Transient and residual stresses induced during the sintering of two dentin ceramics

Dental Materials

Volumn 27, Issue 4, 2011, Pages 379-385

  Isgro G ^a   Addison, O ^b   Fleming, G J P ^a  

^a TRINITY COLLEGE DUBLIN   (Ireland)

^b UNIVERSITY OF BIRMINGHAM   (United Kingdom)

Author keywords

Bi axial flexure strength; Dental porcelain; Profilometric evaluation

Indexed keywords

BIAXIAL FLEXURE STRENGTH; COOLING PARAMETERS; DENTAL PORCELAIN; HIGH RESOLUTION; MAXIMUM DEFLECTION; PAIR-WISE COMPARISON; PROFILOMETERS; PROFILOMETRIC EVALUATION; RESIDUAL THERMAL STRESS; SIGNIFICANT IMPACTS; SINTERED SPECIMEN; SINTERING EFFECT; STRESS-INDUCED DEFORMATION; SURFACE STATE; TEST SPECIMENS; TWO-WAY ANOVA;

DEFORMATION; PORCELAIN; PROFILOMETRY; REGRESSION ANALYSIS; SILICON NITRIDE; SINTERING;

ANALYSIS OF VARIANCE (ANOVA);

GLASS CERAMICS; VITADUR ALPHA;

ALGORITHM; ARTICLE; CERAMICS; CHEMISTRY; CLINICAL TRIAL; COMPARATIVE STUDY; CONTROLLED CLINICAL TRIAL; CONTROLLED STUDY; DENTAL CARE; DESICCATION; HEAT; HUMAN; INSTRUMENTATION; MATERIALS TESTING; MECHANICAL STRESS; PLIABILITY; RANDOMIZED CONTROLLED TRIAL; SURFACE PROPERTY; TENSILE STRENGTH; TIME; TOOTH PROSTHESIS;

ALGORITHMS; CERAMICS; DENTAL PORCELAIN; DENTAL STRESS ANALYSIS; DESICCATION; HOT TEMPERATURE; HUMANS; MATERIALS TESTING; PLIABILITY; STRESS, MECHANICAL; SURFACE PROPERTIES; TENSILE STRENGTH; TIME FACTORS;

EID: 79952282676     PISSN: 01095641     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.dental.2010.11.018     Document Type: Article

References (52)

