Transformation toughening in zirconia-containing ceramics

Journal of the American Ceramic Society

Volumn 83, Issue 3, 2000, Pages 461-487

  Hannink, Richard H J ^a   Kelly, Patrick M ^b   Muddle, Barry C ^c  

^a CSIRO   (Australia)

^b UNIVERSITY OF QUEENSLAND   (Australia)

^c MONASH UNIVERSITY   (Australia)

Author keywords

[No Author keywords available]

Indexed keywords

BRITTLENESS; CRYSTAL MICROSTRUCTURE; CRYSTALLOGRAPHY; FRACTURE TOUGHNESS; PHASE TRANSITIONS; TOUGHENING; ZIRCONIA;

TRANSFORMATION TOUGHENING;

CERAMIC MATERIALS;

EID: 0033873591     PISSN: 00027820     EISSN: None     Source Type: Journal    
DOI: 10.1111/j.1151-2916.2000.tb01221.x     Document Type: Article

References (217)

1. E. Ryshkewitch, Oxide Ceramics: Physical Chemistry and Technology; pp. 350-96. Academic Press, New York, 1960.
2. R. C. Garvie, R. H. J. Hannink, and R. T. Pascoe, "Ceramic Steel?" Nature (London), 258, 703-704 (1975).
3. A. H. Heuer and L. W. Hobbs (Eds.), Advances in Ceramics, Vol. 3, Science and Technology of Zirconia. American Ceramic Society, Columbus, OH, 1981.
4. N. Claussen, M. Rühle, and A. H. Heuer (Eds.), Advances in Ceramics, Vol. 12, Science and Technolog of Zirconia II. American Ceramic Society, Columbus, OH, 1985.
5. S. Sömiya, N. Yamamoto, and H. Yanagida (Eds.), Advances in Ceramics, Vol. 24A and B, Science and Technology of Zirconia III. American Ceramic Society, Westerville, OH, 1988.
6. Science and Technology of Zirconia IV: Abstracts, The First International Ceramic Science and Technology Congress (Anaheim, CA, Oct./Nov. 1989). American Ceramic Society, Westerville, OH, 1989.
7. D. J. Green, R. H. J. Hannink, and M. V. Swain, Transformation Toughening of Ceramics. CRC Press, Boca Raton, FL, 1989.
8. S. P. S. Badwal, M. J. Bannister, and R. H. J. Hannink (Eds.), Science and Technology of Zirconia V. Technomic, Lancaster, PA, 1993.
9. 2-Containing Ceramics," J. Am. Ceram. Soc., 70 [10] 689-98 (1987).
10. A. G. Evans, "Perspective on the Development of High-Toughness Ceramics," J. Am. Ceram. Soc., 73 [2] 187-206 (1990).
11. N. Claussen, "Microstructural Design of Zirconia-Toughened Ceramics (ZTC)"; see Ref. 4, pp. 325-51.
12. A. G. Evans and R. M. Cannon, "Toughening of Brittle Solids by Martensitic Transformations." Acta Metall., 34 [5] 761-800 (1986).
13. D. B. Marshall, A. G. Evans, and M. D. Drory, "Transformation Toughening in Ceramics"; pp. 289-307 in Fracture Mechanics of Ceramics, Vol. 6, Edited by R. C. Bradt, A. G Evans, D. P. H. Hasselman, and F. F. Lange. Plenum Press, New York, 1983.
14. B. L. Karihaloo and J. H. Andreasen, Mechanics of Transformation Toughening and Related Topics. North-Holland Series in Applied Mathematics and Mechanics. Elsevier, New York, 1996.
15. W. M. Kriven, "Shear Transformations in Inorganic Materials"; pp. 1507-32 in Proceedings of an International Conference on Solid-Solid Phase Transformation (Pittsburgh, PA, Aug. 1981). Edited by H. I. Aaronson, D. E. Laughlin, R. F. Sekerka, and C. M. Wayman. Metallurgical Society of AIME, Warrendale, PA, 1982.
16. W. M. Kriven, "Possible Alternative Transformation Tougheners to Zirconia: Crystallographic Aspects," J. Am. Ceram. Soc., 71 [12] 1021-30 (1988).
17. E. H. Kisi and C. J. Howard, "Crystal Structures of Zirconia Phases and Their Interrelation"; pp. 1-36 in Key Engineering Materials. Vols. 153-154, Zirconia Engineering Ceramics: Old Challenges - New Ideas. Edited by E. H. Kisi. TransTech, Uteikon-Zürich, Switzerland, 1998.
18. R. C. Garvie, "Zirconium Dioxide and Some of Its Binary Systems"; Ch. 4, pp. 117-66 in High-Temperature Oxides, Vol. 5-11. Edited by A. M. Alper. Academic Press, New York, 1970.
19. A. G. Evans and A. H. Heuer, "Review - Transformation Toughening in Ceramics: Martensitic Transformations in Crack-Tip Stress Fields," J. Am. Ceram. Soc., 63 [5-6] 241-48 (1980).
