Future Directions for Solution-Based Processing of Inorganic Materials

Solution Processing of Inorganic Materials

Volumn , Issue , 2008, Pages 449-470

  Van Hest, M F A M ^a   Ginley, D S ^a  

^a NATIONAL RENEWABLE ENERGY LABORATORY   (United States)

Author keywords

Deposition approaches and full solution based processing; Inorganic materials and solution based processing; Next generation applications

Indexed keywords

EID: 84863397859     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1002/9780470407790.ch14     Document Type: Chapter

References (74)

1. Lira-Cantu, M.; Norrman, K.; Andreasen, J. W.; Casan-Pastor, N.; Krebs, F. C. 2007. Semiconductor oxides as electron acceptors in hybrid organic-inorganic solar cells. ECS Trans. 3: 1-9.
2. Reale, A.; Brown, T. M.; Di Carlo, A.; Giannini, F.; Brunetti, F.; Leonardi, E.; Lucci, M.; Terranova, M. L.; Orlanducci, S.; Tamburri, E.; Toschi, F.; Sessa, V. 2006. Nanocomposites for organic and hybrid organic-inorganic solar cells. Proc. SPIE-Int. Soc. Opt. Eng. 6334: 63340Y/63341-63340Y/63348.
3. Lira-Cantu, M.; Krebs, F. C. 2005. Polymer photovoltaics: From conjugated polymers to hybrid organic-inorganic solar cells. Recent Res. Dev. Appl. Phys. 8: 71-98.
4. Nguyen Cong, H.; Dieng, M.; Sene, C.; Chartier, P. 2000. Hybrid organic- inorganic solar cells: Case of the all thin film PMeT(Y)/CdS(X) junctions. Sol. Energy Mater. Sol. Cells 63: 23-35.
5. Li, F.; Zhang, Z. 2005. Synthesis of high quality CdS nanorods by solvothermal process, and their photoluminescence. J. Nanoparticle Research 7: 685-689.
6. Rivkin, T.; Curtis, C.; Miedaner, A.; Perkins, J. D.; Alleman, J.; Ginley, D. S. 2002. Direct-write processing for photovoltaic cells. Conference Record of the 29th IEEE Photovoltaic Specialist Conference. pp. 1326-1329.
7. Steen, W. M. 2003. Laser material processing: An overview. J. Opt. A: Pure Appl. Opt. 5:S 3-S 7.
8. Young, R. T.; Wood, R. F. 1982. Laser processing of semiconductor materials. Ann. Rev. Mater. Sci. 12: 323-350.
9. Fortunato, E.; Ginley, D.; Hosono, H.; Paine, D. C. 2007. Transparent conducting oxides for photovoltaics. MRS Bull. 32: 242-247.
10. Hosono, H. 2006. Ionic amorphous oxide semiconductors: Material design, carrier transport, and device application. J. Non-Cryst. Solids 352: 851-858.
11. Boyd, J.; Moore, S. K. 2005. Transparent transistors. IEEE Spectrum March 2005: 18-19.
12. Wager, J. F. 2003. Transparent electronics. Science 300: 1245-1246.
13. White, M. S.; Olson, D. C.; Shaheen, S. E.; Kopidakis, N.; Ginley, D. S. 2006. Inverted bulk-heterojunction organic photovoltaic device using a solution-derived ZnO underlayer. Appl. Phys. Lett. 89: 143517/143511-143517/143513.
14. Olson, D. C.; Shaheen, S. E.; Collins, R. T.; Ginley, D. S. 2007. The effect of atmosphere and ZnO morphology on the performance of hybrid poly(3-hexylthiophene)/ZnO nanofiber photovoltaic devices. J. Phys. Chem. C 111: 16670-16678.
15. Kaydanova, T.; Miedaner, A.; Perkins, J. D.; Curtis, C.; Alleman, J. L.; Ginley, D. S. 2007. Direct-write inkjet printing for fabrication of barium strontium titanate-based tunable circuits. Thin Solid Films 515: 3820-3824.
16. Olson, D. C.; Piris, J.; Collins, R. T.; Shaheen, S. E.; Ginley, D. S. 2006. Hybrid photovoltaic devices of polymer and ZnO nanofiber composites. Thin Solid Films 496: 26-29.
17. Kaydanova, T.; Miedaner, A.; Perkins, J. D.; Curtis, C.; Alleman, J. L.; Ginley, D. S. 2007. Direct-write inkjet printing for fabrication of strontium titanate-based tunable circuits. Thin Solid Films 515: 3820-3824.
