Multi-factorial analysis of variables influencing the bone loss of an implant placed in the maxilla: Prediction using FEA and SED bone remodeling algorithm

Journal of Biomechanics

Volumn 43, Issue 4, 2010, Pages 644-651

  Lin, Chun Li ^a   Lin, Yu Hao ^a   Chang, Shih Hao ^b  

^a CHANG GUNG UNIVERSITY   (Taiwan)

^b CHANG GUNG MEMORIAL HOSPITAL   (Taiwan)

Author keywords

Abutment implant connection; Bone loss; Bone remodeling; Finite element analysis; Implant placement

Indexed keywords

ABUTMENT-IMPLANT CONNECTION; BONE LOSS; BONE REMODELING; CT IMAGE; FE MODEL; FINITE ELEMENTS; IMPLANT PLACEMENT; LATERAL LOADS; LOAD CONDITION; LOAD DIRECTION; LOADING CONDITION; OCCLUSAL FORCES; SIMULATED RESULTS; STRAIN ENERGY DENSITY;

ABUTMENTS (BRIDGE); ALGORITHMS; AXIAL LOADS; COMPUTERIZED TOMOGRAPHY; FINITE ELEMENT METHOD; LOADING; PROSTHETICS; SCREWS;

BONE;

ALGORITHM; ARTICLE; BIOMECHANICS; BONE REMODELING; COMPRESSION; COMPUTER ASSISTED TOMOGRAPHY; CONTROLLED STUDY; FINITE ELEMENT ANALYSIS; MATHEMATICAL MODEL; MAXILLA; MECHANICAL STRESS; MECHANICAL TORSION; OSTEOLYSIS; PREDICTION; PRIORITY JOURNAL; STRAIN ENERGY DENSITY; TOOTH PROSTHESIS; ADULT; BIOLOGICAL MODEL; COMPUTER SIMULATION; FACTORIAL ANALYSIS; HUMAN; MALE; PATHOPHYSIOLOGY; PROSTHESIS FAILURE; STATISTICAL MODEL; TOOTH IMPLANTATION;

ADULT; ALGORITHMS; BONE REMODELING; BONE RESORPTION; COMPUTER SIMULATION; DENTAL IMPLANTS; FACTOR ANALYSIS, STATISTICAL; FINITE ELEMENT ANALYSIS; HUMANS; MALE; MAXILLA; MODELS, BIOLOGICAL; MODELS, STATISTICAL; PROSTHESIS FAILURE;

EID: 77952528699     PISSN: 00219290     EISSN: 18732380     Source Type: Journal    
DOI: 10.1016/j.jbiomech.2009.10.030     Document Type: Article

References (35)

