Finite element analysis of the dental implant using a topology optimization method

Medical Engineering and Physics

Volumn 34, Issue 7, 2012, Pages 999-1008

  Chang, Chih Ling ^a,b   Chen, Chen Sheng ^a   Huang, Chang Hung ^c   Hsu, Ming Lun ^a  

^a NATIONAL YANG MING UNIVERSITY   (Taiwan)

^b SHIN KONG WU HO SU MEMORIAL HOSPITAL   (Taiwan)

^c MACKAY MEMORIAL HOSPITAL   (Taiwan)

Author keywords

Dental threaded implant; Finite element method; Stress; Topology optimization

Indexed keywords

BIOMECHANICAL FUNCTIONS; BIOMECHANICAL PERFORMANCE; BONE GRAFT; BONE INGROWTH; CANCELLOUS BONE; COMMERCIAL SOFTWARE; FE MODEL; IMPLANT STABILITY; MATERIAL PROPERTY; OCCLUSAL LOADING; ORTHOTROPY; REDUNDANT MATERIALS; STRESS LEVELS; TOPOLOGY OPTIMIZATION METHOD; TRANSVERSELY ISOTROPY;

BIOMECHANICS; BONE; FINITE ELEMENT METHOD; SHAPE OPTIMIZATION; STRESSES; THREE DIMENSIONAL;

DENTAL PROSTHESES;

ALGORITHM; ARTICLE; BIOMECHANICS; BONE STRESS; CANCELLOUS BONE; COMPUTER PROGRAM; FINITE ELEMENT ANALYSIS; MECHANICAL STRESS; MECHANICAL TORSION; MOLAR TOOTH; PRIORITY JOURNAL; RIGIDITY; TOOTH CROWN; TOOTH IMPLANTATION; TOPOLOGY OPTIMIZATION METHOD;

BIOMECHANICS; BONE AND BONES; DENTAL IMPLANTS; FINITE ELEMENT ANALYSIS;

EID: 84864539403     PISSN: 13504533     EISSN: 18734030     Source Type: Journal    
DOI: 10.1016/j.medengphy.2012.06.004     Document Type: Article

References (43)