20. R. O. Ritchie, "Mechanisms of Fatigue Crack Propagation in Metals, Ceramics, and Composites: Role of Crack Tip Shielding," Mater. Sci. Eng., A103, 15-28 (1988).
21. R. M. McMeeking, "Effective Transformation Strain in Binary Elastic Composites," J. Am. Ceram. Soc., 69 [9] C-301-C-302 (1986).
22. B. Budiansky, J. Hutchinson, and J. Lambropoulos, "Continuum Theory of Dilatant Transformation Toughening in Ceramics," Int. J. Solids Struct., 19 [4] 337-55 (1983).
23. P. F. Becher and M. V. Swain, "Grain-Size-Dependent Transformation Behavior in Polycrystalline Tetragonal Zirconia," J. Am. Ceram. Soc., 75 [3] 493-502 (1992).
24. R. H. J. Hannink and M. V. Swain, "A Mode of Deformation in Partially Stabilized Zirconia," J. Mater. Sci., 16, 1428-31 (1981).
25. R. H. J. Hannink, B. C. Muddle, and M. V. Swain, "Transformation-Induced Plasticity in Tetragonal Zirconia Polycrystals"; pp. 145-52 in Austceram 86, Proceedings of the Twelfth Australian Ceramics Conference (Melbourne, Australia, Aug. 1986). Australian Ceramic Society, Melbourne, Australia, 1986.
26. R. H. J. Hannink and M. V. Swain, "Metastability of the Martensitic Transformation in a 12 mol% Ceria-Zirconia Alloy: I, Deformation and Fracture Observations," J. Am. Ceram. Soc., 72 [1] 90-98 (1989).
27. M. J. Reece, P. L. Tetlow, and C. Galiotis, "Phase Transformation around Indentations in Zirconia," J. Mater. Sci. Lett., 11 [9] 575-77 (1992).
28. F. R. Chien, F. J. Ubic, V. Prakash, and A. H. Heuer, "Stress-Induced Martensitic Transformation and Ferroelaslic Deformation Adjacent Hardness Indents in Tetragonal Zirconia Single Crystals," Acta Mater., 46 [6] 2151-71 (1998).
29. T. Liu, "Characterization of Three-Dimensional Through-Thickness Transformation Zone in 9-mol%-Ce-TZP Ceramics," J. Am. Ceram. Soc., 77 [8] 2203-206 (1994).
30. 2-Stabilized Tetragonal Zirconia Polycrystals: I, Stress Assistance and Autocatalysis," J. Am. Ceram. Soc., 71 [5] 343-53 (1988).
31. M. V. Swain, "Inelastic Deformation of Mg-PSZ and Its Significance for Strength-Toughness Relationship of Zirconia-Toughened Ceramics," Acta Metall., 33 [11] 2083-91 (1985).
32. 2-Stabilized Tetragonal Zirconia Polycrystals: II, Pseudoelasticity and Shape Memory Effect," J. Am. Ceram. Soc., 71 [8] 648-57 (1988).
33. A. G. Evans, "Toughening Mechanisms in Zirconia Alloys"; see Ref. 4, pp. 193-212.
34. J. E. Bailey, "The Monoclinic-Tetragonal Transformation and Associated Twinning in Thin Films of Zirconia," Proc. R. Soc., A, A279 [1376] 395-412 (1964).
35. 2) - I. Metallographic Evidence," Acta Metall., 20 [Jul-Dec] 1281-89 (1972).
36. 2) - II. Crystallographic Aspects," Acta Metall., 22 [Apr] 409-17 (1974).
37. E. C. Subbarao, H. S. Maiti, and K. K. Srivastava, "Martensitk-Transformation in Zirconia," Phys. Status Solidi A, 21 [9] 9-40 (1974).
38. 2," J. Am. Ceram. Soc., 59 [7-8] 351-54 (1976).
39. W. M. Kriven, W. L. Fraser, and S. W. Kennedy, "The Martensite Crystallography of Tetragonal Zirconia"; see Ref. 3, pp. 82-97.
40. M. A. Choudhry and A. G. Cracker, "Theory of Twinning and Transformation Modes in Zirconia"; see Ref 4, pp. 46-53.
41. 2"; see Ref. 4, pp. 14-32.
42. G. H. Bansal and A. H. Heuer, "Precipitation in Partially Stabilized Zirconia," J. Am. Ceram. Soc., 58 [5-6] 235-38 (1975).
43. D. L. Porter and A. H. Heuer, "Microstructural Development in MgO-Partially-Stabilized Zirconia (Mg-PSZ)," J. Am. Ceram. Soc., 62 [5-6] 298-305 (1979).
44. W. M. Kriven, "Martensite Theory and Twinning in Composite Zirconia Ceramics"; see Ref. 3, pp. 168-83.
45. B. C. Muddle and R. H. J. Hannink, "Crystallography of the Tetragonal to Monoclinic Transformation in MgO-Partially-Stabilized Zirconia," J. Am. Ceram. Soc., 69 [7] 547-55 (1986).