1. F.J.T. Burke, A.J.E. Qualthrough, and R.W. Hale Dentine-bonded all-ceramic crowns: current status J Amer Dent Assoc 129 1998 455 460
2. A.M. Casson, J.C. Glyn Jones, C.C. Youngson, and D.J. Wood The effect of luting media on the fracture resistance of a flame sprayed all-ceramic crown J Dent 29 2001 539 544 (Pubitemid 33660601)
3. F.J.T. Burke Fracture resistance of teeth restored with dentine bonded crowns: the effect of increased tooth preparation Quintessence Int 27 1996 115 121 (Pubitemid 126699233)
4. F.J.T. Burke, and D.C. Watts Fracture resistance of teeth restored with dentine-bonded crowns Quintessence Int 25 1994 335 340
5. R.P. Pagniano, R.R. Seghi, S.F. Rosenstiel, R. Wang, and N. Katsube The effect of a layer of resin luting agent on the biaxial flexure strength of two all-ceramic systems J Prosthet Dent 93 2005 459 466 (Pubitemid 40637589)
6. V. Piddock, P.M. Marquis, and H.J. Wilson Structure-property relationships of dental porcelains used in jacket crowns Br Dent J 156 1984 395 398
7. S.F. Rosenstiel, P.K. Gupta, R.A. Van Der Sluys, and M.H. Zimmerman Strength of a dental glass-ceramic after surface coating Dent Mater 9 1993 274 279
8. J.R. Kelly Clinically relevant approach to failure testing of all-ceramic restorations J Prosthet Dent 81 1999 652 661
9. C.K. Harvey, and J.R. Kelly Contact damage as a failure mode during in vitro testing J Prosthodont 5 1996 95 100 (Pubitemid 126734525)
10. K.J. Anusavice, and B. Hojjatie Tensile stresses in glass-ceramic crowns: effect of flaws and cement voids Int J Prosthod 5 1992 351 358
11. J.R. Kelly, I. Nishimura, and S.D. Campbell Ceramics in dentistry: historical roots and current perspectives J Prosthet Dent 75 1996 18 32 (Pubitemid 126654378)
12. J.R. Kelly, S.D. Campbell, and H.K. Bowen Fracture-surface analysis of dental ceramics J Prosthet Dent 62 1989 536 541
13. J.B. Quinn, G.D. Quinn, J.R. Kelly, and S.S. Scherrer Fractographic analyses of three ceramic whole crown restoration failures Dent Mater 21 2005 920 929 (Pubitemid 41336634)
14. R. Berenbaum, and I. Brodie Measurement of tensile strength of brittle materials Br J Appl Phys 10 1959 281 287
15. P.D. Williams, and D.C. Smith Measurement of tensile strength of dental restorative materials by use of a diametral compression test J Dent Res 50 1971 436 442
16. A. Rudnick, A.R. Hunter, and F.C. Holden An analysis of the diametral-compression test Mater Res Stand 3 1963 283 289
17. R. Earnshaw, and D.C. Smith The tensile and compressive strength of plaster and stone Aust Dent J 11 1966 415 422
18. M.N. Giovan, and G. Sines Biaxial and uniaxial data for statistical comparison of a ceramic's strength J Am Ceram Soc 62 1979 510 515 (Pubitemid 10423275)
19. S. Ban, and K.J. Anusavice Influence of test method on failure stress of brittle materials J Dent Res 69 1990 1791 1799
20. S. Ban, J. Hasegawa, and K.J. Anusavice Effect of loading conditions on bi-axial flexure strength of dental cements Dent Mater 8 1992 100 104
21. G.J.P. Fleming, F.J. Shaini, and P.M. Marquis An assessment of the influence of mixing induced variability on the bi-axial flexure strength of dentine porcelain discs and the implications for laboratory testing of porcelain specimens Dent Mater 16 2000 114 119
22. V. Piddock, P.M. Marquis, and H.J. Wilson The mechanical strength and microstructure of all-ceramic crowns J Dent 15 1987 153 158
23. J.E. Ritter Fatigue strength of silicate glasses Phys Chem Glass 11 1970 16 17
24. D.K. Shetty, A.R. Rosenfield, P. McGuire, G.K. Bansal, and W.H. Duckworth Biaxial flexure tests for ceramics Am Ceram Soc Bull 59 1980 1193 1197
25. G. de With, and H.H.M. Wagemans Ball-on-ring test revisted J Am Ceram Soc 72 1989 1538 1541
26. Hornberger H. Strength microstructure relationships in a dental alumina glass composite. Ph.D. Thesis 1995, The University of Birmingham.
27. P.M. Marquis The influence of cements on the mechanical performance of dental ceramics Bioceramics 5 1992 317 324
28. G.J.P. Fleming, L. Nolan, and J.J. Harris The in vitro clinical failure of all-ceramic crowns and the connector area of fixed partial dentures: the influence of interfacial surface roughness J Dent 33 2005 405 412