18. Curtis, C. J.; Rivkin, T.; Miedaner, A.; Alleman, J.; Perkins, J.; Smith, L.; Ginley, D. S. 2002. Direct-write printing of silver metallizations on silicon solar cells. Mater. Res. Soc. Symp. Proc. 730: 79-84.
19. Ginley, D. S. 1999. Nanoparticle-derived contacts for photovoltaic cells Proc. -Electrochem. Soc.. pp. 99-11.
20. Dearden, A. L.; Smith, P. J.; Shin, D.-Y.; Reis, N.; Derby, B.; O'Brien, P. 2005. A low curing temperature silver ink for use in ink-jet printing and subsequent production of conductive tracks. Macromol. Rapid Commun. 26: 315-318.
21. Xia, Y. N.; Whitesides, G. M. 1998. Soft lithography. Angew. Chem. Int. Ed. 37: 550-575.
22. Yu, A. A.; Savas, T. A.; Taylor, G. S.; Guiseppe-Elie, A.; Smith, H. I.; Stellacci, F. 2005. Supramolecular nanostamping: Using DNA as movable type. Nano Lett. 5: 1061-1064.
23. Groeger, R. 2007. Nano contact printing with afm-controlled phase-separated block copolymer layers. Institut fur Nanotechnologie, Fakultat fur Physik, Universitat Karlsruhe, Karlsruhe, Germany. Report. i-vii, pp. 1-130.
24. Park, J. D.; Lee, K. D. 2007. Method for manufacturing stamp for nanoimprint lithography having two-dimensional pattern of uniform size and shape, and method for photonic crystal using the same. LG Electronics Inc., S. Korea.
25. Chen, L. Q.; Chan-Park, M. B.; Yan, Y. H.; Zhang, Q.; Li, C. M.; Zhang, J. 2007. High aspect ratio silicon nanomoulds for UV embossing fabricated by directional thermal oxidation using an oxidation mask. Nanotechnology 18: 355307/355301-355307/355307.
26. Shestopalov, A. A.; Clark, R. L.; Toone, E. J. 2007. Inkless microcontact printing on self-assembled monolayers of Fmoc-protected aminothiols. J. Am. Chem. Soc. 129: 13818-13819.
27. Kim, Y.-K.; Kim, G. T.; Ha, J. S. 2007. Simple patterning via adhesion between a buffered-oxide etchant-treated PDMS stamp and a SiO 2 substrate Adv. Funct. Mater. 17: 2125-2132.
28. Huang, C.; Lu, N.; Chi, L. 2007. Surface patterning approaches based on Langmuir -Blodgett technique. Huaxue Jinzhan 19: 852-859.
29. Ash, M.; Ash, I. 2006. H andbook of Rheology Modifiers. Synapse Information Resources, Endicot, NY. pp. 1-1154.
30. Pauzauzkie, P.; Yang, P. 2006. Nanowire photonics. Materials Today 9: 36.
31. Jie, J. S.; Zhang, W. J.; Jiang, Y.; Lee, S. T. 2006. Single-crystal CdSe nanoribbon field-effect transistors and photoelectric applications. Appl. Phys. Lett. 89: 133118.
32. Moore, D.; Wang, Z. L. 2006. Growth of anisotropic one-dimensional ZnS nanostructures. J. Mater. Chem. 16: 3898-3905.
33. Vörös, J.; Ramsden, J. J.; Csucs, G.; Szendro, I.; De Paul, S. M.; Textor, M.; Spencer, N. D. 2002. Optical grating coupler biosensors. Biomaterials 23: 3699-3710.
34. Shockley, W.; Queisser, H. J. 1961. Detailed balance limit of efficiency of p-n junction solar cells. J. Appl. Phys. 32: 510-519.
35. Luque, A.; Martí, A.; Nozik, A. J. 2007. Quantum dots: Multiple exciton generation and intermediate bands. MRS Bull. 32: 236-241.
36. Beard, M. C.; Knutsen, K. P.; Yu, P.; Luther, J. M.; Song, Q.; Metzger, W. K.; Ellingson, R. J.; Nozik, A. J. 2007. Multiple exciton generation in colloidal silicon nanocrystals. Nano Lett. 7: 2506-2512.
37. Nozik, A. J. 2007. Third generation solar photon conversion. Abstracts of Papers, 233rd ACS National Meeting (Chicago, IL; March 25-29). PHYS-082.