46. B. C. Muddle, "Displacive Phase Transformation in Zirconia-Based Ceramics"; pp. 3-16 in Advanced Structural Ceramics, Materials Research Society Symposium Proceedings, Vol. 78 (Boston, MA, Dec. 1986). Edited by P. F. Becher, M. V. Swain, and S. Sōmiya. Materials Research Society, Pittsburgh, PA, 1987.
47. P. M. Kelly, "Martensitic Transformations in Ceramics"; pp. 335-46 in Materials Science Forum, Martensitic Transformations, Part. I, Vols. 56-58, Proceedings of the 6th International Conference (Sydney, Australia, July 1989). Edited by B. C. Muddle. TransTech Publications, Uteikon-Zürich, Switzerland, 1990.
48. R. T. Pascoe, R. H. J. Hannink, and R. C. Garvie, "Strengthening and Microstructural Changes in Magnesia-Zirconia Alloys"; pp. 447-54 in Science of Ceramics, Vol. 9. Edited by K. J. DeVries. Nederlandse Keramische Vereniging, The Netherlands, 1977.
49. P. M. Kelly and C. J. Ball, "Crystallography of Stress-Induced Martensitic Transformations in Partially Stabilized Zirconia," J. Am. Ceram. Soc., 69 [3] 259-64 (1986).
50. G. R. Hugo, B. C. Muddle, and R. H. J. Hannink, "Crystallography of the Tetragonal to Monoclinic Transformation in Ceria-Zirconia"; pp. 165-69 in Ceramic Developments: Past, Present, and Future, Vols. 34-36, Part 1. Edited by C. C. Sorrell and B. Ben-Nissan. Materials Science Forum, Aedermannsdorf, Switzerland, 1988.
51. 2," J. Am. Ceram. Soc., 69 [7] 570-72 (1986).
52. 2 Grains," J. Am. Ceram. Soc., 71 [8] 694-700 (1988).
53. 2 Precipitates," 71 [8] 701-706 (1988).
54. 3 Alloy"; pp. 543-38 in MRS International Meeting on Advanced Materials, Vol. 9. Materials Research Society, Pittsburgh, PA, 1989.
55. 3 - I. Experimental Observations," Acta Metall., 37 [8] 2223-28 (1989).
56. 3 - II. Quantitative Analysis," Acta Metall., 37 [8] 2229-35 (1989).
57. G. R. Hugo and B. C. Muddle, "The Tetragonal to Monoclinic Transformation in Ceria-Zirconia"; see Ref. 46, pp. 357-62.
58. R. H. J. Hannink, G. R. Hugo, and B. C. Muddle, "Reversal of the Tetragonal-Monoclinic Transformation in Ceria-Zirconia"; see Ref. 46, pp. 371-76.
59. 3 Alloy"; see Ref. 46, pp. 363-68.
60. 3 Alloy," Acta Metall. Mater., 38 [9] 1753-59 (1990).
61. B. C. Muddle and G. R. Hugo, "Martensitic Transformations in Ceramics," pp. 647-58 in Proceedings of International Conference on Martensitic Transformations (ICOMAT '92). Edited by C. M. Wayman and J. Perkins. Monterey Institute of Advanced Studies, Monterey, CA, 1993.
62. P. M. Kelly and C. J. Wauchope, "The Tetragonal to Monoclinic Martensitic Transformation in Zirconia"; see Ref. 17, pp. 97-124.
63. C. M. Wayman, Introduction to the Crystallography of Martensitic Transformations. Macmillan, New York, 1964.
64. E. C. Subbarao, "Zirconia - An Overview"; see Ref. 3, pp. 1-24.
65. I. Nettleship and R. Stevens, "Tetragonal Zirconia Polycrystal (TZP) - A Review," Int. J. High Technol. Ceram., 3 [1] 1-32 (1987).
66. 2," Jpn. J. Appl. Phys., Part 2, 159-65 (1989).
67. N. Nakanishi and T. Shigematsu, "Bainite-like Transformation in Zirconia Ceramics," Mater. Trans., JIM, 32, 778-84 (1991).
68. N. Nakanishi and T. Shigematsu, "Bainite-like Transformation in Zirconia Ceramics," Mater. Trans., JIM, 33, 318-23 (1992).
69. G. R. Hugo and B. C. Muddle, "Application of the Crystallographic Theory to the Tetragonal to Monoclinic Transformation in Ceria-Zirconia"; see Ref. 59, pp. 665-70.
70. 2"; Ph.D. Thesis. Monash University, Melbourne, Australia, 1992.
71. 3 Thin Films Produced by rf-CO-Sputtering Method"; see Ref. 46, pp. 377-82.
72. 3," Trans. Jpn. Inst. Met., 27, 750-60 (1986).
73. 2 Alloys"; see Ref. 46, pp. 383-88.
74. R. H. J. Hannink, "Growth Morphology of the Tetragonal Phase in Partially Stabilized Zirconia," J. Mater. Sci, 13 [3] 2487-96 (1978).
75. 2 Particles in Ceramic Matrices," J. Am. Ceram. Soc., 65 [12] 642-50 (1982).
76. W. M. Kriven, "The Transformation Mechanism of Spherical Zirconia Particles in Alumina"; see Ref. 4, pp. 64-77.
