Load-bearing capacity of artificially aged zirconia fixed dental prostheses with heterogeneous abutment supports

Clinical Oral Investigations

Volumn 16, Issue 3, 2012, Pages 961-968

  Sarafidou, Katia ^a   Stiesch, Meike ^a   Dittmer, Marc Philipp ^a   Jörn, Daniela ^a   Borchers, Lothar ^a   Kohorst, Philipp ^a  

^a HANNOVER MEDICAL SCHOOL   (Germany)

Author keywords

Artificial ageing; Implant supported prosthesis; Implant tooth interconnected restorations; Load bearing capacity; Zirconia FDPs

Indexed keywords

POLYURETHAN; YTTRIA STABILIZED TETRAGONAL ZIRCONIA; YTTRIUM; ZIRCONIUM;

ANALYSIS OF VARIANCE; ARTICLE; COMPUTER AIDED DESIGN; DENTAL ABUTMENT; DENTAL PORCELAIN; DENTAL PROCEDURE; DENTAL SURGERY; FIXED PARTIAL DENTURE; HUMAN; NONPARAMETRIC TEST; TIME; TOOTH IMPLANT; TOOTH PROSTHESIS; TRANSITION TEMPERATURE; WEIGHT BEARING;

ANALYSIS OF VARIANCE; COMPUTER-AIDED DESIGN; DENTAL ABUTMENTS; DENTAL IMPLANTS; DENTAL MODELS; DENTAL PORCELAIN; DENTAL PROSTHESIS DESIGN; DENTAL PROSTHESIS, IMPLANT-SUPPORTED; DENTAL RESTORATION FAILURE; DENTAL STRESS ANALYSIS; DENTURE, PARTIAL, FIXED; HUMANS; POLYURETHANES; STATISTICS, NONPARAMETRIC; TIME FACTORS; TRANSITION TEMPERATURE; WEIGHT-BEARING; YTTRIUM; ZIRCONIUM;

EID: 84861790933     PISSN: 14326981     EISSN: 14363771     Source Type: Journal    
DOI: 10.1007/s00784-011-0569-0     Document Type: Article

References (34)