38. Green, M. A. 2003. Third Generation Photovoltaics: Advanced Solar Energy Conversion. Springer-Verlag, Berlin. pp. 1-160.
39. Haupt, M.; Miller, S.; Ladenburger, A.; Sauer, R.; Thonke, K.; Spatz, J. P.; Rietmüller, S.; Möller, M. 2002. Semiconductor nanostructures defined with self-organizing polymers. J. Appl. Phys. 91: 6057-6059.
40. White, M. S.; Olson, D. C.; Shaheen, S. E.; Kopidakis, N.; Ginley, D. S. 2006. Inverted bulk-heterojunction organic photovoltaic device using a solution-derived ZnO underlayer. Appl. Phys. Lett. 89: 143517/143511-143517/143513.
41. Van der Vaart, N. C.; Lifka, H.; Budzelaar, F. P. M.; Rubingh, J. E. J. M.; Hoppenbrouwers, J. J. L.; Dijksman, J. F.; Verbeek, R. G. F. A.; Van Woudenberg, R.; Vossen, F. J.; Hiddink, M. G. H.; Rosink, J. J. W. M.; Bernards, T. N. M.; Giraldo, A.; Young, N. D.; Fish, D. A.; Childs, M. J.; Steer, W. A.; Lee, D.; George, D. S. 2005. Distinguished paper: Towards large-area full-color active-matrix polymer OLED television. J. Soc. Inf. Display 13: 9-16.
42. Kitamura, T. 2006. Electronic paper for human communication and environmental protection. Oyo Butsuri 75: 995-999.
43. Li, L.; He, J.; Zhang, S.; Li, H.; Chen, C.; Yang, J.; Zou, J. 2004. Microcapsule process and application in electronic paper. Gongnent Cailiao 35: 407-409, 413.
44. Sung, J. H.; Jang, I. B.; Choi, H. J.; Chen, I.-J. 2004. Titania-coated polystyrene spheres for electronic ink. Polym. Prepr. (Am. Chem. Soc., Div. Polym. Chem.) 45: 970-971.
45. Omodani, M. 2003. Trends of the study and development of electronic paper. Oyo Butsuri 72: 176-180.
46. Rogers, J. A.; Baldwin, K.; Bao, Z.; Dodabalapur, A.; Raju, V. R.; Ewing, J.; Amundson, K. 2001. Rubber stamped plastic circuits for electronic paper. Proceedings-International Symposium on Advanced Packaging Materials: Processes, Properties, and Interfaces. pp. 98-103.
47. Ju, S.; Facchetti, A.; Xuan, Y.; Liu, J.; Ishikawa, F.; Ye, P.; Zhou, C.; Marks, T.; Janes, D. B. 2007. Fabrication of fully transparent nanowire transistors for transparent and flexible electronics. Nature Nanotechnol. 2: 378-384.
48. Sunohara, S.; Kitamura, T. 2007. Investigation of color electrophoretic display utilizing electrophoretic colored particles. Nippon Gazo Gakkaishi 46: 247-253.
49. Günter, P. 2000. Non linear optical effects and materials. Springer Ser. Opt. Sci. 72: 540 pp.
50. Fan, H.; Lopez, G. P.; Brinker, C. J. 2000. Rapid prototyping of patterned multifunctional nanostructurs. Mater. Res. Soc. Symp. Proc. 625: 141-150.
51. Sigaev, V. N.; Lotarev, S. V.; Orlova, E. V.; Stefanovich, S. Y.; Pernice, P.; Aronne, A.; Fanelli, E.; Gregora, I. 2007. Lanthanum borogermanate glass-based active dielectrics. J. Non-Cryst. Solids 353: 1956-1960.
52. Lin, A.; Kim, B. H.; Moon, D. S.; Chung, Y.; Han, W.-T. 2007. Cu 2+-doped germano-silicate glass fiber with high resonant non linearity. Opt. Express 15: 3665-3672.
53. Lin, A.; Kim, B. H.; Ju, S.; Han, W.-T. 2007. Fabrication and third-order non linearity of germano-silicate glass fiber incorporated with Au nanoparticles. Proc. SPIE-Int. Soc. Opt. Eng. 6481: 64810M/64811-64810M/64817.
54. Kang, E.-H.; Bu, T.; Jin, P.; Sun, J.; Yang, Y.; Shen, J. 2007. L ayer-by-layer deposited organic/inorganic hybrid multilayer films containing noncentrosymmetrically orientated azobenzene chromophores. Langmuir 23: 7594-7601.
55. Kobayashi, T.; Ogawa, R.; Miyazawa, K. I.; Kuwabara, M. 2002. Fabrication of beta-BaB 2 O 4 thin films with (00l) preferred orientation through the chemical solution deposition technique. J. Mater. Res. 17: 844-851.