77. G. Olson; pp. 391-424 in Deformation, Processing, and Structure, Proceedings of 1982 Conference. American Society for Metals, Metals Park, OH, 1984.
78. J. R. Patel and M. Cohen, "Criterion for the Action of Applied Stress in the Martensitic Transformation," Acta Metall., 1 [Sept.] 531-38 (1953).
79. R. M. McMeeking and A. G. Evans, "Mechanics of Transformation Toughening in Brittle Materials," J. Am. Ceram. Soc., 65 [5] 242-46 (1982).
80. J. Lankford, "Plastic Deformation of Partially Stabilized Zirconia," J. Am. Ceram. Soc., 66 [11] C-212-C-213 (1983).
81. F. F. Lange, "Transformation Toughening - Part 2, Contribution to Fracture Toughness," J. Mater. Sci., 17, 235-39 (1982).
82. D. L. Porter, A. G. Evans, and A. H. Heuer, "Transformation Toughening in Partially Stabilized Zirconia (PSZ)," Acta Metall., 27, 1649-54 (1982).
83. S. D. Antolovich and B. Singh, "On the Toughness Increment Associated with the Austenite to Martensite Phase Transformation in TRIP Steels," Metall. Trans., 2, 2135-41 (1971).
84. W. W. Gerberich, P. L. Hemmings, and V. F. Zackay, "Fracture and Fractography of Metastable Austenites," Metall. Trans., 2, 2243-53 (1971).
85. S. D. Antolovich and D. Fahr, "An Experimental Investigation of the Fracture Characteristics of TRIP Alloys," Eng. Fract. Mech., 4, 133-44 (1972).
86. W. W. Gerberich, P. L. Hemmings, V. F. Zackay, and E. R. Parker, "Interactions Between Crack Growth and Strain-Induced Transformation"; pp. 288-305 in Fracture 1969. Chapman and Hall, London, U.K., 1969.
87. L. R. F. Rose, "The Mechanics of Transformation Toughening," Proc. R. Soc. London, A, 412, 169-97 (1987).
88. D. B. Marshall, M. C. Shaw, R. H. Dauskardt, R. O. Ritchie, M. J. Readey, and A. H. Heuer, "Crack-Tip Transformation Zones in Toughened Zirconia," J. Am. Ceram. Soc., 13, 2659-66 (1990).
89. C. S. Yu, D. K. Shetty, M. C. Shaw, and D. B. Marshall, "Transformation Zone Shape Effects on Crack Shielding in Ceria-Partially-Stabilzed (Ce-TZP)-Alumina Composites," J. Am. Ceram. Soc., 75, 2991-94 (1992).
90. J. C. Amazigo and B. Budiansky, "Steady-State Crack Growth in Supercritically Transforming Materials," Int. J Solids Struct., 24, 751-55 (1988).
91. P. F. Becher, M. V. Swain, and M. K. Ferber, "Relation of Transformation Temperature to the Fracture Toughness of Transformation-Toughened Ceramics," J Mater. Sc., 22, 76-84 (1987).
92. D. L. Porter and A. H. Heuer, "Mechanisms of Toughening in Partially Stabilized Zirconia," J. Am. Ceram. Soc., 60 [3-4] 183-84 (1977).
93. 2 Particles Confined in a Mullite Matrix," J. Am. Ceram. Soc., 66, 123-27 (1983).
94. M. V. Swain and R. H. J. Hannink, "R-Curve Behavior in Zirconia Ceramics"; see Ref. 4, pp. 225-39.
95. D. B. Marshall, "Strength Characteristics of Transformation-Toughened Zirconia," J. Am. Ceram. Soc., 69, 173-80 (1986).
96. K. E. Perry, G. B. May, et al., "Experimental R-Curve Behaviour in Partially Stabilized Zirconia Using Moire Interferometry," Acta Metall. Mater., 41, 361-68 (1993).
97. R-Curve Behavior and Thermal Shock Behavior," J. Am. Ceram. Soc., 75 [11] 3058-64 (1992).
98. R. H. J. Hannink, C. J. Howard, et al., "Relationship between Fracture Toughness and Phase Assemblage in Mg-PSZ," J. Am. Ceram. Soc.. 71, 571-79 (1994).
99. M. V. Swain, "R-Curve Behaviour in Ceramic Materials"; pp. 45-67 in Advanced Ceramics II. Edited by S. Sōmiya. Elsevier Applied Science, New York, 1986.
100. R-Curve Behavior from Transformation Toughening," J. Am. Ceram. Soc., 69, 226-30 (1986).
101. C. S. Yu and D. K. Shetty, "Transformation Zone Shape, Size, and Crack-Growth-Resistance (R-Curve) Behavior of Ceria-Partially-Stabilized Zirconia Polycrystals," J. Am. Ceram. Soc., 72, 921-28 (1989).
102. T. Liu, Y-W. Mai, et al., "Effects of Grain Size and Specimen Geometry on the Transformation and R-Curve Behaviour of 9Ce-TZP Ceramics," J Mater. Sci., 29, 835-43 (1994).