1. Adell R., Lekholm U., Rockler B., Branemark P.I. A 15-year study of osseointegrated implants in the treatment of the edentulous jaw. Int J Oral Surg 1981, 10:387-416.
2. Buser D., Mericske-Stern R., Bernard J.P., Behneke A., Behneke N., Hirt H.P., et al. Long-term evaluation of non-submerged ITI implants. Part 1: 8-year life table analysis of a prospective multi-center study with 2359 implants. Clin Oral Implants Res 1997, 8:161-172.
3. National Institutes of Health Consensus Development Conference statement on dental implants June 13-15, 1988. J Dent Educ 1988;52:824-7.
4. Tesk J.A., Widera O. Stress distribution in bone arising from loading on endosteal dental implants. J Biomed Mater Res 1973, 7:251-261.
5. Kitamura E., Stegaroiu R., Nomura S., Miyakawa O. Influence of marginal bone resorption on stress around an implant - a three-dimensional finite element analysis. J Oral Rehabil 2005, 32:279-286.
6. Geng J.P., Tan K.B., Liu G.R. Application of finite element analysis in implant dentistry: a review of the literature. J Prosthet Dent 2001, 85:585-598.
7. Petrie C.S., Williams J.L. Comparative evaluation of implant designs: influence of diameter, length, and taper on strains in the alveolar crest. A three-dimensional finite-element analysis. Clin Oral Implants Res 2005, 16:486-494.
8. Chang C.L., Chen C.S., Hsu M.L. Biomechanical effect of platform switching in implant dentistry: a three-dimensional finite element analysis. Int J Oral Maxillofac Implants 2010, 25:295-304.
9. Sevimay M., Turhan F., Kilicarslan M.A., Eskitascioglu G. Three-dimensional finite element analysis of the effect of different bone quality on stress distribution in an implant-supported crown. J Prosthet Dent 2005, 93:227-234.
10. Shi L., Li H., Fok A.S., Ucer C., Devlin H., Horner K. Shape optimization of dental implants. Int J Oral Maxillofac Implants 2007, 22:911-920.
11. Lin C.Y., Hsiao C.C., Chen P.Q., Hollister S.J. Interbody fusion cage design using integrated global layout and local microstructure topology optimization. Spine (Phila Pa 1976) 2004, 29:1747-1754.
12. Zhong Z.C., Wei S.H., Wang J.P., Feng C.K., Chen C.S., Yu C.H. Finite element analysis of the lumbar spine with a new cage using a topology optimization method. Med Eng Phys 2006, 28:90-98.
13. Kao H.C., Gung Y.W., Chung T.F., Hsu M.L. The influence of abutment angulation on micromotion level for immediately loaded dental implants: a 3-D finite element analysis. Int J Oral Maxillofac Implants 2008, 23:623-630.
14. Wang T.M., Leu L.J., Wang J., Lin L.D. Effects of prosthesis materials and prosthesis splinting on peri-implant bone stress around implants in poor-quality bone: a numeric analysis. Int J Oral Maxillofac Implants 2002, 17:231-237.
15. Mellal A., Wiskott H.W., Botsis J., Scherrer S.S., Belser U.C. Stimulating effect of implant loading on surrounding bone. Comparison of three numerical models and validation by in vivo data. Clin Oral Implants Res 2004, 15:239-248.
16. Liao S.H., Tong R.F., Dong J.X. Influence of anisotropy on peri-implant stress and strain in complete mandible model from CT. Comput Med Imaging Graph 2008, 32:53-60.
17. Koca O.L., Eskitascioglu G., Usumez A. Three-dimensional finite-element analysis of functional stresses in different bone locations produced by implants placed in the maxillary posterior region of the sinus floor. J Prosthet Dent 2005, 93:38-44.
18. ANSYS Inc. Theory Reference Release 11.0.
19. Lin C.L., Lin Y.H., Chang S.H. Multi-factorial analysis of variables influencing the bone loss of an implant placed in the maxilla: prediction using FEA and SED bone remodeling algorithm. J Biomech 2010, 43:644-651.
20. Eggers G.W., Shindler T.O., Pomerat C.M. The influence of the contact-compression factor on osteogenesis in surgical fractures. J Bone Joint Surg Am 1949, 31A:693-716.
21. Treharne R.W. Review of Wolff's law and its proposed means of operation. Orthop Rev 1981, 10:35-47.
22. Eggers Lura H. Tissue reaction of bone upon mechanical stresses. Am J Orthod 1952, 38:453-459.
23. Misch C.E., Suzuki J.B., Misch-Dietsh F.M., Bidez M.W. A positive correlation between occlusal trauma and peri-implant bone loss: literature support. Implant Dent 2005, 14:108-116.
24. Quirynen M., Naert I., van Steenberghe D. Fixture design and overload influence marginal bone loss and fixture success in the Branemark system. Clin Oral Implants Res 1992, 3:104-111.
25. Albrektsson T., Zarb G., Worthington P., Eriksson A.R. The long-term efficacy of currently used dental implants: a review and proposed criteria of success. Int J Oral Maxillofac Implants 1986, 1:11-25.
26. Rudd K.D., O'Leary T.J., Stumpf A.J. Horizontal tooth mobility in carefully screened subjects. Periodontics 1964, 2:65-68.
27. Sekine H., Komiyama Y., Hotta H., et al. Mobility characteristics and tactile sensitivity of osseointegrated fixture-supporting systems. Tissue integration in oral maxillofacial reconstruction 1986, 326-332. Excerpta Medica, Amsterdam. D. Van Steeberghe (Ed.).
28. Lemons J.E., Dietsh-Misch F. Biomaterials for dental implants. Implant dentistry 1999, 271-302. Mosby, St. Louis. C.E. Misch (Ed.).
29. Fransson C., Lekholm U., Jemt T., Berglundh T. Prevalence of subjects with progressive bone loss at implants. Clin Oral Implants Res 2005, 16:440-446.
30. van Staden R.C., Guan H., Johnson N.W., Loo Y.C., Meredith N. Step-wise analysis of the dental implant insertion process using the finite element technique. Clin Oral Implants Res 2008, 19:303-313.
31. Huang H.L., Chang C.H., Hsu J.T., Fallgatter A.M., Ko C.C. Comparison of implant body designs and threaded designs of dental implants: a 3-dimensional finite element analysis. Int J Oral Maxillofac Implants 2007, 22:551-562.
32. O'Mahony A.M., Williams J.L., Spencer P. Anisotropic elasticity of cortical and cancellous bone in the posterior mandible increases peri-implant stress and strain under oblique loading. Clin Oral Implants Res 2001, 12:648-657.
33. Schwartz-Dabney C.L., Dechow P.C. Edentulation alters material properties of cortical bone in the human mandible. J Dent Res 2002, 81:613-617.
34. Yang H., Ma X., Guo T. Some factors that affect the comparison between isotropic and orthotropic inhomogeneous finite element material models of femur. Med Eng Phys 2010, 32:553-560.
35. Hsu M.L., Chen F.C., Kao H.C., Cheng C.K. Influence of off-axis loading of an anterior maxillary implant: a 3-dimensional finite element analysis. Int J Oral Maxillofac Implants 2007, 22:301-309.
36. Kitamura E., Stegaroiu R., Nomura S., Miyakawa O. Biomechanical aspects of marginal bone resorption around osseointegrated implants: considerations based on a three-dimensional finite element analysis. Clin Oral Implants Res 2004, 15:401-412.
37. Hagberg C. Assessment of bite force: a review. J Craniomandib Disord 1987, 1:162-169.
38. Morneburg T.R., Proschel P.A. In vivo forces on implants influenced by occlusal scheme and food consistency. Int J Prosthodont 2003, 16:481-486.
39. Proeschel P.A., Morneburg T. Task-dependence of activity/bite-force relations and its impact on estimation of chewing force from EMG. J Dent Res 2002, 81:464-468.
40. Eskitascioglu G., Usumez A., Sevimay M., Soykan E., Unsal E. The influence of occlusal loading location on stresses transferred to implant-supported prostheses and supporting bone: a three-dimensional finite element study. J Prosthet Dent 2004, 91:144-150.
41. Benzing U.R., Gall H., Weber H. Biomechanical aspects of two different implant-prosthetic concepts for edentulous maxillae. Int J Oral Maxillofac Implants 1995, 10:188-198.
42. Moffa J.P., Lugassy A.A., Guckes A.D., Gettleman L. An evaluation of nonprecious alloys for use with porcelain veneers. Part I. Physical properties. J Prosthet Dent 1973, 30:424-431.
43. van Rossen I.P., Braak L.H., de Putter C., de Groot K. Stress-absorbing elements in dental implants. J Prosthet Dent 1990, 64:198-205.