29. G.J.P. Fleming, S.F.A. El-lakwah, J.J. Harris, and P.M. Marquis The influence of interfacial surface roughness on bilayered ceramic specimen performance Dent Mater 20 2004 142 149
30. G.J.P. Fleming, R.M. Shelton, and P.M. Marquis The influence of clinically induced variability on the bi-axial fracture strength of aluminous core porcelain discs J Dent 27 1999 587 594
31. J.P. Coffey, K.J. Anusavice, P.H. DeHoff, R.B. Lee, and B. Hojjatie Influence of contraction mismatch and cooling rate on flexural failure of PFM systems J Dent Res 67 1988 61 65
32. K.J. Anusavice, and R.B. Lee Effect of firing temperature and water exposure on crack propagation in unglazed porcelain J Dent Res 68 1989 1075 1081
33. G. Isgró, O. Addison, and G.J.P. Fleming The deformation and strength of a dental ceramic following resin-cement coating J Dent 2010 10:1016/j.jdent.2010.10.015
34. S. Timoshenko, and S. Woinowsky-Krieger Symmetrical bending of circular plates Theory of plates and shells 2nd ed 1959 McGraw-Hill New York pp. 87-121.
35. IPS. e.max® Ceram Product profile Ivoclar-Vivadent AG, Schaan, Liechtenstein.
36. C.H. Land Porcelain dental art Dent Cosmos 45 1903 437 444
37. O. Addison, P.M. Marquis, and G.J.P. Fleming Resin elasticity and the strengthening of all-ceramic restorations J Dent Res 86 2007 519 523
38. O. Addison, P.M. Marquis, and G.J.P. Fleming Resin strengthening of dental ceramics - the impact of surface texture and silane J Dent 35 2007 416 424
39. G. Isgró, O. Addison, and G.J.P. Fleming Stress induced deformation of a dental ceramic following adhesive cementation J Dent Res 89 2010 87 90
40. O. Addison, P.M. Marquis, and G.J.P. Fleming The impact of modifying alumina air abrasion parameters on the performance of a porcelain laminate restorative material Dent Mater 23 2007 1332 1341 (Pubitemid 47391005)
41. G.J.P. Fleming, H.S. Jandu, L. Nolan, and F.J. Shaini The influence of alumina abrasion and cement lute on the strength of a porcelain laminate veneering material J Dent 32 2004 67 74 (Pubitemid 37491401)
42. O. Addison, P.M. Marquis, and G.J.P. Fleming The impact of hydrofluoric acid surface treatments on the performance of a porcelain laminate restorative material Dent Mater 23 2007 461 468 (Pubitemid 46281286)
43. G.J.P. Fleming, and O. Addison Adhesive cementation and the strengthening of all-ceramic dental restorations J Adhes Sci Tech 23 2009 945 959
44. O. Addison, and G.J.P. Fleming The influence of cement lute and thermocycling on the strength of porcelain laminate veneer (PLV) surface preparations Dent Mater 20 2004 286 292
45. O. Addison, P.M. Marquis, and G.J.P. Fleming Quantifying the strength of a resin-coated ceramic J Dent Res 87 2008 542 547
46. O. Addison, G.J.P. Fleming, and P.M. Marquis The influence of thermocycling on the longevity of porcelain laminate veneer (PLV) restorations Dent Mater 19 2003 292 298
47. O. Addison, P.M. Marquis, and G.J.P. Fleming Adhesive luting of all-ceramic restorations - the impact of cementation variables and short term water storage on the strength of a feldspathic dental ceramic J Adhes Dent 10 2008 285 293
48. I.L. Denry, and L.A. Tarr Effect of heat treatment on microcrack healing behaviour of a machinable dental ceramic Appl Biomater 48 1999 791 796
49. G. Isgró, H. Wang, C.J. Kleverlaan, and A.J. Feilzer The effects of thermal mismatch and fabrication procedures on the deflection of layered all-ceramic discs Dent Mater 21 2005 649 655 (Pubitemid 40822783)
50. F. Beuer, J. Schweiger, M. Eichberger, H.F. Kappert, W. Gernet, and D. Edelhoff High strength CAD/CAM-fabricated veneering material sintered to zirconia copings-a new fabrication mode for all-ceramic restorations Dent Mater 25 2009 121 128
51. E. Tsalouchou, M.J. Cattell, J.C. Knowles, P. Pittayachawan, and A. McDonald Fatigue and fracture properties of yttria partially stabilized zirconia crown systems Dent Mater 24 2008 308 318 (Pubitemid 351146667)
52. N. Ereifej, N. Silikas, and D.C. Watts Initial versus final fracture of metal-free-crowns, analysed via acoustic emission Dent Mater 24 2008 1289 1295