103. 2-TZP," J Mater. Sci, 25, 2025-35 (1990).
104. A. G. Evans, "Transformation Toughening: An Overview," J. Am. Ceram. Soc., 69 [3] iii (1986).
105. J. C. Lambropoulos, "Effect of Nucleation on Transformation Toughening," J. Am. Ceram. Soc., 69 [7] 218-22 (1986).
106. J. C. Lambropoulos, "Shear, Shape, and Orientation Effect in Transformation Toughening," Int. J. Solids Struct., 22, 1083 (1986).
107. I-W. Chen and P. E. Reyes-Morel, "Transformation Plasticity and Transformation Toughening in Mg-PSZ and Ce-TZP," Mater. Res. Soc. Symp. Proc., 78, 75 (1987).
108. 2-Containing Ceramics: I, Shear and Dilatation Effects," J. Am. Ceram. Soc., 69 [3] 181-89 (1986).
109. I-W. Chen, "Model of Transformation Toughening in Brittle Materials," J. Am. Ceram. Soc., 74, 2564-72 (1991).
110. D. M. Stump and B. Budiansky, "Crack-Growth Resistance in Transformation-Toughened Ceramics," Int. J Solids Struct., 25, 635-46 (1989).
111. C. L. Hom and R. M. McMeeking, "Numerical Results for Transformation Toughening in Ceramics," Int. J Solids Struct., 26, 1211-23 (1990).
112. Q. P. Sun, K. C. Hwang, and S. W. Yu, "A Micromechanics Constitutive Model of Transformation Plasticity with Shear and Dilatation Effect," J. Mech. Phys. Solids, 39, 507-24 (1991).
113. G. T. M. Stam and E. Van der Giessen, "Analysis of the Effect of Transformation-Induced Shear Strains on Stability and Crack Growth in Zirconia-Containing Ceramics"; pp. 3-18 in Fracture Mechanics, ASTM STP 1220, 25. Edited by F. Erdogan and R. J. Hartranft. American Society for Testing and Materials, Philadelphia, PA, 1995.
114. G. T. Stam, E. Van der Giessen, and P. Meijers, "Effect of Transformation-Induced Shear Strains on Crack Growth in Zirconia-Containing Ceramics," Int. J. Solids Struct., 31, 1923-48 (1994).
115. G. Stam, "A Micromechancal Approach to Transformation Toughening in Ceramics"; Ph.D. Thesis. Faculty of Mechanical Engineering and Marine Technology, Delft University of Technology, Delft, The Netherlands, 1994 (149 pp.).
116. B. Budiansky and L. Truskinovsky, "On the Mechanics of Stress-Induced Phase Transformations in Zirconia," J Mech. Phys. Solids., 41, 1445-59 (1993).
117. N. Simha and L. Truskinovsky, "Shear-Induced Transformation Toughening in Ceramics," Acta Metall., 42, 3827-36 (1994).
118. 3) Composites," J. Am. Ceram. Soc., 74, 678-81 (1991).
119. D. M. Stump and R. A. La Violette, "Effects of Shear Stresses on Crack-Growth Microstructures in Transformation-Toughened Ceramics," Philos. Mag. A, 68, 35-47 (1993).
120. D. M. Stump, "The Role of Shear Stresses and Shear Strains in Transformation Toughening," Philos. Mag. A, 64, 879-902 (1991).
121. D. M. Stump, "Autocatalysis: The Self-Induced Growth of Martensitic Phase Transformations in Ceramics," Acta Metall. Mater., 42, 3027-33 (1994).
122. 3) Composites Doped with MnO," J. Am. Ceram. Soc., 75, 1229-38 (1992).
123. L. R. F. Rose, "The Size of the Transformed Zone During Steady-Stale Cracking in Transformation-Toughened Materials," J. Mech. Phys. Solids, 34, 609-16 (1986).
124. 2 Polycrystals (Y-TZP)"; see Ref. 4, pp. 352-70.
125. D. S. Dugdale, "Yielding of Steel Sheets Containing Slits," J. Mech. Phys. Solids, 8, 100-104 (1960)
126. L. R. F. Rose and M. V. Swain, "Transformation Zone Shape in Ceria-Partially-Stabilized Zirconia," Acta Metal., 36, 955-62 (1988).
127. K. J. Bowman and I-W. Chen, "Transformation Textures in Zirconia," J. Am. Ceram. Soc., 76 [1] 113-22 (1993).
128. C. J. Wauchope, "Martensitic Transformations in Ceramics"; Ph.D. Thesis. University of Queensland, Australia, 1996.
129. W. J. Batchelor and T. R. Finlayson, "Analysis of Creep-in-Tension Data on Mg-PSZ"; see Ref. 59, pp. 713-18.
130. C. J. Wauchope and P. M. Kelly, "A Model of Stress-Assisted Transformation in Mg-PSZ and Ce-TZP"; see Ref. 17, pp 125-42.
