Machining variability impacts on the strength of a 'chair-side' CAD-CAM ceramic

Dental Materials

Volumn 28, Issue 8, 2012, Pages 880-887

  Addison, Owen ^a   Cao, Xu ^a   Sunnar, Parminder ^a   Fleming, Garry J P ^b  

^a UNIVERSITY OF BIRMINGHAM   (United Kingdom)

^b DUBLIN DENTAL UNIVERSITY HOSPITAL   (Ireland)

Author keywords

Biaxial flexure strength; CAD CAM; Feldspathic ceramic

Indexed keywords

ANNEALING CYCLES; BIAXIAL FLEXURE STRENGTH; CAD-CAM; CLINICAL FAILURE; CLINICAL STATE; CONFIDENCE INTERVAL; CONTACT PROFILOMETRY; FELDSPATHIC CERAMICS; FRACTOGRAPHIC ANALYSIS; FRACTURE FRAGMENTS; MACHINING TOOL; NOVEL METHODOLOGY; OPERATIVE PARAMETERS; POST-MACHINING; RANDOM SELECTION; SOFTENING TEMPERATURE; WEIBULL ANALYSIS; WEIBULL PARAMETERS;

ANNEALING; CAMS; CERAMIC MATERIALS; FRACTURE; GLASS TRANSITION; SCANNING ELECTRON MICROSCOPY; SURFACE ROUGHNESS;

GRINDING (MACHINING);

ANALYSIS OF VARIANCE; ARTICLE; COMPUTER AIDED DESIGN; CONFIDENCE INTERVAL; DENTAL PORCELAIN; DENTAL PROCEDURE; HEAT; INSTRUMENTATION; NONPARAMETRIC TEST; PLIABILITY; REPRODUCIBILITY; SURFACE PROPERTY; SURVIVAL; TOOTH PROSTHESIS;

ANALYSIS OF VARIANCE; COMPUTER-AIDED DESIGN; CONFIDENCE INTERVALS; DENTAL MODELS; DENTAL PORCELAIN; DENTAL PROSTHESIS DESIGN; DENTAL STRESS ANALYSIS; HOT TEMPERATURE; PLIABILITY; REPRODUCIBILITY OF RESULTS; STATISTICS, NONPARAMETRIC; SURFACE PROPERTIES; SURVIVAL ANALYSIS;

EID: 84863779101     PISSN: 01095641     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.dental.2012.04.017     Document Type: Article

References (43)

