The deformation and strength of a dental ceramic following resin-cement coating

Journal of Dentistry

Volumn 39, Issue 2, 2011, Pages 122-127

  Isgro G ^a   Addison, O ^b   Fleming, G J P ^a  

^a TRINITY COLLEGE DUBLIN   (Ireland)

^b UNIVERSITY OF BIRMINGHAM   (United Kingdom)

Author keywords

Bi axial flexure strength; Ceramic; Profilometric technique; Transient and residual stresses

Indexed keywords

ALUMINUM OXIDE; ALUMINUM SILICATE; IPS EMPRESS CERAMIC; IPS-EMPRESS CERAMIC; RELY X; RELY-X; RESIN CEMENT;

ALGORITHM; ARTICLE; CEMENTATION; CHEMISTRY; COMPARATIVE STUDY; DENTAL BONDING; DENTAL ETCHING; HEAT; HUMAN; MATERIALS TESTING; MECHANICAL STRESS; METHODOLOGY; PLIABILITY; POLYMERIZATION; RADIATION DOSE; SURFACE PROPERTY; TIME; TOOTH BRUSHING; TOOTH PROSTHESIS; YOUNG MODULUS;

ALGORITHMS; ALUMINUM OXIDE; ALUMINUM SILICATES; CEMENTATION; DENTAL ETCHING; DENTAL POLISHING; DENTAL PORCELAIN; ELASTIC MODULUS; HOT TEMPERATURE; HUMANS; LIGHT-CURING OF DENTAL ADHESIVES; MATERIALS TESTING; PLIABILITY; POLYMERIZATION; RADIATION DOSAGE; RESIN CEMENTS; STRESS, MECHANICAL; SURFACE PROPERTIES; TIME FACTORS;

EID: 79955068112     PISSN: 03005712     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jdent.2010.10.015     Document Type: Article

References (34)