131. I-W. Chen and P. E. Reyes-Morel, "A Comparative Study of Transformation Plasticity and Transformation Toughening in Mg-PSZ and Ce-TZP"; see Ref. 5, pp. 89-104.
132. J. D. Eshelby, "Determination of the Elastic Field of an Ellipsoidal Inclusion and Related Problems," Proc. R. Soc. London, A, 241, 376-96 (1957).
133. M. V. Swain and L. R. F. Rose, "Strength Limitations of Transformation-Toughened Zirconia Alloys," J. Am. Ceram. Soc., 69 [7] 511-18 (1986).
134. 3) Composites Doped with MnO," J. Am. Ceram. Soc., 75 [5] 1229-38 (1992).
135. M. V. Swain and R. H. J. Hannink, "Metastability of the Martensitic Transformation in a 12 mol% Ceria-Zirconia Alloy: II, Grinding Studies," J. Am. Ceram. Soc., 72 [1] 90-98 (1989).
136. 2 Single Crystals"; see Ref. 4, pp. 408-14.
137. 2: Structure, Microstructure, and Fracture Toughness"; see Ref. 4, pp. 131-38.
138. A. V. Virkar and R. L. K. Matsumoto, "Ferroelastic Domain Switching as a Toughening Mechanism in Tetragonal Zirconia," J. Am. Ceram. Soc., 69 [10] C-224-C-226 (1986).
139. A. V. Virkar and R. L. K. Matsumoto, "Toughening Mechanism in Tetragonal Zirconia Polycrystalline (TZP) Ceramics"; see Ref. 5, pp. 653-62.
140. A. V. Virkar, "Role of Ferroelasticity in Toughening of Zirconia Ceramics"; see Ref. 17, pp. 183-210.
141. E. H. Kisi, S. J. Kennedy, and C. J. Howard, "Neutron Diffraction Observations of Ferroelastic Domain Switching and Tetragonal-to-Monoclinic Transformation in Ce-TZP," J. Am. Ceram. Soc., 80 [3] 621-28 (1997).
142. M. V. Swain and R. H. J. Hannink, "Metastability of the Martensitic Transformation in a 12-mol%-Ceria-Zirconia Alloy: II, Grinding Studies," J. Am. Ceram. Soc., 11 [8] 1358-64 (1989).
143. C-J. Chan, F. F. Lange, M. Rühle, J-F. Jue, and A. V. Virkar, "Ferroelastic Domain Switching in Tetragonal Zirconia Single Crystals - Microstructural Aspects," J. Am. Ceram. Soc., 74 [4] 807-13 (1991).
144. 2" Z. Metallkd., 84 [6] 397-404 (1993).
145. (a)R. C. Garvie, "The Occurrence of Metastable Tetragonal Zirconia as a Crystallite Size Effect," J. Phys. Chem., 69 [4] 1238-43 (1965).
146. (b)R. C. Garvie, "Stabilization of the Tetragonal Structure in Zirconia Microcrystals," J. Phys. Chem., 82 [2] 218-24 (1978).
147. R .C. Garvie and M. V. Swain, "Thermodynamics of the Tetragonal to Monoclinic Phase Transformation in Constrained Zirconia Microcrystals, Part 1: In the Absence of an Applied Stress Field," J. Mater. Sci., 20 [4] 1193-200 (1985).
148. D. J. Green, R. H. J. Hannink, and M. V. Swain, "Crystallography and Phase Transformations in Zirconia and Its Alloys"; Ch. 2, pp. 17-55 in Transformation Toughening of Ceramics. CRC Press, Boca Raton, FL, 1989.
149. P. Li, I-W. Chen, and J. E. Penner-Hahn, "Effect of Dopants on Zirconia Stabilization - An X-ray Absorption Study: I, Trivalent Dopants," J. Am. Ceram. Soc., 77 [1] 118-28 (1994).
150. P. Li, I-W. Chen, and J. E. Penner-Hahn, "Effect of Dopants on Zirconia Stabilization - An X-ray Absorption Study: II, Tetravalent Dopants," J. Am. Ceram. Soc., 77 [5] 1281-88 (1994).
151. P. Li, I-W. Chen, and J. E. Penner-Hahn, "Effect of Dopants on Zirconia Stabilization - An X-ray Absorption Study: III, Charge-Compensating Dopants," J. Am. Ceram. Soc., 77 [5] 1289-95 (1994).
152. A. G. Khachaturyan, Theory of Structural Transformations in Solids. Wiley, New York, 1983.
153. 2-MgO System," J. Am. Ceram. Soc., 50, 288-90 (1967).
154. H. G. Scott, "Phase Relationships in the Zirconia-Yttria System," J. Mater. Sci., 10, 1527-35 (1975).
155. J. Drennan and R. H. J. Hannink, "Effect of SrO Additions on the Grain-Boundary Microstructure and Mechanical Properties of Magnesia-Partially-Stabilized Zirconia," J. Am. Ceram. Soc., 69 [7] 541-46 (1986).
156. R. H. J. Hannink, K. A. Johnston, R. T. Pascoe, and R. C. Garvie, "Microstructural Changes During Isothermal Aging of a Calcia-Partially-Stabilized Zirconia Alloy"; see Ref. 3, pp. 116-36.