1. Hannink R, Kelly PM, Muddle BC (2000) Transformation toughening in zirconia-containing ceramics. J Am Ceram Soc 83: 461-487.
2. Anusavice KJ (2007) Dental ceramics. In: Anusavice KJ (ed) Philipps' science of dental materials. Elsevier Ltd., St. Louis, Missouri, pp 655-721.
3. Borchers L, Stiesch M, Bach FW, Buhl JC, Hubsch C, Kellner T, Kohorst P, Jendras M (2010) Influence of hydrothermal and mechanical conditions on the strength of zirconia. Acta Biomater 6: 4547-4552.
4. Vagkopoulou T, Koutayas SO, Koidis P, Strub JR (2009) Zirconia in dentistry: part 1. Discovering the nature of an upcoming bioceramic. Eur J Esthet Dent 4: 130-151.
5. Papanagiotou HP, Morgano SM, Giordano RA, Pober R (2006) In vitro evaluation of low-temperature aging effects and finishing procedures on the flexural strength and structural stability of Y-TZP dental ceramics. J Prosthet Dent 96: 154-164.
6. Swab JJ (1991) Low temperature degradation of Y-TZP materials. J Mater Sci 26: 6706-6714.
7. Chevalier J (2006) What future for zirconia as a biomaterial? Biomaterials 27: 535-543.
8. Beuer F, Steff B, Naumann M, Sorensen JA (2008) Load-bearing capacity of all-ceramic three-unit fixed partial dentures with different computer-aided design (CAD)/computer-aided manufacturing (CAM) fabricated framework materials. Eur J Oral Sci 116: 381-386.
9. Att W, Grigoriadou M, Strub JR (2007) ZrO2 three-unit fixed partial dentures: comparison of failure load before and after exposure to a mastication simulator. J Oral Rehabil 34: 282-290.
10. Att W, Stamouli K, Gerds T, Strub JR (2007) Fracture resistance of different zirconium dioxide three-unit all-ceramic fixed partial dentures. Acta Odontol Scand 65: 14-21.
11. Kohorst P, Herzog TJ, Borchers L, Stiesch-Scholz M (2007) Load-bearing capacity of all-ceramic posterior four-unit fixed partial dentures with different zirconia frameworks. Eur J Oral Sci 115: 161-166.
12. Kohorst P, Dittmer MP, Borchers L, Stiesch-Scholz M (2008) Influence of cyclic fatigue in water on the load-bearing capacity of dental bridges made of zirconia. Acta Biomater 4: 1440-1447.
13. Rosentritt M, Behr M, van der Zel JM, Feilzer AJ (2009) Approach for valuating the influence of laboratory simulation. Dent Mater 25: 348-352.
14. Dittmer MP, Kohorst P, Borchers L, Stiesch M (2010) Influence of the supporting structure on stress distribution in all-ceramic FPDs. Int J Prosthodont 23: 63-68.
15. Kohorst P, Butzheinen LO, Dittmer MP, Heuer W, Borchers L, Stiesch M (2010) Influence of preliminary damage on the load-bearing capacity of zirconia fixed dental prostheses. J Prosthodont 19: 606-613.
16. Scherrer SS, de Rijk WG (1993) The fracture resistance of all-ceramic crowns on supporting structures with different elastic moduli. Int J Prosthodont 6: 462-467.
17. Rosentritt M, Behr M, Gebhard R, Handel G (2006) Influence of stress simulation parameters on the fracture strength of all-ceramic fixed-partial dentures. Dent Mater 22: 176-182.
18. Della Bona A, Kelly JR (2008) The clinical success of all-ceramic restorations. J Am Dent Assoc 139(Suppl): 8S-13S.
19. Luthy H, Filser F, Loeffel O, Schumacher M, Gauckler LJ, Hammerle CH (2005) Strength and reliability of four-unit all-ceramic posterior bridges. Dent Mater 21: 930-937.
20. Kelly JR, Tesk JA, Sorensen JA (1995) Failure of all-ceramic fixed partial dentures in vitro and in vivo: analysis and modeling. J Dent Res 74: 1253-1258.
21. Drummond J (1989) In vitro aging of yttria-stabilized zirconia. J Am Ceram Soc 72: 675-676.
22. Palmer DS, Barco MT, Billy EJ (1992) Temperature extremes produced orally by hot and cold liquids. J Prosthet Dent 67: 325-327.
23. Kolbeck C, Behr M, Rosentritt M, Handel G (2008) Fracture force of tooth-tooth- and implant-tooth-supported all-ceramic fixed partial dentures using titanium vs. customised zirconia implant abutments. Clin Oral Implants Res 19: 1049-1053.
24. Nothdurft FP, Merker S, Pospiech PR (2010) Fracture behaviour of implant-implant- and implant-tooth-supported all-ceramic fixed dental prostheses utilising zirconium dioxide implant abutments. Clin Oral Investig 15: 89-97.
25. Gale MS, Darvell BW (1999) Thermal cycling procedures for laboratory testing of dental restorations. J Dent 27: 89-99.
26. Schindler HJ, Stengel E, Spiess WE (1998) Feedback control during mastication of solid food textures-a clinical-experimental study. J Prosthet Dent 80: 330-336.
27. Dittmer MP, Kohorst P, Borchers L et al (2010) Stress analysis of an all-ceramic FDP loaded according to different occlusal concepts. J Oral Rehabil 38(4): 278-285.
28. Dittmer MP, Kohorst P, Borchers L, Stiesch-Scholz M (2009) Finite element analysis of a four-unit all-ceramic fixed partial denture. Acta Biomater 5: 1349-1355.
29. Denry I, Kelly JR (2008) State of the art of zirconia for dental applications. Dent Mater 24: 299-307.
30. Ahlberg JP, Kovero OA, Hurmerinta KA, Zepa I, Nissinen MJ, Kononen MH (2003) Maximal bite force and its association with signs and symptoms of TMD, occlusion, and body mass index in a cohort of young adults. Cranio 21: 248-252.
31. Ferrario VF, Sforza C, Zanotti G, Tartaglia GM (2004) Maximal bite forces in healthy young adults as predicted by surface electromyography. J Dent 32: 451-457.
32. Gibbs CH, Mahan PE, Mauderli A, Lundeen HC, Walsh EK (1986) Limits of human bite strength. J Prosthet Dent 56: 226-229.
33. Menicucci G, Mossolov A, Mozzati M, Lorenzetti M, Preti G (2002) Tooth-implant connection: some biomechanical aspects based on finite element analyses. Clin Oral Implants Res 13: 334-341.
34. Vult von Steyern P, Kokubo Y, Nilner K (2005) Use of abutment-teeth vs. dental implants to support all-ceramic fixed partial dentures: an in-vitro study on fracture strength. Swed Dent J 29: 53-60.