colloids Surf. A: Physicochem. Eng. Aspects 78 (1993) 1-49
56. Van Oss C., Good R., and Chaudhury M. Additive and nonadditive surface tension components and the interpretation of contact angles. Langmuir 4 (1988) 884-891
57. Voelkel A. Inverse gas chromatography in characterization of surface. Chemometr. Intelligent Lab. Syst. 72 (2004) 205-207
58. Young R., and Price R. The influence of humidity on the aerosolization of micronized and SEDS produced salbutamol sulphate. Eur. J. Pharm. Sci. 22 (2004) 235-240
59. Young R., Price R., Tobyn M., Buttrum M., and Dey F. Effect of humidity on aerosolization of micronized drugs. Drug Dev. Ind. Pharm. 29 (2003) 959-966
60. Young R., Price R., Tobyn M., Buttrum M., and Dey F. Investigation into the effect of humidity on drug-drug interactions using the atomic force microscope. J. Pharm. Sci. 92 (2003) 815-822
61. Young R., Price R., Tobyn M., Buttrum M., and Dey F. The influence of relative humidity on the cohesion properties of micronized drugs used in inhalation therapy. J. Pharm. Sci. 93 (2004) 753-761
62. Young P., Sung A., Traini D., Kwok P., Chiou H., and Chan H. Influence of humidity on the electrostatic charge and aerosol performance of dry powder inhaler carrier based systems. Pharm. Res. 24 (2007) 963-970
63. Young R., Tobyn M., Price R., Buttrum M., and Dey F. The use of colloid probe microscopy to predict aerosolization performance in dry powder inhalers: AFM and in vitro correlation. J. Pharm. Sci. 95 (2006) 1800-1809
64. Zeng X., MacRitchie H., Marriott C., and Martin G. Humidity-induced changes of the aerodynamic properties of dry powder aerosol formulations containing different carriers. Int. J. Pharm. 333 (2007) 45-55
65. Zhu K., Tan R., Ng W., Shen S., hou Q., and Heng P. Analysis of the influence of relative humidity on the moisture sorption of particles and the aerosolization process in a dry powder inhaler. Aerosol Sci. 39 (2008) 510-524