157. 2 System," Ceram. Int., 6 [1] 19-24 (1980).
158. R. R. Hughan and R. H. J. Hannink, "Precipitation During Controlled Cooling of Magnesia-Partially-Stabilized Zirconia," J. Am. Ceram. Soc., 69 [7] 556-63 (1986).
159. R. H. J. Hannink and B. Lowe, "Characterisation of Secondary Precipitate Growth in Mg-PSZ"; pp. 155-62 in Austceram 86; Proceedings of the Twelfth Australian Ceramics Conference (Melbourne, Australia, Aug. 1986). Australian Ceramic Society, Melbourne, Australia, 1986.
160. R. H. J. Hannink and M. V. Swain, "Magnesia-Partially-Stabilised Zirconia: The Influence of Heat Treatment on Thermomechanical Properties," J. Aust. Ceram. Soc., 18 [2] 53-62 (1982).
161. S. Lathabai and R. H. J. Hannink, "Microstructure-Crack Resistance-Fatigue Correlations in Eutectoid-Aged Mg-PSZ"; see Ref. 5, pp. 360-70.
162. 2 Alloys," J. Mater. Sci., 18, 457-70 (1983).
163. 2," J. Am. Ceram. Soc., 70 [6] 431-440 (1987).
164. 12 in MgO-Partially-Stabilized Zirconia"; see Ref. 4, pp. 139-51.
165. R. H. J. Hannink, C. J. Howard, E. H. Kisi, and M. V. Swam, "Relationship Between Fracture Toughness and Phase Assemblage in Mg-PSZ," J. Am. Ceram. Soc., 77 [2] 571-79 (1994).
166. D. J. Green, R. H. J. Hannink, and M. V. Swain, Transformation Toughening of Ceramics; pp. 124-37. CRC Press, Boca Raton, FL, 1989.
167. T. K. Gupta, J. H. Bechtold, R. C. Kuznicki, L. H. Cadoff, and B. R. Rossing, "Stabilization of Tetragonal Phase in Polycrystalline Zirconia," J. Mater. Sci., 12, 2421-26 (1977).
168. T. K. Gupta, "Sintering of Tetragonal Zirconia and Its Characteristics," Sci. Sintering, 10 [3] 205-16 (1978).
169. C. A. Andersson, J. Greggi Jr., and T. K. Gupta, "Diffusionless Transformations in Zirconia Alloys"; see Ref. 4, pp. 78-85.
170. T. Sakuma, "The Cubic-to-Tetragonal Transformation in Zirconia Alloys"; see Ref. 5, pp. 86-98.
171. R. A. Miller, L. James, J. L. Smialek, and R. G. Garlick, "Phase Stability in Plasma-Sprayed, Partially Stabilized Zirconia-Yttria"; see Ref. 3, pp. 241-53.
172. M. Matsui, T. Soma, and I. Oda, "Effect of Microstructure on the Strength of Y-TZP Components"; see Ref. 4, pp. 371-81.
173. 2 Polycrystals by Annealing in Water," J. Am. Ceram. Soc., 68 [6] 356-59 (1985).
174. 3-Stabilized Tetragonal-Zirconia Polycrystals"; see Ref. 4, pp. 382-90.
175. T. A. Michalske and S. W. Freiman, "A Molecular Mechanism for Stress Corrosion in Vitreous Silica," J. Am. Ceram. Soc., 66 [4] 284-88 (1983).
176. S. Schmauder and H. Schubert, "Significance of Internal Stresses for the Martensitic Transformation in Yttria-Stabilized Tetragonal-Zirconia Polycrystals During Degradation," J. Am. Ceram. Soc., 69 [7] 534-40 (1986).
177. M. Yoshuimura, T. Noma, K. Kawabata, and S. Sōmiya, "Role of Water on the Degradation Process of Y-TZP," J. Mater. Sci. Lett., 6, 465-67 (1987).
178. 2O, Materials at 250°C," J. Am. Ceram. Soc., 69 [3] 327-40 (1986).
179. 2 Polycrystals by Annealing under Controlled Humidity Conditions," J. Am. Ceram. Soc., 68 [12] C-320-C-322 (1985).
180. S. Iio, M. Watanabe, K. Kuroda, and H. Imura, "Tetragonal-to-Monclinic Transformation in Y-TZP during Low-Temperature Aging, and Its Restraint by Coating"; see Ref. 5, pp. 49-54.
181. N. Ohmichi, K. Kamioka, K. Ueda, K. Matsui, and M. Ohgai, "Phase Transformation of Zirconia Ceramics by Annealing in Hot Water," J. Ceram. Soc. Jpn., 107 [2] 128-33 (1999).
182. M. Watanabe, S. Iio, and J. Fukuura, "Aging Behavior of Y-TZP"; see Ref. 4, pp. 391-98.
183. E. Lilley, "Review of Low-Temperature Degradation in Y-TZPs"; pp. 387-407 in Proceedings of the Symposium on Corrosion and Corrosive Deffradation of Ceramics, First Ceramic Science and Technology Congress of The American Ceramic Society (Anaheim, CA, Nov. 1989). Edited by R. E. Tressler and M. McNallan. American Ceramic Society, Westerville, OH, 1990.