1. G.J.P. Fleming, and O. Addison Adhesive cementation and the strengthening of all-ceramic dental restorations Journal of Adhesive Science and Technology 23 2009 945 959
2. D.M. Wolf, J.M. Powers, and K.L. O'Keefe Bond strength of composite to etched and sandblasted porcelain American Journal of Dentistry 6 1993 155 158
3. O. Addison, and G.J.P. Fleming The impact of modifying alumina air abrasion parameters on the fracture strength of a porcelain laminate restorative material Dental Materials 23 2007 1332 1341
4. H.R. Horn Porcelain laminate veneers bonded to etched enamel R.W. Phillips, Symposium on dental materials, vol. 27 1983 Dental Clinics of North America 671 684
5. O. Addison, P.M. Marquis, and G.J.P. Fleming The impact of hydrofluoric acid surface treatments on the performance of a porcelain laminate restorative material Dental Materials 23 2007 461 468
6. N. De Jager, A.J. Feilzer, and C.L. Davidson The influence of surface roughness on porcelain strengths Dental Materials 16 2000 381 388
7. T.W. Yen, R.B. Blackman, and R.J. Baez Effect of acid etching on the flexural strength of a feldspathic porcelain and a castable glass ceramic Journal of Prosthetic Dentistry 70 1993 224 233
8. R.P. Pagniano, R.R. Seghi, S.F. Rosenstiel, R. Wang, and N. Katsube The effect of a layer of resin luting agent on the biaxial flexure strength of two all-ceramic systems Journal of Prosthetic Dentistry 93 2005 459 466
9. S.F. Rosenstiel, P.K. Gupta, R.A. Van der Sluys, and M.H. Zimmerman Strength of a dental glass-ceramic after surface coating Dental Materials 9 1993 274 279
10. A.A. Griffith Phenomena of rupture and flow in solids Philosophical Transactions of the Royal Society 221 1921 163 198
11. O. Addison, P.M. Marquis, and G.J.P. Fleming Resin elasticity and the strengthening of all-ceramic restorations Journal of Dental Research 86 2007 519 523
12. O. Addison, P.M. Marquis, and G.J.P. Fleming Resin strengthening of dental ceramic - the impact of surface texture and silane Journal of Dentistry 35 2007 416 424
13. O. Addison, P.M. Marquis, and G.J.P. Fleming Quantifying the strength of a resin-coated dental ceramic Journal of Dental Research 87 2008 542 547
14. G.J.P. Fleming, R.F. Maguire, G. Bhamra, F.M. Burke, and P.M. Marquis The strengthening mechanism of resin cements on porcelain surfaces Journal of Dental Research 85 2006 272 276
15. S.L. Fok, B.C. Mitchell, J. Smart, and B.J. Marsden A numerical study on the application of Weibull theory to brittle materials Engineering Fracture Mechanics 68 2001 1171 1179
16. J.F. McCabe, and T.E. Carrick A statistical approach to the mechanical testing of dental materials Dental Materials 2 1986 139 142
17. W. Weibull A statistical distribution function of wide applicability Journal of Applied Mechanics 18 1951 293 297
18. J.P. Coffey, K.J. Anusavice, P.H. Dehoff, R.B. Lee, and B. Hojjatie Influence of contraction mismatch and cooling rate on flexural failure of PFM systems Journal of Dental Research 67 1988 61 65
19. G. Isgró, O. Addison, and G.J.P. Fleming Stress induced deformation of a dental ceramic following adhesive cementation Journal of Dental Research 89 2010 87 90
20. G.J.P. Fleming, F.J. Shaini, and P.M. Marquis An assessment of the influence of mixing induced variability on the bi-axial flexure strength of dentine porcelain discs and the implications for laboratory testing of porcelain specimens Dental Materials 16 2000 114 119
21. ISO 4049 Dentistry polymer based filling restorative and luting materials 2000 International Organisation for Standardisation
22. L. Musanje, and B.W. Darvell Curing-light attenuation in filled-resin restorative materials Dental Materials 22 2006 804 817
23. G.S. Bhamra, and G.J.P. Fleming Effects of halogen irradiation variables (tip diameter, irradiance, irradiation protocol) on flexural strength properties of resin-based composite materials Journal of Dentistry 36 2008 643 650
24. I.L. Denry, and L.A. Tarr Effect of heat treatment on microcrack healing behaviour of a machinable dental ceramic Applied Biomaterials 48 1999 791 796
25. G. Isgró, H. Wang, C.J. Kleverlaan, and A.J. Feilzer The effects of thermal mismatch and fabrication procedures on the deflection of layered all-ceramic discs Dental Materials 21 2005 649 655
26. C.H. Hsueh, M.J. Lance, and M.K. Ferber Stress distributions in thin bilayer discs subjected to ball-on-ring tests Journal of the American Ceramic Society 8 2005 1687 1690
27. I. Lee, W. An, J. Chang, and C. Um Influence of ceramic thickness and curing mode on the polymerization shrinkage kinetics of dual-cured resin cements Dental Materials 24 2008 1141 1147
28. N. Ilie, and R. Hickel Correlation between ceramics translucency and polymerization efficiency through ceramics Dental Materials 24 2008 908 914
29. J.W. McLean Ceramics in clinical dentistry British Dental Journal 164 1988 187 194
30. G.S. Bhamra, G.J.P. Fleming, and B.W. Darvell Influence of LED irradiance on flexural properties and Vickers hardness of resin-based composite materials Dental Materials 26 2010 148 155
31. N. Silikas, K. Kavvadia, G. Eliades, and D. Watts Surface characterisation of modern resin composites: a multitechnique approach American Journal of Dentistry 18 2005 95 100
32. 3/TiCN ceramics Materials Chemistry and Physics 80 2003 305 308
33. W. Konig, and M. Popp Precision machining of advanced ceramics Ceramics Bulletin 68 1989 550 553
34. D. Nathanson Principles of porcelain use as an inlay/onlay material G.A. Gaber, R.E. Goldstein, Porcelain & composite inlays & onlays 1993 Quintessence Illinois 23 32