1. Akça K., Cehreli M.C., Iplikçioĝlu H. Evaluation of the mechanical characteristics of the implant-abutment complex of a reduced-diameter morse-taper implant. A nonlinear finite element stress analysis. Clinical Oral Implants Research 2003, 14:444-454.
2. Astrand P., Engquist B., Dahlgren S., Engquist E., Feldmann H., Grondahl K. Astra Tech and Branemark System implants: a prospective 5-year comparative study. Results after one year. Clinical Implant Dentistry and Related Research 1999, 1:17-26.
3. Beaupré G.S., Orr T.E., Carter D.R. An approach for time-dependent bone modeling and remodeling-application: a preliminary remodeling simulation. Journal of Orthopaedic Research 1990, 8:662-670.
4. Benzing U.R., Gall H., Weber H. Biomechanical aspects of two different implant-prosthetic concepts for edentulous maxillae. International Journal of Oral Maxillofacial Implants 1995, 10:188-198.
5. Bozkaya D., Müftü S. Mechanics of the tapered interference fit in dental implants. Journal of Biomechanics 2003, 36:1649-1658.
6. Bozkaya D., Müftü S., Müftü A. Evaluation of load transfer characteristics of five different implants in compact bone at different load levels by finite elements analysis. Journal of Prosthetic Dentistry 2004, 92:523-530.
7. Bozkaya D., Müftü S. Mechanics of the taper integrated screwed-in (TIS) abutments used in dental implants. Journal of Biomechanics 2005, 38:87-97.
8. Brunski J.B., Puleo D.A., Nanci A. Biomaterials and biomechanics of oral and maxillofacial implants: current status and future developments. International Journal of Oral & Maxillofacial Implants 2000, 15:15-46.
9. Cehreli M., Sahin S., Akça K. Role of mechanical environment and implant design on bone tissue differentiation: current knowledge and future contexts. Journal of Dentistry 2004, 32:123-132.
10. Chou H.Y., Jagodnik J.J., Müftü S. Predictions of bone remodeling around dental implant systems. Journal of Biomechanics 2008, 41:1365-1373.
11. Clelland N.L., Lee J.K., Bimbenet O.C., Brantley W.A. A three-dimensional finite element stress analysis of angled abutments for an implant placed in the anterior maxilla. Journal of Prosthetic Dentistry 1995, 4:95-100.
12. Dar F.H., Meakin J.R., Aspden R.M. Statistical methods in finite element analysis. Journal of Biomechanics 2002, 35:1155-1161.
13. Eager D.E., Gunsolly J.C., Feldman S. Comparison of angles and standard abutments and their effect on clinical outcomes: a preliminary report. International Journal of Oral & Maxillofacial Implants 2000, 15:819-823.
14. Frost H.M. Skeletal structural adaptations to mechanical usage (SATMU): 1. Redefining Wolff's law: the bone modeling problem. Anatomical Record 1990, 226:403-413.
15. Geng J., Tan K.B., Liu G. Application of finite element analysis in implant dentistry: a review of the literature. Journal of Prosthetic Dentistry 2001, 85:585-598.
16. Hass R., Polak C., Furhauser R., Mailath P., Dortbudak O., Watzek G. A long-term follow-up of 76 Branemark single-tooth implants. Clinical Oral Implants Research 2002, 13:38-43.
17. Holmes D.C., Loftus J.T. Influence of bone quality on stress distribution for endosseous implants. Journal of Oral Implantology 1997, 23:104-111.
18. Huiskes R., Weinans H., Grootenboer H.J., Dalstra M., Fudala B., Slooff T.J. Adaptive bone-remodeling theory applied to prosthetic-design analysis. Journal of Biomechanics 1987, 20:1135-1150.
19. Kozlovsky A., Tal H., Laufer B.Z., Leshem R., Rohrer M.D., Weinreb M., Artzi Z. Impact of implant overloading on the peri-implant bone in inflamed and non-inflamed peri-implant mucosa. Clinical Oral Implants Research 2007, 18:601-610.
20. Lekholm U., Van Steenberghe D., Hermann I., Bolender C., Folmer T., Gunne J. Osseointegrated implants in the treatment of partially edentulous jaws: a prospective 5-year multicenter study. International Journal of Oral & Maxillofacial Implants 1994, 9:627-635.
21. Li J., Li H., Shi L., Fok A.S., Ucer C., Devlin H., Horner K., Silikas N. A mathematical model for simulating the bone remodeling process under mechanical stimulus. Dental Materials 2007, 23:1073-1078.
22. Lin C.L., Chang S.H., Chang W.J., Kuo Y.C. Factorial analysis of variables influencing mechanical characteristics of a single tooth implant placed in the maxilla using finite element analysis and the statistics-based Taguchi method. European Journal of Oral Sciences 2007, 115:408-416.
23. Lin, D., Li, Q., Li, W. & Swain, M., Dental implant induced bone remodeling and associated algorithms. Journal of the Mechanical Behavior of Biomedical Materials in press.
24. McNamara B.P., Taylor D., Prendergast P.J. Computer prediction of adaptive bone remodelling around noncemented femoral prostheses: the relationship between damage-based and strain-based algorithms. Medical Engineering & Physics 1997, 19:454-463.
25. Mellal A., Wiskott H.W., Botsis J., Scherrer S.S., Belser U.C. Stimulating effect of implant loading on surrounding bone. Comparison of three numerical models and validation by in vivo data. Clinical Oral Implants Research 2004, 15:239-248.
26. Merz B.R., Hunenbart S., Belser U.C. Mechanics of the implant-abutment connection: an 8-degree taper compared to a butt joint connection. International Journal of Oral & Maxillofacial Implants 2000, 15:519-526.
27. Moberg L.E., Köndell P.A., Sagulin G.B., Bolin A., Heimdahl A., Gynther G.W. Branemark System and ITI Dental Implant System for treatment of mandibular edentulism. A comparative randomized study: 3-year follow-up. Clinical Oral Implants Research 2001, 12:450-461.
28. Moffa J.P., Lugassy A.A., Guckes A.D., Gettleman L. An evaluation of nonprecious alloys for use with porcelain veneers. Part I. Physical properties. Journal of Prosthetic Dentistry 1973, 30:424-431.
29. Sahin S., Cehreli M.C., Yalçin E. The influence of functional forces on the biomechanics of implant-supported prostheses-a review. Journal of Dentistry 2002, 30:271-282.
30. Schwarz M.S. Mechanical complications of dental implants. Clinical Oral Implants Research 2000, 11:156-158.
31. Senay C., Nur H., Irfan A., Zulfu A. Comparison of stress distribution around vertical and angled implant with finite-element analysis. Quintessence international 1996, 27:591-598.
32. Sethi A., Kaus T., Sochor P. The use of angulated abutments in implant dentistry: five-year clinical results of an ongoing prospective study. International Journal of Oral & Maxillofacial Implants 2000, 15:801-810.
33. Stanford C.M., Brand R.A. Toward an understanding of implant occlusion and strain adaptive bone modeling and remodeling. Journal of Prosthetic Dentistry 1999, 81:553-561.
34. Tada S., Stegaroiu R., Kitamurs E., Miyakawa O., Kusakari H. Influence of implant design and bone quality on stress/strain distribution in bone around implants: a 3-dimensional finite element analysis. International Journal of Oral & Maxillofacial Implants 2003, 18:357-368.
35. Van Steenberghe D., De Mars G., Quirynen M., Jacobs R., Naert I. A prospective split-mouth comparative study of two screw-shaped self-tapping pure titanium implant systems. Clinical Oral Implants Research 2000, 11:202-209.