184. R. H. J. Hannink and M. V. Swain, "Progress in Transformation Toughening of Ceramics," Ann. Rev. Mater. Sci., 24, 359-408 (1994).
185. A. J. A. Winnubst and A. J. Burggraaf, "The Aging Behavior of Ultrafine-Grained Y-TZP in Hot Water"; see Ref. 5, pp. 39-47.
186. 2 Polycrystals (Ce-TZP)," J. Mater. Sci., 20 [4] 1178-84 (1985).
187. 2-Containing Tetragonal-Zirconia Polycrystals," Am. Ceram. Soc. Bull., 65 (10) 1386-89 (1986).
188. D. J. Green, R. H. J. Hannink, and M. V. Swain, "Microstructure-Mechanical Behavior of Partially Stabilized Zirconia (PSZ) Materials"; Ch. 5, pp. 157-97 in Transformation Toughening of Ceramics. CRC Press, Boca Raton, FL, 1989.
189. 2 Dispersed Phase," J. Am. Ceram. Soc., 59 [1-2] 49-51 (1976).
190. N. Claussen, J. Steeb, and R. F. Pabst, "Effect of Induced Microcracking on the Fracture Toughness of Ceramics," Am. Ceram. Soc. Bull., 56 [6] 559-62 (1977).
191. F. F. Lange, "Transformation Toughening, Part 5: Effect of Temperature and Alloy on Fracture Toughness," J. Mater. Sci., 17 [1] 255-62 (1982).
192. 3) Ceramics," J. Am. Ceram. Soc., 66 [7] 485-88 (1983).
193. M. Rühle, A. G. Evans, R. M. McMeeking, P. G. Charalambides, and J. W. Hutchinson, "Microcrack Toughening in Alumina/Zirconia," Acta Metall., 35 [11] 2701-10 (1987).
194. 3 Composites"; pp. 123-35 in Advanced Structural Ceramics, Vol. 78. Edited by P. F. Becher, M. V. Swain, and S. Sōmiya. Materials Research Society, Pittsburgh, PA, 1987.
195. T. Watanabe and K Shoubu, "Mechanical Properties of Hot-Pressed
196. 3) Compositions," J. Mater. Res., 2 [1] 66-76 (1987).
197. 2"; see Ref. 5, pp. 1123-29.
198. 3"; see Ref. 5, pp. 1015-21.
199. 2 Composites"; sec Ref. 5, pp. 1091-99.
200. 2-ZrN"; see Ref. 4, pp. 164-73.
201. R. C. Garvie and M. F. Goss, "Thermal Shock Resistant Alumina/Zirconia Alloys"; pp. 69-87 in Advanced Ceramics II. Edited by S. Sōmiya. Elsevier Applied Science, London/New York, 1988.
202. R. C. Garvie, M. F. Goss, S. Marshall, and C. Urbani, "Advances in Refractories," Proc. Can. Inst. Min. Metall., 4, 53-69 (1988).
203. M. V. Swain, "R-Curve Behavior and Thermal Shock Resistance of Ceramics," J. Am. Ceram. Soc., 73 [3] 621-28 (1990).
204. R-Curve Behavior of Duplex Ceramics," J. Ceram. Soc., 74 [1] 11-18 (1991).
205. (b)E. H. Lutz, N. Claussen, and M. V. Swain, "Thermal Shock Behavior of Duplex Ceramics," J. Am. Ceram. Soc., 74 [1] 19-24 (1991).
206. E. H. Lutz and M. V. Swain, "Mechanical and Thermal Shock Properties of Duplex Ceramics," Mater. Forum, 15 [4] 307-23 (1991).
207. N. Claussen and J. Steeb, "Toughening of Ceramic Composites by Oriented Nucleation of Microcracks," J. Am. Ceram. Soc., 59 [9-10] 457-58 (1976).
208. 3," J. Am. Ceram. Soc., 74 [12] 2979-87 (1991).
209. D. B. Marshall, "Design of High-Toughness Laminar Zirconia Composites," Am. Ceram. Soc. Bull., 71 [6] 969-73 (1992).
210. 3 Ceramics"; see Ref. 5, pp. 517-23.
211. P. Sarkar, X. Haung, and P. S. Nicholson, "Structural Ceramic Microlaminates by Electrophoretic Deposition," J. Am. Ceram. Soc., 75 [10] 2907-909 (1992).
212. 2-Based Ceramic Composites ≥1300°C by Electrophoretic Deposition"; see Ref. 5, pp. 503-16.
213. J. F. Knott, Fundamentals of Fracture Mechanics: p. 126. Butterworths, London, U.K., 1976,
214. B. R. Lawn, Fracture of Brittle Solids, 2nd ed.; pp. 72-79. Cambridge University Press, Cambridge, U.K., 1992.
215. R. W. Steinbrech, "Toughening Mechanisms in Ceramic Materials," J. Eur. Ceram. Soc., 10, 131-42 (1992).
216. A. G. Atkins and Y-W. Mai, Elastic and Plastic Fracture: p. 652. Wiley, Brisbane, Australia, 1985.
217. M. J. Hoffman, R. H. Dauskardt, Y-W. Mai, and R. O. Ritchie, "A Review of the Mechanics and Mechanisms of Cyclic Fatigue-Crack Propagation in Transformation-Toughened Zirconia Ceramics"; pp. 321-38 in Science and Technology of Zirconia. Technomic, Lancaster, PA, 1993.