56. Zhao, Y.; Chen, Y.; Zhang, X.-C.; Raravikar, N. R.; Ajayan, P. M.; Lu, T.-M.; Wang, G.-C.; Schadler Feist, L. S. 2002. Ultrafast all-optical switch using carbon nanotube polymer composites. Rensselaer Polytechnic Institute. U.S. Patent 6,782,154, pp. 1-15.
57. Saji, T.; Hiraga, T.; Moritani, T.; Tanaka, N.; Yanagimoto, H.; Ueno, I.; Tsujita, K. 2001. Production method of organic thin film and optical component. Agency of Industrial Sciences and Technology, Japan; Dainichi Seika Kogyo K. K.; Victor Co. of Japan. Japanese Patent 2001-003195, pp. 1-20.
58. Huang, Y.-Q.; Liu, M.-D.; Zeng, Y.-K.; Liu, S.-B. 2001. Progress of study on ZnO thin film and its properties. Wuji Cailiao Xuebao 16: 391-397.
59. Watkins, A. N.; Ligler, F. S. 2000. Patterned deposition of sol-gel thin films using an airbrush. Anal. Lett. 33: 1899-1912.
60. Tiginyanu, I. M.; Kravetsky, I. V.; Langa, S.; Marowsky, G.; Moneckke, J.; Föll, H. 2003. Porous III-V compounds as non linear optical materials. Phys. Stat. Sol. (a) 197: 549-555.
61. Aakeröy, C. B.; Azoz, N. E.; Kadim, M.; Seddon, K. R.; Trowbridge, L. 1993. Novel colorless composite materials for non linear optics. Adv. Mater. 5: 364-367.
62. Ryasnyansky, A. I.; Palpant, B.; Debrus, S.; Khaibullin, R. I.; Stepanov, A. L. 2006. Non linear optical properties of copper nanoparticles synthesized in indium tin oxide matrix by ion implantation. J. Opt. Soc. Am. B 23: 1348-1353.
63. Brolo, A. G.; Kwok, S. C.; Cooper, M. D.; Moffitt, M. G.; Wang, C.- W.; G ordon, R.; Riordon, J.; Kavanagh, K. L. 2006. Surface plasmon-quantum dot coupling from arrays of nanoholes. J. Phys. Chem. B 110: 8307-8313.
64. Ku, C.-H.; Wu, J.-J. 2006. Aqueous solution route to high-aspect-ratio zinc oxide nanostructures on indium tin oxide substrates. J. Phys. Chem. B 110: 12981-12985.
65. Chovancova-Lovell, V.; Pekarovicova, A.; Fleming, P. 2006. Novel phase change inks for printing three-dimensional structures. J. Imaging Sci. Technol. 50: 550-555.
66. Napadensky, E. 2005. Ink-jet 3d printing of photopolymers materials: An emerging rapid prototyping technology. Proceedings-RadTech Europe 05: UV/EB 2: 193-197.
67. Travitzky, N.; Zimmerman, K.; Melcher, R.; Greil, P. 2006. From polysaccharides to SiSiC composites by 3D printing. Ceramic Transactions 175: 37-45.
68. Khoshnevis, B. 2004. Automated construction by contour crafting-related robotic and information technologies. J. Automation in Construction 13: 5-19.
69. Ishida, H. 2002. From artificial photosynthesis to nano-science. Kokagaku 32: 136-143.
70. Ganguly, T.; Pal, S. K. 2006. Photoinduced electron transfer research to build model compounds of artificial photosynthesis and solar energy conversion. J. Chinese Chem. Soc. 53: 219-226.
71. 2 as the photoanode of a hybrid photoelectrochemical biofeul cell. Langmuir 20: 8366-8371.
72. Sun, L.; Hammarstrom, L.; Akermark, B.; Styring, S. 2001. Towards artificial photosythesis: Ruthenium-manganese chemistry for energy production. Chem. Soc. Rev. 30: 36-49.
73. Tributsch, H.; Pohlmann, L. 1995. Synergetic molecular approaches towards artificial and photosynthetic water photoelectrolysis. J. Electroanal. Chem. 396: 53-61.
74. Huang, P.; Kurz, P.; Styring, S. 2007. EPR investigations of synthetic manganese complexes as bio-mimics of the water oxidation complex in photosystem II. Appl. Magn. Reson. 31: 301-320.