1. W.H. Mormann The evolution of the CEREC system Journal of the American Dental Association 137 2006 7 13
2. D. Rekow Computer-aided design and manufacturing in dentistry: a review of the state of the art Journal of Prosthetic Dentistry 58 1987 512 516
3. Zhang GM, Satish KG, Ko WK. The mechanics of material removal mechanisms in machining ceramics. Technical Report TR 94-22rl. Institute for Systems Research (NIST), Maryland; 1994.
4. D. Jianxin, and L. Taichiu Surface integrity in electro-discharge machining, ultrasonic machining, and diamond saw cutting of ceramic composites Ceramics International 26 2000 825 830
5. A.N. Samant, and N.B. Dahotre Laser machining of structural ceramics - a review Journal of the European Ceramic Society 29 2009 969 993
6. N. Ramachandran, and N. Ramakrishnan A review of abrasive jet machining Journal of Materials Processing Technology 39 1993 21 31
7. J.P. Choi, B.H. Jeon, and B.H. Kim Chemical-assisted ultrasonic machining of glass Journal of Materials Processing Technology 191 2007 153 156
8. K.X. Hu, and A. Chandra A fracture mechanics approach to modelling strength degradation in ceramic grinding processes Journal of Engineering for Industry 115 1993 73 83
9. W. Konig, and M. Popp Precision machining of advanced ceramics Ceramic Bulletin 68 1989 550 553
10. B.R. Lawn Fracture of brittle solids 2nd ed. 1993 Cambridge University Press Cambridge
11. J. Sindel, A. Petschelt, F. Grellner, C. Dierken, and P. Griel Evaluation of subsurface damage in CAD/CAM machined dental ceramics Journal of Materials Science Materials in Medicine 9 1998 291 295
12. W.D. Kingery, H.K. Bowen, and D.R. Uhlmann Microstructure of ceramics. Introduction to ceramics 1976 John Wiley and Sons New York
13. A.A. Griffith The phenomena of rupture and flow in solids Philosophical Transactions of the Royal Society 221 1921 163 198
14. J.P. Coffey, K.J. Anusavice, P.H. DeHoff, R.B. Lee, and B. Hojjatie Influence of contraction mismatch and cooling rate on flexural failure of PFM systems Journal of Dental Research 67 1988 61 65
15. D. Rekow, and V.P. Thompson Near-surface damage - a persistent problem in crowns obtained by computer-aided design and manufacturing Proceedings of the Institution of Mechanical Engineers-Part H 219 2005 233 243
16. T. Nakamura, N. Dei, T. Kojima, and K. Wakabayashi Marginal and internal fit of Cerec 3 CAD/CAM all-ceramic crowns International Journal of Prosthodontics 16 2003 244 248
17. K.B. Lee, C.W. Park, K.H. Kim, and T.Y. Kwon Marginal and internal fit of all-ceramic crowns fabricated with two different CAD/CAM systems Dental Materials Journal 27 2008 422 426
18. S. Tomita, A. Shin-Ya, H. Gomi, T. Matsuda, S. Katagiri, and A. Shin-Ya Machining accuracy of CAD/CAM ceramic crowns fabricated with repeated machining using the same diamond bur Dental Materials Journal 24 2005 123 133
19. I.L. Denry, J.A. Holloway, and L.A. Tarr Effect of heat treatment on microcrack healing behavior of a machinable dental ceramic Journal of Biomedical Materials Research 48 1999 791 796
20. S. Timoshenko, and S. Woinowsky-Krieger Symmetrical bending of circular plates Theory of plates and shells 2nd ed. 1959 McGraw-Hill New York
21. K. Zeng, A. Odén, and D. Rowcliffe Evaluation of mechanical properties of dental ceramic materials in combination with porcelain International Journal of Prosthodontics 11 1998 183 189
22. R. Danzer, P. Supancic, J. Pascual, and T. Lube Fracture statistics of ceramics - Weibull statistics and deviations from Weibull statistics Engineering Fracture Mechanics 74 2007 2919 2932
23. G.D. Quinn A NIST recommended practice guide. Fractography of ceramics and glasses 2007 National Institute of Standards and Technology Washington, DC (Special Publication 960-16)
24. H.Y. Chen, R. Hickel, J.C. Setcos, and K.H. Kunzelmann Effects of surface finish and fatigue testing on the fracture strength of CAD-CAM and pressed-ceramic crowns Journal of Prosthetic Dentistry 82 1999 468 475
25. A. Bindl, H. Lüthy, and W.H. Mörmann Strength and fracture pattern of monolithic CAD/CAM-generated posterior crowns Dental Materials 22 2006 29 36
26. M. Zahran, O. El-Mowafy, L. Tam, P.A. Watson, and Y. Finer Fracture strength and fatigue resistance of all-ceramic molar crowns manufactured with CAD/CAM technology Journal of Prosthodontics 17 2008 370 377
27. A. Attia, K.M. Abdelaziz, S. Freitag, and M. Kern Fracture load of composite resin and feldspathic all-ceramic CAD/CAM crowns Journal of Prosthetic Dentistry 95 2006 117 123
28. J.R. Kelly Clinically relevant approach to failure testing of all-ceramic restorations Journal of Prosthetic Dentistry 81 1999 652 661
29. J.R. Kelly, S.D. Campbell, and H.K. Bowen Fracture-surface analysis of dental ceramics Journal of Prosthetic Dentistry 62 1989 536 541
30. C.H. Gibbs, P.E. Mahan, H.C. Lundeen, K. Brehnan, E.K. Walsh, and W.B. Holbrook Occlusal forces during chewing and swallowing as measured by sound transmission Journal of Prosthetic Dentistry 46 1981 443 449
31. M. Kikuchi, T.W. Korioth, and A.G. Hannam The association among occlusal contacts, clenching effort, and bite force distribution in man Journal of Dental Research 76 1997 1316 1325
32. G. Isgro, O. Addison, and G.J. Fleming Transient and residual stresses induced during the sintering of two dentin ceramics Dental Materials 27 2011 379 385
33. H. Schwickerath The strength characteristics of CEREC Quintesssenz 43 1992 669 677
34. L. Buso, O.B. Oliveira-Júnior, F. Hiroshi Fujiy, G.H. Leão Lombardo, H. Ramalho Sarmento, and F. Campos Biaxial flexural strength of CAD/CAM ceramics Minerva Stomatologica 60 2011 311 319
35. R. Bernebaum, and I. Brodie Measurement of the tensile strength of brittle materials British Journal of Applied Physics 10 1959 281 287
36. D.J. Fasbinder Clinical performance of chairside CAD/CAM restorations Journal of the American Dental Association 137 2006 22S 31S
37. N. Martin, and N.M. Jedynakiewicz Clinical performance of CEREC ceramic inlays: a systematic review Dental Materials 15 1999 54 61
38. T. Otto, and D. Schneider Long-term clinical results of chairside Cerec CAD/CAM inlays and onlays: a case series International Journal of Prosthodontics 21 2008 53 59
39. G. Sjögren, M. Molin, and J.W. van Dijken A 10-year prospective evaluation of CAD/CAM-manufactured (Cerec) ceramic inlays cemented with a chemically cured or dual-cured resin composite International Journal of Prosthodontics 17 2004 241 246
40. M. Federlin, K.A. Hiller, and G. Schmalz Controlled, prospective clinical split-mouth study of cast gold vs. ceramic partial crowns: 5.5 year results American Journal of Dentistry 23 2010 161 167
41. J. Bernhart, A. Bräuning, M.J. Altenburger, and K.T. Wrbas Cerec3D endocrowns - two-year clinical examination of CAD/CAM crowns for restoring endodontically treated molars International Journal of Computerized Dentistry 13 2010 141 154
42. G. Isgró, O. Addison, and G.J. Fleming The deformation and strength of a dental ceramic following resin-cement coating Journal of Dentistry 39 2011 122 127
43. H. Fischer, M. Hemelik, R. Telle, and R. Marx Influence of annealing temperature on the strength of dental glass ceramic materials Dental Materials 21 2005 671 677